ADS822E/1K - 10-Bit 40-MSPS ADC | Industrial Sensing
MPN: ADS822E/1K ✓ Hoạt độngADS822E/1K Tóm tắt
An ADC is a data-acquisition IC that converts continuous analog voltage into a digital code. The ADS822 family belongs to the pipelined ADC hierarchy, where a multistage conversion architecture supports high sampling rates while providing a parallel interface for direct connection to digital logic, processors, or FPGA input blocks. The ADS822E/1K is one channel, so it samples one analog input at each conversion rather than multiplexing multiple channels internally.
Three defining specifications are its 10-bit resolution, 40 MSPS maximum sampling rate, and 300 MHz analog input bandwidth. The 10-bit result represents each conversion with 1024 codes, while the 40 MSPS rate supports acquisition of high-bandwidth waveforms. The 300 MHz input bandwidth reduces the need for heavy external low-pass filtering, although the selected filter must still control aliasing and out-of-band energy.
The ADS822E/1K uses a parallel CMOS interface and supports internal or external reference options. These features provide flexibility when the converter is paired with an FPGA, a digital signal processor, or a precision data-acquisition controller. Because the parallel interface transfers multiple bits simultaneously, board routing must account for timing skew and simultaneous switching noise across the digital output bus.
Typical applications include vibration monitoring, industrial waveform capture, communications signal analysis, ultrasound receive channels, and laboratory instrumentation. The device is especially relevant when a 40 MSPS conversion rate is sufficient but 75 MSPS performance is unnecessary. In such systems, the ADC can capture repetitive or single-shot analog waveforms before conversion and digital processing.
The primary design trade-off is interface timing rather than package capacity. Use controlled-impedance routing, short parallel traces, and a solid ground reference to preserve data integrity at the maximum conversion rate. External decoupling, a stable reference arrangement, and input filtering should follow the manufacturer’s recommended application circuit.
This page combines the manufacturer’s device specifications with same-family, pin-compatible upgrade options and practical implementation guidance. It helps engineers distinguish functional upgrades from drop-in choices, assess interface requirements, and select the appropriate ADC speed and package for a new design.
Bộ thay thế dễ dàng lắp đặt cho ADS822E/1K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS822E/1K (cùng hình factor và footprint) — khác nhau ở Package, Architecture, Operating Temperature, Input Type, Resolution.
ADS825E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS823E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS826E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS8284IRGCR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS822E/1K Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 10 bit |
| Maximum Sampling Rate | 40 MSPS |
| Number of Input Channels | 1 channel |
| Conversion Architecture | 1 pipelined stage |
| Input Configuration | Single-ended or differential |
| Analog Input Range | 1.5 V to 3.5 V |
| Analog Input Bandwidth | 300 MHz |
| Digital Interface | Parallel CMOS |
| Reference Configuration | Internal or external reference |
| Power Saving Feature | Low power |
| Hộp | SSOP-28 (DB), 28 pins |
| Kiểu lắp đặt | Surface mount |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Device Classification | Data-acquisition and signal-processing IC |
| Catalog Status | Catalog |
Hướng dẫn cấu hình chân ADS822E/1K ssop-28 (db), 28 pins
Cấu hình chân cho ADS822E/1K (ssop-28 (db), 28 pins gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS822E/1K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS822E/1K phù hợp cho 6 Áp dụngs: Industrial Vibration Monitoring, Communications Signal Analysis, Medical Ultrasound Receive Channels, Test and Measurement Instrumentation, Ultrasound and Acoustic Signal Capture, Portable Data Acquisition.
Industrial Vibration Monitoring
The ADS822E/1K suits vibration and condition-monitoring systems that require repeatable sampling of transient mechanical signals. Its 10-bit resolution and 40 MSPS maximum conversion rate capture substantially more points across a waveform than a low-rate instrumentation ADC, while the 300 MHz analog input bandwidth provides headroom for the sensor amplifier and anti-alias filter. The parallel CMOS output can feed an FPGA for real-time spectral processing. Designers should place the analog driver close to the converter, control return paths, and validate filter phase response against the intended analysis bandwidth.
Được đề xuất
Communications Signal Analysis
The ADS822E/1K can serve as the front-end converter in communications test equipment that must capture amplitude and phase information from an IF or baseband waveform. Its 40 MSPS sampling capability and 300 MHz input bandwidth provide a useful balance between conversion performance and implementation complexity, while the 10-bit parallel output is suitable for FPGA-based demodulation or filtering. The analog input range of 1.5 V to 3.5 V must be respected through appropriate gain and offset design. A steep low-pass filter should be selected when out-of-band content could alias into the measurement band.
