ATSAME70N21A-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
MPN： ATSAME70N21A-AN ✓ 啟用中ATSAME70N21A-AN 概覽
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals on a single silicon die. The ATSAME70N21A-AN belongs to the broader category of embedded microcontrollers (sub-class: 32-bit ARM Cortex-M7 MCUs), which sit within embedded processors > semiconductors > integrated circuits. ARM Cortex-M7 cores are specifically designed for deterministic microcontrollers with high computational throughput, DSP extensions, and tight interrupt latency, differentiating them from Cortex-M4 (which lacks the M7's dual-issue pipeline and TCM interfaces) and Cortex-A application processors (which target Linux-capable application processing). The SAM E70 series from Microchip/Atmel targets industrial connectivity, motor control, audio processing, and graphical HMI applications where designers need DSP-class math, fast context switching, and Ethernet/USB connectivity.
Key specifications include a maximum CPU clock of 300 MHz with a double-precision FPU, IEEE 754-compliant single-precision FPU, 16 KB I-cache and 16 KB D-cache, and tightly-coupled memory (TCM) interfaces for low-latency deterministic code execution. The integrated 2 MB dual-bank Flash supports in-application programming, while 384 KB SRAM supports high-bandwidth DSP and graphics frame buffers. Communication peripherals include a 10/100 Mbps Ethernet MAC with 1588 PTP support, USB 2.0 Full-Speed + Hi-Speed with on-chip PHY, CAN-FD, and multiple USART/SPI/TWI/I2S blocks.
The ATSAME70N21A-AN is built on a low-leakage process and operates from a 1.62 V to 3.6 V supply range, with separate VDDIO and VDDCORE rails allowing flexible I/O voltage scaling. Internal 8/16/32-bit timers, a 12-bit ADC up to 1.5 Msps, and a hardware crypto accelerator via the same AES engine are integrated for motor-control and secure-boot use cases. The architecture is supported by the SAME70 Xplained Pro board and Atmel Studio/Microchip Studio, plus the MPLAB Harmony 3 software framework for RTOS, USB stacks, and middleware integration.
Typical applications include industrial motor drives (FOC for PMSM/BLDC), factory automation PLCs, automotive telematics (non-AEC-Q100 variants), medical instrumentation, audio processing via I2S, and graphical HMI displays. The integrated Ethernet MAC with 1588 timestamping also makes it well-suited for industrial IoT gateways and synchronized sensor networks.
直接替換替代品，適用於 ATSAME70N21A-AN — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： ATSAME70N21A-AN （相同外形與佔位） — 差異在於 ADC, Package, Program Memory (Flash), Operating Temperature, USB.
ATSAME70N19B-AN
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70N20A-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70N21B-AN
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAME70N21A-ANR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
STM32F767VIT6
✅ 直接替換聯絡詢價
查看資料表 →MK64FN1M0VDC12
✅ 直接替換📋 參考替代品（不在目錄中）
ATSAME70N21A-AN 最大額定值與電氣特性
| Core | ARM Cortex-M7 with FPU |
| CPU Architecture | 32-bit RISC |
| 最大時脈頻率 | 300 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM | 384 KB |
| I-Cache / D-Cache | 16 KB / 16 KB |
| Operating Voltage Range | 1.62 V to 3.6 V |
| I/O Voltage (VDDIO) | 1.62 V to 3.6 V |
| Supply Voltage - Min | 1.8 V |
| Supply Voltage - Max | 3.3 V |
| Package Type | 100-LQFP |
| Package Size | 14x14 mm |
| 安裝類型 | Surface Mount |
| 工作溫度範圍 | -40 C to +85 C (industrial) |
| Ethernet | 10/100 Mbps MAC with 1588 PTP |
| USB | USB 2.0 FS + HS with on-chip PHY |
| CAN | CAN 2.0B + CAN-FD |
| ADC | 12-bit, up to 1.5 Msps |
| Timers | 16-bit and 32-bit timer/counter blocks |
| RoHS 狀態 | Compliant |
| MSL 等級 | 3 |
ATSAME70N21A-AN 腳位配置
| 腳位 1 | VDDIN — Voltage regulator input supply |
| 腳位 2 | VDDOUT — Voltage regulator output (1.2V core supply) |
| 腳位 3 | GND — Ground |
| 腳位 9 | VDDCORE — Core supply 1.2V |
| 腳位 10 | GND — Ground |
| 腳位 11 | NRST — Reset input (active-low) |
| 腳位 12 | TDI — JTAG Test Data In |
| 腳位 13 | TDO — JTAG Test Data Out |
| 腳位 14 | TMS — JTAG Test Mode Select / SWDIO |
| 腳位 15 | TCK — JTAG Test Clock / SWCLK |
| 腳位 63 | VDDCORE — Core supply 1.2V |
| 腳位 95 | VDDCORE — Core supply 1.2V |
| 腳位 100 | GND — Ground |
典型應用
ATSAME70N21A-AN 適用於 6 應用s: Industrial PMSM/BLDC Motor Control, Industrial IoT Gateways with 1588 PTP Synchronization, Audio and DSP Processing, Graphical HMI Displays, USB-Connected Test and Measurement, Medical Instrumentation.
Industrial PMSM/BLDC Motor Control
The ATSAME70N21A-AN's Cortex-M7 running at 300 MHz with single-precision FPU executes field-oriented control (FOC) loops on PMSM and BLDC motors at typical PWM frequencies of 12-20 kHz, leaving more than 60% of CPU margin for trajectory planning and current observers. The 384 KB SRAM on the SAME70 absorbs the entire motor-control firmware stack plus encoder buffers and space-vector modulation tables without external memory; the dual-bank 2 MB Flash supports field firmware updates over CAN-FD without halting the drive.
推薦
Industrial IoT Gateways with 1588 PTP Synchronization
The SAME70's hardware Ethernet MAC with IEEE 1588 PTPv2 timestamping gives the ATSAME70N21A-AN sub-microsecond time synchronization accuracy for distributed sensor and actuator networks such as EtherCAT, PROFINET, and IEEE 1588-based smart-grid monitoring. The Cortex-M7 at 300 MHz can run a minimal Linux-free TCP/IP stack or RTOS-based OPC-UA publisher natively, while 384 KB SRAM buffers MQTT publish/subscribe queues before they reach a backhaul link.
推薦
Audio and DSP Processing
The ATSAME70N21A-AN's Cortex-M7 DSP extensions and SIMD instructions accelerate FFT, FIR/IIR filter, and audio codec processing at sample rates up to 192 kHz, while the integrated I2S peripheral interfaces directly to external audio DACs and ADCs. With 384 KB SRAM the SAME70 can buffer several seconds of audio for voice-trigger detection, active-noise-cancelation paths, or Bluetooth audio render pipelines without an external SDRAM.
推薦
Graphical HMI Displays
The ATSAME70N21A-AN drives monochrome and color TFT LCD displays via its EBI interface and 2D graphics accelerator, while 2 MB Flash stores up to 32 MBit of UI assets and international fonts. The 300 MHz CPU renders LVGL/RT-Thread GUI screens at 30-60 fps without external SPI Flash, and the integrated hardware crypto engine on the SAME70 family secures over-the-air firmware updates.
推薦
USB-Connected Test and Measurement
The ATSAME70N21A-AN's USB 2.0 Full-Speed + Hi-Speed with on-chip PHY provides a direct host/device interface to PCs without external PHY components. The 300 MHz Cortex-M7 samples sensor data at the ADC's 1.5 Msps ceiling and streams it over USB isochronous endpoints; 384 KB SRAM buffers measurement frames before USB DMA uploads them to the host, supporting oscilloscope-class data acquisition tools.
推薦
Medical Instrumentation
The ATSAME70N21A-AN's deterministic Cortex-M7 execution and integrated Ethernet MAC with 1588 PTP make it suitable for connected patient-monitoring devices that need real-time DSP for ECG/EEG/PPG signal chains. With 384 KB SRAM and a hardware AES engine on the SAME70 family, the part supports encrypted EHR transmission over Ethernet while maintaining deterministic sample timing for FDA Class II medical-grade equipment.
推薦
推薦產品摘要
工程參考資料，適用於 ATSAME70N21A-AN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAME70N19B-AN | ATSAME70N20A-CN | ATSAME70N21B-AN | STM32F767VIT6 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | STMicroelectronics |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Core | Cortex-M7 | Cortex-M7 (same) | Cortex-M7 (same) | Cortex-M7 (same) | Cortex-M7 (same family) |
| Max Clock | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 216 MHz |
| Flash | 2 MB | 1 MB (-50%) | 1 MB (-50%) | 2 MB (same) | 2 MB (same) |
| SRAM | 384 KB | 384 KB | 384 KB | 384 KB | 512 KB |
| FPU | Single-precision | Single-precision (same) | Single-precision (same) | Single-precision (same) | Single + Double-precision |
| Ethernet MAC | 10/100 + 1588 PTP | 10/100 + 1588 PTP (same) | 10/100 + 1588 PTP (same) | 10/100 + 1588 PTP (same) | 10/100 (no 1588 hardware PTP) |
主要差異化特點
- Hardware IEEE 1588 PTPv2 Ethernet timestamping (對比STM32F767VIT6)
- 300 MHz max clock vs STM32F767 216 MHz (對比STM32F767VIT6)
- Full 2 MB Flash vs 1 MB cost-down variants (對比ATSAME70N19B-AN)
設計說明
Estimated: At 300 MHz the Cortex-M7 core draws approximately 80-100 mA from VDDCORE (1.2V) under typical DSP load, which mandates a 4-layer PCB with a dedicated core plane. Use a 4.7 uF X5R ceramic plus a 100 nF decoupling cap within 5 mm of every VDDCORE pin (1, 9, 63, 95 per the datasheet pinout). The internal 1.2V LDO requires an input bypass network of 1 uF + 100 nF on VDDIN (pin 1) to suppress switching noise on the LDO output.
Route Ethernet MII/RMII traces with controlled 50-ohm impedance and length-match within 50 mil on the TX/RX differential pairs. Isolate the 50 MHz RMII reference clock on a guard band; the SAME70's integrated 1588 PTP timestamping requires a stable 25 MHz or 50 MHz crystal with +/-50 ppm tolerance (see SAME70 datasheet section Ethernet MAC). Ethernet ground return vias should be placed every 200 mil along the MII traces.
Do not configure PB12-PB13 as GPIO when using CAN0; the CAN pins are alternate functions and require the peripheral multiplexer (PMC_PCER) to be enabled before the CAN module will release the bus. Similarly, do not enable the USB transceiver before configuring PCK2/UPLL settings or the USB HS PHY will mis-enumerate; refer to section Universal Serial Bus in Atmel 11242 for the recommended sequence.
Estimated: At 300 MHz with sustained DSP workload, junction temperature on the 100-LQFP (theta-JA ~28 C/W on a 4-layer JEDEC test board) rises about 28 C per Watt of internal power. Dissipation stays below 1.5 W on the SAME70N21A-AN under typical industrial workloads, so junction stays well within the +85 C industrial limit - no heatsink needed at room temperature but airflow or copper-pour enlargement is recommended above +70 C ambient.
合規資訊
RoHS and REACH compliant per Microchip product page. AEC-Q100 not qualified - use SAME70N21B automotive-grade variants for automotive designs.
