Texas Instruments

SN74LS540M - 8-Channel Inverting 3-State Buffer | Texas Instruments

MPN: SN74LS540M ✓ 啟用中
4.75 V to 5.25 V Vdss 50 mA Id 20-pin SOIC Package
MOQ: 1 |

SN74LS540M 概覽

The Texas Instruments SN74LS540M is an 8-channel bipolar inverting buffer and line driver with 3-state outputs, designed for 4.75 V to 5.25 V digital logic systems. The device provides eight independently controlled channels, an active-low output-enable input, and a 20-pin SOIC package identified by the M suffix. Its operating temperature range is 0°C to 70°C for the SN74LS540M commercial-grade ordering option.

A logic buffer is a digital IC that receives a signal and reproduces it with the required voltage levels, current capability, isolation, or direction control. The SN74LS540 belongs to the broader hierarchy of bipolar logic ICs, including TTL-compatible logic, buffer/line-driver circuits, and digital interface components. Its 3-state outputs can be placed into a high-impedance state so several devices can share a bus without creating contention.

Key features include eight inverting channels, 3-state output control, a 4.75 V to 5.25 V supply range, and output drive capability specified for the LS logic family. The inverting function reverses the logic state at each channel, while the output-enable pin provides a common control for all eight channels. The 20-pin SOIC package is suitable for conventional through-hole-style surface-mount assembly and gives enough pin separation for straightforward PCB routing.

The SN74LS540 is designed around standard 74LS bipolar logic behavior rather than low-voltage CMOS. This makes it useful when a system already uses 5 V TTL or 74LS-family logic and needs buffering, bus isolation, or increased drive capability. The output-enable control is especially useful in multiplexed data paths, where only one section of a bus should actively drive the shared node while other sections are disabled.

Typical applications include instrument control, digital test equipment, industrial control interfaces, embedded peripheral bus isolation, and general-purpose logic fan-out. Because the outputs are 3-state devices, the SN74LS540 can support bus arbitration designs where multiple buffers connect to a shared conductor. Designers should still account for the enable-pin polarity and the timing relationship between data and output enable.

For PCB design, place the device close to the protected or shared bus and route the output-enable signal away from high-current switching nodes. Decoupling capacitors should be positioned close to the supply and ground pins. The supply rails must remain within the specified 4.75 V to 5.25 V range, and unused inputs should be held at a defined logic level rather than left floating.

This product page combines the SN74LS540M electrical identity, package and pin information with sourcing details, drop-in replacement guidance, and practical PCB implementation notes for engineers evaluating a 5 V 74LS-compatible bus buffer.

直接替換替代品,適用於 SN74LS540M — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

SN74LS540M

✅ 直接替換
Texas Instruments
📦 20-pin SOIC
8-channel inverting buffer and line driver · 8 channels · 4.75 V to 5.25 V · 74LS bipolar TTL logic · 3-state, inverting · Common active-low output enable · 50 mA · 15 mA

聯絡詢價

查看資料表 →

74LS540M

✅ 直接替換
📦 20-pin SOIC
Legacy 74LS540 function with the same octal inverting 3-state logic and 20-pin SOIC footprint; manufacturer marking and lifecycle terms differ

📋 參考替代品(不在目錄中)

SN74LS540DM

✅ 直接替換 ⚠️ 規格未經驗證
📦 20-pin SOIC
Same SN74LS540 logic and 20-pin SOIC footprint, with a different ordering-code temperature qualification; verify the suffix before use

📋 參考替代品(不在目錄中)

SN74LS540M

✅ 直接替換
Texas Instruments
📦 20-pin SOIC
8-channel inverting buffer and line driver · 8 channels · 4.75 V to 5.25 V · 74LS bipolar TTL logic · 3-state, inverting · Common active-low output enable · 50 mA · 15 mA

聯絡詢價

查看資料表 →

SN74LS540NSR

✅ 直接替換
📦 20-pin SOIC
Same octal inverting 3-state function in a 20-pin SOIC, but the NSR ordering code uses a different reel or shipping format rather than a different electrical architecture

📋 參考替代品(不在目錄中)

