AKM (Asahi Kasei Microdevices)

AK5385AVS - 24-Bit Stereo Audio ADC | Asahi Kasei

MPN: AK5385AVS ✓ 啟用中
28-pin SOP Package 216 kHz Speed
MOQ: 1 |

AK5385AVS 概覽

The Asahi Kasei Microdevices AK5385AVS is a 24-bit, two-channel delta-sigma audio ADC supporting sampling frequencies from 8 kHz to 216 kHz and packaged in a 28-pin SOP. It uses enhanced Dual Bit delta-sigma architecture to provide high accuracy and low cost for professional audio equipment. The converter achieves 114 dB dynamic range and uses fully differential analog inputs, making it suitable for high-end audio systems, AV amplifiers, recorders, and musical instruments.

An audio ADC converts left and right analog audio signals into digital data for processing, storage, transmission, or playback. The AK5385AVS belongs to the delta-sigma ADC family, a semiconductor category that uses noise shaping and digital filtering to provide high-resolution conversion. Within the broader signal-chain hierarchy, it sits between analog microphones, line-level inputs, or instrument preamplifiers and the digital audio processing stage of an AV receiver, mixer, recorder, or musical instrument.

The AK5385AVS provides 24-bit resolution, operation from 8 kHz through 216 kHz, and two simultaneous audio channels. Its fully differential input architecture supports noise reduction by rejecting common-mode interference on analog input lines. Enhanced Dual Bit technology is the defining modulator approach and is intended to balance conversion accuracy with implementation cost. A 114 dB dynamic range provides ample signal headroom for high-end audio applications.

The serial digital interface allows digitized audio to be transferred efficiently to a DSP, audio codec, processor, or digital recording system. Delta-sigma conversion makes the AK5385AVS particularly appropriate for audio-band signals where high resolution and linearity are more important than the very low conversion latency required by some communications and control applications. The 28-pin SOP provides a conventional surface-mount footprint suitable for established audio-equipment layouts.

Typical uses include professional audio preamplifiers, multichannel mixers, digital recording equipment, AV amplifiers, musical instruments, and high-end home-audio signal paths. In each case, the converter accepts analog audio and creates 24-bit digital samples at rates up to 216 kHz. Differential input wiring and careful analog grounding are important for preserving the full benefit of the converter's common-mode rejection and 114 dB dynamic range.

Designers should use the manufacturer pin-description table when assigning PCB nets and should treat the analog, digital, and power-supply sections as separate domains. Input and reference routing should be short and symmetric, with filtering placed where the datasheet specifies rather than adding arbitrary capacitance to signal or reference pins. Clock and digital-interface timing must also follow the manufacturer requirements for the selected operating mode.

This product page combines the AK5385AVS conversion specifications, package information, application guidance, and same-family replacement analysis into an engineering-focused overview. It also identifies the limited availability of verified drop-in alternatives rather than presenting cross-package parts as replacements.

直接替換替代品,適用於 AK5385AVS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AK5385AVS (相同外形與佔位) — 差異在於 Converter Type, Package.

AKM (Asahi Kasei Microdevices)
Converter Type: Stereo audio analog-to-digital converter
Package: 28-SOP
比較對象 AK5385AVS →

AK5385BVS

✅ 直接替換 ⚠️ 規格未經驗證
AKM (Asahi Kasei Microdevices)
📦 28-pin SOP
Stereo audio analog-to-digital converter · 24 bit · 2 channels · 192 kHz · 8 kHz to 216 kHz · Enhanced Dual Bit · Serial · 3 V to 5.25 V

聯絡詢價

查看資料表 →

AK5385AVS 最大額定值與電氣特性

Converter Type 24-bit delta-sigma ADC
Number of Channels 2 channels
解析度 24 bit
Maximum Sampling Frequency 216 kHz
Nominal High-End Sampling Rate 192 kHz
Minimum Sampling Frequency 8 kHz
Dynamic Range 114 dB
Architecture Enhanced Dual Bit delta-sigma
Analog Input Configuration Fully differential
Digital Interface Serial
封裝 28-pin SOP
Package Width 7.50 mm
安裝類型 Surface mount
工作溫度範圍 -40 C to +85 C
Envelope and Package Details Surface-mount 28-SOIC, 7.50 mm width

AK5385AVS surface-mount 28-soic, 7.50 mm width 腳位配置指南

AK5385AVS(surface-mount 28-soic, 7.50 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AK5385AVS 的 surface-mount 28-soic, 7.50 mm width 封裝腳位圖

無詳細腳位定義資料: AK5385AVS.

