AVISO DE ÚLTIMA COMPRA: AK4382AVT está se aproximando do fim de vida. Data limite para pedidos: Fale conosco. Ver peças alternativas disponíveis →
AKM (Asahi Kasei Microdevices)

AK4382AVT - 24-Bit Stereo I2S Audio DAC | AKM

N.º da peça: AK4382AVT ✗ Fim de vida
5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

AK4382AVT Visão geral

The Asahi Kasei Microdevices AK4382AVT is a 24-bit stereo delta-sigma digital-to-analog converter with an I2S digital audio interface, 112 dB dynamic range, and a 16-pin TSSOP package. It is designed for digital audio equipment that requires a two-channel converter with performance suitable for high-resolution audio systems.

A delta-sigma DAC is a data converter that uses oversampling and digital noise shaping to convert digital audio samples into an analog output. It belongs to the broader DAC, data-converter, signal-conversion, and semiconductor hierarchies. In an audio signal chain, the AK4382AVT typically accepts digital samples from a USB interface, audio processor, or digital transport and produces differential analog outputs for a headphone or line-output amplifier stage.

The AK4382AVT provides 24-bit resolution, two audio channels, and an I2S interface. The manufacturer datasheet identifies a 112 dB dynamic-range figure and supports operation up to 192 kHz, while one distributor listing also identifies a 216 kHz sampling-rate category. Its advanced multi-bit delta-sigma architecture is intended to balance dynamic range, linearity, and implementation cost in digital audio equipment.

The device operates from a 5 V supply and is specified for an ambient operating range of -40 °C to +85 °C. The AK4382AVT is packaged in a 16-pin TSSOP for surface-mount assembly. Its reel designation identifies the supplied component as a production packing option, allowing use in automated PCB assembly and volume manufacturing.

Typical applications include high-resolution audio DAC boards, USB and network audio players, digital mixing consoles, audio receivers, professional audio interfaces, and premium consumer playback equipment. It is also suitable for evaluation platforms where a stereo I2S-to-analog conversion stage is required before adding a high-current output amplifier.

The primary layout consideration is digital-clock and analog-output isolation. Route the I2S data, bit clock, and master clock away from the analog output network, use a continuous ground reference, and follow the manufacturer pin-description and typical-application circuits when assigning decoupling and output-filter components. Correct supply bypassing and controlled clocking are essential for preserving the specified signal-to-noise performance.

This page organizes the technical specifications, sourcing guidance, compatible ordering codes, comparison information, and practical design considerations into a consolidated engineering reference for evaluating the AK4382AVT in precision stereo audio designs.

Alternativas drop-in para AK4382AVT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

AK4382AVT-E2

✅ Drop-In
📦 16-TSSOP
Identical electrical and performance specifications; only the ordering suffix differs, so the 24-bit resolution and 112 dB dynamic range remain unchanged

📋 Alternativa de referência (fora do catálogo)

AK4382AVTP-E2

✅ Drop-In
📦 16-TSSOP
Identical electrical and performance specifications; P-E2 is a supplier ordering code with no change to resolution, dynamic range, package, or performance

📋 Alternativa de referência (fora do catálogo)

AK4382AVT Classificações máximas e características elétricas

Device Type Stereo audio digital-to-analog converter
Converter Architecture Advanced multi-bit delta-sigma
Number of Channels 2 channels
Resolução 24 bits
Dynamic Range 112 dB
Maximum Sampling Rate 192 kHz
Distributor Sampling-Rate Category 216 kHz
Digital Audio Interface I2S
Tensão de alimentação 5 V
Supply Type Single supply
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 16-pin TSSOP
Estilo de montagem Surface-mount
Shipping Package Reel
Configuração de saída Differential output
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown
Contagem de pinos 16 pins

Guia de Configuração de Pinos do AK4382AVT reel

Configuração de pinos para AK4382AVT (pacote reel). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote reel para AK4382AVT

Nenhum dado detalhado de pinagem disponível para AK4382AVT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AK4382AVT é adequado para 6 aplicaçãos: High-Resolution USB Audio Player, Network Audio Streaming Receiver, Professional Audio Monitor Controller, Digital Mixing Console Output Stage, Premium CD and Network Player, Digital Audio Evaluation Board.

🎧

High-Resolution USB Audio Player

The AK4382AVT fits a USB-audio player that converts an I2S digital stream into analog stereo audio. Its 24-bit resolution and manufacturer-specified 112 dB dynamic range provide a clear performance baseline for lossless playback, while its advanced multi-bit delta-sigma architecture supports low-distortion conversion. The I2S input can connect to a USB audio controller, and the differential outputs can feed a line-output or headphone-driver stage. Correct master-clock generation, low-jitter routing, short supply connections, and separate analog return paths remain important for preserving the converter's full dynamic range.

