Microchip Technology

ATSAME70N19B-CN - 300MHz Cortex-M7 512KB MCU | Microchip

Teilenummer: ATSAME70N19B-CN ✓ Aktiv
100-TFBGA (9 x 9 mm) Package 300 MHz Speed 512 KB (512K x 8 bits) Memory
MOQ: 1 |

ATSAME70N19B-CN Übersicht

The Microchip Technology ATSAME70N19B-CN is a high-performance 32-bit ARM Cortex-M7 microcontroller operating up to 300 MHz, with 512 KB of internal flash and 256 KB of SRAM, in a compact 100-TFBGA 9 x 9 mm package. It combines an embedded floating-point unit, 12-bit AFE, 12-bit DAC, and CAN-FD support in an industrial embedded-processing platform.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral controllers, and communication interfaces onto one device. The Cortex-M7 architecture belongs to the Arm embedded processor family, where the floating-point unit accelerates arithmetic operations used in control, signal processing, and communications. The ATSAME70 family combines this high-performance core with extensive analog, networking, and industrial peripherals.

Principal features include a maximum operating frequency of 300 MHz, 512 KB of flash memory organized as 512K x 8 bits, and 256 KB of SRAM. The integrated 12-bit analog-to-digital front end and 12-bit DAC support mixed-signal designs, while CAN-FD enables high-speed automotive or industrial network communication. The 100-TFBGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection.

The device belongs to Microchip's SAME70 family and uses the high-performance 32-bit Cortex-M7 processor with an FPU. Its combination of flash memory, SRAM, analog conversion, Ethernet-oriented connectivity, and CAN-FD makes it suitable for gateways, motor controllers, industrial communication nodes, data-acquisition equipment, and connected industrial systems. Operating at 300 MHz provides additional compute headroom for protocol processing, control loops, and real-time signal handling.

Typical applications include industrial Ethernet gateways, CAN-FD motor-control systems, precision data-acquisition units, building automation controllers, and embedded industrial communication equipment. The 12-bit AFE supports sensor measurement, while the 12-bit DAC enables analog output for control and excitation functions. The same high-bandwidth Cortex-M7 core can process network frames concurrently with deterministic control tasks when the firmware and interrupt architecture are designed accordingly.

PCB implementation should account for the fine-pitch 100-ball TFBGA geometry, ball pitch, and required escape routing. Follow the manufacturer's pinout, package drawing, and recommended land-pattern documentation for every board revision. Confirm the exact power, ground, decoupling, and exposed-ball requirements in the device documentation before releasing a production layout.

This page combines the manufacturer family details, distributor specifications, strict same-package replacement analysis, application guidance, and practical PCB considerations to support component selection and board design. It also distinguishes verified device characteristics from parameters that require confirmation against the complete manufacturer documentation.

Drop-in-Alternativen für ATSAME70N19B-CN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAME70N19B-CN (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, MSL Level, SRAM, ADC.

Microchip Technology
Package: 100-LQFP (14x14 mm)
MSL Level: 3 (168 hours)
SRAM: 256 KB
Vergleichen mit ATSAME70N19B-CN →
Microchip Technology
Package: 100-TFBGA (9x9 mm)
MSL Level: 3 (per BGA)
SRAM: 256 KB
Vergleichen mit ATSAME70N19B-CN →
Microchip Technology
Package: 100-pin TFBGA (9x9 mm)
Mounting Type: Surface Mount (Tape & Reel, CNT suffix)
MSL Level: 3 (168 hours)
Vergleichen mit ATSAME70N19B-CN →
Microchip Technology
Package: 100-pin TFBGA (9x9 mm)
MSL Level: 3 (per JEDEC J-STD-020)
Vergleichen mit ATSAME70N19B-CN →
Microchip Technology
Package: 100-pin TFBGA, 9x9 mm, 0.8 mm pitch
Mounting Type: Surface Mount (BGA)
MSL Level: 3 (168 hours)
Vergleichen mit ATSAME70N19B-CN →
Microchip Technology
Package: 100-pin TFBGA (9x9 mm)
SRAM: 384 KB multi-port
ADC: 12-bit, up to 2 Msps
Vergleichen mit ATSAME70N19B-CN →

