Microchip Technology

ATF22LV10C-10JU - 10ns Low-Voltage EEPLD | Microchip

MPN: ATF22LV10C-10JU ✓ فعال
3.0 V to 5.5 V Vdss 10 uA typical Id 28-pin PLCC, J-lead surface mount Package 83.3 MHz Speed Electrically erasable flash memory Memory
حداقل سفارش: 1 |

ATF22LV10C-10JU نمای کلی

The Microchip ATF22LV10C-10JU is a low-voltage electrically erasable programmable logic device with 10 macrocells, 500 gates, a 10 ns propagation delay, and a 28-pin PLCC package. It operates across a 3.0 V to 5.5 V supply range and combines electrically erasable flash memory with user-controlled power-down capability for low-power logic systems.

An EEPLD, or electrically erasable programmable logic device, is a semiconductor that stores a logic configuration in nonvolatile flash memory. It belongs to the programmable-logic-device hierarchy and provides a compact alternative to conventional AND-OR gate arrays when a design needs reconfigurable combinational or registered logic without repeatedly replacing a fixed ASIC.

The device provides 10 macrocells organized into 500 logic gates and supports a 10 ns propagation-delay grade. Its low-voltage architecture permits operation from 3.0 V to 5.5 V, while the optional power-down pin places the device into a low-consumption state with a typical standby current of 10 uA. This combination makes it useful for portable, industrial-control, and general embedded logic implementations.

The ATF22LV10C uses electrically erasable flash memory, allowing the programmed configuration to be retained when power is removed and then reprogrammed as system requirements evolve. The 28-pin PLCC package uses J-leaded surface-mount construction. Industrial-temperature operation extends from -40 C to +85 C, and guaranteed timing, supply-current, and logic-threshold parameters are specified across that range.

Typical applications include industrial control interfaces, legacy peripheral emulation, address decoding, glue logic, keyboard and display controllers, and small embedded systems that need a compact reconfigurable logic block. The 10 ns speed grade also permits operation in higher-speed control paths than slower 15 ns or 30 ns family variants, provided the complete system timing is checked.

Designers should use the pin-description table and programming guidance in the Microchip manufacturer datasheet when assigning package connections. Place decoupling close to the supply pins, keep the power-down control unambiguous, and confirm that every configured macrocell and I/O remains valid at the minimum supply voltage used by the finished product.

This product summary organizes the device's key specifications, pinout considerations, applications, and verified drop-in alternatives. It also highlights practical differences among temperature grades and related ATF22V10C devices so engineers can distinguish electrical compatibility from merely similar catalog specifications before approving a replacement.

جایگزین‌های drop-in برای ATF22LV10C-10JU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATF22LV10C-10JU (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

Microchip Technology
Package: 28-pin PLCC
Product Type: Simple programmable logic device (SPLD)
مقایسه با ATF22LV10C-10JU →

ATF22LV10C-10JC

✅ جایگزین مستقیم
Microchip Technology
📦 28-pin PLCC
Simple programmable logic device (SPLD) · CMOS electrically erasable flash programmable logic · 10 macrocells · 500 gates · 10 ns · 3.0 V to 5.5 V · 10 uA typical · 10 mA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF22LV10C-10JI

✅ جایگزین مستقیم
📦 28-pin PLCC
Propagation delay is 10 ns versus 10 ns, a 0% difference; the alternate ordering suffix has a different temperature qualification.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF22LV10C-10JU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Low-voltage electrically erasable programmable logic device
Macrocells 10 macrocells
Logic Capacity 500 gates
Propagation Delay 10 ns
Maximum System Frequency 83.3 MHz
Supply Voltage Range 3.0 V to 5.5 V
Nominal Operating Voltage 3.3 V or 5 V
Power-Down Standby Current 10 uA typical
Memory Technology Electrically erasable flash memory
Technology Low-power CMOS
Power-Down Control Optional pin-controlled power-down
بسته‌بندی 28-pin PLCC, J-lead surface mount
Package Dimensions 11.51 mm x 11.51 mm
محدوده دمای کاری -40 C to +85 C
نوع نصب Surface mount
AEC-Q100 Qualification Not applicable