🌐

Network Audio Streaming Receiver

The AK4382AVT is suitable for a network streaming receiver that receives decoded PCM data and produces analog audio. A 192 kHz maximum sampling rate supports high-resolution source material, while the two-channel topology matches conventional stereo playback. The digital processor can supply I2S data and clocks, and the AK4382AVT can convert them into differential analog signals for a line stage or headphone amplifier. Keep clock routing compact, isolate digital return currents from the analog output region, and use the manufacturer's recommended filtering network to maintain acceptable channel separation and distortion.

🏭

Professional Audio Monitor Controller

The AK4382AVT can serve as the stereo conversion stage in a professional monitor controller receiving digital audio from a mixer or interface. Its 24-bit resolution, 112 dB dynamic range, and operation up to 192 kHz suit monitoring paths that require accurate signal capture over a broad frequency and level range. Differential analog outputs reduce susceptibility to common-mode noise when connected to a balanced line stage. The design should maintain continuous grounding, minimize analog trace length, and separate converter output routing from switching supplies and high-speed digital clocks.

🎚️

Digital Mixing Console Output Stage

The AK4382AVT is appropriate for a digital mixing console or stereo master-output card where a compact two-channel DAC is needed. It converts the final I2S mix into differential analog signals for balanced line-level circuitry. The 24-bit data path and 112 dB dynamic range support a quality conversion stage, while the 16-pin TSSOP package simplifies dense surface-mount layouts. Clocking must remain synchronized with the console's audio engine, and the output network should use the manufacturer-recommended filter and grounding arrangement to preserve linearity.

📺

Premium CD and Network Player

The AK4382AVT can be used in a premium CD or network player where a dedicated stereo conversion stage improves system organization. It accepts digital audio over I2S and provides differential analog outputs for a downstream line amplifier. Its 24-bit resolution, 112 dB dynamic range, and support for sampling rates up to 192 kHz make it suitable for modern high-resolution playback as well as conventional 44.1 kHz and 48 kHz sources. The analog section should use short, symmetrical routing and supply filtering that meet the manufacturer application guidance.

🔧

Digital Audio Evaluation Board

The AK4382AVT is well suited to a digital-audio evaluation board because it provides a complete stereo I2S-to-analog conversion function in a 16-pin TSSOP. Designers can evaluate the manufacturer's advanced multi-bit delta-sigma architecture, 24-bit resolution, and 112 dB dynamic range before adding output amplifiers and filters. The board should expose test points for data, bit clock, master clock, supply, ground, and both differential outputs. Use controlled clock sources and follow the typical application circuit so evaluation results reflect the intended converter configuration.

