Microchip Technology

ATF22V10C-10PI - 10ns 500-Gate EE PLD | Microchip Technology

부품 번호: ATF22V10C-10PI ✓ 활성
5 V Vdss 24-pin PDIP Package Down to 5 ns Speed Electrically erasable Flash memory Memory
MOQ: 1 |

ATF22V10C-10PI 개요

The Microchip Technology ATF22V10C-10PI is a 500-gate electrically erasable programmable logic device with 10 macrocells, a 10 ns propagation delay, and a 24-pin PDIP package. It operates from a nominal 5 V supply and combines reusable CMOS PLD architecture with electrically erasable Flash memory programming.

A simple programmable logic device is a programmable-logic IC used to implement fixed Boolean functions through user-selected connections and equations. In the broader semiconductor hierarchy, an SPLD belongs to the programmable-logic-device family, which sits below CPLD and FPGA technology. ATF22V10C devices are intended for compact control logic where a small macrocell count and straightforward programming workflow are sufficient.

The ATF22V10C family offers speed grades down to 5 ns and typical power dissipation as low as 10 µA. The ATF22V10C-10PI is the 10 ns industrial-temperature version in a 24-pin PDIP package. Each of its 10 macrocells can support combinational or registered logic, while the device architecture provides product terms for implementing common control, decoding, and state-machine functions.

An optional pin-controlled power-down function is available in the ATF22V10C family. On DIP and SOIC packages, the PD control is assigned to pin 4. This feature can reduce current consumption when a system does not require the programmed logic to remain active, although the exact power-saving behavior should be confirmed against the manufacturer datasheet for the selected operating mode.

Typical uses include industrial interface logic, legacy bus decoding, control-panel signal processing, peripheral data conditioning, and compact embedded-control functions. The 24-pin PDIP format is particularly useful for prototypes, maintenance systems, educational platforms, and designs that retain through-hole construction rather than adopting a surface-mount package.

When designing around this device, program it with compatible logic-development software and verify the configured equations, pin assignments, and power-down behavior before releasing a PCB. Do not assume electrical or timing equivalence with a generic GAL22V10 without checking the fuse map, voltage tolerance, speed grade, AC timing, and power behavior in the manufacturer datasheet.

This product page combines the device’s electrical characteristics, package details, application guidance, drop-in candidates, and engineering cautions. It also distinguishes verified same-package alternatives from functionally related parts, helping designers make a replacement decision without assuming that identical logic functionality guarantees identical timing, programming, or power characteristics.

드롭인 대체품: ATF22V10C-10PI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATF22V10C-10PI (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package.

Microchip Technology
Device Type: Electrically erasable programmable logic device (EEPLD)
Package: 24-pin PDIP, 0.300-inch pitch
비교 대상: ATF22V10C-10PI →

ATF22V10C-10PC

✅ 드롭인
Microchip Technology
📦 24-pin PDIP
Electrically erasable programmable logic device (EEPLD) · Electrically erasable Flash memory · 10 macrocells · 500 gates · 10 ns · 125 MHz · 5 V · 5.25 V

가격 문의

데이터시트 보기 →

ATF22V10B-10PI

✅ 드롭인
📦 24-pin PDIP
Same 10 ns speed and 24-pin PDIP package; older ATF22V10B generation with a different fuse-map implementation

📋 참조 대체품 (카탈로그에 없음)

PALCE22V10-10DMB

✅ 드롭인
📦 24-pin PDIP
Same 10 ns speed and 24-pin PDIP package; PALCE22V10 family requires fuse-map and AC/DC compatibility verification

📋 참조 대체품 (카탈로그에 없음)

ATF22V10C-10PI 최대 정격 & 전기적 특성

Device Type Simple programmable logic device (SPLD)
Architecture Electrically erasable CMOS programmable logic device
Program Memory Technology Electrically erasable Flash memory
Logic Capacity 500 gates
Macrocells 10 macrocells
Propagation Delay 10 ns
Family Speed Range Down to 5 ns
Nominal Supply Voltage 5 V
Industrial Supply Range 5 V ± 10%
Commercial Supply Range 5 V ± 5%
Typical Power Dissipation 10 µA
패키지 24-pin PDIP
실장 유형 Through-hole
Optional Power-Down Control Pin 4 on DIP and SOIC packages
Temperature Grade Industrial

ATF22V10C-10PI 24-pin pdip 핀 구성 가이드

ATF22V10C-10PI(24-pin pdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATF22V10C-10PI의 24-pin pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATF22V10C-10PI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATF22V10C-10PI 적합 용도: 6 애플리케이션s: Industrial Control and Sequence Logic, Interface and Bus Signal Conditioning, Legacy Control-System Replacement, Decoder and Address-Selection Logic, Prototyping and Educational Logic Platforms, Peripheral Data Conditioning.