ATSAME70N19B-CNT

✅ Drop-In
Microchip Technology
📦 100-TFBGA (9 x 9 mm)
ARM Cortex-M7 with FPU · 300 MHz · 512 KB (512K x 8) · 256 KB · 32-bit · Single-core · 100-TFBGA (9x9 mm) · Surface Mount

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70N20A-CNT

✅ Drop-In
Microchip Technology
📦 100-TFBGA (9 x 9 mm)
ARM Cortex-M7 with FPU (single + double precision) · 300 MHz · 1500 CoreMark / 600 DMIPS · 1024 KB (1 MB) · 384 KB · 16 KB · 16 KB · Yes (ITCM + DTCM)

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70N21B-CNT

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 100-TFBGA (9 x 9 mm)
ARM Cortex-M7 with FPU · 300 MHz · 2 MB (2048 KB) · 384 KB multi-port · 16 KB · 16 KB · 100-pin TFBGA (9x9 mm) · 1.62 V to 3.6 V

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70N20B-CNT

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 100-TFBGA (9 x 9 mm)
ARM Cortex-M7 with FPU · 300 MHz · 1 MB (1024 Kbytes) Flash · 384 KB SRAM (multi-port) · 32-bit · 1.08 V to 3.6 V · -40C to +85C (industrial) · 100-pin TFBGA (9x9 mm)

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70N21A-CNT

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 100-TFBGA (9 x 9 mm)
ARM Cortex-M7 with FPU (single + double precision) · 300 MHz · 2 MB (2048 KB) · 384 KB · 16 KB · 16 KB · 1500 (typical) · 3.3 V (typical); 1.2 V core

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70N19B-CN Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ARM Cortex-M7 flash microcontroller
Manufacturer Microchip Technology
Maximum CPU Frequency 300 MHz
CPU Architecture 32-bit ARM Cortex-M7 with FPU
Internal Flash Memory 512 KB (512K x 8 bits)
Internal SRAM 256 KB
ADC Resolution 12 bits
DAC Resolution 12 bits
CAN-FD Support Yes
Gehäuse 100-TFBGA (9 x 9 mm)
Montageart Surface mount
Packaging Tray

ATSAME70N19B-CN 100-tfbga (9 x 9 mm) Pinbelegungsleitfaden

Pinbelegung für ATSAME70N19B-CN (100-tfbga (9 x 9 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATSAME70N19B-CN im 100-tfbga (9 x 9 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATSAME70N19B-CN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATSAME70N19B-CN ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, CAN-FD Motor Controller, Precision Data Acquisition, Building Automation Controller, Embedded Network Appliance, Programmable Logic Controller.

🏭

Industrial Ethernet Gateway

The ATSAME70N19B-CN fits industrial gateway designs that combine high-speed network processing with real-time peripheral control. Its 300 MHz Arm Cortex-M7 processor provides compute headroom for protocol stacks, while 512 KB of internal flash and 256 KB of SRAM support firmware, buffers, and communication tables. The same core can service CAN-FD traffic alongside other device interfaces. The 100-TFBGA package reduces board area, but a dense multilayer PCB is required for clean power delivery and signal routing. Firmware should partition networking and control workloads, use deterministic interrupt priorities, and validate worst-case latency against the industrial protocol timing requirements.

🚗

CAN-FD Motor Controller

The ATSAME70N19B-CN is suitable for motor controllers requiring a fast control loop, analog measurement, and modern vehicle or industrial network communications. The 300 MHz Cortex-M7 core can execute control algorithms and service CAN-FD frames, while the 12-bit AFE supports precision analog acquisition and the 12-bit DAC provides an analog output channel. The 256 KB SRAM offers working memory for control state and communication buffers. Firmware design should isolate timing-critical control from non-deterministic tasks, verify AFE gain and acquisition timing, and calibrate the DAC output. Thermal and power performance must be evaluated across the actual motor-drive environment.

📊

Precision Data Acquisition

The ATSAME70N19B-CN supports compact data-acquisition equipment that must combine sensor conditioning, digital processing, and network output in one controller. Its 12-bit AFE provides the analog measurement interface, while the 300 MHz Cortex-M7 processor can perform filtering, calibration, and real-time signal analysis. The 512 KB flash stores application firmware and configuration data, and 256 KB of SRAM accommodates acquisition buffers and working state. A practical implementation should characterize AFE noise, input bandwidth, and reference accuracy rather than infer them solely from resolution. Calibration tables, gain correction, and anti-alias filtering should be included to preserve measurement quality in a compact 100-TFBGA design.