راهنمای پیکربندی پین ATF22LV10C-10JU 11.51 mm x 11.51 mm

پیکربندی پین برای ATF22LV10C-10JU (پکیج 11.51 mm x 11.51 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 11.51 mm x 11.51 mm برای ATF22LV10C-10JU

داده پین‌آوت تفصیلی موجود نیست برای ATF22LV10C-10JU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATF22LV10C-10JU مناسب است برای 6 کاربردs: Industrial Control Interface Logic, Legacy Peripheral Emulation, Portable and Low-Power Control, Address Decoding and Bus Interfacing, Display and Keyboard Control, Embedded System Power Control.

🏭

Industrial Control Interface Logic

The ATF22LV10C-10JU is well suited to compact industrial control boards that require address decoding, command qualification, and discrete sequencing functions without a large FPGA. Its 10 macrocells and 500 gates provide enough capacity for moderate combinational and registered logic, while the 10 ns propagation delay supports an 83.3 MHz maximum system frequency. The industrial -40 C to +85 C range supports equipment expected to operate beyond room-temperature conditions. Its electrically erasable flash configuration also allows design revisions without changing the installed logic device.

🔧

Legacy Peripheral Emulation

The ATF22LV10C-10JU can reproduce small glue-logic sections formerly implemented with multiple gate arrays, allowing obsolete interface behavior to be consolidated into one programmable device. Ten macrocells and 500 gates are suitable for command decoding, register enables, and state-transition logic around legacy peripherals. The 10 ns timing grade provides more margin than slower family members, while 3.0 V to 5.5 V operation supports both 3.3 V and 5 V equipment. Flash-based configuration supports rework and design iteration where mask-programmed alternatives cannot.

📱

Portable and Low-Power Control

The ATF22LV10C-10JU fits portable and battery-powered products that need retained logic without continuous full-power operation. Its optional pin-controlled power-down mode places the device in a state with 10 uA typical standby current, while electrically erasable flash retains the programmed configuration when power is removed. This architecture is useful for wake logic, sensor-selection logic, and compact mode-control functions. The 3.0 V to 5.5 V range supports common low-voltage rails, although active-state consumption and wake timing must be included in the system energy budget.

🖥️

Address Decoding and Bus Interfacing

The ATF22LV10C-10JU can implement address decoding, chip-select generation, and peripheral enable logic around a small embedded controller. Ten macrocells provide a practical limit for moderate decode equations, while the 10 ns propagation delay can accommodate relatively fast control paths. Its 3.3 V and 5 V operating capability permits integration into mixed-voltage legacy systems, subject to the datasheet's input-threshold and output-level limits. The flash configuration is especially useful for products whose peripheral assignments vary across production variants or are changed during qualification.

📺

Display and Keyboard Control

The ATF22LV10C-10JU is applicable to display, keyboard, and front-panel control logic requiring scan timing, command decoding, and status multiplexing. Its 500-gate capacity and 10 macrocells suit small control matrices rather than large graphics pipelines, and the 83.3 MHz maximum system frequency provides substantial timing headroom for ordinary control paths. The electrically erasable flash configuration supports multiple panel variants without changing the PCB. Designers should calculate worst-case propagation delay for each scan path and confirm that required drive levels match the selected output configuration.

⚡

Embedded System Power Control

The ATF22LV10C-10JU can serve as a compact power-sequencing and supervisory companion to a microcontroller or processor. Flash-retained logic can define rail-enable order, reset qualifiers, and fault-latching behavior, while the optional power-down control supports systems that need to reduce the logic-device contribution when the main processor is inactive. Its 3.0 V to 5.5 V operating range allows use in several industrial rail architectures. Because programmable logic timing is deterministic but device-specific, validate every qualification path against the 10 ns maximum propagation-delay specification.