🏭

Industrial Control and Sequence Logic

The ATF22V10C-10PI fits compact industrial control blocks that combine decoding, interlocks, and state transitions in one programmable device. Its 10 macrocells provide sufficient capacity for multiple Boolean equations, while the 10 ns speed grade supports short combinational control paths. The industrial suffix and 5 V ± 10% supply range suit equipment designed around a nominal 5 V rail. A designer can place programmed logic between sensors, relay drivers, and actuator controls instead of implementing the same functions with separate gates. The 24-pin PDIP package also simplifies prototype construction and serviceable legacy-control boards.

🔧

Interface and Bus Signal Conditioning

The ATF22V10C-10PI is useful for adapting parallel logic signals into a form that a controller or peripheral can interpret more reliably. Its 10 macrocells can implement input qualification, command decoding, output masking, and state-dependent gating, while the 10 ns propagation delay provides defined timing for many control-interface tasks. Electrically erasable Flash configuration allows the logic equations to be revised without replacing the device. Engineers should use the manufacturer pin table and timing curves to confirm signal polarity, setup requirements, and output loading before assigning the ten available macrocell outputs.

🖥️

Legacy Control-System Replacement

ATF22V10C-10PI can support maintenance and modernization of equipment built around 22V10-compatible programmable logic. Because the device retains a 24-pin PDIP footprint, a board-level replacement can be evaluated without changing the through-hole mechanical format. The 10 macrocells and approximately 500 gates cover the compact logic sections commonly found in older control products. Before installation, compare the original and replacement fuse maps, check registered versus combinational output behavior, and confirm voltage and timing requirements. This makes the device suitable for carefully qualified repair platforms and controlled obsolescence programs.

🔧

Decoder and Address-Selection Logic

The ATF22V10C-10PI can implement decoder and selection logic for compact embedded systems that need a fixed Boolean mapping rather than a reprogrammable FPGA. Its 10 macrocells allow several address or command conditions to be combined into a limited set of outputs. The 10 ns speed grade makes timing assessment more manageable in short control paths, and electrically erasable Flash permits repeatable configuration during production or field updates. Designers should establish the required output count and equations first, then use the pin-description and logic-programming tools to ensure that every output and input has a deliberate assignment.

🔧

Prototyping and Educational Logic Platforms

The ATF22V10C-10PI is well suited to logic prototyping because it combines reusable programmable behavior with a straightforward 24-pin through-hole package. Students and engineers can implement counters, state machines, traffic sequencing, and conditional control functions without constructing fixed gate-array boards. A nominal 5 V operating environment simplifies laboratory power design, while the 10 ns grade supports demonstration of propagation-delay effects. Because the device stores its configuration electrically, one package can be reprogrammed for multiple experiments. Training material should include proper decoupling, programming-tool setup, unused-pin treatment, and output loading checks to prevent misleading results.

⚡

Peripheral Data Conditioning

The ATF22V10C-10PI can condition peripheral signals by combining input states, generating enable or strobe outputs, and implementing simple finite-state behavior around an external device. Its 10 macrocells are appropriate when the required equations fit the 22V10 architecture, and the 10 ns speed grade offers a useful timing margin for many conventional peripheral-control schemes. Electrically erasable Flash allows firmware or production engineering changes without a new programmable part. The design should define signal polarity and reset behavior before programming, then verify setup time, output delay, and power-down behavior against the manufacturer datasheet for the selected package.

