ATSAME70N19B-CN - 300MHz Cortex-M7 512KB MCU | Microchip
MPN: ATSAME70N19B-CN ✓ نشطATSAME70N19B-CN نظرة عامة
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral controllers, and communication interfaces onto one device. The Cortex-M7 architecture belongs to the Arm embedded processor family, where the floating-point unit accelerates arithmetic operations used in control, signal processing, and communications. The ATSAME70 family combines this high-performance core with extensive analog, networking, and industrial peripherals.
Principal features include a maximum operating frequency of 300 MHz, 512 KB of flash memory organized as 512K x 8 bits, and 256 KB of SRAM. The integrated 12-bit analog-to-digital front end and 12-bit DAC support mixed-signal designs, while CAN-FD enables high-speed automotive or industrial network communication. The 100-TFBGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection.
The device belongs to Microchip's SAME70 family and uses the high-performance 32-bit Cortex-M7 processor with an FPU. Its combination of flash memory, SRAM, analog conversion, Ethernet-oriented connectivity, and CAN-FD makes it suitable for gateways, motor controllers, industrial communication nodes, data-acquisition equipment, and connected industrial systems. Operating at 300 MHz provides additional compute headroom for protocol processing, control loops, and real-time signal handling.
Typical applications include industrial Ethernet gateways, CAN-FD motor-control systems, precision data-acquisition units, building automation controllers, and embedded industrial communication equipment. The 12-bit AFE supports sensor measurement, while the 12-bit DAC enables analog output for control and excitation functions. The same high-bandwidth Cortex-M7 core can process network frames concurrently with deterministic control tasks when the firmware and interrupt architecture are designed accordingly.
PCB implementation should account for the fine-pitch 100-ball TFBGA geometry, ball pitch, and required escape routing. Follow the manufacturer's pinout, package drawing, and recommended land-pattern documentation for every board revision. Confirm the exact power, ground, decoupling, and exposed-ball requirements in the device documentation before releasing a production layout.
This page combines the manufacturer family details, distributor specifications, strict same-package replacement analysis, application guidance, and practical PCB considerations to support component selection and board design. It also distinguishes verified device characteristics from parameters that require confirmation against the complete manufacturer documentation.
بدائل مباشرة لـ ATSAME70N19B-CN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ATSAME70N19B-CN (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, MSL Level, SRAM, ADC.
ATSAME70N19B-CNT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70N20A-CNT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70N21B-CNT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70N20B-CNT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70N21A-CNT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70N19B-CN الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Manufacturer | Microchip Technology |
| Maximum CPU Frequency | 300 MHz |
| CPU Architecture | 32-bit ARM Cortex-M7 with FPU |
| Internal Flash Memory | 512 KB (512K x 8 bits) |
| Internal SRAM | 256 KB |
| ADC Resolution | 12 bits |
| DAC Resolution | 12 bits |
| CAN-FD Support | Yes |
| العلبة | 100-TFBGA (9 x 9 mm) |
| نوع التركيب | Surface mount |
| Packaging | Tray |
دليل تكوين أطراف ATSAME70N19B-CN 100-tfbga (9 x 9 mm)
تكوين الأطراف لـ ATSAME70N19B-CN (حزمة 100-tfbga (9 x 9 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATSAME70N19B-CN.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATSAME70N19B-CN مناسب لـ 6 التطبيقs: Industrial Ethernet Gateway, CAN-FD Motor Controller, Precision Data Acquisition, Building Automation Controller, Embedded Network Appliance, Programmable Logic Controller.
Industrial Ethernet Gateway
The ATSAME70N19B-CN fits industrial gateway designs that combine high-speed network processing with real-time peripheral control. Its 300 MHz Arm Cortex-M7 processor provides compute headroom for protocol stacks, while 512 KB of internal flash and 256 KB of SRAM support firmware, buffers, and communication tables. The same core can service CAN-FD traffic alongside other device interfaces. The 100-TFBGA package reduces board area, but a dense multilayer PCB is required for clean power delivery and signal routing. Firmware should partition networking and control workloads, use deterministic interrupt priorities, and validate worst-case latency against the industrial protocol timing requirements.
موصى به
CAN-FD Motor Controller
The ATSAME70N19B-CN is suitable for motor controllers requiring a fast control loop, analog measurement, and modern vehicle or industrial network communications. The 300 MHz Cortex-M7 core can execute control algorithms and service CAN-FD frames, while the 12-bit AFE supports precision analog acquisition and the 12-bit DAC provides an analog output channel. The 256 KB SRAM offers working memory for control state and communication buffers. Firmware design should isolate timing-critical control from non-deterministic tasks, verify AFE gain and acquisition timing, and calibrate the DAC output. Thermal and power performance must be evaluated across the actual motor-drive environment.
