ATXMEGA32E5-AUR - 32MHz 32KB Flash AVR MCU | Microchip
MPN: ATXMEGA32E5-AUR ✓ 啟用中ATXMEGA32E5-AUR 概覽
An 8/16-bit microcontroller is a programmable semiconductor that executes embedded control logic using a reduced-instruction-computing architecture. The AVR XMEGA E5 family combines an AVR core, memory, timing peripherals, communications interfaces, and event-system functions in one integrated circuit. Its 32 MHz operating speed gives embedded applications more processing headroom than many conventional 8-bit designs while retaining the simple programming model and peripheral resources associated with the AVR family.
The ATXMEGA32E5-AUR includes 32 KB of read-while-write ISP Flash, a separate 4 KB boot-code section, 4 KB of SRAM, and 1 KB of EEPROM. Its memory organization supports bootloader and application-code separation, while the event system provides eight channels for coordinating peripherals without continuous processor intervention. The device also includes programmable multi-level interrupts, high-resolution timers, and communication resources suited to real-time embedded control.
The operating-voltage range is 1.8 V to 3.6 V, making the controller appropriate for low-voltage industrial, consumer, and communications equipment. Its 32-pin TQFP package supports conventional surface-mount assembly and provides a practical footprint for medium-density control boards. The ATXMEGA32E5-AUR is supplied in tape-and-reel form under the -AUR ordering suffix, while the -AU suffix denotes the tray-packaged version of the same device configuration.
Typical uses include sensor hubs, industrial monitoring modules, compact control panels, communication peripherals, motor-control interfaces, and low-power embedded products. The AVR event system is especially useful when inputs from timers, communication interfaces, or external logic must trigger actions with predictable timing. Its Flash memory, EEPROM, and boot section also make the device suitable for products that need field configuration, firmware revision control, or a protected bootloader.
Designers should confirm pin-level peripheral availability, clock requirements, programming connections, and decoupling before releasing a PCB layout. The 1.8 V to 3.6 V operating range must cover every operating mode used by the product, and clock-sensitive interfaces require layout and firmware validation against the manufacturer application guidance.
This product page combines the manufacturer specifications, ordering information, pin-location reference, drop-in alternatives, and application guidance needed to evaluate the ATXMEGA32E5-AUR as a 32 MHz AVR XMEGA design option.
直接替換替代品,適用於 ATXMEGA32E5-AUR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA32E5-AUR (相同外形與佔位) — 差異在於 Package, SRAM, Boot Code Section, Event System Channels, RoHS Status.
ATXMEGA32A4-AUR
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA32D4-AUR
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA16A4U-AUR
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA256A3B-AUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA384D3-AUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA16E5-AUR
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA32E5-AUR 最大額定值與電氣特性
| Product Type | 8/16-bit AVR XMEGA E5 microcontroller |
| 最大時脈頻率 | 32 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 16K x 16 |
| Boot Loader Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 1 KB |
| 工作電源電壓 | 1.8 V to 3.6 V |
| Architecture | AVR enhanced RISC |
| Flash Read-While-Write | Supported |
| Event System | 8 channels |
| Programmable Multi-Level Interrupts | Supported |
| 封裝 | 32-pin TQFP, 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| Delivery Format | Tape and reel |
| Industrial Temperature Range | -40 °C to +85 °C |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
ATXMEGA32E5-AUR 32-pin tqfp, 7 mm x 7 mm 腳位配置指南
ATXMEGA32E5-AUR(32-pin tqfp, 7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA32E5-AUR.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA32E5-AUR 適用於 6 應用s: Industrial Sensor Hub, Compact Communications Module, Precision Timer and Control Board, Low-Power Environmental Monitor, LED and Lighting Controller, Bootloader-Enabled Consumer Product.
Industrial Sensor Hub
The ATXMEGA32E5-AUR fits industrial sensor hubs that combine periodic measurement, local filtering, and communication over a 1.8 V to 3.6 V supply. Its 32 MHz core provides timing headroom for sampling and protocol handling, while 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM support application code, working buffers, and configuration data. The eight-channel event system can synchronize timer events, external inputs, and communication activity, reducing polling overhead. For a new 32-pin TQFP layout, the board should provide stable local decoupling and route sensitive inputs away from switching nodes.
推薦
Compact Communications Module
The ATXMEGA32E5-AUR is suitable for a compact communications module requiring deterministic timing and moderate local processing. Its 32 MHz execution rate supports protocol framing, buffer management, and background service routines, while the read-while-write Flash capability can improve update flexibility. The 1.8 V minimum operating voltage supports integration into low-voltage equipment. The eight-channel event system can link timer events to communication activity, but the exact peripheral channels, alternate pin functions, and clock tree must be assigned before PCB routing to avoid later software-driven board changes.