추천 제품 요약

ATF22V10C-10PC Microchip Technology 사용처: Industrial Control and Sequence Logic, Legacy Control-System Replacement, Decoder and Address-Selection Logic, Prototyping and Educational Logic Platforms ATF22V10B-10PI same-family 10 ns PDIP alternative 사용처: Industrial Control and Sequence Logic, Legacy Control-System Replacement, Decoder and Address-Selection Logic, Prototyping and Educational Logic Platforms PALCE22V10-10DMB same-package related 22V10 programmable-logic device 사용처: Interface and Bus Signal Conditioning, Peripheral Data Conditioning ATF22V10C-10PI Microchip Technology 사용처: Interface and Bus Signal Conditioning, Peripheral Data Conditioning
What is the ATF22V10C-10PI programmable logic device?
The ATF22V10C-10PI is a Microchip Technology 500-gate, 10-macrocell simple programmable logic device in a 24-pin PDIP package. It uses electrically erasable Flash memory and has a 10 ns speed grade. According to the manufacturer datasheet doc0735, the ATF22V10C family implements reusable CMOS logic for compact control and decoding functions.
What is the propagation delay of the ATF22V10C-10PI?
The ATF22V10C-10PI has a nominal propagation delay of 10 ns. The larger ATF22V10C family includes grades down to 5 ns, so engineers should select the exact speed suffix rather than assuming every family member has the same timing. The manufacturer datasheet doc0735 defines the electrical limits for the ATF22V10C speed ranges.
How many macrocells and gates does ATF22V10C-10PI provide?
The ATF22V10C-10PI provides 10 macrocells and approximately 500 gates of programmable logic. Its ten output-oriented macrocells can be assigned to combinational or registered functions, making the device useful for moderate control logic rather than large FPGA-class designs. According to the manufacturer datasheet doc0735, the device is based on an electrically erasable Flash-memory PLD architecture.
Where can I download the ATF22V10C-10PI datasheet PDF?
The official ATF22V10C-10PI datasheet PDF is available from Microchip Technology at the manufacturer URL listed on this page. The document is identified as doc0735 and describes the family’s electrical characteristics, Flash-memory architecture, speed grades, operating supply ranges, power-down option, and package information. Use the manufacturer copy when assigning pins or validating timing.
Where is the ATF22V10C-10PI pinout located?
The ATF22V10C-10PI pinout is located in the pin-description section and package drawing of the manufacturer datasheet doc0735. The device uses a 24-pin PDIP package, and the optional power-down control is identified as pin 4 on DIP packages. Use the datasheet pin table to assign every signal and verify no-connect positions before routing a board.
How do I program the ATF22V10C-10PI?
Program the ATF22V10C-10PI with logic-development software that supports the ATF22V10C architecture and its fuse-map representation. According to the manufacturer datasheet doc0735, the configuration is stored in electrically erasable Flash memory, allowing the programmed logic to be erased and rewritten. Confirm device recognition, pin assignments, equations, and power-down configuration in the programming report.
What supply voltage does ATF22V10C-10PI use?
The ATF22V10C-10PI uses a nominal 5 V supply. According to the manufacturer datasheet doc0735, the industrial speed range is specified over 5 V ± 10%, while the commercial range uses 5 V ± 5%. The suffix and operating-temperature grade should therefore be checked against the actual system supply tolerance before the device is approved.
Does ATF22V10C-10PI have a power-down pin?
Yes, the ATF22V10C family includes an optional pin-controlled power-down function. The manufacturer datasheet doc0735 identifies the PD control as pin 4 on DIP and SOIC packages. Because power-down behavior can depend on the programmed configuration and operating state, confirm its timing and current implications in the datasheet before using it as a system shutdown control.
What can replace the ATF22V10C-10PI on the same PCB?
The ATF22V10C-10PC is the closest same-package candidate identified for replacement, with the same 10 ns speed designation and 24-pin PDIP format, but its temperature grade differs. The ATF22V10B-10PI is another 24-pin PDIP option in the related family. Neither substitution should be made without checking fuse-map, AC timing, DC limits, and temperature requirements in the respective datasheets.
Is ATF22V10C-10PI pin-compatible with GAL22V10D replacements?
The ATF22V10C family is commonly discussed as a replacement for GAL22V10 devices, but shared logic capacity does not by itself prove complete interchangeability. According to Microchip’s GAL22V10 replacement information, the ATF22V10C family is pin-to-pin and JEDEC fusemap compatible, with similar AC and DC characteristics plus minor differences. Verify the specific alternative’s package, speed, and voltage ratings.
When should I choose ATF22V10C-10PI over ATF22V10C-10PC?
Choose ATF22V10C-10PI when the equipment requires the industrial-temperature option and operates across the 5 V ± 10% industrial supply range. Choose ATF22V10C-10PC when the commercial-temperature range is sufficient. Both have a 10 ns speed designation and a 24-pin PDIP package, so temperature and electrical limits—not logic functionality—should determine the final selection.
Is ATF22V10C-10PI suitable for industrial control logic?
The ATF22V10C-10PI is suitable for compact industrial-control logic requiring reusable programmable logic, a 10 ns speed grade, and a through-hole package. The industrial suffix supports operation over the manufacturer’s 5 V ± 10% range. For safety-critical machinery, verify device qualification, system operating temperature, and applicable machine-safety requirements separately.
What is the difference between ATF22V10B-10PI and ATF22V10C-10PI?
Both parts are associated with a 10 ns, 24-pin PDIP implementation in the ATF22V10 family, but they belong to different generations. The ATF22V10B is the earlier-generation device, while the ATF22V10C uses electrically erasable Flash memory. Treat them as related drop-in candidates, not automatically identical, until the fuse map and electrical characteristics have been checked.
Where can I buy ATF22V10C-10PI and request a quote?
Use the Request a Quote form on this page to request ATF22V10C-10PI pricing, current availability, lead time, and minimum-order details. The request should include the required quantity, shipment destination, and whether reels, tubes, or another approved shipping format are needed. The form is the appropriate route for a transaction-specific response.
What are the key ATF22V10C-10PI specifications engineers should know?
The key ATF22V10C-10PI specifications are 10 macrocells, approximately 500 gates, a 10 ns propagation-delay grade, a nominal 5 V supply, electrically erasable Flash configuration memory, optional pin-controlled power-down, and a 24-pin PDIP package. According to the manufacturer datasheet doc0735, the industrial supply range is 5 V ± 10% and typical low-power dissipation can reach 10 µA.