🧩

Building Automation Controller

The ATSAME70N19B-CN can serve as the central controller in a building-automation node that monitors sensors, drives outputs, and communicates over an industrial network. Its 300 MHz Cortex-M7 core provides ample performance for protocol management, scheduling, diagnostics, and local control, while CAN-FD supports high-rate communication when the building network architecture uses that protocol. The 12-bit AFE can acquire environmental or occupancy-sensor signals, and the 12-bit DAC can provide analog control outputs. Firmware should use scheduled tasks and event-driven interrupts to manage energy use. The small 9 x 9 mm TFBGA package supports compact hardware, although thermal conditions inside wall-mounted equipment should be checked against the complete electrical specification.

🌐

Embedded Network Appliance

The ATSAME70N19B-CN is appropriate for embedded network appliances that require deterministic control alongside communication-processing capability. A 300 MHz Cortex-M7 core can manage CAN-FD frames, maintain protocol state, and execute supervisory logic, while 512 KB of flash and 256 KB of SRAM provide internal memory for firmware and packet buffers. The integrated 12-bit AFE and DAC also allow the product to incorporate local monitoring and analog output functions without requiring separate converters in every design. Production firmware should include watchdog recovery, secure boot provisions, and controlled firmware updates. Board layout must provide clean supply rails and short return paths because high-speed digital activity and analog inputs share the same fine-pitch package.

⚡

Programmable Logic Controller

The ATSAME70N19B-CN can support compact PLC modules that combine deterministic I/O control, analog measurement, communications, and diagnostics. Its 300 MHz Cortex-M7 processor has substantially more single-thread compute headroom than typical low-end 8-bit or 100 MHz-class controllers, while the 512 KB flash and 256 KB SRAM accommodate logic tasks, configuration, and communication state. The 12-bit AFE is suitable for sensor inputs, and CAN-FD can connect the module to higher-speed industrial networks. Design work should define scan-cycle timing, interrupt priorities, and safe output states before implementation. Because the package is 100-TFBGA, manufacturing inspection, assembly profile, and land-pattern validation are important production considerations.