請參閱 資料表 以查看完整腳位配置。

典型應用

AK5385AVS 適用於 6 應用s: Professional Audio Preamplifier, Digital Audio Recorder, High-End AV Amplifier, Musical Instrument Capture, Digital Mixer, Home Audio Signal Processor.

🎧

Professional Audio Preamplifier

The AK5385AVS fits a professional audio preamplifier because it converts two balanced analog channels into 24-bit digital samples at rates from 8 kHz to 216 kHz. According to the manufacturer datasheet, its fully differential input architecture helps reject common-mode interference, while its 114 dB dynamic range preserves signal headroom. It can sit between balanced line inputs and a DSP that handles mixing, level control, routing, or digital recording. Board design should preserve input symmetry, keep return paths short, and maintain a clean separation between the analog converter section and the downstream digital circuitry.

🖥️

Digital Audio Recorder

For a digital recording system, the AK5385AVS provides two-channel, 24-bit conversion across an 8 kHz-to-216 kHz sampling range. The manufacturer datasheet identifies 114 dB dynamic range and enhanced Dual Bit delta-sigma architecture as central characteristics for high-accuracy audio acquisition. The converter can feed recorded PCM streams into a DSP or storage controller. Designers should synchronize the converter clock to the recording engine, observe serial-interface timing, and isolate converter clock signals from sensitive analog input routing.

🔊

High-End AV Amplifier

The AK5385AVS is suitable for the input stage of a high-end AV amplifier because it supports two 24-bit channels and sampling rates up to 216 kHz. According to the manufacturer datasheet, the fully differential inputs and 114 dB dynamic range suit high-end audio signal chains where low-level information must survive conversion. The ADC may precede a digital volume, decoding, or routing stage before a conventional power amplifier. Maintain matched analog input impedance and follow the manufacturer reference layout to avoid introducing gain error or channel imbalance.

🎵

Musical Instrument Capture

The AK5385AVS can capture instrument audio with 24-bit resolution at sampling rates from 8 kHz to 216 kHz. According to the manufacturer datasheet, AK5385A devices are intended for musical instruments as well as AV amplifiers and recorders. The two-channel architecture supports stereo or paired pickup inputs when the source is balanced. Place the converter near the preamplifier to minimize analog trace exposure, and verify grounding and reference arrangements against the manufacturer circuit examples.

🎛️

Digital Mixer

The AK5385AVS supports the multichannel analog front end of a digital mixer by converting two channels at a time to 24-bit digital data. Sampling rates from 8 kHz to 216 kHz provide flexibility for music, speech, and studio capture, while the 114 dB dynamic range helps preserve quiet program material. The converter can feed a dedicated audio DSP that performs gain control, mixing, routing, and effects. Differential input routing and careful clock distribution are essential when several converter pairs operate within one cabinet.

🏠

Home Audio Signal Processor

The AK5385AVS is appropriate for a high-resolution home-audio processor that accepts balanced analog sources and outputs digital audio internally. According to the manufacturer datasheet, the converter supports 24-bit data and rates up to 216 kHz, while its two-channel structure matches common stereo source arrangements. Its differential inputs can help reject ground-related interference in balanced installations. The system should preserve converter timing margins, use a quiet reference implementation, and route high-speed digital signals away from the analog input network.