엔지니어링 참조 데이터: ATF22V10C-10PI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATF22V10C-10PI for compact logic designs that require a 10 ns 22V10-family device, electrically erasable Flash programming, and operation across the industrial 5 V ± 10% supply range. Select ATF22V10C-10PC when the same speed and PDIP footprint are wanted but the system remains within commercial-temperature requirements. Consider ATF22V10B-10PI for a related-generation 10 ns PDIP solution after checking fuse-map and programming differences. PALCE22V10-10DMB is another same-package candidate, but its programming method and electrical characteristics require direct comparison. For every alternative, verify pin compatibility, logic architecture, output timing, supply limits, temperature grade, and power-down behavior. The ATF22V10C-10PI is most appropriate when its Flash configuration flexibility and industrial operating specification align with the existing design.

대체품과의 비교

파라미터 이 제품 ATF22V10C-10PC ATF22V10B-10PI PALCE22V10-10DMB
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-pin PDIP 24-pin PDIP 24-pin PDIP 24-pin PDIP
Device Type 22V10 SPLD 22V10 SPLD 22V10 SPLD PALCE22V10 SPLD
Propagation Delay 10 ns 10 ns 10 ns 10 ns
Nominal Supply Voltage 5 V 5 V 5 V 5 V

주요 차별점

  • Industrial-temperature option within the ATF22V10C family (vs ATF22V10C-10PC)
  • Electrically erasable Flash configuration in the ATF22V10C architecture (vs ATF22V10B-10PI)
  • Direct 24-pin PDIP fit with a defined 10 ns speed grade (vs PALCE22V10-10DMB)

설계 노트

Treat a 22V10 replacement as a qualified device decision rather than a mechanical substitution. Compare the pin table, fuse map, output polarity, register configuration, propagation delay, supply range, and unused-pin requirements for the original and candidate parts. The ATF22V10C family is described as pin-to-pin and JEDEC fusemap compatible with GAL22V10, but minor AC and DC differences can still affect timing margins or unused-input behavior.

Design the 5 V supply around the appropriate temperature-grade tolerance. The manufacturer specifies 5 V ± 10% for military and industrial ranges and 5 V ± 5% for the commercial range. Include local supply decoupling close to the device and avoid long supply traces that could degrade switching thresholds. Review active and power-down current in the datasheet because the family’s typical low-power figure of 10 µA does not represent the current drawn while outputs are switching.

Use the 24-pin PDIP outline and pin numbering from the manufacturer package drawing when laying out the board. Keep the optional power-down connection at pin 4 in view during schematic review, and follow the datasheet requirements for unused inputs and outputs. For long external lines, add appropriate input conditioning and buffering; a 10 ns device can still produce incorrect system results when propagation, skew, or input thresholds are not included in the end-to-end timing budget.

Program and verify the device before inserting it into a high-value assembly. Electrically erasable Flash allows repeated configuration, but a wrong equation, output enable, or power-down setting can create misleading test results or unintended switching. Archive the programming file, record the device identifier, and perform a power-up test with external drivers disconnected. For production work, add a configuration checksum or programming-status check to the surrounding test process.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for the exact MPN.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

atf22v10c datasheet atf22v10c programming atf22v10c pinout atf22v10c programmable logic device ATF22V10C-10PI datasheet ATF22V10C-10PI pinout ATF22V10C-10PI equivalent ATF22V10C-10PI replacement ATF22V10C-10PI vs ATF22V10C-10PC ATF22V10C-10PI 24-pin PDIP ATF22V10C-10PI 10ns ATF22V10C-10PI price Microchip Technology ATF22V10C-10PI

관련 부품 & 용어

Microchip Technology ATF22V10C-10PI ATF22V10C ATF22V10C-10PC ATF22V10B-10PI PALCE22V10-10DMB simple programmable logic device SPLD programmable logic device electrically erasable Flash memory CMOS logic macrocell 500-gate logic 10 ns propagation delay 24-pin PDIP through-hole package 5 V power supply power-down pin logic decoding industrial control JEDEC fusemap Microchip datasheet doc0735
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기