Được đề xuất
Medical Ultrasound Receive Channels
The ADS822E/1K is applicable to multi-channel medical ultrasound systems when each receive path can use a dedicated 10-bit converter. At 40 MSPS, the device supports acquisition of echo waveforms while the 300 MHz analog input bandwidth accommodates the bandwidth of a carefully designed ultrasound preamplifier and anti-alias network. Parallel CMOS outputs can connect to a channel-oriented FPGA interface. Because every added converter contributes power and board area, system designers should evaluate channel synchronization, thermal performance, grounding, and regulatory requirements before finalizing the architecture.
Được đề xuất
Test and Measurement Instrumentation
The ADS822E/1K fits laboratory and portable instrumentation that requires fast conversion without the data rate of a high-end waveform instrument. A 10-bit code width can represent an acquired waveform using 1024 levels, and the 40 MSPS rate supports short sampling windows for transient and repetitive measurements. The parallel interface allows an FPGA to perform triggering, filtering, decimation, and peak detection. For instruments requiring greater vertical accuracy, noise averaging or a higher-resolution converter may be more appropriate, so engineers should evaluate the required effective number of bits rather than resolution alone.
Được đề xuất
Ultrasound and Acoustic Signal Capture
The ADS822E/1K can capture acoustic or ultrasonic waveforms in equipment where a dedicated converter is used per sensing channel. Its 300 MHz analog input bandwidth is considerably higher than the 40 MSPS Nyquist rate, allowing the frontend to preserve useful signal content while an external filter controls aliasing. The single-ended or differential input capability supports different transducer amplifier architectures, and the parallel digital interface provides straightforward connection to FPGA acquisition logic. Layout should prioritize low-noise reference distribution, short analog routes, and matched digital timing across channels.
Được đề xuất
Portable Data Acquisition
The ADS822E/1K is suitable for compact, battery-powered acquisition modules where a parallel ADC must operate near the input connector rather than deep inside a chassis. Its 28-pin SSOP package provides a practical routing option, and the 40 MSPS rate is suitable for capturing compact bursts of sensor data. The 10-bit interface can be captured directly by an FPGA or transferred into a buffer before wireless transmission. Power, reference startup, clock jitter, and thermal rise should be evaluated in the final enclosure because battery-operated designs often operate away from ideal laboratory cooling and supply conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS822E/1K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS825E | ADS823 | ADS826 | ADS828 |
|---|---|---|---|---|---|
| Package | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Maximum Sampling Rate | 40 MSPS | 40 MSPS | 60 MSPS | 60 MSPS | 75 MSPS |
Bảo phân biệt quan trọng
- Matches the 40 MSPS baseline of the ADS825 family (vsADS825E)
- Lower conversion rate than the 60 MSPS upgrade options (vsADS823)
- Lower conversion rate than the 60 MSPS ADS826 (vsADS826)
Ghi chú thiết kế
Route the 10-bit parallel output as a short, continuous bus to the FPGA or acquisition logic. Match output-to-input delay across the data bits and clock, keep the clock away from sensitive analog and reference nodes, and use a solid ground plane for return-current control. The manufacturer’s application circuit should be used as the basis for decoupling placement and signal ordering.
Do not select an ADC solely by its 40 MSPS conversion rate. The analog front end, anti-alias filter, reference network, clock source, and receiver must all support the intended measurement bandwidth. The ADS822E/1K has a 300 MHz analog input bandwidth, so an unsuitable external filter can alias out-of-band energy into the sampled data even though the converter itself is operating correctly.
Place the input, reference, and bypass capacitors close to their associated pins, and provide a low-impedance return to the device ground. Validate the reference network for startup, noise, and temperature behavior across the operating range. When upgrading from 40 MSPS to the 60 MSPS or 75 MSPS family members, recalculate clock, output-timing, power, and thermal margins because the additional throughput changes system requirements.
Treat the parallel output as a synchronous high-speed bus even though the conversion rate is 40 MSPS. Use a controlled clock source, avoid stubs, provide adequate series damping where needed, and establish receiver timing margins before fabrication. Differential and single-ended input modes should be evaluated with the same amplifier bandwidth and common-mode assumptions rather than treating them as automatic substitutes.
Thông tin tuân thủ
The manufacturer product page confirms an operating range of -40 °C to +85 °C and catalog ordering information. RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations are not stated in the referenced product information.