Where to buy ATSAME70N19B-CN online?
The ATSAME70N19B-CN can be requested through the Request a Quote form on this page. The exact Microchip part number includes the 100-TFBGA package and tray-packaging designation, so confirm the complete suffix before placing an order. The manufacturer identifies the device as a 300 MHz Cortex-M7 microcontroller with 512 KB of flash and 256 KB of SRAM.
What is the price of ATSAME70N19B-CN?
The current unit price is not displayed statically because it can change with quantity, availability, and sourcing conditions. Use the Request a Quote form on this page for the ATSAME70N19B-CN and the required quantity. The component is a 100-TFBGA device with 512 KB of flash, 256 KB of SRAM, and a 300 MHz Cortex-M7 core.
What is the lead time for ATSAME70N19B-CN?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the requested quantity and current channel inventory, so it should be confirmed for the exact ATSAME70N19B-CN suffix rather than assumed from the broader SAME70 family. This ordering code specifies a 100-TFBGA package in tray packaging.
Is ATSAME70N19B-CN in stock?
Current stock status should be confirmed through the Request a Quote form on this page because inventory can change after a quote is prepared. The verified manufacturer and distributor records identify ATSAME70N19B-CN as a 300 MHz, 512 KB-flash Cortex-M7 microcontroller in a 100-TFBGA package, allowing purchasing staff to request an exact-match update.
What is the ATSAME70N19B-CN vs ATSAME70N20A-CNT difference?
The principal documented difference is SRAM capacity: ATSAME70N19B-CN has 256 KB, while ATSAME70N20A-CNT has 384 KB. Both devices use the Cortex-M7 core, support operation up to 300 MHz, and are listed in the 100-TFBGA package family. The higher SRAM in the N20A can benefit concurrent buffering, while the N19B may be preferable where memory capacity is sufficient.
What is the difference between ATSAME70N19B-CN and ATSAME70N21B-CN?
Both ATSAME70N19B-CN and ATSAME70N21B-CN are identified as Microchip SAME70 Cortex-M7 devices with a maximum speed of 300 MHz and a 100-TFBGA package. Their exact peripheral and memory differences must be checked in the manufacturer comparison data before substitution. The N19B has 256 KB SRAM, while the precise N21B memory configuration requires confirmation.
When should I choose ATSAME70N19B-CN over ATSAME70N20A-CNT?
Choose ATSAME70N19B-CN when 256 KB of SRAM is sufficient and the design requires the exact ATSAME70N19B-CN configuration. Choose ATSAME70N20A-CNT when its documented 384 KB SRAM provides useful additional working memory. Both provide a 300 MHz Cortex-M7 core and use the 100-TFBGA package, but firmware, peripheral, and pin-level requirements still require validation.
Is ATSAME70N19B-CN suitable for industrial motor control?
The ATSAME70N19B-CN is suitable for many industrial motor-control designs because it combines a 300 MHz Cortex-M7 processor, 12-bit AFE, 12-bit DAC, and CAN-FD support. The AFE can acquire current or position-related signals, while CAN-FD supports robust network communication. Exact analog limits, timing, and safety requirements must be checked against the complete manufacturer documentation.
What is the best drop-in replacement for ATSAME70N19B-CN?
The closest documented drop-in candidate is ATSAME70N19B-CNT because it retains the ATSAME70N19B configuration and 100-TFBGA package while changing the ordering or packaging code. Compatibility still requires verification of pin functions, electrical limits, and firmware support. ATSAME70N20A-CNT and ATSAME70N21B-CN are same-package family alternatives but differ in memory or device configuration.
Can ATSAME70N20A-CNT replace ATSAME70N19B-CN?
ATSAME70N20A-CNT can be considered for a same-package redesign because it uses the 100-TFBGA package, retains the 300 MHz Cortex-M7 core, and provides 384 KB SRAM versus 256 KB in ATSAME70N19B-CN. It should not be treated as an automatic replacement until pin multiplexing, peripheral configuration, memory mapping, and firmware support have been checked against the manufacturer documentation.
What can replace ATSAME70N19B-CN?
ATSAME70N19B-CNT is the most direct same-family replacement candidate because both are 100-TFBGA ATSAME70N19B devices with a 300 MHz Cortex-M7 core and 512 KB of flash. ATSAME70N20A-CNT and ATSAME70N21B-CN can support a planned family migration, but their memory or configuration differences require board and firmware review rather than a blind substitution.
Is ATSAME70N19B-CN the same as ATSAME70N21B-CN?
No. Although ATSAME70N19B-CN and ATSAME70N21B-CN share the SAME70 family, Cortex-M7 architecture, 300 MHz maximum speed, and 100-TFBGA package format, the N19B and N21B device identifiers denote different configurations. ATSAME70N19B-CN has 256 KB SRAM, while the N21B configuration requires a detailed manufacturer datasheet comparison.
Where to download the ATSAME70N19B-CN datasheet PDF?
The ATSAME70N19B-CN documentation is available through the Microchip SAME70N19 product page at https://www.microchip.com/en-us/product/ATSAME70N19. Use the manufacturer datasheet, package drawing, and pin-description material to confirm electrical limits, ball assignments, programming requirements, and the exact 100-TFBGA land pattern.
Where can I find the ATSAME70N19B-CN pinout?
Find the ATSAME70N19B-CN pinout and 100-ball TFBGA assignments through the Microchip SAME70N19 product page and the associated manufacturer package documentation. The verified product data confirms a 100-TFBGA package, but individual ball names and no-connect positions are not published in the search excerpts. Do not infer a complete footprint without the official pin-description table.
What are the key specifications of ATSAME70N19B-CN that engineers should know?
ATSAME70N19B-CN is a Microchip SAME70 microcontroller built around a 32-bit Arm Cortex-M7 processor with FPU, operating up to 300 MHz. It integrates 512 KB of flash, 256 KB of SRAM, a 12-bit AFE, a 12-bit DAC, and CAN-FD support. The package is a compact 100-TFBGA measuring 9 x 9 mm and is supplied in tray packaging.

