ATSAME70N19B-CN - 300MHz Cortex-M7 512KB MCU | Microchip
MPN: ATSAME70N19B-CN ✓ 啟用中ATSAME70N19B-CN 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral controllers, and communication interfaces onto one device. The Cortex-M7 architecture belongs to the Arm embedded processor family, where the floating-point unit accelerates arithmetic operations used in control, signal processing, and communications. The ATSAME70 family combines this high-performance core with extensive analog, networking, and industrial peripherals.
Principal features include a maximum operating frequency of 300 MHz, 512 KB of flash memory organized as 512K x 8 bits, and 256 KB of SRAM. The integrated 12-bit analog-to-digital front end and 12-bit DAC support mixed-signal designs, while CAN-FD enables high-speed automotive or industrial network communication. The 100-TFBGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection.
The device belongs to Microchip's SAME70 family and uses the high-performance 32-bit Cortex-M7 processor with an FPU. Its combination of flash memory, SRAM, analog conversion, Ethernet-oriented connectivity, and CAN-FD makes it suitable for gateways, motor controllers, industrial communication nodes, data-acquisition equipment, and connected industrial systems. Operating at 300 MHz provides additional compute headroom for protocol processing, control loops, and real-time signal handling.
Typical applications include industrial Ethernet gateways, CAN-FD motor-control systems, precision data-acquisition units, building automation controllers, and embedded industrial communication equipment. The 12-bit AFE supports sensor measurement, while the 12-bit DAC enables analog output for control and excitation functions. The same high-bandwidth Cortex-M7 core can process network frames concurrently with deterministic control tasks when the firmware and interrupt architecture are designed accordingly.
PCB implementation should account for the fine-pitch 100-ball TFBGA geometry, ball pitch, and required escape routing. Follow the manufacturer's pinout, package drawing, and recommended land-pattern documentation for every board revision. Confirm the exact power, ground, decoupling, and exposed-ball requirements in the device documentation before releasing a production layout.
This page combines the manufacturer family details, distributor specifications, strict same-package replacement analysis, application guidance, and practical PCB considerations to support component selection and board design. It also distinguishes verified device characteristics from parameters that require confirmation against the complete manufacturer documentation.
直接替換替代品,適用於 ATSAME70N19B-CN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATSAME70N19B-CN (相同外形與佔位) — 差異在於 Package, Mounting Type, MSL Level, SRAM, ADC.
ATSAME70N19B-CNT
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70N20A-CNT
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70N21B-CNT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAME70N20B-CNT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAME70N21A-CNT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAME70N19B-CN 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Manufacturer | Microchip Technology |
| Maximum CPU Frequency | 300 MHz |
| CPU Architecture | 32-bit ARM Cortex-M7 with FPU |
| Internal Flash Memory | 512 KB (512K x 8 bits) |
| Internal SRAM | 256 KB |
| ADC Resolution | 12 bits |
| DAC Resolution | 12 bits |
| CAN-FD Support | Yes |
| 封裝 | 100-TFBGA (9 x 9 mm) |
| 安裝類型 | Surface mount |
| Packaging | Tray |
ATSAME70N19B-CN 100-tfbga (9 x 9 mm) 腳位配置指南
ATSAME70N19B-CN(100-tfbga (9 x 9 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATSAME70N19B-CN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAME70N19B-CN 適用於 6 應用s: Industrial Ethernet Gateway, CAN-FD Motor Controller, Precision Data Acquisition, Building Automation Controller, Embedded Network Appliance, Programmable Logic Controller.
Industrial Ethernet Gateway
The ATSAME70N19B-CN fits industrial gateway designs that combine high-speed network processing with real-time peripheral control. Its 300 MHz Arm Cortex-M7 processor provides compute headroom for protocol stacks, while 512 KB of internal flash and 256 KB of SRAM support firmware, buffers, and communication tables. The same core can service CAN-FD traffic alongside other device interfaces. The 100-TFBGA package reduces board area, but a dense multilayer PCB is required for clean power delivery and signal routing. Firmware should partition networking and control workloads, use deterministic interrupt priorities, and validate worst-case latency against the industrial protocol timing requirements.
推薦
CAN-FD Motor Controller
The ATSAME70N19B-CN is suitable for motor controllers requiring a fast control loop, analog measurement, and modern vehicle or industrial network communications. The 300 MHz Cortex-M7 core can execute control algorithms and service CAN-FD frames, while the 12-bit AFE supports precision analog acquisition and the 12-bit DAC provides an analog output channel. The 256 KB SRAM offers working memory for control state and communication buffers. Firmware design should isolate timing-critical control from non-deterministic tasks, verify AFE gain and acquisition timing, and calibrate the DAC output. Thermal and power performance must be evaluated across the actual motor-drive environment.