What is the AK5385AVS?
The AK5385AVS is a two-channel, 24-bit delta-sigma audio ADC from Asahi Kasei Microdevices. According to the manufacturer datasheet, it supports sampling frequencies from 8 kHz to 216 kHz, uses enhanced Dual Bit modulator architecture, and provides 114 dB dynamic range. It is intended for high-end audio systems, AV amplifiers, recorders, and musical instruments.
What are the key specifications of AK5385AVS?
The AK5385AVS provides 24-bit resolution, two audio channels, sampling rates from 8 kHz to 216 kHz, and 114 dB dynamic range in a 28-pin SOP package. According to the manufacturer datasheet, its enhanced Dual Bit delta-sigma architecture and fully differential analog inputs support accurate conversion of high-end audio signals while helping reject common-mode noise.
Where can I download the AK5385AVS datasheet PDF?
The AK5385AVS datasheet PDF is available from the manufacturer-linked data sheet hosted for the AK5385A family at the listed DigiKey media URL. According to the manufacturer datasheet, the document describes the converter's 24-bit architecture, 8 kHz-to-216 kHz sampling range, fully differential inputs, 114 dB dynamic range, electrical characteristics, and package pin information.
Where can I find the AK5385AVS pinout?
Use the manufacturer datasheet's pin-description table to locate the AK5385AVS pinout because the complete signal names are not reproduced here. According to the manufacturer datasheet, the converter uses a 28-pin SOP package with analog inputs, power connections, clock signals, digital data, and control pins. Confirm every connection against the specific ordering code before laying out a PCB.
What is the difference between AK5385AVS and AK5385BVS?
The AK5385AVS is the AKM Semiconductor ordering variant associated with the AK5385A converter family, while AK5385BVS belongs to the related AK5385B family. According to the manufacturer datasheet, the AK5385A provides 24-bit, two-channel conversion with 114 dB dynamic range. Check device revision, timing, voltage, and pin assignments before treating either part as a replacement.
Can AK5385BVS replace AK5385AVS?
AK5385BVS should not be treated as a confirmed drop-in replacement for AK5385AVS without a device-level pin and timing comparison. The related family listing identifies AK5385BVS as an SOP28 device, but the available material does not establish identical electrical ratings, serial timing, or pin functions. The manufacturer datasheet for both order codes is the controlling document for this decision.
What is the best drop-in replacement for AK5385AVS?
No independently verified drop-in replacement is identified for the AK5385AVS. The available cross-reference results contain lookup tools and links to the original component rather than a manufacturer-confirmed, pin-compatible substitute. A sound replacement therefore requires a 28-pin SOP footprint with identical pin functions, compatible supply voltages, matching serial-interface timing, and equivalent 24-bit, two-channel conversion performance.
Is the AK5385AVS suitable for professional audio equipment?
The AK5385AVS is suitable for professional and high-end audio equipment because it combines 24-bit resolution, two channels, operation up to 216 kHz, and 114 dB dynamic range. According to the manufacturer datasheet, intended uses include AV amplifiers, AV recorders, and musical instruments. Its fully differential input arrangement is particularly useful when preserving signal integrity over longer or noisier analog routes.
How should the AK5385AVS be used in a digital recording chain?
Place the AK5385AVS after the microphone or line preamplifier and before the DSP or storage interface. According to the manufacturer datasheet, the two analog channels are converted into 24-bit digital data at rates from 8 kHz to 216 kHz. Use fully differential input routing, separate analog and digital grounding, and the clocking and serial interface arrangement specified by the manufacturer.
Does AK5385AVS use a serial digital audio interface?
Yes, the AK5385AVS uses a serial digital interface. According to the manufacturer datasheet, it is a two-channel 24-bit audio converter with fully differential analog inputs and enhanced Dual Bit delta-sigma architecture. The serial clock, data, and control signals must be connected and timed according to the AK5385A datasheet, with attention to the required operating mode.
What is the operating temperature range of AK5385AVS?
The AK5385AVS is specified for an operating temperature range of -40 C to +85 C. The distributor component record identifies the AK5385AVS as a 28-pin surface-mount serial ADC and reports that temperature range. Keep the assembled device within this range and verify the complete system thermal design at the PCB, enclosure, and adjacent-component levels.
Where can I buy AK5385AVS online?
Use the Request a Quote form on this page to inquire about purchasing the AK5385AVS and confirm current commercial availability. The manufacturer datasheet identifies the part as a 24-bit, two-channel audio ADC, while component listings identify the exact AK5385AVS ordering code. A current quote should confirm stock, lead time, order quantity, and authorized-channel traceability.
What is the price of AK5385AVS?
Submit the AK5385AVS part number through the Request a Quote form on this page for current commercial terms. No current quantity-break pricing is printed in the retrieved listings, so a static price figure would not be reliable. The request should confirm the unit price, minimum order quantity, available shipment quantity, and any pack or tape-and-reel terms.
What is the lead time for AK5385AVS?
Request the current lead time for AK5385AVS through the Request a Quote form on this page. The available component records do not establish a fixed production or fulfillment interval for the exact ordering code. A quotation should confirm manufacturer availability, assembly lead time, stock allocation, and the earliest date on which the ordered quantity can be shipped.
Is AK5385AVS in stock?
Current stock for the exact AK5385AVS should be confirmed through the Request a Quote form on this page. The retrieved product pages identify the part but do not provide a reliable, synchronized stock count for every sales channel. Use the quote request to verify quantity, lot availability, date code, and whether any additional manufacturer allocation is required.
AK5385AVS vs AK5385BVS — which is better for a 24-bit audio design?
Choose the AK5385AVS when the design specifically requires the characterized AK5385A family, including its stated 114 dB dynamic range and fully differential two-channel inputs. The AK5385BVS may belong to a related converter family, but the retrieved information does not prove pin-to-pin or timing compatibility. Review both manufacturer datasheets before selecting the replacement for an existing 28-pin design.

