AK4382AVT - 24-Bit Stereo I2S Audio DAC | AKM
MPN: AK4382AVT ✗ 停產AK4382AVT 概覽
A delta-sigma DAC is a data converter that uses oversampling and digital noise shaping to convert digital audio samples into an analog output. It belongs to the broader DAC, data-converter, signal-conversion, and semiconductor hierarchies. In an audio signal chain, the AK4382AVT typically accepts digital samples from a USB interface, audio processor, or digital transport and produces differential analog outputs for a headphone or line-output amplifier stage.
The AK4382AVT provides 24-bit resolution, two audio channels, and an I2S interface. The manufacturer datasheet identifies a 112 dB dynamic-range figure and supports operation up to 192 kHz, while one distributor listing also identifies a 216 kHz sampling-rate category. Its advanced multi-bit delta-sigma architecture is intended to balance dynamic range, linearity, and implementation cost in digital audio equipment.
The device operates from a 5 V supply and is specified for an ambient operating range of -40 °C to +85 °C. The AK4382AVT is packaged in a 16-pin TSSOP for surface-mount assembly. Its reel designation identifies the supplied component as a production packing option, allowing use in automated PCB assembly and volume manufacturing.
Typical applications include high-resolution audio DAC boards, USB and network audio players, digital mixing consoles, audio receivers, professional audio interfaces, and premium consumer playback equipment. It is also suitable for evaluation platforms where a stereo I2S-to-analog conversion stage is required before adding a high-current output amplifier.
The primary layout consideration is digital-clock and analog-output isolation. Route the I2S data, bit clock, and master clock away from the analog output network, use a continuous ground reference, and follow the manufacturer pin-description and typical-application circuits when assigning decoupling and output-filter components. Correct supply bypassing and controlled clocking are essential for preserving the specified signal-to-noise performance.
This page organizes the technical specifications, sourcing guidance, compatible ordering codes, comparison information, and practical design considerations into a consolidated engineering reference for evaluating the AK4382AVT in precision stereo audio designs.
直接替換替代品,適用於 AK4382AVT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
AK4382AVT-E2
✅ 直接替換📋 參考替代品(不在目錄中)
AK4382AVTP-E2
✅ 直接替換📋 參考替代品(不在目錄中)
AK4382AVT 最大額定值與電氣特性
| Device Type | Stereo audio digital-to-analog converter |
| Converter Architecture | Advanced multi-bit delta-sigma |
| Number of Channels | 2 channels |
| 解析度 | 24 bits |
| Dynamic Range | 112 dB |
| Maximum Sampling Rate | 192 kHz |
| Distributor Sampling-Rate Category | 216 kHz |
| Digital Audio Interface | I2S |
| 供應電壓 | 5 V |
| Supply Type | Single supply |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 16-pin TSSOP |
| 安裝方式 | Surface-mount |
| Shipping Package | Reel |
| 輸出配置 | Differential output |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| 腳位數 | 16 pins |
AK4382AVT reel 腳位配置指南
AK4382AVT(reel 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AK4382AVT.
請參閱 資料表 以查看完整腳位配置。
典型應用
AK4382AVT 適用於 6 應用s: High-Resolution USB Audio Player, Network Audio Streaming Receiver, Professional Audio Monitor Controller, Digital Mixing Console Output Stage, Premium CD and Network Player, Digital Audio Evaluation Board.
High-Resolution USB Audio Player
The AK4382AVT fits a USB-audio player that converts an I2S digital stream into analog stereo audio. Its 24-bit resolution and manufacturer-specified 112 dB dynamic range provide a clear performance baseline for lossless playback, while its advanced multi-bit delta-sigma architecture supports low-distortion conversion. The I2S input can connect to a USB audio controller, and the differential outputs can feed a line-output or headphone-driver stage. Correct master-clock generation, low-jitter routing, short supply connections, and separate analog return paths remain important for preserving the converter's full dynamic range.
推薦
Network Audio Streaming Receiver
The AK4382AVT is suitable for a network streaming receiver that receives decoded PCM data and produces analog audio. A 192 kHz maximum sampling rate supports high-resolution source material, while the two-channel topology matches conventional stereo playback. The digital processor can supply I2S data and clocks, and the AK4382AVT can convert them into differential analog signals for a line stage or headphone amplifier. Keep clock routing compact, isolate digital return currents from the analog output region, and use the manufacturer's recommended filtering network to maintain acceptable channel separation and distortion.
