Texas Instruments

ADS822E/1K - 10-Bit 40-MSPS ADC | Industrial Sensing

부품 번호: ADS822E/1K ✓ 활성
SSOP-28 (DB), 28 pins Package
MOQ: 1 |

ADS822E/1K 개요

The Texas Instruments ADS822E/1K is a 10-bit, single-channel, 40-MSPS pipelined analog-to-digital converter with single-ended or differential inputs, a parallel CMOS interface, and a 28-pin SSOP (DB) package. Its 1.5 V to 3.5 V input range, 300 MHz analog input bandwidth, and support for internal or external references make it suitable for precision signal acquisition in industrial, communications, and test equipment.

An ADC is a data-acquisition IC that converts continuous analog voltage into a digital code. The ADS822 family belongs to the pipelined ADC hierarchy, where a multistage conversion architecture supports high sampling rates while providing a parallel interface for direct connection to digital logic, processors, or FPGA input blocks. The ADS822E/1K is one channel, so it samples one analog input at each conversion rather than multiplexing multiple channels internally.

Three defining specifications are its 10-bit resolution, 40 MSPS maximum sampling rate, and 300 MHz analog input bandwidth. The 10-bit result represents each conversion with 1024 codes, while the 40 MSPS rate supports acquisition of high-bandwidth waveforms. The 300 MHz input bandwidth reduces the need for heavy external low-pass filtering, although the selected filter must still control aliasing and out-of-band energy.

The ADS822E/1K uses a parallel CMOS interface and supports internal or external reference options. These features provide flexibility when the converter is paired with an FPGA, a digital signal processor, or a precision data-acquisition controller. Because the parallel interface transfers multiple bits simultaneously, board routing must account for timing skew and simultaneous switching noise across the digital output bus.

Typical applications include vibration monitoring, industrial waveform capture, communications signal analysis, ultrasound receive channels, and laboratory instrumentation. The device is especially relevant when a 40 MSPS conversion rate is sufficient but 75 MSPS performance is unnecessary. In such systems, the ADC can capture repetitive or single-shot analog waveforms before conversion and digital processing.

The primary design trade-off is interface timing rather than package capacity. Use controlled-impedance routing, short parallel traces, and a solid ground reference to preserve data integrity at the maximum conversion rate. External decoupling, a stable reference arrangement, and input filtering should follow the manufacturer’s recommended application circuit.

This page combines the manufacturer’s device specifications with same-family, pin-compatible upgrade options and practical implementation guidance. It helps engineers distinguish functional upgrades from drop-in choices, assess interface requirements, and select the appropriate ADC speed and package for a new design.

드롭인 대체품: ADS822E/1K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADS822E/1K (동일 폼 팩터 및 풋프린트) — 차이점: Package, Architecture, Operating Temperature, Input Type, Resolution.

Texas Instruments
Package: 28-SSOP (5.30 mm)
Architecture: Pipelined
Operating Temperature: -40 C to +85 C
Texas Instruments
Package: 28-pin SSOP
Architecture: Pipelined ADC
Operating Temperature: -40C to +85C
Texas Instruments
Package: 28-pin SSOP
Architecture: Pipelined
Operating Temperature: -40 C to +85 C
Texas Instruments
Package: 28-pin SSOP
Operating Temperature: -40 °C to +85 °C
Texas Instruments
Package: 28-SSOP
Architecture: Pipelined ADC
Input Type: Single-ended or differential
Texas Instruments
Package: 64-pin VQFN (RGC), 9 mm x 9 mm
Architecture: SAR (Successive Approximation Register)
Input Type: Pseudo-bipolar differential

ADS825E

✅ 드롭인
Texas Instruments
📦 SSOP-28 (DB)
10 bit · 40 MSPS · Pipelined · Single-ended or differential · 1 input · Internal or external · 60 dB · 72 dBFS