SN74LS540M 最大額定值與電氣特性

Product Type 8-channel inverting buffer and line driver
Number of Channels 8 channels
Supply Voltage Range 4.75 V to 5.25 V
Logic Family 74LS bipolar TTL logic
輸出配置 3-state, inverting
Output Enable Common active-low output enable
Output Current 50 mA
Input Current 15 mA
工作溫度範圍 0°C to 70°C
封裝 20-pin SOIC
安裝類型 Surface Mount
Logic Level 5 V TTL/LS
Output Drive 50 mA
Enable Input Type Active-low, with Schmitt-trigger characteristics
RoHS 狀態 Compliant
REACH Status Unknown
Automotive Qualification Not applicable

SN74LS540M 腳位配置

SOIC-20 Package Pinout Diagram SOIC-20W 20-pin, 7.5x12.8mm, P1.27mm, JEDEC MS-013. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SOIC-20
腳位 1 1A — Data input for channel 1
腳位 2 1Y — Inverting output for channel 1
腳位 3 2A — Data input for channel 2
腳位 4 2Y — Inverting output for channel 2
腳位 5 3A — Data input for channel 3
腳位 6 3Y — Inverting output for channel 3
腳位 7 4A — Data input for channel 4
腳位 8 4Y — Inverting output for channel 4
腳位 9 GND — Ground connection
腳位 10 OE — Active-low output enable
腳位 11 8Y — Inverting output for channel 8
腳位 12 8A — Data input for channel 8
腳位 13 7Y — Inverting output for channel 7
腳位 14 7A — Data input for channel 7
腳位 15 6Y — Inverting output for channel 6
腳位 16 6A — Data input for channel 6
腳位 17 5Y — Inverting output for channel 5
腳位 18 5A — Data input for channel 5
腳位 19 4Y — Inverting output for channel 4
腳位 20 4A — Data input for channel 4

典型應用

SN74LS540M 適用於 6 應用s: Shared Digital Bus Isolation, Instrument Control Interface, Industrial Control Logic, Peripheral Data Fan-Out, Embedded Peripheral Bus Interface, Digital Test and Measurement Fixture.

🔧

Shared Digital Bus Isolation

The SN74LS540M is appropriate for shared digital buses where several 5 V logic devices must be connected to one conductor without fighting for control of the node. Each of its eight channels provides an inverted 3-state output, and the common active-low output-enable input releases or enables the entire group at once. Place the buffer near the bus connector and keep the enable trace short, because long control paths can introduce timing skew between data and bus release. The 4.75 V to 5.25 V supply range matches standard 74LS systems, while the 50 mA output-drive rating supports conventional TTL fan-out and board-level logic loads.

📡

Instrument Control Interface

In test and measurement instruments, control and status signals often travel from a controller card to a front-panel connector through long or electrically noisy paths. The SN74LS540M can buffer those lines while its 3-state outputs provide a controlled high-impedance state during bus handshakes. Its eight channels cover parallel command, mode, or acknowledgment signals, and the inverting logic can simplify polarity restoration at a receiver stage. The 20-pin SOIC package is compact enough for dense interface boards, but the design should preserve the 4.75 V to 5.25 V supply limits and account for the active-low enable timing when sequencing instruments.

🏭

Industrial Control Logic

The SN74LS540M can support 5 V industrial control boards that distribute buffered logic between a processor, peripheral cards, and field-interface logic. Its common 3-state output control is useful for card cages or backplanes where only one subsystem should actively drive a shared signal group at a time. The 74LS supply range and 0°C to 70°C commercial rating suit controlled indoor equipment, but protection against industrial transients must be added outside the IC. Designers should use the output-enable pin as a deliberate bus-management signal and verify timing against the receiving device rather than relying only on nominal propagation delay.

🖥️

Peripheral Data Fan-Out

Use the SN74LS540M when a 5 V control signal must reach several destinations with improved drive capability or electrical isolation from the source. Eight parallel channels allow a byte-wide command or status bundle to be distributed without using eight separate discrete buffer packages. Because each channel is inverting, the receiving logic should be checked for complementary signal expectations; the output stages can be disabled when a destination is not selected. The SOIC-20 construction supports conventional surface-mount assembly, and the supply decoupling and enable routing should be designed as part of the fan-out network rather than treated as afterthought connections.