What is the AK4382AVT?
The AK4382AVT is a 24-bit, two-channel delta-sigma digital-to-analog converter made by Asahi Kasei Microdevices for high-resolution stereo audio equipment. It accepts digital audio through an I2S interface and uses an advanced multi-bit modulation architecture to achieve a manufacturer-specified dynamic range of 112 dB. According to the manufacturer datasheet, the device is intended to balance wide dynamic range, improved linearity, and cost for digital audio systems.
What are the key specifications of AK4382AVT that engineers should know?
The AK4382AVT combines 24-bit resolution, two output channels, an I2S interface, 112 dB dynamic range, and operation up to 192 kHz in a 16-pin TSSOP package. It also operates from a 5 V single supply over -40 °C to +85 °C. According to the manufacturer datasheet, its advanced multi-bit delta-sigma architecture supports wide dynamic range while preserving linearity and improving total harmonic distortion plus noise performance.
Where can I download the AK4382AVT datasheet PDF?
The AK4382AVT datasheet can be opened through the product-datasheet URL on this page, which links to the AK4382AVT technical document. The document contains the general description, architecture, electrical characteristics, pin descriptions, and application information needed for circuit design. Use the manufacturer pin-description table when assigning PCB nets and the typical application circuit when selecting external filtering and decoupling components.
Where can I find the AK4382AVT pinout?
The AK4382AVT pinout is defined in the manufacturer datasheet, which covers the complete 16-pin TSSOP device. The public product descriptions identify the package and interface but do not expose a dependable numbered pin table on their result pages. Use the datasheet pin-description section when connecting the analog outputs, I2S data, bit clock, master clock, supply, and ground pins; do not infer pin functions from package position alone.
Is AK4382AVT suitable for USB and network audio products?
Yes, the AK4382AVT is suitable for USB and network audio products when the digital source can provide a compatible I2S stream. Its 24-bit resolution, two-channel architecture, and 192 kHz maximum sampling rate suit high-resolution consumer and networked playback systems. The source processor must still provide correctly formatted I2S data, suitable clocks, and a stable reference, while the analog output stage must match the converter's differential output arrangement.
What is the difference between AK4382AVT and AK4382A?
The AK4382AVT is the orderable 16-pin TSSOP designation for the AK4382A converter family, with the T suffix and reel packing reflected in the product naming. The manufacturer describes the AK4382A as a 24-bit, two-channel DAC using an advanced multi-bit delta-sigma architecture. Circuit design should therefore follow the AK4382A electrical and pin guidance while purchasing the exact AK4382AVT ordering code.
What can replace AK4382AVT?
The closest documented replacements are the Asahi Kasei Microdevices ordering codes AK4382AVT-E2 and AK4382AVTP-E2. Manufacturer-related comparison information states that AK4382AVT-E2 and AK4382AVTP-E2 are functionally identical and that the additional P-E2 code is a supplier code without electrical or performance differences. Other stereo DACs may offer similar functions but should not be treated as drop-in replacements without package, pin, clock, and analog-output verification.
Is AK4382AVT the same as AK4382AVT-E2?
The AK4382AVT-E2 is a directly interchangeable ordering designation for the AK4382AVT and retains the same 16-pin TSSOP implementation. Manufacturer-related comparison information identifies AK4382AVT-E2 as an AK4382AVT ordering form, while explaining that AK4382AVTP-E2 uses an internal supplier code without changing specifications or performance. Check the suffix and packing requirements against the manufacturer ordering guide before placing the order.
When should I choose AK4382AVT instead of a generic stereo DAC?
Choose the AK4382AVT when a design needs a specified 24-bit, two-channel, 112 dB dynamic-range converter in a 16-pin TSSOP package. It is particularly appropriate for cost-sensitive high-resolution audio equipment where an I2S input and differential analog output are desired. Consider another converter when its interface, supply voltage, output architecture, package, or sampled-output performance offers a better match to the system constraints.
Is AK4382AVT suitable for professional audio interfaces?
The AK4382AVT can be used in professional and semi-professional stereo interface designs that operate within its electrical limits. Its 24-bit resolution, 112 dB dynamic range, and support for sampling rates up to 192 kHz align with high-resolution monitor-controller and digital mixer requirements. The converter does not itself provide microphone preamplification, headphone amplification, clock recovery, or a complete audio codec, so those functions must be implemented separately.
How should the AK4382AVT be decoupled and laid out?
Place the required supply-decoupling capacitors close to the AK4382AVT supply and ground pins, and keep analog output routing away from the I2S data, bit-clock, and master-clock traces. The manufacturer datasheet's typical application circuit should govern the external component values and grounding arrangement. A continuous ground plane, short return paths, and controlled clock routing help preserve dynamic-range and distortion performance in analog output circuitry.
What clocking does the AK4382AVT require?
The AK4382AVT requires an I2S-compatible digital audio stream with correctly derived data, bit-clock, and master-clock signals. The exact supported master-clock frequencies, bit-clock ratios, and operating modes must be confirmed in the manufacturer clocking tables before schematic capture. The digital source and destination must agree on data alignment and clock polarity, since incorrect configuration can cause channel swapping, clipping, or invalid sample timing.
Does the AK4382AVT include headphone or line amplifiers?
No, the AK4382AVT is a standalone stereo DAC and does not include a headphone amplifier or a fixed line-output amplifier stage. Its differential analog outputs must drive an appropriate external amplification or filtering circuit. This separation allows the converter to be paired with headphone amplifiers, line drivers, active filters, or mixer stages selected for the required output impedance, bandwidth, noise, and current capability.
Where can I buy AK4382AVT and check current availability?
Use the Request a Quote form on this page to ask about AK4382AVT availability, current lead time, minimum order quantity, and the required reel quantity. The form is the appropriate route for a legacy converter because stock and lifecycle conditions can change independently of the published technical data. Include the exact AK4382AVT ordering code and your required quantity to obtain an actionable sourcing response.
What is the lead time and price of AK4382AVT?
The current AK4382AVT price and lead time must be obtained through the Request a Quote form on this page. The device is a legacy catalog part, so orderable quantity and delivery timing can vary with remaining inventory and manufacturer supply conditions. Submit the exact MPN, annual usage, reel quantity, and target delivery date so the sourcing response reflects the intended production requirement.
Is AK4382AVT currently in stock?
Current AK4382AVT stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search result. A landing page showing the component does not guarantee that a specific reel quantity is immediately available. Provide the required quantity and packaging preference with the request so inventory can be matched to the production schedule.