خلاصه محصولات پیشنهادی

ATF22LV10C-10JC Microchip Technology استفاده‌شده در: Industrial Control Interface Logic, Portable and Low-Power Control, Address Decoding and Bus Interfacing, Display and Keyboard Control, Embedded System Power Control ATF22V10C-10JU related 5 V PLD family member استفاده‌شده در: Industrial Control Interface Logic, Legacy Peripheral Emulation, Address Decoding and Bus Interfacing, Embedded System Power Control ATF22LV10C-10JI pin-compatible related ATF22LV10C option استفاده‌شده در: Legacy Peripheral Emulation, Portable and Low-Power Control, Display and Keyboard Control
What is the ATF22LV10C-10JU?
The ATF22LV10C-10JU is a Microchip low-voltage electrically erasable programmable logic device with 10 macrocells, 500 gates, a 10 ns propagation delay, and a 28-pin PLCC package. According to the Microchip manufacturer datasheet, it stores its configuration in electrically erasable flash memory and operates from 3.0 V to 5.5 V, making it suitable for compact reconfigurable control and interface logic.
What is the operating voltage of the ATF22LV10C-10JU?
The ATF22LV10C-10JU operates from 3.0 V to 5.5 V and is intended for 3.3 V or 5 V systems. According to the Microchip manufacturer datasheet, all supported speed ranges are specified over this voltage interval. Designers should also verify individual timing, input-threshold, and output-current limits at the lowest voltage used by the target circuit.
How fast is the ATF22LV10C-10JU?
The ATF22LV10C-10JU has a 10 ns propagation-delay grade and a maximum system frequency of 83.3 MHz. According to the Microchip manufacturer datasheet, the ATF22LV10C family supports speed options down to 25 ns, while the -10 ordering suffix identifies the faster 10 ns grade. Timing must still be evaluated with the actual output-loading and path arrangement.
Where can I download the ATF22LV10C-10JU datasheet PDF?
The official ATF22LV10C-10JU datasheet PDF is available from Microchip at the manufacturer's document link shown on this page. According to Microchip, the document contains the ATF22LV10C family specifications, package information, power-down behavior, timing characteristics, and programming guidance. Use that manufacturer document for final pin assignments, electrical limits, and design sign-off.
Where can I find the ATF22LV10C-10JU pinout?
The ATF22LV10C-10JU pinout is found in the pin-description table and package drawing in the Microchip manufacturer datasheet. The device uses a 28-pin PLCC package, and the optional power-down function uses pin 5 on PLCC packages according to Microchip. Because the canonical package library has no dedicated PLCC-28 drawing, confirm every connection against the datasheet before PCB release.
What are the key specifications of the ATF22LV10C-10JU that engineers should know?
The ATF22LV10C-10JU combines 10 macrocells, 500 gates, a 10 ns propagation delay, an 83.3 MHz maximum system frequency, and a 3.0 V to 5.5 V operating range. According to the Microchip manufacturer datasheet, its electrically erasable flash configuration is retained without power, while the optional power-down mode reduces standby current to 10 uA typical.
Where can I buy the ATF22LV10C-10JU online?
The ATF22LV10C-10JU can be requested through the Request a Quote form on this page, which routes the exact manufacturer part number and required quantity to XAIPART. The part is identified as a 28-pin PLCC, 500-gate, 10 ns low-voltage EEPLD. Confirm current availability, packaging, and lead time through that form rather than relying on an obsolete inventory listing.
What is the price of the ATF22LV10C-10JU?
Current pricing for the ATF22LV10C-10JU is obtained through the Request a Quote form on this page. The request should identify the exact 10 ns industrial-temperature 28-pin PLCC ordering code and the required quantity so that supply and packaging can be confirmed. Static price figures can become stale and are therefore not used for quotation decisions.
What is the lead time for the ATF22LV10C-10JU?
Lead time for the ATF22LV10C-10JU should be confirmed through the Request a Quote form on this page. Include the required order quantity, preferred package format, and target delivery date in the request. This is particularly important for programmable logic inventory because device age, programming status, and package traceability can affect fulfillment planning.
Is the ATF22LV10C-10JU in stock?
Current stock status for the ATF22LV10C-10JU is handled through the Request a Quote form on this page. The form should be submitted with the quantity and packaging requirement so XAIPART can verify the exact 28-pin PLCC ordering suffix. Because inventory changes by lot and package configuration, treat an individual marketplace availability statement as time-sensitive rather than guaranteed.
When should I choose the ATF22LV10C-10JU over the ATF22LV10C-10JC?
Choose the ATF22LV10C-10JU when the design requires the industrial temperature range of -40 C to +85 C, while the ATF22LV10C-10JC is intended for commercial-temperature use. According to Microchip ordering information, both use the same 28-pin PLCC and 10 ns electrical grade, so the ATF22LV10C-10JU is the appropriate choice when ambient or enclosure temperatures can fall below the commercial range.
What is the difference between ATF22LV10C-10JU and ATF22V10C-10JC?
The principal difference is the low-voltage family: ATF22LV10C supports operation from 3.0 V to 5.5 V, whereas the ATF22V10C is a 5 V device. Both comparison listings identify 10 macrocells, 500 gates, a 10 ns grade, and a 28-pin PLCC, but the ATF22V10C-10JC is not a direct substitute for a 3.3 V design because its lower voltage limit is incompatible.
What is the best drop-in replacement for the ATF22LV10C-10JU?
The ATF22LV10C-10JU has two electrically compatible 28-pin PLCC options identified from the family documentation: ATF22LV10C-10JC and ATF22LV10C-10JI. According to Microchip family information, both retain the 10 macrocell, 500-gate, 10 ns, and 3.3 V/5 V characteristics. The temperature-grade suffix must be checked before accepting either device as a drop-in replacement.
Can ATF22LV10C-10JI replace ATF22LV10C-10JU?
Yes, the ATF22LV10C-10JI can serve as a pin-compatible electrical replacement for the ATF22LV10C-10JU when its temperature grade satisfies the product requirements. Both are 10 ns, 500-gate, 10-macocell low-voltage EEPLDs in a 28-pin PLCC. The principal selection issue is operating-temperature qualification, so compare the guaranteed limits for the complete enclosure and its worst-case conditions.
Is the ATF22LV10C-10JU suitable for low-power embedded systems?
The ATF22LV10C-10JU is suitable for low-power embedded systems when its configurable logic capacity is sufficient and the system can be programmed with the same flash-memory architecture. According to the Microchip manufacturer datasheet, user-controlled power-down reduces standby current to 10 uA typical. Active operation still consumes power, so total energy must be evaluated across wake, programming, and run states.
What is the best Microchip equivalent for the ATF22LV10C-10JU?
The closest same-manufacturer options are the ATF22LV10C-10JC and ATF22LV10C-10JI because each retains the 10 macrocells, 500 gates, 10 ns speed grade, low-voltage operation, and 28-pin PLCC format. According to Microchip family documentation, temperature range is the decisive difference. No cross-brand drop-in equivalent was identified from the available family comparison records.