推薦
Precision Timer and Control Board
The ATXMEGA32E5-AUR is well matched to precision timer, sequencing, and motor-control interface boards because its 32 MHz core supports fast event handling and the event system coordinates up to eight peripheral event channels. Thirty-two kilobytes of Flash provides room for timing tables, control logic, and diagnostics, while 4 KB of SRAM accommodates active state and communication buffers. Designers should use the manufacturer pin and timer descriptions to map outputs, validate interrupt latency in firmware, and account for switching losses and thermal conditions in any attached power stage.
推薦
Low-Power Environmental Monitor
The ATXMEGA32E5-AUR supports low-power environmental monitoring products that periodically read sensors, apply local processing, and transmit results. Its 1.8 V to 3.6 V range permits operation from low-energy rails, while sleep and peripheral-control options can reduce active time between measurements. The 1 KB EEPROM is useful for calibration values and counters, and 32 KB Flash can hold measurement algorithms and communication firmware. Power budgeting should compare awake and idle current with the actual sensor load, and analog sensor inputs should use separate filtering to prevent switching activity from affecting measurements.
推薦
LED and Lighting Controller
The ATXMEGA32E5-AUR can coordinate LED timing, dimming profiles, status indications, and local user inputs in a lighting controller. Its timer and event resources allow multiple outputs to be synchronized without relying entirely on blocking software delays. With 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM, the device can retain lighting presets and operating counters while leaving room for diagnostic firmware. Current regulation must be implemented in the external power stage, and the PCB should keep switching-current paths separate from control traces to prevent illumination artifacts and false input transitions.
推薦
Bootloader-Enabled Consumer Product
The ATXMEGA32E5-AUR is appropriate for consumer accessories and connected products that benefit from a protected boot section and nonvolatile configuration storage. Its 4 KB boot-code area can hold startup logic or a bootloader, while read-while-write Flash supports application operation during appropriate programming workflows. The 32 MHz core is adequate for user-interface updates, status control, and protocol handling, and the 32-pin TQFP is compatible with standard surface-mount assembly. Production firmware should include write-cycle management, authentication requirements, recovery procedures, and programming-test coverage for every upgrade path.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA32E5-AUR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA32A4-AUR | ATXMEGA32D4-AUR | ATXMEGA16A4U-AUR | ATXMEGA256A3B-AUR | ATXMEGA384D3-AUR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) |
| XMEGA Family | E5 | A4 | D4 | A4 | A3 | D3 |
| Delivery Format | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel |
主要差異化特點
- Larger Flash allocation than the 16 KB E5 alternative (對比ATXMEGA16E5-AUR)
- Direct A4-family candidate with matching memory and clock (對比ATXMEGA32A4-AUR)
- Substantially smaller program footprint than larger-memory XMEGA options (對比ATXMEGA256A3B-AUR)
設計說明
Place the decoupling network directly at the ATXMEGA32E5-AUR supply pins and keep the high-current return path short. Route clock, programming, and communication signals away from switching nodes and noisy regulators. The 1.8 V to 3.6 V operating range requires a rail that remains valid during startup and peak processing activity; validate the complete power tree rather than only its nominal voltage.
Assign alternate-function pins only after mapping the required timers, event-system channels, serial interfaces, and programming signals onto the 32-pin TQFP. Leave test points for programming and debugging, and use a clear ground reference around the device. For designs that migrate from another XMEGA family, compare the package drawing and pin-description tables because equal flash capacity does not guarantee identical peripheral multiplexing.
Do not assume that every 32 MHz, 32 KB Flash XMEGA MCU is firmware-compatible with the ATXMEGA32E5-AUR. Interrupt priorities, timer channels, peripheral addresses, bootloader behavior, and alternate pin functions can differ across XMEGA families. Before releasing a replacement, rebuild the target configuration, test every used peripheral, and exercise boot, watchdog, brownout, and upgrade paths on production-intent hardware.
Budget the controller rail for both active processing and peripheral load. The 32 MHz maximum clock does not imply continuous operation, so firmware power requirements should be measured in the final clock configuration. Use sleep modes, disable unused peripherals, and retain local voltage regulation close to the TQFP if the product operates across the full 1.8 V to 3.6 V range.
合規資訊
Material-compliance declarations were not identified in the product pages. AEC-Q100 is not applicable to this general-purpose industrial-temperature microcontroller ordering configuration.