Dados de referência de engenharia para AK4382AVT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AK4382AVT for a legacy or new stereo audio design that specifically calls for a 24-bit, two-channel I2S DAC in a 16-pin TSSOP with a manufacturer-specified 112 dB dynamic range and operation up to 192 kHz. Use AK4382AVT-E2 when that is the approved ordering form for the same device; AK4382AVTP-E2 is also electrically identical, with P-E2 serving as a supplier code. For a different converter such as the ES906K, MAX9887, or CS4398, treat it as a new design rather than a drop-in replacement because package, pin assignments, clocking, and analog-output requirements must be redesigned. Also select another device if the AK4382AVT supply, sampling-rate, or lifecycle requirements do not match the production program.

Comparação com alternativas

Parâmetro Este produto AK4382AVT-E2 AK4382AVTP-E2
Device Type Stereo audio DAC Stereo audio DAC Stereo audio DAC
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices
Package 16-TSSOP 16-TSSOP 16-TSSOP
Resolution 24 bits 24 bits 24 bits
Number of Channels 2 channels 2 channels 2 channels
Dynamic Range 112 dB 112 dB 112 dB
Digital Audio Interface I2S I2S I2S
Maximum Sampling Rate 192 kHz 192 kHz 192 kHz
Supply Voltage 5 V 5 V 5 V
Converter Architecture Advanced multi-bit delta-sigma Advanced multi-bit delta-sigma Advanced multi-bit delta-sigma
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Output Configuration Differential output Differential output Differential output

Principais diferenciais

  • Direct ordering-code replacement (vs AK4382AVT-E2)
  • Identical electrical design with supplier-code suffix (vs AK4382AVTP-E2)
  • Purpose-built stereo high-resolution conversion (vs ES906K)
  • Compact surface-mount format (vs MAX9887)
  • Manufacturer-defined 112 dB dynamic range (vs CS4398)

Notas de projeto

Separate the digital and analog signal regions around the AK4382AVT. Route I2S data, bit clock, and master clock away from the differential output traces, and connect the output return directly to the device ground reference using a continuous plane. Place the manufacturer-recommended output-filter components close to their associated pins. This arrangement limits digital crosstalk into the analog outputs and helps preserve the specified 112 dB dynamic range.

Use the manufacturer-recommended bypass network and place each local decoupling capacitor close to the corresponding AK4382AVT supply pin. The converter operates from a 5 V single supply, but supply noise and impedance can still modulate the analog output. Keep high-current switching circuitry away from the DAC and provide a low-impedance return path. Verify startup behavior at the system level because the external clock and supply sequence must not create an invalid operating state.

Do not substitute a generic stereo DAC solely because it also has an I2S input and two output channels. Pin assignments, clock modes, differential-output voltage, supply voltage, filter requirements, and output impedance must be checked before replacement. For direct substitution, use AK4382AVT-E2 or AK4382AVTP-E2, whose ordering codes are documented as electrically identical to AK4382AVT. For other devices, perform a complete timing and analog-circuit review.

Treat the I2S clock signals as high-speed digital nets even at moderate audio sample rates. Match clock routing to the source driver's capability, minimize stubs, and keep the master clock away from analog output components. A clean clock relationship is necessary for valid stereo framing and stable conversion. If the source device cannot provide the required clock mode, use a local clock generator or a properly designed interface rather than altering clock timing at the DAC pins.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. AEC-Q100 is treated as not applicable because the AK4382AVT is an audio converter rather than an automotive-qualified component.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AK4382AVT datasheet AK4382AVT datasheet pdf AK4382AVT pinout AK4382AVT specifications AK4382AVT 16-TSSOP AK4382AVT 24-bit DAC AK4382AVT I2S audio AK4382AVT equivalent AK4382AVT replacement AK4382AVT price AK4382AVT stock AK4382AVT vs ES906K

Componentes & termos relacionados

Asahi Kasei Microdevices AK4382AVT AK4382AVT-E2 AK4382AVTP-E2 AK4382A ES906K MAX9887 CS4398 CS4461-CZZ WM8985CGEFL/R delta-sigma DAC digital-to-analog converter audio data converter I2S advanced multi-bit modulation 24-bit resolution 112 dB dynamic range 192 kHz sampling rate 216 kHz sampling rate differential output 16-TSSOP TSSOP package family surface-mount package USB audio network audio RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