موصى به
Precision Data Acquisition
The ATSAME70N19B-CN supports compact data-acquisition equipment that must combine sensor conditioning, digital processing, and network output in one controller. Its 12-bit AFE provides the analog measurement interface, while the 300 MHz Cortex-M7 processor can perform filtering, calibration, and real-time signal analysis. The 512 KB flash stores application firmware and configuration data, and 256 KB of SRAM accommodates acquisition buffers and working state. A practical implementation should characterize AFE noise, input bandwidth, and reference accuracy rather than infer them solely from resolution. Calibration tables, gain correction, and anti-alias filtering should be included to preserve measurement quality in a compact 100-TFBGA design.
موصى به
Building Automation Controller
The ATSAME70N19B-CN can serve as the central controller in a building-automation node that monitors sensors, drives outputs, and communicates over an industrial network. Its 300 MHz Cortex-M7 core provides ample performance for protocol management, scheduling, diagnostics, and local control, while CAN-FD supports high-rate communication when the building network architecture uses that protocol. The 12-bit AFE can acquire environmental or occupancy-sensor signals, and the 12-bit DAC can provide analog control outputs. Firmware should use scheduled tasks and event-driven interrupts to manage energy use. The small 9 x 9 mm TFBGA package supports compact hardware, although thermal conditions inside wall-mounted equipment should be checked against the complete electrical specification.
موصى به
Embedded Network Appliance
The ATSAME70N19B-CN is appropriate for embedded network appliances that require deterministic control alongside communication-processing capability. A 300 MHz Cortex-M7 core can manage CAN-FD frames, maintain protocol state, and execute supervisory logic, while 512 KB of flash and 256 KB of SRAM provide internal memory for firmware and packet buffers. The integrated 12-bit AFE and DAC also allow the product to incorporate local monitoring and analog output functions without requiring separate converters in every design. Production firmware should include watchdog recovery, secure boot provisions, and controlled firmware updates. Board layout must provide clean supply rails and short return paths because high-speed digital activity and analog inputs share the same fine-pitch package.
موصى به
Programmable Logic Controller
The ATSAME70N19B-CN can support compact PLC modules that combine deterministic I/O control, analog measurement, communications, and diagnostics. Its 300 MHz Cortex-M7 processor has substantially more single-thread compute headroom than typical low-end 8-bit or 100 MHz-class controllers, while the 512 KB flash and 256 KB SRAM accommodate logic tasks, configuration, and communication state. The 12-bit AFE is suitable for sensor inputs, and CAN-FD can connect the module to higher-speed industrial networks. Design work should define scan-cycle timing, interrupt priorities, and safe output states before implementation. Because the package is 100-TFBGA, manufacturing inspection, assembly profile, and land-pattern validation are important production considerations.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATSAME70N19B-CN — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATSAME70N19B-CNT | ATSAME70N20A-CNT | ATSAME70N21B-CNT | ATSAME70N20B-CNT | ATSAME70N21A-CNT |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Core | Arm Cortex-M7 with FPU | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
أبرز الفروقات
- Lower SRAM configuration provides a distinct memory target (مقابلATSAME70N20A-CNT)
- Direct ATSAME70N19B family configuration (مقابلATSAME70N19B-CNT)
- Integrated mixed-signal resources (مقابلATSAME70N20A-CNT)
ملاحظات التصميم
Design the PCB around the official 100-TFBGA land pattern rather than a generic BGA footprint. Confirm ball pitch, pad dimensions, solder-mask definition, paste apertures, and assembly inspection requirements from the manufacturer package drawing. Route high-speed interfaces on short, continuous paths, place decoupling capacitors close to their supply balls, and provide an uninterrupted ground return beneath the device where the recommended stack-up permits it.
Separate analog inputs from digital switching activity as far as the package and board architecture allow. Keep AFE reference, sensor, and DAC routing away from high-current switching nodes and noisy clock or interface traces. Use a continuous ground plane, avoid splits beneath analog routes, and follow the manufacturer's analog-layout guidance. A 12-bit converter can provide useful accuracy, but layout and reference-noise errors can still dominate the final measurement performance.
Partition the supply network so the Cortex-M7 core and switching peripherals receive low-impedance decoupling while sensitive analog sections use appropriately filtered sources. Verify the required operating voltage range, current limits, startup sequence, and decoupling values in the complete manufacturer documentation before schematic release. Validate droop and noise at the device pins with representative load transients because nominal rail voltage alone does not establish performance.
Do not treat the SAME70 family identifiers as automatically interchangeable. ATSAME70N19B-CN has 256 KB SRAM, while ATSAME70N20A-CNT is listed with 384 KB SRAM, and other family members may differ in peripherals, pin multiplexing, or device configuration. Before substituting a part, compare the ball map, electrical limits, peripheral matrix, memory map, boot behavior, package drawing, and existing firmware dependencies.
Estimate junction temperature from actual power loss and the thermal path of the specific PCB stack-up rather than relying on a generic package value. The 300 MHz Cortex-M7 can consume additional power during intensive computation, while 12-bit AFE and CAN-FD activity add load. Use the manufacturer thermal model and measured board conditions for final validation, especially in sealed industrial or vehicle-mounted equipment with restricted airflow.
معلومات الامتثال
Compliance status was not stated in the verified product excerpts and must be confirmed through the manufacturer product documentation for the exact ordering code.