가격 문의

데이터시트 보기 →

ADS823E

✅ 드롭인
Texas Instruments
📦 SSOP-28 (DB)
10 bit · 60 MSPS · 1 · Pipelined ADC · Single-ended or differential · 60 dB · 74 dBFS · 0.25 LSB

가격 문의

데이터시트 보기 →

ADS826E

✅ 드롭인
Texas Instruments
📦 SSOP-28 (DB)
10 bit · 60 MSPS · Pipelined ADC · 1 input · Single-ended or differential · 60 dB · 74 dBFS · 0.25 LSB

가격 문의

데이터시트 보기 →

ADS8284IRGCR

✅ 드롭인
Texas Instruments
📦 SSOP-28 (DB)
18 bits · 1 MSPS · 4 differential · SAR (Successive Approximation Register) · Pseudo-bipolar differential · 4-channel · Yes (integrated OPA) · 4 V internal

가격 문의

데이터시트 보기 →

ADS822E/1K 최대 정격 & 전기적 특성

분해능 10 bit
Maximum Sampling Rate 40 MSPS
Number of Input Channels 1 channel
Conversion Architecture 1 pipelined stage
Input Configuration Single-ended or differential
Analog Input Range 1.5 V to 3.5 V
Analog Input Bandwidth 300 MHz
Digital Interface Parallel CMOS
Reference Configuration Internal or external reference
Power Saving Feature Low power
패키지 SSOP-28 (DB), 28 pins
실장 유형 Surface mount
동작 온도 범위 -40 °C to +85 °C
Device Classification Data-acquisition and signal-processing IC
Catalog Status Catalog

ADS822E/1K ssop-28 (db), 28 pins 핀 구성 가이드

ADS822E/1K(ssop-28 (db), 28 pins 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ADS822E/1K의 ssop-28 (db), 28 pins 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADS822E/1K.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADS822E/1K 적합 용도: 6 애플리케이션s: Industrial Vibration Monitoring, Communications Signal Analysis, Medical Ultrasound Receive Channels, Test and Measurement Instrumentation, Ultrasound and Acoustic Signal Capture, Portable Data Acquisition.

🏭

Industrial Vibration Monitoring

The ADS822E/1K suits vibration and condition-monitoring systems that require repeatable sampling of transient mechanical signals. Its 10-bit resolution and 40 MSPS maximum conversion rate capture substantially more points across a waveform than a low-rate instrumentation ADC, while the 300 MHz analog input bandwidth provides headroom for the sensor amplifier and anti-alias filter. The parallel CMOS output can feed an FPGA for real-time spectral processing. Designers should place the analog driver close to the converter, control return paths, and validate filter phase response against the intended analysis bandwidth.

🌐

Communications Signal Analysis

The ADS822E/1K can serve as the front-end converter in communications test equipment that must capture amplitude and phase information from an IF or baseband waveform. Its 40 MSPS sampling capability and 300 MHz input bandwidth provide a useful balance between conversion performance and implementation complexity, while the 10-bit parallel output is suitable for FPGA-based demodulation or filtering. The analog input range of 1.5 V to 3.5 V must be respected through appropriate gain and offset design. A steep low-pass filter should be selected when out-of-band content could alias into the measurement band.

💊

Medical Ultrasound Receive Channels

The ADS822E/1K is applicable to multi-channel medical ultrasound systems when each receive path can use a dedicated 10-bit converter. At 40 MSPS, the device supports acquisition of echo waveforms while the 300 MHz analog input bandwidth accommodates the bandwidth of a carefully designed ultrasound preamplifier and anti-alias network. Parallel CMOS outputs can connect to a channel-oriented FPGA interface. Because every added converter contributes power and board area, system designers should evaluate channel synchronization, thermal performance, grounding, and regulatory requirements before finalizing the architecture.

🖥️

Test and Measurement Instrumentation

The ADS822E/1K fits laboratory and portable instrumentation that requires fast conversion without the data rate of a high-end waveform instrument. A 10-bit code width can represent an acquired waveform using 1024 levels, and the 40 MSPS rate supports short sampling windows for transient and repetitive measurements. The parallel interface allows an FPGA to perform triggering, filtering, decimation, and peak detection. For instruments requiring greater vertical accuracy, noise averaging or a higher-resolution converter may be more appropriate, so engineers should evaluate the required effective number of bits rather than resolution alone.