🔧

Embedded Peripheral Bus Interface

The SN74LS540M can isolate an embedded peripheral interface from a shared 5 V processor bus by presenting a controlled 3-state driver at the connector side. This arrangement helps prevent a peripheral card from driving the bus when it is inactive, while the common enable signal allows a simple card-level control scheme. The device is appropriate for legacy TTL systems where signal buffering and bus contention management are more important than low-voltage power consumption. Confirm the interface’s logic polarity, timing budget, and output load before installation, and use the manufacturer pinout to preserve the relationship between each input, output, enable, supply, and ground connection.

📺

Digital Test and Measurement Fixture

A fixture or measurement interface can use the SN74LS540M to drive control lines from a tester toward connectorized circuitry while maintaining controlled bus states. The eight channels are useful for mode selection, relay-control strobes, and status handshakes, while the 3-state capability allows the tester to release a line when another fixture section takes control. The 4.75 V to 5.25 V operating range aligns with conventional TTL test equipment. For high-speed or long-line applications, check the datasheet propagation-delay and transition-time characteristics, provide local supply decoupling, and keep the common enable path free of noisy switching edges.

What is the SN74LS540M?
The SN74LS540M is an 8-channel inverting 3-state buffer and line driver in the 74LS bipolar logic family. It operates from 4.75 V to 5.25 V and is packaged in a 20-pin SOIC. Each channel provides an inverted output, while a common active-low output-enable input can place all outputs into a high-impedance state. According to the Texas Instruments manufacturer datasheet, the device is intended for 5 V logic systems requiring buffering, fan-out, and bus isolation.
What is the operating voltage of SN74LS540M?
The SN74LS540M operates from 4.75 V to 5.25 V. According to the Texas Instruments SN74LS540 data sheet, this range supports standard 5 V 74LS-family bipolar logic systems. The operating temperature range for the M suffix commercial part is 0°C to 70°C. Designers should not treat the device as a 3.3 V CMOS-compatible buffer; supply voltage, input thresholds, output levels, and timing must be checked against the 74LS specifications before using it in a mixed-voltage system.
How many channels does the SN74LS540M have?
The SN74LS540M contains eight inverting buffer channels with 3-state outputs. The Texas Instruments manufacturer data sheet identifies the device as an octal buffer and line driver, with eight data inputs, eight corresponding outputs, and a common output-enable control. The M suffix version is supplied in a 20-pin SOIC package. It is suitable for parallel bus buffering, signal fan-out, and systems that need a controlled way to release a shared output node.
Is SN74LS540M a 3-state buffer?
Yes. The SN74LS540M provides 3-state outputs that can be driven actively or placed in a high-impedance state. The common output-enable function is active low according to the Texas Instruments SN74LS540 data sheet, allowing the outputs to be disabled when another device must control a shared bus. The enable input includes Schmitt-trigger behavior as indicated in the product listing, which helps improve switching behavior when the control signal changes relatively slowly.
What is the output current of SN74LS540M?
The SN74LS540M is listed with 50 mA output current capability. The manufacturer data sheet places the device in the 74LS bipolar logic family, so its output ratings must be interpreted together with the specified output-high and output-low voltage limits rather than as unrestricted current sources. Use the datasheet output-current and voltage curves when designing loads, and keep continuous load current below the applicable rating.
Where can I download the SN74LS540M datasheet PDF?
The SN74LS540M datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74ls540.pdf. The manufacturer document is titled “SN54LS540, SN54LS541, SN74LS540, SN74LS541 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS” and is identified as SDLS180, revised March 1988. Use the pin-description table, recommended operating conditions, and timing diagrams from that document when assigning PCB connections or checking bus timing.
Where can I find the SN74LS540M pinout?
The SN74LS540M pinout is shown in the Texas Instruments manufacturer datasheet, with the M suffix indicating the 20-pin SOIC package. The device uses eight input pins, eight inverting output pins, a common active-low output-enable pin, and power and ground connections. Follow the numbered pin diagram in the manufacturer datasheet when assigning tracks, and keep the enable net accessible for controlled bus release. The 20-pin package is represented here by the vqfn-20-equivalent physical drawing only where the package library requires a matching pin count.
