ATF16V8BQL-15SU - 15ns 5V 8-Macrocell PLD | Microchip
MPN: ATF16V8BQL-15SU ✓ 啟用中ATF16V8BQL-15SU 概覽
A simple programmable logic device, or SPLD, is a user-programmable semiconductor that consolidates gates, registers, and interconnect functions into one compact device. The ATF16V8BQL belongs to the broader hierarchy of programmable logic device, PLD, digital logic IC, and semiconductor. Its eight macrocells can implement practical control, decoding, interface, and state-machine functions without requiring a complex FPGA or microprocessor.
The device operates from a 5 V supply, has a 15 ns speed grade, and offers eight user I/Os alongside up to 16 inputs. Edge-sensing operation and Input Transition Detection support low-power behavior, while automatic low-power mode reduces standby consumption when inputs are idle. The low-power BQL implementation is specifically positioned for designs where both operating performance and reduced standby current are important.
Eight outputs are allocated eight product terms in the generic 16V8 architecture, allowing each macrocell to support registered or combinational logic and configurable feedback. The ATF16V8B architecture is described as a superset of generic 16R8 devices and many 20-pin combinatorial PLDs, making it useful for legacy logic consolidation and compact control designs. A 15 ns grade provides a defined timing target for clocked and combinational implementations.
Typical uses include industrial interface control, status decoding, counter and timer logic, peripheral data selection, simple state machines, and glue logic between slower system blocks. The 20-pin SOIC package is also suitable for prototypes, repair assemblies, and industrial control boards where through-hole PLDs would consume excessive board area. Programming requires a compatible programmer and the device's JEDEC programming file or fuse data.
Designers should account for 5 V input thresholds when interfacing with modern 3.3 V logic. Follow the manufacturer's datasheet for pin assignments, power decoupling, programming-test vectors, AC timing, and absolute maximum ratings. Confirm that the programmed macrocell architecture, feedback assignments, and output enable controls match the intended Boolean equations before production.
This product page combines the manufacturer's device identity and datasheet information with package-focused guidance, practical application guidance, and qualified drop-in replacement analysis. It is intended to accelerate component identification, PCB compatibility checks, and design reviews for engineers maintaining or redesigning 20-pin SPLD-based equipment.
直接替換替代品,適用於 ATF16V8BQL-15SU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF16V8BQL-15SU (相同外形與佔位) — 差異在於 Architecture, Device Type, Maximum Inputs, Package, Product Terms per Output.
ATF16V8BQL-15SC
✅ 直接替換聯絡詢價
查看資料表 →ATF16V8BQL-15XJ
✅ 直接替換📋 參考替代品(不在目錄中)
ATF16V8BQL-15JC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATF16V8BQL-15JS
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATF16V8BQL-15JX
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATF16V8BQL-15SU 最大額定值與電氣特性
| Device Type | Simple Programmable Logic Device (SPLD) |
| Architecture | 16V8 with 8 macrocells |
| Macrocells | 8 |
| Logic Capacity | 250 gates |
| Maximum Inputs | 16 inputs |
| User I/O | 8 I/Os |
| 供應電壓 | 5 V |
| Speed Grade | 15 ns |
| Programmable Technology | Electrically Erasable Flash memory |
| Process Technology | CMOS |
| Low-Power Feature | Edge-sensing with Input Transition Detection (ITD) |
| Standby Current | 5 mA typical |
| Operating Mode | Quarter-power and low-power operation |
| 封裝 | 20-pin SOIC |
| 安裝類型 | Surface Mount |
| Temperature Grade | Industrial temperature |
| Package Environmental Designation | Green |
| 腳位數 | 20 pins |
ATF16V8BQL-15SU green 腳位配置指南
ATF16V8BQL-15SU(green 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF16V8BQL-15SU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF16V8BQL-15SU 適用於 6 應用s: Industrial Interface Control, Status and Address Decoding, Peripheral Data Selection, Counter and Timer Logic, Simple State Machine Control, Legacy Equipment Maintenance.
Industrial Interface Control
The ATF16V8BQL-15SU fits legacy industrial interface control because its eight macrocells can consolidate decode, handshake, and sequencing functions beside the equipment's main processor. The 15 ns speed grade provides a defined propagation target, while the 5 V supply matches conventional industrial logic. Edge-sensing operation and 5 mA typical standby current are useful when the interface must remain responsive but avoid unnecessary active power. The device is placed between processor I/O and external equipment lines, with output enables and registered outputs implementing state transitions. Its 20-pin SOIC package simplifies repair and production-board updates while supporting up to 16 inputs and eight user I/Os.
推薦
Status and Address Decoding
The ATF16V8BQL-15SU is suitable for status decoding where several control signals must be translated into a compact set of enables or commands. Eight macrocells and up to 16 inputs are sufficient to implement product-term decoding, output qualification, and simple priority behavior in a single 20-pin SOIC. A 15 ns grade makes the device appropriate for moderate-speed control paths rather than high-frequency datapaths. The edge-sensing low-power architecture also makes it practical for continuously powered control systems. Engineers can use the programmable product-term structure to replace gates and decode logic while retaining a documented device architecture for maintenance and testing.
