ATF22V10C-10PI - 10ns 500-Gate EE PLD | Microchip Technology
MPN: ATF22V10C-10PI ✓ 啟用中ATF22V10C-10PI 概覽
A simple programmable logic device is a programmable-logic IC used to implement fixed Boolean functions through user-selected connections and equations. In the broader semiconductor hierarchy, an SPLD belongs to the programmable-logic-device family, which sits below CPLD and FPGA technology. ATF22V10C devices are intended for compact control logic where a small macrocell count and straightforward programming workflow are sufficient.
The ATF22V10C family offers speed grades down to 5 ns and typical power dissipation as low as 10 µA. The ATF22V10C-10PI is the 10 ns industrial-temperature version in a 24-pin PDIP package. Each of its 10 macrocells can support combinational or registered logic, while the device architecture provides product terms for implementing common control, decoding, and state-machine functions.
An optional pin-controlled power-down function is available in the ATF22V10C family. On DIP and SOIC packages, the PD control is assigned to pin 4. This feature can reduce current consumption when a system does not require the programmed logic to remain active, although the exact power-saving behavior should be confirmed against the manufacturer datasheet for the selected operating mode.
Typical uses include industrial interface logic, legacy bus decoding, control-panel signal processing, peripheral data conditioning, and compact embedded-control functions. The 24-pin PDIP format is particularly useful for prototypes, maintenance systems, educational platforms, and designs that retain through-hole construction rather than adopting a surface-mount package.
When designing around this device, program it with compatible logic-development software and verify the configured equations, pin assignments, and power-down behavior before releasing a PCB. Do not assume electrical or timing equivalence with a generic GAL22V10 without checking the fuse map, voltage tolerance, speed grade, AC timing, and power behavior in the manufacturer datasheet.
This product page combines the device’s electrical characteristics, package details, application guidance, drop-in candidates, and engineering cautions. It also distinguishes verified same-package alternatives from functionally related parts, helping designers make a replacement decision without assuming that identical logic functionality guarantees identical timing, programming, or power characteristics.
直接替換替代品,適用於 ATF22V10C-10PI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF22V10C-10PI (相同外形與佔位) — 差異在於 Device Type, Package.
ATF22V10C-10PC
✅ 直接替換聯絡詢價
查看資料表 →ATF22V10B-10PI
✅ 直接替換📋 參考替代品(不在目錄中)
PALCE22V10-10DMB
✅ 直接替換📋 參考替代品(不在目錄中)
ATF22V10C-10PI 最大額定值與電氣特性
| Device Type | Simple programmable logic device (SPLD) |
| Architecture | Electrically erasable CMOS programmable logic device |
| Program Memory Technology | Electrically erasable Flash memory |
| Logic Capacity | 500 gates |
| Macrocells | 10 macrocells |
| Propagation Delay | 10 ns |
| Family Speed Range | Down to 5 ns |
| Nominal Supply Voltage | 5 V |
| Industrial Supply Range | 5 V ± 10% |
| Commercial Supply Range | 5 V ± 5% |
| Typical Power Dissipation | 10 µA |
| 封裝 | 24-pin PDIP |
| 安裝類型 | Through-hole |
| Optional Power-Down Control | Pin 4 on DIP and SOIC packages |
| Temperature Grade | Industrial |
ATF22V10C-10PI 24-pin pdip 腳位配置指南
ATF22V10C-10PI(24-pin pdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF22V10C-10PI.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF22V10C-10PI 適用於 6 應用s: Industrial Control and Sequence Logic, Interface and Bus Signal Conditioning, Legacy Control-System Replacement, Decoder and Address-Selection Logic, Prototyping and Educational Logic Platforms, Peripheral Data Conditioning.
Industrial Control and Sequence Logic
The ATF22V10C-10PI fits compact industrial control blocks that combine decoding, interlocks, and state transitions in one programmable device. Its 10 macrocells provide sufficient capacity for multiple Boolean equations, while the 10 ns speed grade supports short combinational control paths. The industrial suffix and 5 V ± 10% supply range suit equipment designed around a nominal 5 V rail. A designer can place programmed logic between sensors, relay drivers, and actuator controls instead of implementing the same functions with separate gates. The 24-pin PDIP package also simplifies prototype construction and serviceable legacy-control boards.
推薦
Interface and Bus Signal Conditioning
The ATF22V10C-10PI is useful for adapting parallel logic signals into a form that a controller or peripheral can interpret more reliably. Its 10 macrocells can implement input qualification, command decoding, output masking, and state-dependent gating, while the 10 ns propagation delay provides defined timing for many control-interface tasks. Electrically erasable Flash configuration allows the logic equations to be revised without replacing the device. Engineers should use the manufacturer pin table and timing curves to confirm signal polarity, setup requirements, and output loading before assigning the ten available macrocell outputs.