داده‌های مرجع مهندسی برای ATF22LV10C-10JU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ATF22LV10C-10JU for a 28-pin PLCC design requiring 10 macrocells, 500 gates, a 10 ns propagation delay, and operation across 3.0 V to 5.5 V in an industrial-temperature environment. Choose the ATF22LV10C-10JC when its commercial-temperature limits adequately cover the product; its core electrical configuration matches the target. Choose the ATF22LV10C-10JI when its distinct temperature qualification satisfies the system while retaining the same 10 ns low-voltage architecture. Do not select the ATF22V10C-10JU for a 3.3 V-only circuit because that family is specified for 5 V operation. Also avoid slower 15 ns and 30 ns family grades unless timing, power, and qualification requirements are less restrictive. For every candidate, confirm the 28-pin PLCC footprint, programming method, memory organization, and pin-compatible power-down implementation in the Microchip manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF22LV10C-10JC ATF22LV10C-10JI
Brand Microchip Technology Microchip Technology Microchip Technology
Package 28-pin PLCC 28-pin PLCC 28-pin PLCC
Macrocells 10 macrocells 10 macrocells 10 macrocells
Logic Capacity 500 gates 500 gates 500 gates
Propagation Delay 10 ns 10 ns 10 ns
Maximum System Frequency 83.3 MHz 83.3 MHz 83.3 MHz
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Power-Down Standby Current 10 uA typical 10 uA typical 10 uA typical
Memory Type Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory
Temperature Grade -40 C to +85 C Commercial temperature grade Alternative temperature grade

