ATF22LV10C-10JU - 10ns Low-Voltage EEPLD | Microchip
MPN: ATF22LV10C-10JU ✓ 啟用中ATF22LV10C-10JU 概覽
An EEPLD, or electrically erasable programmable logic device, is a semiconductor that stores a logic configuration in nonvolatile flash memory. It belongs to the programmable-logic-device hierarchy and provides a compact alternative to conventional AND-OR gate arrays when a design needs reconfigurable combinational or registered logic without repeatedly replacing a fixed ASIC.
The device provides 10 macrocells organized into 500 logic gates and supports a 10 ns propagation-delay grade. Its low-voltage architecture permits operation from 3.0 V to 5.5 V, while the optional power-down pin places the device into a low-consumption state with a typical standby current of 10 uA. This combination makes it useful for portable, industrial-control, and general embedded logic implementations.
The ATF22LV10C uses electrically erasable flash memory, allowing the programmed configuration to be retained when power is removed and then reprogrammed as system requirements evolve. The 28-pin PLCC package uses J-leaded surface-mount construction. Industrial-temperature operation extends from -40 C to +85 C, and guaranteed timing, supply-current, and logic-threshold parameters are specified across that range.
Typical applications include industrial control interfaces, legacy peripheral emulation, address decoding, glue logic, keyboard and display controllers, and small embedded systems that need a compact reconfigurable logic block. The 10 ns speed grade also permits operation in higher-speed control paths than slower 15 ns or 30 ns family variants, provided the complete system timing is checked.
Designers should use the pin-description table and programming guidance in the Microchip manufacturer datasheet when assigning package connections. Place decoupling close to the supply pins, keep the power-down control unambiguous, and confirm that every configured macrocell and I/O remains valid at the minimum supply voltage used by the finished product.
This product summary organizes the device's key specifications, pinout considerations, applications, and verified drop-in alternatives. It also highlights practical differences among temperature grades and related ATF22V10C devices so engineers can distinguish electrical compatibility from merely similar catalog specifications before approving a replacement.
直接替換替代品,適用於 ATF22LV10C-10JU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF22LV10C-10JU (相同外形與佔位) — 差異在於 Package, Product Type.
ATF22LV10C-10JC
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10C-10JI
✅ 直接替換📋 參考替代品(不在目錄中)
ATF22LV10C-10JU 最大額定值與電氣特性
| Product Type | Low-voltage electrically erasable programmable logic device |
| Macrocells | 10 macrocells |
| Logic Capacity | 500 gates |
| Propagation Delay | 10 ns |
| Maximum System Frequency | 83.3 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Operating Voltage | 3.3 V or 5 V |
| Power-Down Standby Current | 10 uA typical |
| Memory Technology | Electrically erasable flash memory |
| Technology | Low-power CMOS |
| Power-Down Control | Optional pin-controlled power-down |
| 封裝 | 28-pin PLCC, J-lead surface mount |
| Package Dimensions | 11.51 mm x 11.51 mm |
| 工作溫度範圍 | -40 C to +85 C |
| 安裝類型 | Surface mount |
| AEC-Q100 Qualification | Not applicable |
ATF22LV10C-10JU 11.51 mm x 11.51 mm 腳位配置指南
ATF22LV10C-10JU(11.51 mm x 11.51 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF22LV10C-10JU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF22LV10C-10JU 適用於 6 應用s: Industrial Control Interface Logic, Legacy Peripheral Emulation, Portable and Low-Power Control, Address Decoding and Bus Interfacing, Display and Keyboard Control, Embedded System Power Control.
Industrial Control Interface Logic
The ATF22LV10C-10JU is well suited to compact industrial control boards that require address decoding, command qualification, and discrete sequencing functions without a large FPGA. Its 10 macrocells and 500 gates provide enough capacity for moderate combinational and registered logic, while the 10 ns propagation delay supports an 83.3 MHz maximum system frequency. The industrial -40 C to +85 C range supports equipment expected to operate beyond room-temperature conditions. Its electrically erasable flash configuration also allows design revisions without changing the installed logic device.
推薦
Legacy Peripheral Emulation
The ATF22LV10C-10JU can reproduce small glue-logic sections formerly implemented with multiple gate arrays, allowing obsolete interface behavior to be consolidated into one programmable device. Ten macrocells and 500 gates are suitable for command decoding, register enables, and state-transition logic around legacy peripherals. The 10 ns timing grade provides more margin than slower family members, while 3.0 V to 5.5 V operation supports both 3.3 V and 5 V equipment. Flash-based configuration supports rework and design iteration where mask-programmed alternatives cannot.
