ADS822E/1K - 10-Bit 40-MSPS ADC | Industrial Sensing
MPN: ADS822E/1K ✓ 啟用中ADS822E/1K 概覽
An ADC is a data-acquisition IC that converts continuous analog voltage into a digital code. The ADS822 family belongs to the pipelined ADC hierarchy, where a multistage conversion architecture supports high sampling rates while providing a parallel interface for direct connection to digital logic, processors, or FPGA input blocks. The ADS822E/1K is one channel, so it samples one analog input at each conversion rather than multiplexing multiple channels internally.
Three defining specifications are its 10-bit resolution, 40 MSPS maximum sampling rate, and 300 MHz analog input bandwidth. The 10-bit result represents each conversion with 1024 codes, while the 40 MSPS rate supports acquisition of high-bandwidth waveforms. The 300 MHz input bandwidth reduces the need for heavy external low-pass filtering, although the selected filter must still control aliasing and out-of-band energy.
The ADS822E/1K uses a parallel CMOS interface and supports internal or external reference options. These features provide flexibility when the converter is paired with an FPGA, a digital signal processor, or a precision data-acquisition controller. Because the parallel interface transfers multiple bits simultaneously, board routing must account for timing skew and simultaneous switching noise across the digital output bus.
Typical applications include vibration monitoring, industrial waveform capture, communications signal analysis, ultrasound receive channels, and laboratory instrumentation. The device is especially relevant when a 40 MSPS conversion rate is sufficient but 75 MSPS performance is unnecessary. In such systems, the ADC can capture repetitive or single-shot analog waveforms before conversion and digital processing.
The primary design trade-off is interface timing rather than package capacity. Use controlled-impedance routing, short parallel traces, and a solid ground reference to preserve data integrity at the maximum conversion rate. External decoupling, a stable reference arrangement, and input filtering should follow the manufacturer’s recommended application circuit.
This page combines the manufacturer’s device specifications with same-family, pin-compatible upgrade options and practical implementation guidance. It helps engineers distinguish functional upgrades from drop-in choices, assess interface requirements, and select the appropriate ADC speed and package for a new design.
直接替換替代品,適用於 ADS822E/1K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS822E/1K (相同外形與佔位) — 差異在於 Package, Architecture, Operating Temperature, Input Type, Resolution.
ADS825E
✅ 直接替換聯絡詢價
查看資料表 →ADS823E
✅ 直接替換聯絡詢價
查看資料表 →ADS826E
✅ 直接替換聯絡詢價
查看資料表 →ADS8284IRGCR
✅ 直接替換聯絡詢價
查看資料表 →ADS822E/1K 最大額定值與電氣特性
| 解析度 | 10 bit |
| Maximum Sampling Rate | 40 MSPS |
| Number of Input Channels | 1 channel |
| Conversion Architecture | 1 pipelined stage |
| Input Configuration | Single-ended or differential |
| Analog Input Range | 1.5 V to 3.5 V |
| Analog Input Bandwidth | 300 MHz |
| Digital Interface | Parallel CMOS |
| Reference Configuration | Internal or external reference |
| Power Saving Feature | Low power |
| 封裝 | SSOP-28 (DB), 28 pins |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
| Device Classification | Data-acquisition and signal-processing IC |
| Catalog Status | Catalog |
ADS822E/1K ssop-28 (db), 28 pins 腳位配置指南
ADS822E/1K(ssop-28 (db), 28 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS822E/1K.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS822E/1K 適用於 6 應用s: Industrial Vibration Monitoring, Communications Signal Analysis, Medical Ultrasound Receive Channels, Test and Measurement Instrumentation, Ultrasound and Acoustic Signal Capture, Portable Data Acquisition.
Industrial Vibration Monitoring
The ADS822E/1K suits vibration and condition-monitoring systems that require repeatable sampling of transient mechanical signals. Its 10-bit resolution and 40 MSPS maximum conversion rate capture substantially more points across a waveform than a low-rate instrumentation ADC, while the 300 MHz analog input bandwidth provides headroom for the sensor amplifier and anti-alias filter. The parallel CMOS output can feed an FPGA for real-time spectral processing. Designers should place the analog driver close to the converter, control return paths, and validate filter phase response against the intended analysis bandwidth.
推薦
Communications Signal Analysis
The ADS822E/1K can serve as the front-end converter in communications test equipment that must capture amplitude and phase information from an IF or baseband waveform. Its 40 MSPS sampling capability and 300 MHz input bandwidth provide a useful balance between conversion performance and implementation complexity, while the 10-bit parallel output is suitable for FPGA-based demodulation or filtering. The analog input range of 1.5 V to 3.5 V must be respected through appropriate gain and offset design. A steep low-pass filter should be selected when out-of-band content could alias into the measurement band.