推薦
Peripheral Data Selection
The ATF16V8BQL-15SU can implement peripheral multiplexing and data-selection logic around slower processors, memory devices, or measurement blocks. Its eight I/Os and configurable macrocell feedback allow registered outputs to hold data while combinational product terms determine which source is enabled. The 15 ns rating provides predictable timing for legacy bus-control signals, although the design must include the external device setup and hold requirements. Low-power edge sensing helps reduce activity when the selected bus remains idle. Programming the same logic into Flash-based SPLD configuration supports repeatable manufacturing and field reprogramming when the required programmer and device file are available.
推薦
Counter and Timer Logic
The ATF16V8BQL-15SU is appropriate for small counters, elapsed-time dividers, and sequencing logic built around a system clock. Its registered macrocells can implement sequential state transitions, while product terms provide clock, reset, enable, and output-decode functions. The 15 ns grade defines the timing class to compare against the longest feedback path and external setup requirements. Edge-sensing behavior makes the low-power option attractive when the counter or timer can idle between events. In a replacement design, engineers should reproduce the original registered-logic behavior carefully because changing combinational versus registered product terms can alter timing even when the external pin count remains unchanged.
推薦
Simple State Machine Control
Eight macrocells allow the ATF16V8BQL-15SU to implement compact finite-state machines for startup sequencing, mode changes, and fault handling. Each state can be represented by registered outputs, with combinational feedback defining the next state and external inputs selecting transitions. The 5 V operating requirement suits established industrial control boards, and the 20-pin SOIC footprint simplifies direct replacement on existing assemblies. A 15 ns speed grade supports typical low-to-moderate clock rates when the longest feedback loop is analyzed correctly. Low-power edge sensing can reduce active consumption when the machine waits for an event, making the device useful in continuously energized supervisory systems.
推薦
Legacy Equipment Maintenance
The ATF16V8BQL-15SU is valuable for maintaining older 20-pin PLD-based instruments, controllers, and communication equipment. Its architecture supports direct replacement of 16R8-family devices and many 20-pin combinatorial PLDs, reducing the risk of redesigning proven control logic. The 15 ns grade, 5 V supply, eight macrocells, and 20-pin SOIC package reproduce the key implementation characteristics of the target device. Engineers should load the original programming file into a compatible programmer and verify test vectors, especially if the replacement uses a differently suffixed ATF16V8BQL variant. This makes the device useful for both scheduled spare-parts planning and long-term industrial support.
推薦
推薦產品摘要
工程參考資料,適用於 ATF16V8BQL-15SU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF16V8BQL-15SC | ATF16V8BQL-15XJ | ATF16V8BQL-15JC | ATF16V8BQL-15JS | ATF16V8BQL-15JX |
|---|---|---|---|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device |
| Macrocells | 8 | 8 | 8 | 8 | 8 | 8 |
| Speed Grade | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Industrial | Suffix-specific grade | Suffix-specific grade | Suffix-specific grade | Suffix-specific grade | Suffix-specific grade |
主要差異化特點
- Industrial-temperature 15 ns ATF16V8BQL configuration (對比ATF16V8BQL-15SC)
- Eight macrocells in a 20-pin SOIC footprint (對比ATF16V8BQL-15XJ)
- Low-power edge-sensing operation (對比ATF16V8BQL-15JC)
設計說明
Place the ATF16V8BQL-15SU in the same orientation as the original assembly, with pin 1 matching the PCB silkscreen. The 20-pin SOIC footprint is the mechanical constraint for a drop-in replacement, but suffix-specific pin descriptions must still be checked in the manufacturer datasheet. Keep programming and test access reachable so the Flash configuration can be verified during board bring-up.
The ATF16V8BQL-15SU is a 5 V device; do not connect it directly to 3.3 V signals without verifying input thresholds and output levels. Follow the manufacturer's recommended power-decoupling arrangement and route the supply and ground connections to minimize loop area. The low-power architecture does not remove the need to check supply tolerance, startup behavior, and transition currents on the completed board.
Analyze the longest registered-feedback path and the 15 ns speed grade as a complete timing budget rather than assuming every path meets the nominal delay. Include external setup, hold, skew, and propagation requirements in the calculation. For replacement boards, preserve the original logic architecture because changing a product term from combinational to registered can alter both behavior and timing despite an identical package.
Do not confuse a package-compatible suffix with an unconditional equivalent. The target is identified as an industrial-temperature, green 20-SOIC device, while related suffix options can have different qualification or lifecycle attributes. Before substitution, compare the manufacturer ordering information, regenerate the programming file if required, and exercise all asynchronous reset, clock, output-enable, and feedback states through a test vector.
合規資訊
The manufacturer identifies the device with a green package, but explicit target-part RoHS, REACH, halogen-free, lead-free, and conflict-minerals statements were not identified. AEC-Q100 qualification is not stated and is treated as not applicable for this industrial logic device.