🔊

Ultrasound and Acoustic Signal Capture

The ADS822E/1K can capture acoustic or ultrasonic waveforms in equipment where a dedicated converter is used per sensing channel. Its 300 MHz analog input bandwidth is considerably higher than the 40 MSPS Nyquist rate, allowing the frontend to preserve useful signal content while an external filter controls aliasing. The single-ended or differential input capability supports different transducer amplifier architectures, and the parallel digital interface provides straightforward connection to FPGA acquisition logic. Layout should prioritize low-noise reference distribution, short analog routes, and matched digital timing across channels.

📱

Portable Data Acquisition

The ADS822E/1K is suitable for compact, battery-powered acquisition modules where a parallel ADC must operate near the input connector rather than deep inside a chassis. Its 28-pin SSOP package provides a practical routing option, and the 40 MSPS rate is suitable for capturing compact bursts of sensor data. The 10-bit interface can be captured directly by an FPGA or transferred into a buffer before wireless transmission. Power, reference startup, clock jitter, and thermal rise should be evaluated in the final enclosure because battery-operated designs often operate away from ideal laboratory cooling and supply conditions.

추천 제품 요약

ADS825E Texas Instruments 사용처: Industrial Vibration Monitoring, Medical Ultrasound Receive Channels, Test and Measurement Instrumentation, Portable Data Acquisition ADS823 Higher-speed upgrade for increased acquisition throughput 사용처: Industrial Vibration Monitoring, Medical Ultrasound Receive Channels, Ultrasound and Acoustic Signal Capture ADS826 60 MSPS family upgrade for wider bandwidth designs 사용처: Communications Signal Analysis, Test and Measurement Instrumentation, Portable Data Acquisition ADS828 75 MSPS family upgrade for higher-throughput capture 사용처: Communications Signal Analysis, Ultrasound and Acoustic Signal Capture
What are the key specifications of ADS822E/1K that engineers should know?
The ADS822E/1K is a 10-bit, single-channel ADC capable of 40 MSPS with a 300 MHz analog input bandwidth. According to the Texas Instruments ADS822 product page, the device uses a pipelined architecture, accepts single-ended or differential input, supports internal or external references, and provides a parallel CMOS output. It is packaged in a 28-pin SSOP and rated for operation from -40 °C to +85 °C.
What is the ADS822E/1K used for?
The ADS822E/1K is used for high-speed analog signal acquisition when 10-bit resolution and a maximum conversion rate of 40 million samples per second are sufficient. Its 300 MHz input bandwidth suits waveform capture, communications analysis, vibration monitoring, and laboratory instrumentation. The parallel CMOS interface permits direct connection to suitable FPGA, DSP, or data-acquisition logic.
What analog input voltage range does ADS822E/1K support?
The ADS822E/1K supports a single-ended input range of 1.5 V to 3.5 V, and the family also supports differential input configurations. According to the Texas Instruments ADS822 product documentation, the selected input mode and common-mode arrangement must match the application circuit, with the frontend designed to keep the analog node within the converter’s permitted range.
How fast can ADS822E/1K sample an analog signal?
The ADS822E/1K has a maximum sampling rate of 40 MSPS. According to the Texas Instruments ADS822 product page, it is a 10-bit pipelined ADC with 300 MHz analog input bandwidth. A 40 MSPS conversion rate can capture substantially faster waveforms than a low-speed instrumentation ADC, although practical bandwidth is also determined by the driver, reference, filter, and digital acquisition system.
Where can I download the ADS822E/1K datasheet and find its pinout?
The official Texas Instruments ADS822 product page is the primary starting point for the ADS822E/1K datasheet and ordering information. Use the manufacturer’s pin-description table when assigning SSOP-28 connections and the application diagrams when planning input, reference, decoupling, and digital-interface connections. This page links to the official product resources rather than reproducing the pin table.
Where can I buy ADS822E/1K online?