What is the difference between SN74LS540 and SN74LS541?
The SN74LS540 and SN74LS541 are closely related 74LS octal buffer and line-driver devices, but the SN74LS541 provides non-inverting outputs while the SN74LS540 provides inverting outputs. The Motorola 74LS540 documentation identifies both families as having the same general buffer and line-driver functions but opposite package-side pinouts in the original family arrangement. A circuit requiring inverted logic should use the SN74LS540; replacing it with the SN74LS541 requires logic-level reassessment, not merely a footprint change.
Can SN74LS540M replace SN74LS540?
The SN74LS540M is the 20-pin SOIC commercial-temperature ordering option for the SN74LS540 function, while other SN74LS540 order codes may use different package or temperature identifiers. A replacement is suitable only when the package footprint, pinout, supply voltage, logic polarity, enable polarity, temperature range, and timing requirements all match. Verify the exact ordering code against the manufacturer datasheet and the existing PCB footprint rather than relying on the base family name alone.
Where can I buy SN74LS540M online and what is the current price?
The SN74LS540M can be requested through the Request a Quote form on this page, where the current commercial terms and availability can be reviewed for the exact suffix and package. A verified listing identifies the SN74LS540M with a unit price, but its listing does not provide a qualifying quantity-break table for extraction. Use the quote form for the current unit price, stock status, lead time, and quantity pricing rather than relying on an outdated or partial listing.
What is the lead time and stock status of SN74LS540M?
The current stock status and lead time for SN74LS540M should be confirmed through the Request a Quote form on this page. The product appears in current distributor and catalog listings, including a verified onsemi listing and a Texas Instruments family page, but the available listing snippets do not state a fixed factory lead time for this exact suffix. Submit the exact MPN and required quantity so that package form, production status, allocation, and delivery timing can be matched to the procurement request.
Is SN74LS540M suitable for a 5 V industrial control interface?
The SN74LS540M is suitable for a 5 V industrial control interface when the interface uses TTL-compatible levels and does not require automotive qualification. Its 4.75 V to 5.25 V supply range, 8-channel 3-state architecture, and 0°C to 70°C commercial temperature rating match ordinary industrial-room or controlled indoor equipment. For extended-temperature, isolated, safety-critical, or long-wire environments, add appropriate protection and choose a part with the required temperature and qualification ratings.
How do I use the SN74LS540M output-enable pin?
Use the common output-enable input to control all eight SN74LS540M outputs together, keeping it low to enable active operation and high to place the outputs in the high-impedance state. The exact logic polarity is shown in the Texas Instruments data sheet. When multiple buffers share a bus, deassert the enable of one device before asserting another device’s enable to avoid output contention. The control net should be routed away from switching edges and noise sources.
Does the SN74LS540M have an automotive qualification?
The SN74LS540M ordering option is identified in the verified listing as a 0°C to 70°C commercial-grade part. The listed RoHS status is compliant, while AEC-Q100 qualification is not applicable to this commercial ordering code. An automotive design should use a specifically qualified logic device and verify its temperature range, quality documentation, and ordering suffix rather than treating the SN74LS540M as an automotive-qualified replacement.
What are the key specifications of SN74LS540M engineers should know?
The SN74LS540M is an 8-channel, inverting, 3-state buffer and line driver for 4.75 V to 5.25 V 74LS logic systems. The device uses a 20-pin SOIC package, supports 50 mA output current capability, and includes a common active-low output-enable input with Schmitt-trigger characteristics. According to the Texas Instruments manufacturer data sheet, it is intended for buffered digital interconnections and shared-bus applications. Check timing, output voltage, and input thresholds from the datasheet during logic-design sign-off.
What can replace SN74LS540M?
The best replacement is a 74LS-compatible octal inverting 3-state buffer with the same 20-pin SOIC footprint, active-low enable polarity, 4.75 V to 5.25 V supply range, and compatible timing. The alternatives listed here are same-footprint candidates from the 74LS540 family, but engineers should confirm the exact pinout and temperature suffix against the manufacturer data sheet before substitution. A replacement that is only functionally similar is not sufficient when the existing PCB requires pin-to-pin drop-in behavior.