推薦
Professional Audio Monitor Controller
The AK4382AVT can serve as the stereo conversion stage in a professional monitor controller receiving digital audio from a mixer or interface. Its 24-bit resolution, 112 dB dynamic range, and operation up to 192 kHz suit monitoring paths that require accurate signal capture over a broad frequency and level range. Differential analog outputs reduce susceptibility to common-mode noise when connected to a balanced line stage. The design should maintain continuous grounding, minimize analog trace length, and separate converter output routing from switching supplies and high-speed digital clocks.
推薦
Digital Mixing Console Output Stage
The AK4382AVT is appropriate for a digital mixing console or stereo master-output card where a compact two-channel DAC is needed. It converts the final I2S mix into differential analog signals for balanced line-level circuitry. The 24-bit data path and 112 dB dynamic range support a quality conversion stage, while the 16-pin TSSOP package simplifies dense surface-mount layouts. Clocking must remain synchronized with the console's audio engine, and the output network should use the manufacturer-recommended filter and grounding arrangement to preserve linearity.
推薦
Premium CD and Network Player
The AK4382AVT can be used in a premium CD or network player where a dedicated stereo conversion stage improves system organization. It accepts digital audio over I2S and provides differential analog outputs for a downstream line amplifier. Its 24-bit resolution, 112 dB dynamic range, and support for sampling rates up to 192 kHz make it suitable for modern high-resolution playback as well as conventional 44.1 kHz and 48 kHz sources. The analog section should use short, symmetrical routing and supply filtering that meet the manufacturer application guidance.
推薦
Digital Audio Evaluation Board
The AK4382AVT is well suited to a digital-audio evaluation board because it provides a complete stereo I2S-to-analog conversion function in a 16-pin TSSOP. Designers can evaluate the manufacturer's advanced multi-bit delta-sigma architecture, 24-bit resolution, and 112 dB dynamic range before adding output amplifiers and filters. The board should expose test points for data, bit clock, master clock, supply, ground, and both differential outputs. Use controlled clock sources and follow the typical application circuit so evaluation results reflect the intended converter configuration.
推薦
推薦產品摘要
工程參考資料,適用於 AK4382AVT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AK4382AVT-E2 | AK4382AVTP-E2 |
|---|---|---|---|
| Device Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Resolution | 24 bits | 24 bits | 24 bits |
| Number of Channels | 2 channels | 2 channels | 2 channels |
| Dynamic Range | 112 dB | 112 dB | 112 dB |
| Digital Audio Interface | I2S | I2S | I2S |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Supply Voltage | 5 V | 5 V | 5 V |
| Converter Architecture | Advanced multi-bit delta-sigma | Advanced multi-bit delta-sigma | Advanced multi-bit delta-sigma |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Output Configuration | Differential output | Differential output | Differential output |
主要差異化特點
- Direct ordering-code replacement (對比AK4382AVT-E2)
- Identical electrical design with supplier-code suffix (對比AK4382AVTP-E2)
- Purpose-built stereo high-resolution conversion (對比ES906K)
- Compact surface-mount format (對比MAX9887)
- Manufacturer-defined 112 dB dynamic range (對比CS4398)
設計說明
Separate the digital and analog signal regions around the AK4382AVT. Route I2S data, bit clock, and master clock away from the differential output traces, and connect the output return directly to the device ground reference using a continuous plane. Place the manufacturer-recommended output-filter components close to their associated pins. This arrangement limits digital crosstalk into the analog outputs and helps preserve the specified 112 dB dynamic range.
Use the manufacturer-recommended bypass network and place each local decoupling capacitor close to the corresponding AK4382AVT supply pin. The converter operates from a 5 V single supply, but supply noise and impedance can still modulate the analog output. Keep high-current switching circuitry away from the DAC and provide a low-impedance return path. Verify startup behavior at the system level because the external clock and supply sequence must not create an invalid operating state.
Do not substitute a generic stereo DAC solely because it also has an I2S input and two output channels. Pin assignments, clock modes, differential-output voltage, supply voltage, filter requirements, and output impedance must be checked before replacement. For direct substitution, use AK4382AVT-E2 or AK4382AVTP-E2, whose ordering codes are documented as electrically identical to AK4382AVT. For other devices, perform a complete timing and analog-circuit review.
Treat the I2S clock signals as high-speed digital nets even at moderate audio sample rates. Match clock routing to the source driver's capability, minimize stubs, and keep the master clock away from analog output components. A clean clock relationship is necessary for valid stereo framing and stable conversion. If the source device cannot provide the required clock mode, use a local clock generator or a properly designed interface rather than altering clock timing at the DAC pins.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. AEC-Q100 is treated as not applicable because the AK4382AVT is an audio converter rather than an automotive-qualified component.