The ADS822E/1K can be requested through XAIPART’s Request a Quote form on this page. The form should be used to confirm current stock, exact suffix requirements, quantity, and lead time for the Texas Instruments 28-pin SSOP device. It provides a direct purchasing path without relying on stale pricing or inventory information.
What is the price of ADS822E/1K?
The current price of ADS822E/1K is established through XAIPART’s Request a Quote form. Submit the required quantity, target packaging, delivery location, and production schedule to obtain a current quotation. This approach keeps the commercial response tied to the exact ADS822E/1K order rather than a family-level or starting-price listing.
What is the lead time and stock status for ADS822E/1K?
Current lead time and stock status for ADS822E/1K should be confirmed through the Request a Quote form on this page. Provide the required order quantity and planned delivery date, and request confirmation of the exact Texas Instruments ordering suffix. This allows the quotation and schedule to reflect current procurement conditions.
ADS822E/1K vs ADS825E - which is better for a 40 MSPS design?
The ADS822E/1K is preferable when 40 MSPS and 10-bit resolution satisfy the application, because it matches the original design target rather than adding unused conversion capability. According to Texas Instruments, ADS822 and ADS825 are available in the SSOP-28 family and are associated with the same pin-compatible upgrade path. ADS825E can be considered when a faster-family option provides a practical benefit.
What is the difference between ADS822E/1K and ADS823 or ADS826?
The ADS822E/1K converts at up to 40 MSPS, while ADS823 and ADS826 are identified by Texas Instruments as 10-bit, 60 MSPS devices in the same SSOP-28 family. The documented pin compatibility provides an upgrade path for designs requiring higher throughput. The change is not merely a package substitution: clocking, acquisition timing, output timing, power, and thermal requirements must be revalidated at 60 MSPS.
When should I choose ADS822E/1K over ADS825E?
Choose ADS822E/1K when a 40 MSPS maximum rate, 10-bit resolution, and 28-pin SSOP interface meet the acquisition requirement without leaving a meaningful performance gap. Choose ADS825E when its additional capability justifies the change and the supporting circuitry has been evaluated. The most defensible choice is based on required bandwidth, acquisition time, system timing, thermal margin, and software compatibility.
Is ADS822E/1K suitable for industrial signal acquisition?
Yes, ADS822E/1K is suitable for industrial signal acquisition when the application requires no more than 40 MSPS and can operate within -40 °C to +85 °C. Its 10-bit resolution, 300 MHz analog input bandwidth, and parallel interface suit waveform and communications measurement systems. Industrial qualification requirements beyond the stated temperature range should be checked separately before release.
What can replace ADS822E/1K as a pin-compatible upgrade?
ADS825E, ADS823, ADS826, and ADS828 are documented by Texas Instruments as SSOP-28 family upgrade options for the ADS822 and ADS825 family. Their sampling rates are 40 MSPS, 60 MSPS, 60 MSPS, and 75 MSPS, respectively. They can simplify PCB reuse, but the increased rate changes acquisition timing and may require revised clocking, layout, thermal, and validation.
Is ADS822E/1K the same as an ADS825E equivalent?
No, ADS822E/1K and ADS825E are related family members rather than identical devices. Both are 10-bit converters associated with the SSOP-28 pin-compatible family, but they are separate orderable devices whose acquisition and timing requirements must be compared. Texas Instruments identifies ADS823, ADS826, and ADS828 as higher-speed upgrade options for the ADS822 and ADS825 family.
What is the best cross-brand drop-in replacement for ADS822E/1K?
No cross-brand drop-in replacement is established for ADS822E/1K by the documented pin and parameter information for this product. Texas Instruments specifically identifies ADS825E, ADS823, ADS826, and ADS828 as compatible SSOP-28 family options. A competitor part should be selected only after its pinout, 10-bit conversion behavior, 40 MSPS-class timing, reference requirements, and power characteristics are verified in detail.