推薦
Legacy Control-System Replacement
ATF22V10C-10PI can support maintenance and modernization of equipment built around 22V10-compatible programmable logic. Because the device retains a 24-pin PDIP footprint, a board-level replacement can be evaluated without changing the through-hole mechanical format. The 10 macrocells and approximately 500 gates cover the compact logic sections commonly found in older control products. Before installation, compare the original and replacement fuse maps, check registered versus combinational output behavior, and confirm voltage and timing requirements. This makes the device suitable for carefully qualified repair platforms and controlled obsolescence programs.
推薦
Decoder and Address-Selection Logic
The ATF22V10C-10PI can implement decoder and selection logic for compact embedded systems that need a fixed Boolean mapping rather than a reprogrammable FPGA. Its 10 macrocells allow several address or command conditions to be combined into a limited set of outputs. The 10 ns speed grade makes timing assessment more manageable in short control paths, and electrically erasable Flash permits repeatable configuration during production or field updates. Designers should establish the required output count and equations first, then use the pin-description and logic-programming tools to ensure that every output and input has a deliberate assignment.
推薦
Prototyping and Educational Logic Platforms
The ATF22V10C-10PI is well suited to logic prototyping because it combines reusable programmable behavior with a straightforward 24-pin through-hole package. Students and engineers can implement counters, state machines, traffic sequencing, and conditional control functions without constructing fixed gate-array boards. A nominal 5 V operating environment simplifies laboratory power design, while the 10 ns grade supports demonstration of propagation-delay effects. Because the device stores its configuration electrically, one package can be reprogrammed for multiple experiments. Training material should include proper decoupling, programming-tool setup, unused-pin treatment, and output loading checks to prevent misleading results.
推薦
Peripheral Data Conditioning
The ATF22V10C-10PI can condition peripheral signals by combining input states, generating enable or strobe outputs, and implementing simple finite-state behavior around an external device. Its 10 macrocells are appropriate when the required equations fit the 22V10 architecture, and the 10 ns speed grade offers a useful timing margin for many conventional peripheral-control schemes. Electrically erasable Flash allows firmware or production engineering changes without a new programmable part. The design should define signal polarity and reset behavior before programming, then verify setup time, output delay, and power-down behavior against the manufacturer datasheet for the selected package.
推薦
推薦產品摘要
工程參考資料,適用於 ATF22V10C-10PI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF22V10C-10PC | ATF22V10B-10PI | PALCE22V10-10DMB |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP |
| Device Type | 22V10 SPLD | 22V10 SPLD | 22V10 SPLD | PALCE22V10 SPLD |
| Propagation Delay | 10 ns | 10 ns | 10 ns | 10 ns |
| Nominal Supply Voltage | 5 V | 5 V | 5 V | 5 V |
主要差異化特點
- Industrial-temperature option within the ATF22V10C family (對比ATF22V10C-10PC)
- Electrically erasable Flash configuration in the ATF22V10C architecture (對比ATF22V10B-10PI)
- Direct 24-pin PDIP fit with a defined 10 ns speed grade (對比PALCE22V10-10DMB)
設計說明
Treat a 22V10 replacement as a qualified device decision rather than a mechanical substitution. Compare the pin table, fuse map, output polarity, register configuration, propagation delay, supply range, and unused-pin requirements for the original and candidate parts. The ATF22V10C family is described as pin-to-pin and JEDEC fusemap compatible with GAL22V10, but minor AC and DC differences can still affect timing margins or unused-input behavior.
Design the 5 V supply around the appropriate temperature-grade tolerance. The manufacturer specifies 5 V ± 10% for military and industrial ranges and 5 V ± 5% for the commercial range. Include local supply decoupling close to the device and avoid long supply traces that could degrade switching thresholds. Review active and power-down current in the datasheet because the family’s typical low-power figure of 10 µA does not represent the current drawn while outputs are switching.
Use the 24-pin PDIP outline and pin numbering from the manufacturer package drawing when laying out the board. Keep the optional power-down connection at pin 4 in view during schematic review, and follow the datasheet requirements for unused inputs and outputs. For long external lines, add appropriate input conditioning and buffering; a 10 ns device can still produce incorrect system results when propagation, skew, or input thresholds are not included in the end-to-end timing budget.
Program and verify the device before inserting it into a high-value assembly. Electrically erasable Flash allows repeated configuration, but a wrong equation, output enable, or power-down setting can create misleading test results or unintended switching. Archive the programming file, record the device identifier, and perform a power-up test with external drivers disconnected. For production work, add a configuration checksum or programming-status check to the surrounding test process.
合規資訊
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for the exact MPN.