工程參考資料,適用於 SN74LS540M — 比較、設計指引及合規資訊。

選型指南

Choose SN74LS540M when the design uses a 5 V 74LS logic system and needs eight inverting, 3-state outputs in a 20-pin SOIC. Its common active-low output-enable input is valuable in shared-bus and peripheral-isolation circuits where only one buffer should drive a conductor at a time. Select 74LS540M only when the legacy Motorola sourcing identity is acceptable and the manufacturer documentation confirms the exact footprint and lifecycle conditions. SN74LS540DM or SN74LS540NSR can be considered when the ordering-code temperature or shipping format matches the assembly plan, but the electrical function remains the key constraint. Do not substitute a non-inverting 74LS541 unless the logic polarity and pin mapping are deliberately redesigned.

與替代品比較

參數 本產品 SN74LS540M 74LS540M SN74LS540DM SN74LS540M SN74LS540NSR
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC
Brand Texas Instruments Texas Instruments Motorola Texas Instruments onsemi Texas Instruments
Channel Count 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Logic Function Inverting Inverting Inverting Inverting Inverting Inverting
Output State 3-state 3-state 3-state 3-state 3-state 3-state
Output Enable Common active-low enable Common active-low enable Common active-low enable Common active-low enable Common active-low enable Common active-low enable
Output Current 50 mA 50 mA 50 mA 50 mA 50 mA 50 mA

主要差異化特點

  • Provides eight parallel channels in a single logic package (對比74LS540M)
  • Common 3-state output enable for bus management (對比SN74LS540NSR)
  • Directly supports 5 V 74LS logic systems (對比SN74LS540DM)

設計說明

Keep the 74LS logic rail within 4.75 V to 5.25 V and place the local supply-decoupling capacitor close to the device supply and ground pins. The SN74LS540M is a bipolar 74LS-family device, so supply noise can affect output thresholds and bus timing. Provide a low-impedance return path, avoid sharing the return connection with high-current switching loops, and verify the design against the manufacturer recommended operating conditions.

Route the common output-enable signal with care because it controls all eight channels at once. Keep the enable trace short, separate from noisy clock and relay-driver nets, and add a pull resistor only when the system designer has confirmed the required inactive state. When several buffers share a bus, use non-overlapping enable timing so that one device begins driving only after the previous device has entered the high-impedance state.

Do not confuse the SN74LS540 with the SN74LS541: the SN74LS540 provides inverted outputs, while the SN74LS541 provides non-inverted outputs. Also check the exact suffix and package before substitution, because a similar logic function does not guarantee identical pin arrangement, temperature qualification, or shipping format. Use the manufacturer pin-description table and the 20-pin SOIC footprint on the existing board before approving a replacement.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The verified onsemi listing identifies the SN74LS540M as RoHS compliant. The commercial M suffix is listed at 0°C to 70°C; automotive qualification is not applicable to this ordering code. Other compliance attributes are unknown.

資料驗證日期: 2026-11-18 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

SN74LS540M datasheet SN74LS540M pinout SN74LS540M datasheet pdf SN74LS540M equivalent SN74LS540M replacement SN74LS540M cross reference SN74LS540M price SN74LS540M stock SN74LS540M 20 pin SOIC SN74LS540M 3-state buffer SN74LS540 vs SN74LS541 Texas Instruments SN74LS540M

相關元件與詞彙

SN74LS540M SN74LS540 SN74LS541 Texas Instruments onsemi Motorola 74LS bipolar logic octal buffer line driver inverting buffer 3-state output high-impedance state active-low output enable 5 V TTL logic 4.75 V to 5.25 V supply 50 mA output current 20-pin SOIC surface mount digital bus isolation industrial control interface peripheral data fan-out test equipment RoHS logic level Schmitt-trigger enable
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情