엔지니어링 참조 데이터: ADS822E/1K — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ADS822E/1K when the acquisition system specifically needs a 10-bit converter with a 40 MSPS maximum rate and an SSOP-28 parallel interface. It is a sensible baseline for vibration monitoring, communications analysis, ultrasound channels, and compact data-acquisition modules where higher conversion speed would add timing and validation work without improving the measured signal. Consider ADS825E when a same-speed family option offers a different orderable configuration, and verify its reference, clock, and power details before replacing the target. Choose ADS823 or ADS826 when 60 MSPS provides meaningful acquisition headroom, or ADS828 when 75 MSPS is required, because each faster option changes output timing, clocking, power, and thermal design. No verified cross-brand drop-in replacement is established, so a competitor conversion requires an independent pinout and parametric qualification.

대체품과의 비교

파라미터 이 제품 ADS825E ADS823 ADS826 ADS828
Package SSOP-28 (DB) SSOP-28 (DB) SSOP-28 (DB) SSOP-28 (DB) SSOP-28 (DB)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 10 bit 10 bit 10 bit 10 bit 10 bit
Maximum Sampling Rate 40 MSPS 40 MSPS 60 MSPS 60 MSPS 75 MSPS

주요 차별점

  • Matches the 40 MSPS baseline of the ADS825 family (vs ADS825E)
  • Lower conversion rate than the 60 MSPS upgrade options (vs ADS823)
  • Lower conversion rate than the 60 MSPS ADS826 (vs ADS826)

설계 노트

Route the 10-bit parallel output as a short, continuous bus to the FPGA or acquisition logic. Match output-to-input delay across the data bits and clock, keep the clock away from sensitive analog and reference nodes, and use a solid ground plane for return-current control. The manufacturer’s application circuit should be used as the basis for decoupling placement and signal ordering.

Do not select an ADC solely by its 40 MSPS conversion rate. The analog front end, anti-alias filter, reference network, clock source, and receiver must all support the intended measurement bandwidth. The ADS822E/1K has a 300 MHz analog input bandwidth, so an unsuitable external filter can alias out-of-band energy into the sampled data even though the converter itself is operating correctly.

Place the input, reference, and bypass capacitors close to their associated pins, and provide a low-impedance return to the device ground. Validate the reference network for startup, noise, and temperature behavior across the operating range. When upgrading from 40 MSPS to the 60 MSPS or 75 MSPS family members, recalculate clock, output-timing, power, and thermal margins because the additional throughput changes system requirements.

Treat the parallel output as a synchronous high-speed bus even though the conversion rate is 40 MSPS. Use a controlled clock source, avoid stubs, provide adequate series damping where needed, and establish receiver timing margins before fabrication. Differential and single-ended input modes should be evaluated with the same amplifier bandwidth and common-mode assumptions rather than treating them as automatic substitutes.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page confirms an operating range of -40 °C to +85 °C and catalog ordering information. RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations are not stated in the referenced product information.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADS822E/1K datasheet ADS822E/1K specifications ADS822E/1K pinout ADS822E/1K SSOP-28 ADS822E/1K application circuit ADS822E/1K equivalent ADS822E/1K replacement ADS822E/1K vs ADS825E ADS822E/1K vs ADS823 Texas Instruments ADS822E/1K ADS822E/1K price ADS822E/1K stock 10-bit 40-MSPS ADC 300 MHz SSOP-28 ADC ADS822E/1K waveform capture

관련 부품 & 용어

Texas Instruments ADS822E/1K ADS825E ADS823 ADS826 ADS828 analog-to-digital converter ADC pipelined ADC data-acquisition IC signal-processing IC 10-bit resolution 40 MSPS 60 MSPS 75 MSPS 300 MHz analog input bandwidth single-ended input differential input parallel CMOS interface internal reference external reference SSOP-28 SSOP package family surface-mount package semiconductor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기