推薦
Portable and Low-Power Control
The ATF22LV10C-10JU fits portable and battery-powered products that need retained logic without continuous full-power operation. Its optional pin-controlled power-down mode places the device in a state with 10 uA typical standby current, while electrically erasable flash retains the programmed configuration when power is removed. This architecture is useful for wake logic, sensor-selection logic, and compact mode-control functions. The 3.0 V to 5.5 V range supports common low-voltage rails, although active-state consumption and wake timing must be included in the system energy budget.
推薦
Address Decoding and Bus Interfacing
The ATF22LV10C-10JU can implement address decoding, chip-select generation, and peripheral enable logic around a small embedded controller. Ten macrocells provide a practical limit for moderate decode equations, while the 10 ns propagation delay can accommodate relatively fast control paths. Its 3.3 V and 5 V operating capability permits integration into mixed-voltage legacy systems, subject to the datasheet's input-threshold and output-level limits. The flash configuration is especially useful for products whose peripheral assignments vary across production variants or are changed during qualification.
推薦
Display and Keyboard Control
The ATF22LV10C-10JU is applicable to display, keyboard, and front-panel control logic requiring scan timing, command decoding, and status multiplexing. Its 500-gate capacity and 10 macrocells suit small control matrices rather than large graphics pipelines, and the 83.3 MHz maximum system frequency provides substantial timing headroom for ordinary control paths. The electrically erasable flash configuration supports multiple panel variants without changing the PCB. Designers should calculate worst-case propagation delay for each scan path and confirm that required drive levels match the selected output configuration.
推薦
Embedded System Power Control
The ATF22LV10C-10JU can serve as a compact power-sequencing and supervisory companion to a microcontroller or processor. Flash-retained logic can define rail-enable order, reset qualifiers, and fault-latching behavior, while the optional power-down control supports systems that need to reduce the logic-device contribution when the main processor is inactive. Its 3.0 V to 5.5 V operating range allows use in several industrial rail architectures. Because programmable logic timing is deterministic but device-specific, validate every qualification path against the 10 ns maximum propagation-delay specification.
推薦
推薦產品摘要
工程參考資料,適用於 ATF22LV10C-10JU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF22LV10C-10JC | ATF22LV10C-10JI |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Logic Capacity | 500 gates | 500 gates | 500 gates |
| Propagation Delay | 10 ns | 10 ns | 10 ns |
| Maximum System Frequency | 83.3 MHz | 83.3 MHz | 83.3 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Power-Down Standby Current | 10 uA typical | 10 uA typical | 10 uA typical |
| Memory Type | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Temperature Grade | -40 C to +85 C | Commercial temperature grade | Alternative temperature grade |
主要差異化特點
- Maintains the full 10 ns electrical speed grade (對比ATF22LV10C-10JC)
- Supports the same low-voltage family characteristics as the ATF22LV10C-10JI (對比ATF22LV10C-10JI)
- Avoids the voltage incompatibility of the ATF22V10C family (對比ATF22V10C-10JU)
設計說明
Use the optional power-down input only when the external circuit can guarantee a defined logic level during startup, reset, and shutdown. The PLCC power-down connection is identified as pin 5 by Microchip. Leaving this control in an indeterminate state can prevent the intended 10 uA typical standby state. Account for leakage through nearby high-impedance nets and avoid relying on the power-down function as the only protection for a hazardous output state.
Place the supply bypass capacitor and programmed PLCC as close as practical to the device, and route the power-down control away from long switching nodes. PLCC J-leads provide a larger spacing than fine-pitch packages, but the device still requires careful fanout from the PCB. Keep programming and test access clear of assembly tooling, and verify that the pin-1 orientation agrees with both the PCB footprint and the package drawing before release.
Do not treat every 28-pin ATF22V10C-family device as a substitute for the ATF22LV10C-10JU. The ATF22V10C family is identified as a 5 V device, whereas the LV part supports 3.0 V to 5.5 V. Also, slower 15 ns or 30 ns grades may share a footprint but fail timing requirements. Verify supply voltage, propagation delay, temperature range, and programmed architecture together before approving a replacement.
Evaluate every configured output against its worst-case load, including the 10 ns propagation-delay limit and the datasheet's output-current and output-voltage constraints. Increase sink or source drive only when the selected output mode and device grade support it. For high-speed board-level interconnections, keep clock and control routing short, provide a defined return path, and avoid using long exposed traces adjacent to switching power nodes.
合規資訊
The device is an industrial-temperature programmable logic IC and is not identified as an AEC-Q100 automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the available manufacturer or product-page records.