تفاوت‌های کلیدی

  • Maintains the full 10 ns electrical speed grade (در مقابلATF22LV10C-10JC)
  • Supports the same low-voltage family characteristics as the ATF22LV10C-10JI (در مقابلATF22LV10C-10JI)
  • Avoids the voltage incompatibility of the ATF22V10C family (در مقابلATF22V10C-10JU)

یادداشت‌های طراحی

Use the optional power-down input only when the external circuit can guarantee a defined logic level during startup, reset, and shutdown. The PLCC power-down connection is identified as pin 5 by Microchip. Leaving this control in an indeterminate state can prevent the intended 10 uA typical standby state. Account for leakage through nearby high-impedance nets and avoid relying on the power-down function as the only protection for a hazardous output state.

Place the supply bypass capacitor and programmed PLCC as close as practical to the device, and route the power-down control away from long switching nodes. PLCC J-leads provide a larger spacing than fine-pitch packages, but the device still requires careful fanout from the PCB. Keep programming and test access clear of assembly tooling, and verify that the pin-1 orientation agrees with both the PCB footprint and the package drawing before release.

Do not treat every 28-pin ATF22V10C-family device as a substitute for the ATF22LV10C-10JU. The ATF22V10C family is identified as a 5 V device, whereas the LV part supports 3.0 V to 5.5 V. Also, slower 15 ns or 30 ns grades may share a footprint but fail timing requirements. Verify supply voltage, propagation delay, temperature range, and programmed architecture together before approving a replacement.

Evaluate every configured output against its worst-case load, including the 10 ns propagation-delay limit and the datasheet's output-current and output-voltage constraints. Increase sink or source drive only when the selected output mode and device grade support it. For high-speed board-level interconnections, keep clock and control routing short, provide a defined return path, and avoid using long exposed traces adjacent to switching power nodes.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device is an industrial-temperature programmable logic IC and is not identified as an AEC-Q100 automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the available manufacturer or product-page records.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATF22LV10C-10JU datasheet ATF22LV10C-10JU pinout ATF22LV10C-10JU datasheet pdf ATF22LV10C-10JU equivalent ATF22LV10C-10JU replacement ATF22LV10C-10JU price ATF22LV10C-10JU stock ATF22LV10C-10JU 28 pin PLCC ATF22LV10C-10JU 10ns 3.3V ATF22LV10C-10JU vs ATF22LV10C-10JC ATF22LV10C-10JU industrial control logic Microchip ATF22LV10C-10JU

قطعات و اصطلاحات مرتبط

Microchip Technology ATF22LV10C-10JU ATF22LV10C-10JC ATF22LV10C-10JI ATF22V10C-10JU ATF22V10C-10JC ATF22LV10CQZ-30JU electrically erasable programmable logic device EEPLD programmable logic device PLD low-voltage CMOS PLD semiconductor electrically erasable flash memory 10 macrocells 500 gates 10 ns propagation delay 83.3 MHz maximum system frequency 3.0 V to 5.5 V power supply 10 uA standby current 28-pin PLCC J-lead surface-mount package industrial temperature range address decoding peripheral emulation power-down control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