工程參考資料,適用於 AK5385AVS — 比較、設計指引及合規資訊。

選型指南

Choose the AK5385AVS when a new 28-pin SOP audio design needs two-channel, 24-bit delta-sigma conversion, fully differential inputs, and sampling from 8 kHz to 216 kHz. It is particularly appropriate for balanced professional audio, recording, AV amplification, mixer, and musical-instrument inputs where the stated 114 dB dynamic range is important. The related AK5385BVS should be considered only after its manufacturer datasheet confirms matching pin functions, clocking, interface format, supply requirements, and performance. No other verified same-package drop-in substitute was identified, so changing the PCB footprint or accepting a different converter architecture is not a drop-in decision. For existing AK5385A-based boards, retain the exact ordering code and verify lot, date-code, and documentation requirements during procurement.

與替代品比較

參數 本產品 AK5385BVS
Package 28-pin SOP 28-pin SOP
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices
Mounting Type Surface mount Surface mount

主要差異化特點

  • High-resolution stereo conversion (對比AK5385BVS)
  • Broad high-resolution sampling range (對比AK5385BVS)
  • Fully differential high-end audio inputs (對比AK5385BVS)

設計說明

Route the two fully differential analog inputs as short, symmetric pairs and keep them away from the serial clock, digital data, and switching-supply nodes. Use a continuous ground plane for return current, but partition the analog and digital regions according to the manufacturer reference layout. Input impedance, filter values, and reference-routing details should be taken from the manufacturer datasheet rather than inferred from generic ADC layouts.

Treat the converter clock as a high-speed digital signal even though the audio sample rate is comparatively low. Route the clock over a continuous reference plane, avoid stub branches, and provide a clean return path beneath the trace. Maintain spacing from analog inputs and use the manufacturer-recommended interface topology to prevent timing degradation, data errors, or channel-to-channel crosstalk.

Do not treat the 28-pin package size as proof that another 28-pin converter is interchangeable. Verify every pin name, supply voltage, analog reference arrangement, clock mode, serial format, and power-up sequence against the datasheet for each exact ordering code. A physical footprint match alone is insufficient for a safe replacement in an audio design.

Design the analog and digital supply paths so switching ripple and ground bounce do not modulate the converter input or reference voltage. Follow the manufacturer capacitor recommendations, maintain short supply connections, and separate noisy return currents from the analog input region. Confirm startup, shutdown, and rail-sequencing requirements against the specific device documentation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit environmental or material-compliance declarations were identified for the exact AK5385AVS ordering code. AEC-Q100 qualification is not indicated and is treated as not applicable to this audio converter.

相關搜尋

AK5385AVS datasheet AK5385AVS pinout AK5385AVS datasheet pdf AK5385AVS specifications AK5385AVS equivalent AK5385AVS replacement AK5385AVS vs AK5385BVS AK5385AVS 28-SOP pinout AK5385AVS application circuit AK5385AVS price AK5385AVS stock Asahi Kasei AK5385AVS

相關元件與詞彙

Asahi Kasei Microdevices AK5385AVS AK5385A AK5385BVS 24-bit ADC delta-sigma ADC audio analog-to-digital converter Enhanced Dual Bit architecture fully differential input dynamic range sampling frequency serial audio interface 28-pin SOP SOP package family surface-mount semiconductor AV amplifier AV recorder musical instrument digital mixer professional audio digital recording analog-to-digital conversion common-mode rejection serial clock
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情