推薦
Medical Ultrasound Receive Channels
The ADS822E/1K is applicable to multi-channel medical ultrasound systems when each receive path can use a dedicated 10-bit converter. At 40 MSPS, the device supports acquisition of echo waveforms while the 300 MHz analog input bandwidth accommodates the bandwidth of a carefully designed ultrasound preamplifier and anti-alias network. Parallel CMOS outputs can connect to a channel-oriented FPGA interface. Because every added converter contributes power and board area, system designers should evaluate channel synchronization, thermal performance, grounding, and regulatory requirements before finalizing the architecture.
推薦
Test and Measurement Instrumentation
The ADS822E/1K fits laboratory and portable instrumentation that requires fast conversion without the data rate of a high-end waveform instrument. A 10-bit code width can represent an acquired waveform using 1024 levels, and the 40 MSPS rate supports short sampling windows for transient and repetitive measurements. The parallel interface allows an FPGA to perform triggering, filtering, decimation, and peak detection. For instruments requiring greater vertical accuracy, noise averaging or a higher-resolution converter may be more appropriate, so engineers should evaluate the required effective number of bits rather than resolution alone.
推薦
Ultrasound and Acoustic Signal Capture
The ADS822E/1K can capture acoustic or ultrasonic waveforms in equipment where a dedicated converter is used per sensing channel. Its 300 MHz analog input bandwidth is considerably higher than the 40 MSPS Nyquist rate, allowing the frontend to preserve useful signal content while an external filter controls aliasing. The single-ended or differential input capability supports different transducer amplifier architectures, and the parallel digital interface provides straightforward connection to FPGA acquisition logic. Layout should prioritize low-noise reference distribution, short analog routes, and matched digital timing across channels.
推薦
Portable Data Acquisition
The ADS822E/1K is suitable for compact, battery-powered acquisition modules where a parallel ADC must operate near the input connector rather than deep inside a chassis. Its 28-pin SSOP package provides a practical routing option, and the 40 MSPS rate is suitable for capturing compact bursts of sensor data. The 10-bit interface can be captured directly by an FPGA or transferred into a buffer before wireless transmission. Power, reference startup, clock jitter, and thermal rise should be evaluated in the final enclosure because battery-operated designs often operate away from ideal laboratory cooling and supply conditions.
推薦
推薦產品摘要
工程參考資料,適用於 ADS822E/1K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS825E | ADS823 | ADS826 | ADS828 |
|---|---|---|---|---|---|
| Package | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Maximum Sampling Rate | 40 MSPS | 40 MSPS | 60 MSPS | 60 MSPS | 75 MSPS |
主要差異化特點
- Matches the 40 MSPS baseline of the ADS825 family (對比ADS825E)
- Lower conversion rate than the 60 MSPS upgrade options (對比ADS823)
- Lower conversion rate than the 60 MSPS ADS826 (對比ADS826)
設計說明
Route the 10-bit parallel output as a short, continuous bus to the FPGA or acquisition logic. Match output-to-input delay across the data bits and clock, keep the clock away from sensitive analog and reference nodes, and use a solid ground plane for return-current control. The manufacturer’s application circuit should be used as the basis for decoupling placement and signal ordering.
Do not select an ADC solely by its 40 MSPS conversion rate. The analog front end, anti-alias filter, reference network, clock source, and receiver must all support the intended measurement bandwidth. The ADS822E/1K has a 300 MHz analog input bandwidth, so an unsuitable external filter can alias out-of-band energy into the sampled data even though the converter itself is operating correctly.
Place the input, reference, and bypass capacitors close to their associated pins, and provide a low-impedance return to the device ground. Validate the reference network for startup, noise, and temperature behavior across the operating range. When upgrading from 40 MSPS to the 60 MSPS or 75 MSPS family members, recalculate clock, output-timing, power, and thermal margins because the additional throughput changes system requirements.
Treat the parallel output as a synchronous high-speed bus even though the conversion rate is 40 MSPS. Use a controlled clock source, avoid stubs, provide adequate series damping where needed, and establish receiver timing margins before fabrication. Differential and single-ended input modes should be evaluated with the same amplifier bandwidth and common-mode assumptions rather than treating them as automatic substitutes.
合規資訊
The manufacturer product page confirms an operating range of -40 °C to +85 °C and catalog ordering information. RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations are not stated in the referenced product information.