推薦
Precision Data Acquisition
The ATSAME70N19B-CN supports compact data-acquisition equipment that must combine sensor conditioning, digital processing, and network output in one controller. Its 12-bit AFE provides the analog measurement interface, while the 300 MHz Cortex-M7 processor can perform filtering, calibration, and real-time signal analysis. The 512 KB flash stores application firmware and configuration data, and 256 KB of SRAM accommodates acquisition buffers and working state. A practical implementation should characterize AFE noise, input bandwidth, and reference accuracy rather than infer them solely from resolution. Calibration tables, gain correction, and anti-alias filtering should be included to preserve measurement quality in a compact 100-TFBGA design.
推薦
Building Automation Controller
The ATSAME70N19B-CN can serve as the central controller in a building-automation node that monitors sensors, drives outputs, and communicates over an industrial network. Its 300 MHz Cortex-M7 core provides ample performance for protocol management, scheduling, diagnostics, and local control, while CAN-FD supports high-rate communication when the building network architecture uses that protocol. The 12-bit AFE can acquire environmental or occupancy-sensor signals, and the 12-bit DAC can provide analog control outputs. Firmware should use scheduled tasks and event-driven interrupts to manage energy use. The small 9 x 9 mm TFBGA package supports compact hardware, although thermal conditions inside wall-mounted equipment should be checked against the complete electrical specification.
推薦
Embedded Network Appliance
The ATSAME70N19B-CN is appropriate for embedded network appliances that require deterministic control alongside communication-processing capability. A 300 MHz Cortex-M7 core can manage CAN-FD frames, maintain protocol state, and execute supervisory logic, while 512 KB of flash and 256 KB of SRAM provide internal memory for firmware and packet buffers. The integrated 12-bit AFE and DAC also allow the product to incorporate local monitoring and analog output functions without requiring separate converters in every design. Production firmware should include watchdog recovery, secure boot provisions, and controlled firmware updates. Board layout must provide clean supply rails and short return paths because high-speed digital activity and analog inputs share the same fine-pitch package.
推薦
Programmable Logic Controller
The ATSAME70N19B-CN can support compact PLC modules that combine deterministic I/O control, analog measurement, communications, and diagnostics. Its 300 MHz Cortex-M7 processor has substantially more single-thread compute headroom than typical low-end 8-bit or 100 MHz-class controllers, while the 512 KB flash and 256 KB SRAM accommodate logic tasks, configuration, and communication state. The 12-bit AFE is suitable for sensor inputs, and CAN-FD can connect the module to higher-speed industrial networks. Design work should define scan-cycle timing, interrupt priorities, and safe output states before implementation. Because the package is 100-TFBGA, manufacturing inspection, assembly profile, and land-pattern validation are important production considerations.
推薦
推薦產品摘要
工程參考資料,適用於 ATSAME70N19B-CN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAME70N19B-CNT | ATSAME70N20A-CNT | ATSAME70N21B-CNT | ATSAME70N20B-CNT | ATSAME70N21A-CNT |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Core | Arm Cortex-M7 with FPU | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
主要差異化特點
- Lower SRAM configuration provides a distinct memory target (對比ATSAME70N20A-CNT)
- Direct ATSAME70N19B family configuration (對比ATSAME70N19B-CNT)
- Integrated mixed-signal resources (對比ATSAME70N20A-CNT)
設計說明
Design the PCB around the official 100-TFBGA land pattern rather than a generic BGA footprint. Confirm ball pitch, pad dimensions, solder-mask definition, paste apertures, and assembly inspection requirements from the manufacturer package drawing. Route high-speed interfaces on short, continuous paths, place decoupling capacitors close to their supply balls, and provide an uninterrupted ground return beneath the device where the recommended stack-up permits it.
Separate analog inputs from digital switching activity as far as the package and board architecture allow. Keep AFE reference, sensor, and DAC routing away from high-current switching nodes and noisy clock or interface traces. Use a continuous ground plane, avoid splits beneath analog routes, and follow the manufacturer's analog-layout guidance. A 12-bit converter can provide useful accuracy, but layout and reference-noise errors can still dominate the final measurement performance.
Partition the supply network so the Cortex-M7 core and switching peripherals receive low-impedance decoupling while sensitive analog sections use appropriately filtered sources. Verify the required operating voltage range, current limits, startup sequence, and decoupling values in the complete manufacturer documentation before schematic release. Validate droop and noise at the device pins with representative load transients because nominal rail voltage alone does not establish performance.
Do not treat the SAME70 family identifiers as automatically interchangeable. ATSAME70N19B-CN has 256 KB SRAM, while ATSAME70N20A-CNT is listed with 384 KB SRAM, and other family members may differ in peripherals, pin multiplexing, or device configuration. Before substituting a part, compare the ball map, electrical limits, peripheral matrix, memory map, boot behavior, package drawing, and existing firmware dependencies.
Estimate junction temperature from actual power loss and the thermal path of the specific PCB stack-up rather than relying on a generic package value. The 300 MHz Cortex-M7 can consume additional power during intensive computation, while 12-bit AFE and CAN-FD activity add load. Use the manufacturer thermal model and measured board conditions for final validation, especially in sealed industrial or vehicle-mounted equipment with restricted airflow.
合規資訊
Compliance status was not stated in the verified product excerpts and must be confirmed through the manufacturer product documentation for the exact ordering code.