Technische Referenzdaten für ATSAME70N19B-CN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ATSAME70N19B-CN when the exact ATSAME70N19B configuration, 256 KB of SRAM, 512 KB of flash, 12-bit AFE, 12-bit DAC, and CAN-FD support align with the product architecture. It is a strong fit for compact industrial controllers, CAN-FD motor systems, data-acquisition units, and embedded gateways that benefit from a 300 MHz Cortex-M7 core. Select ATSAME70N19B-CNT for the closest ordering-code alternative after confirming packaging and supply requirements. Consider ATSAME70N20A-CNT when its documented 384 KB SRAM materially improves buffering or concurrent workload capacity, while recognizing that firmware and peripheral assumptions must be reviewed. ATSAME70N21B-CNT, ATSAME70N20B-CNT, and ATSAME70N21A-CNT are same-package family candidates for planned migrations, but exact memory, pin, and peripheral differences require confirmation before substitution. Avoid choosing any alternative solely from the shared TFBGA outline; verify the official ball map, electrical characteristics, peripheral matrix, and firmware requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt ATSAME70N19B-CNT ATSAME70N20A-CNT ATSAME70N21B-CNT ATSAME70N20B-CNT ATSAME70N21A-CNT
Package 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Core Arm Cortex-M7 with FPU Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7
Maximum CPU Frequency 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz

Wichtigste Unterscheidungsmerkmale

  • Lower SRAM configuration provides a distinct memory target (vs. ATSAME70N20A-CNT)
  • Direct ATSAME70N19B family configuration (vs. ATSAME70N19B-CNT)
  • Integrated mixed-signal resources (vs. ATSAME70N20A-CNT)

Designhinweise

Design the PCB around the official 100-TFBGA land pattern rather than a generic BGA footprint. Confirm ball pitch, pad dimensions, solder-mask definition, paste apertures, and assembly inspection requirements from the manufacturer package drawing. Route high-speed interfaces on short, continuous paths, place decoupling capacitors close to their supply balls, and provide an uninterrupted ground return beneath the device where the recommended stack-up permits it.

Separate analog inputs from digital switching activity as far as the package and board architecture allow. Keep AFE reference, sensor, and DAC routing away from high-current switching nodes and noisy clock or interface traces. Use a continuous ground plane, avoid splits beneath analog routes, and follow the manufacturer's analog-layout guidance. A 12-bit converter can provide useful accuracy, but layout and reference-noise errors can still dominate the final measurement performance.

Partition the supply network so the Cortex-M7 core and switching peripherals receive low-impedance decoupling while sensitive analog sections use appropriately filtered sources. Verify the required operating voltage range, current limits, startup sequence, and decoupling values in the complete manufacturer documentation before schematic release. Validate droop and noise at the device pins with representative load transients because nominal rail voltage alone does not establish performance.

Do not treat the SAME70 family identifiers as automatically interchangeable. ATSAME70N19B-CN has 256 KB SRAM, while ATSAME70N20A-CNT is listed with 384 KB SRAM, and other family members may differ in peripherals, pin multiplexing, or device configuration. Before substituting a part, compare the ball map, electrical limits, peripheral matrix, memory map, boot behavior, package drawing, and existing firmware dependencies.

Estimate junction temperature from actual power loss and the thermal path of the specific PCB stack-up rather than relying on a generic package value. The 300 MHz Cortex-M7 can consume additional power during intensive computation, while 12-bit AFE and CAN-FD activity add load. Use the manufacturer thermal model and measured board conditions for final validation, especially in sealed industrial or vehicle-mounted equipment with restricted airflow.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status was not stated in the verified product excerpts and must be confirmed through the manufacturer product documentation for the exact ordering code.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ATSAME70N19B-CN datasheet ATSAME70N19B-CN pinout ATSAME70N19B-CN datasheet pdf ATSAME70N19B-CN specifications ATSAME70N19B-CN 100-TFBGA ATSAME70N19B-CN replacement ATSAME70N19B-CN equivalent ATSAME70N19B-CN vs ATSAME70N20A-CNT ATSAME70N19B-CN price ATSAME70N19B-CN stock Microchip ATSAME70N19B-CN ATSAME70N19B-CN CAN-FD controller ATSAME70N19B-CN industrial application ATSAME70N19B-CN Cortex-M7 microcontroller

Verwandte Bauteile & Begriffe

Microchip Technology ATSAME70N19B-CN ATSAME70N19B-CNT ATSAME70N20A-CNT ATSAME70N21B-CNT ATSAME70N20B-CNT ATSAME70N21A-CNT SAME70 ARM Cortex-M7 ARM Cortex-M7 processor Floating Point Unit microcontroller 32-bit embedded processor flash memory SRAM 12-bit AFE 12-bit DAC CAN-FD 100-TFBGA BGA family surface-mount package industrial control motor control data acquisition
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen