ATSAML11D15A-MF - 32MHz Cortex-M23 Security MCU | Microchip
MPN: ATSAML11D15A-MF ✓ 啟用中ATSAML11D15A-MF 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one package. The ATSAML11D15A-MF belongs to the hierarchy of embedded controllers, specifically a 32-bit Arm Cortex-M23 MCU within Microchip's SAM L11 family. This positioning makes it appropriate for industrial control, connected equipment, access-control terminals, and low-power sensing products requiring more capability than an 8-bit MCU without the resource requirements of a high-end application processor.
Key features include a maximum operating frequency of 32 MHz, 32 KB of Flash organized as 32K x 8, and 8 KB of SRAM. According to the Microchip product page, the device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. Its security architecture adds TrustZone isolation, secure key storage, and tamper resistance, making it useful where firmware, credentials, and communication paths require hardware-backed separation.
The Arm Cortex-M23 architecture provides a 32-bit instruction set and low-power operation suitable for always-on embedded designs. TrustZone Technology can divide execution into secure and non-secure software environments, reducing the amount of code that requires direct access to protected keys. The combination of 32 KB Flash, 8 KB SRAM, and hardware security makes the device practical for compact products that must protect configuration data or establish authenticated communication without using a larger microcontroller.
Typical applications include industrial sensor controllers, building-access terminals, secure communication modules, battery-powered condition-monitoring equipment, and compact IoT devices. Its low active current can reduce energy consumption in duty-cycled systems, while sleep current below 100 nA supports long idle periods. The 24-VQFN package also supports space-constrained designs, although exposed-pad layout and thermal management require careful PCB execution.
For PCB implementation, use the manufacturer pin-description table and land pattern when assigning tracks to the 24-VQFN package. Place decoupling capacitors close to the supply pins, preserve the exposed-pad thermal and grounding requirements, and verify the external clock, debug interface, and programming connections against the device pin list before fabrication.
This product page combines manufacturer electrical and security information with package details, practical design guidance, and a strict assessment of true drop-in alternatives. Replacement decisions are separated from packaging-only variants and from devices whose memory, package, or function differs materially.
直接替換替代品,適用於 ATSAML11D15A-MF — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATSAML11D15A-MF (相同外形與佔位) — 差異在於 Core Architecture, Package, Security Features, ADC, Number of I/Os.
此產品無可直接替換的替代品。
申請替代品ATSAML11D15A-MF 最大額定值與電氣特性
| Product Type | 32-bit Arm Cortex-M23 microcontroller |
| Series | SAM L11 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Supply Voltage Range | 1.62 V to 3.63 V |
| GPIO Count | 17 I/O pins |
| Peripheral Interrupt Count | 41 IRQs |
| Active Current | Less than 25 uA/MHz |
| Sleep Current | Less than 100 nA |
| Processor Core | Arm Cortex-M23 |
| Security Architecture | Arm TrustZone Technology |
| Security Features | Secure key storage and chip-level tamper resistance |
| 封裝 | 24-VQFN (4 x 4 mm) |
| 安裝類型 | Surface mount |
| Temperature Grade | 125 C |
ATSAML11D15A-MF 24-vqfn (4 x 4 mm) 腳位配置指南
ATSAML11D15A-MF(24-vqfn (4 x 4 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATSAML11D15A-MF.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAML11D15A-MF 適用於 6 應用s: Battery-Powered IoT Sensor Node, Secure Access-Control Terminal, Industrial Sensor Controller, Secure Communication Module, Building and Automation Controller, Low-Power Condition-Monitoring Unit.
Battery-Powered IoT Sensor Node
The ATSAML11D15A-MF fits a compact, duty-cycled sensor node that must preserve low standby demand while still providing a 32-bit Arm Cortex-M23 processing environment. Its active consumption below 25 uA/MHz and sleep consumption below 100 nA allow the controller to remain active during short measurement intervals and sleep between them. The 32 KB of Flash accommodates firmware, calibration data, and secure communication routines, while 8 KB of SRAM supports short sensor-processing tasks. Arm TrustZone Technology can isolate security-sensitive credentials from application code. The principal design trade-off is the limited memory margin, so buffers should be sized for the 8 KB SRAM and firmware growth should be checked before field updates are approved.
推薦
Secure Access-Control Terminal
The ATSAML11D15A-MF is appropriate for access-control terminals where credentials, communication keys, and firmware integrity benefit from hardware-backed isolation. Arm TrustZone Technology permits secure and non-secure software to coexist within one microcontroller, while secure key storage and chip-level tamper resistance add protection around sensitive device state. The 32 MHz Cortex-M23 core can handle credential processing and communication control, and the 17 I/O pins provide connections for a reader interface, status indication, and user controls. The 24-VQFN package reduces board area, but designers should not shrink the layout beyond the manufacturer land pattern. Firmware should be sized around the 32 KB Flash and 8 KB SRAM limits, with security updates planned to avoid exhausting code space.
推薦
Industrial Sensor Controller
The ATSAML11D15A-MF can serve as the local controller for an industrial sensing module that combines digital sensors, status communication, and local diagnostics. Its 32-bit Cortex-M23 core provides more processing headroom than a small 8-bit controller, while 32 KB of Flash and 8 KB of SRAM are sufficient for compact firmware, filtering, and protocol handling. The 1.62 V to 3.63 V operating range supports low-voltage sensor and regulated rail designs. Low sleep current below 100 nA benefits systems that monitor intermittently, although continuous sampling, differential interfaces, and communications can dominate system power. Use the manufacturer's pin descriptions to assign communication and control signals, and isolate analog sensor paths from digital activity to reduce coupling and measurement errors.
推薦
Secure Communication Module
The ATSAML11D15A-MF is well matched to a compact secure communication module that must authenticate messages and protect credentials without relying on a high-end processor. TrustZone Technology can separate cryptographic and key-management operations from general network code, while secure key storage and tamper resistance support device-level security requirements. The 32 MHz Arm Cortex-M23 core can service protocol handling and control logic, and the device's low-power active and sleep figures are useful in portable equipment. Because only 32 KB of Flash and 8 KB of SRAM are available, communication stacks and certificates must be selected with memory use in mind. External flash should not be added casually, because secure boot and firmware-update architecture must preserve the intended trust boundaries and avoid weakening the device's attack resistance.
推薦
Building and Automation Controller
The ATSAML11D15A-MF can support a compact building-automation node that coordinates digital inputs, local outputs, and status communication. Its 17 I/O pins allow the controller to interface with sensors, switches, indicators, and other low-speed building-system signals, while the 32 MHz Cortex-M23 core handles event logic and protocol tasks. The device's sleep current below 100 nA makes it suitable for installations where most time is spent waiting for events, and its 24-VQFN package supports space-constrained control boards. The 1.62 V to 3.63 V range permits use with low-dropout regulators, subject to each attached peripheral's voltage requirements. Firmware designers should use the 8 KB SRAM as the limiting factor for buffering, and PCB layouts must follow the exposed-pad requirements of the 24-VQFN package.
推薦
Low-Power Condition-Monitoring Unit
The ATSAML11D15A-MF fits a condition-monitoring unit that samples infrequently, evaluates local thresholds, and sleeps between measurements. The Arm Cortex-M23 processor can perform more structured filtering and diagnostic logic than an 8-bit controller, while active current below 25 uA/MHz and sleep current below 100 nA support long operating intervals in battery installations. The 32 KB Flash provides room for a bootloader and compact application code, and the 8 KB SRAM is adequate for bounded sample batches. Designers should avoid unbounded buffering because SRAM is limited to 8 KB and instead process data in smaller windows. For deployment, confirm operating voltage, package orientation, programming access, and the assembly packing option. Security features can protect stored thresholds and prevent unauthorized configuration changes in exposed field equipment.
推薦
推薦產品摘要
工程參考資料,適用於 ATSAML11D15A-MF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 24-VQFN (4 x 4 mm) |
| Brand | Microchip Technology |
| CPU Core | Arm Cortex-M23 |
| Maximum Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Operating Voltage | 1.62 V to 3.63 V |
| Active Current | Less than 25 uA/MHz |
| Sleep Current | Less than 100 nA |
| Security Features | TrustZone Technology, secure key storage, chip-level tamper resistance |
設計說明
Implement the 24-VQFN land pattern exactly from the manufacturer package drawing, including the exposed thermal pad and its required copper area. Place input and bulk decoupling capacitors close to their associated supply pins, and keep high-current or switching-node copper away from sensitive communication and analog inputs. Because the exposed pad is part of the package design, check its net assignment against the ATSAML11D15A pin and layout documentation before fabrication rather than treating it as an optional thermal feature.
Power budgeting should separate the MCU's active and sleep contributions from regulator quiescent current and peripheral load. The manufacturer specifies less than 25 uA/MHz active current and less than 100 nA sleep current, but these figures do not include external components or communication bursts. Estimated: for a design operating the core at 32 MHz continuously, the MCU-only active-current scale is below 800 uA before peripheral and board effects. Use the actual clock, duty cycle, and rail efficiency for the final battery-life calculation.
Assign external clock, programming, reset, and communication signals only by consulting the manufacturer's pin-description table. Keep the exposed-pad return path continuous and connect decoupling through low-inductance paths. If the device drives a sensitive sensor node, separate the MCU supply and ground return from high-current peripherals where practical. The 32 MHz maximum operating frequency requires clean board behavior, while the 32 KB Flash and 8 KB SRAM limits should guide firmware buffering and interrupt-latency design rather than hardware capacity assumptions.
Do not treat ATSAML11D15A-MF and ATSAML11D15A-MFT as different functional MCUs; the distinction is the tube versus tape-and-reel delivery format. Conversely, do not assume that ATSAML11D14A-MF is a zero-change substitute because its Flash capacity is only 16 KB rather than 32 KB. Review the linker map, bootloader, peripheral configuration, security setup, and pin mapping for any alternative. Also avoid assuming that a listing alone establishes RoHS or REACH compliance; obtain the current declaration for the exact production ordering code.
合規資訊
The available manufacturer product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose microcontroller based on the available product designation.