ATXMEGA64B3-MUR - 32MHz 64KB AVR MCU | Microchip Technology
MPN: ATXMEGA64B3-MUR ✓ 啟用中ATXMEGA64B3-MUR 概覽
An AVR XMEGA microcontroller is an 8-bit RISC microcontroller family that combines embedded processing with analog and digital peripherals in one device. Within the product hierarchy, the ATXMEGA64B3 belongs to the AVR XMEGA B3 series, the XMEGA family, the AVR microcontrollers, and the broader semiconductor category. This integration allows a design to replace several separate discrete interface, control, and conversion devices.
Key device characteristics include 32 MHz processing, 64 KB flash, 4 KB SRAM, 2 KB EEPROM, and operation from 1.6 V to 3.6 V. The 64-pin package provides 36 I/O pins and supports communication functions including UART, SPI, and TWI. These resources are suitable for applications requiring moderate processing throughput, data logging, mixed-signal measurement, and multiple serial interfaces.
The ATXMEGA64B3 architecture provides a 32 MHz clock path and 16-bit working register organization while retaining an efficient 8-bit instruction set. The 32K × 16 flash organization supports efficient access to 16-bit program words. On-chip SRAM supports working data and stack operations, while EEPROM provides nonvolatile storage for calibration values, configuration parameters, and operating counters.
Typical uses include utility metering, home automation, climate control, industrial control, medical equipment, USB connectivity, power tools, and fire-alarm systems. Its combination of 36 I/O pins and integrated analog and serial peripherals is particularly useful when a compact controller must manage sensors, actuators, communications, and local data storage.
PCB design should account for the exposed thermal pad, clean supply and ground distribution, and decoupling close to the power pins. Designers should also verify the complete pin description table in the manufacturer datasheet, especially for analog inputs, alternate peripheral functions, power pins, and the exposed pad before assigning tracks.
This product page combines the verified device identity, package information, memory characteristics, and manufacturer application information with drop-in alternatives, comparison parameters, and practical PCB guidance. It is designed to help engineers assess the ATXMEGA64B3-MUR for new designs or footprint-compatible replacements without overlooking peripheral, qualification, or temperature-range differences.
直接替換替代品,適用於 ATXMEGA64B3-MUR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA64B3-MUR (相同外形與佔位) — 差異在於 Package.
ATXMEGA64B3-MH
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA64B3-AUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64B3-MHR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64B3-ANR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64B3-MUR 最大額定值與電氣特性
| Device Type | 8/16-bit RISC Flash Microcontroller |
| Product Family | AVR XMEGA B3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (32K × 16 words) |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| I/O Pin Count | 36 pins |
| Interrupt Vector Count | 44 vectors |
| 封裝 | 64-QFN (9 × 9 mm) |
| Package Pin Count | 64 pins |
| Exposed Thermal Pad | Yes |
| 安裝類型 | Surface Mount |
| Serial Interfaces | UART, SPI, and TWI |
ATXMEGA64B3-MUR 64 pins 腳位配置指南
ATXMEGA64B3-MUR(64 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA64B3-MUR.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA64B3-MUR 適用於 6 應用s: Utility Metering, Industrial Control, Home Automation and Climate Control, Medical and Diagnostic Equipment, USB Connectivity and Peripherals, Power Tools and Fire Alarm Systems.
Utility Metering
The ATXMEGA64B3-MUR fits utility meters that combine pulse sensing, local storage, operator communications, and configurable measurement in a compact controller. Its 32 MHz AVR core provides timely handling of metering tasks, while 64 KB flash and 2 KB EEPROM support firmware, calibration constants, counters, and event records. The 36 available I/O pins leave room for sensor inputs, alarm outputs, status indicators, and communication interfaces without requiring a large external interface matrix. UART, SPI, and TWI support structured links to measurement modules or local service ports. The 64-QFN 9 × 9 mm package also reduces board area, although careful exposed-pad layout and supply decoupling remain essential for reliable low-voltage operation.
推薦
Industrial Control
The ATXMEGA64B3-MUR is appropriate for compact industrial controllers that coordinate sensors, actuators, status indicators, and field-bus-ready serial links. The 32 MHz processor supports responsive control logic, and its 64 KB flash provides room for protocol stacks, diagnostics, and field-update routines. Thirty-six I/O pins can support digital inputs, discrete outputs, and peripheral multiplexing, while the integrated UART, SPI, and TWI interfaces reduce the need for external communication devices. The 2 KB EEPROM is useful for retaining configuration and counters through power cycles. For factory equipment, the B3 family's application positioning, low-voltage operation from 1.6 V to 3.6 V, and compact package make it suitable for space-constrained control boards.
推薦
Home Automation and Climate Control
The ATXMEGA64B3-MUR can serve as the local controller in home automation, climate-control, and appliance modules requiring several local inputs and outputs plus reliable communications. Its 32 MHz execution rate supports sensor polling, display updates, control loops, and communication handling in one processor. The 36 I/O pins can be allocated across temperature sensors, relays, pushbuttons, indicators, and bus-connected modules, while UART, SPI, and TWI provide flexible interface choices. EEPROM preserves user settings or calibration values without consuming flash space. In wall-panel or controller products, the 64-QFN footprint saves area, but designers should reserve adequate copper around the exposed pad and maintain low-impedance supply and ground paths.
推薦
Medical and Diagnostic Equipment
The ATXMEGA64B3-MUR can support compact medical or diagnostic equipment where a local processor must coordinate sensors, controls, data logging, and service communications. The 32 MHz AVR core supports deterministic control and measurement routines, while 64 KB flash accommodates application firmware and diagnostics. Its 4 KB SRAM is suitable for working buffers, and 2 KB EEPROM can retain calibration parameters, counters, or configuration identifiers. The 36 I/O pins and multiple serial interfaces allow a design to connect sensing front ends, human-interface components, and service connectors with fewer external devices. Because medical-product suitability depends on the complete system, validate electrical limits, operating temperature, validation controls, and applicable product requirements before using the MCU in a regulated design.
推薦
USB Connectivity and Peripherals
The ATXMEGA64B3-MUR is suitable for compact connectivity accessories that need local control alongside serial-device management. Its 32 MHz processor can manage device configuration, protocol handling, status reporting, and data buffering, while 64 KB flash supports embedded connectivity software and configuration logic. UART, SPI, and TWI allow the controller to work with transceivers, sensors, storage devices, or host processors. Thirty-six I/O pins provide flexibility for link control, indicators, and user inputs. The 1.6 V to 3.6 V operating range can simplify integration with low-voltage power trees, while the compact 64-QFN package assists USB-peripheral form factors. Confirm the exact USB-function requirements against the device block diagram before selecting the MCU for a USB interface.
推薦
Power Tools and Fire Alarm Systems
The ATXMEGA64B3-MUR fits power-tool controllers, fire-alarm nodes, and safety-oriented embedded products that combine local control, event handling, communications, and nonvolatile records. The 32 MHz core supports motor-command logic, sensor monitoring, diagnostic sequencing, and alarm-state management. Its 36 I/O pins can accommodate switches, status LEDs, sensor inputs, and communication lines, while UART, SPI, and TWI support peripheral or service connections. The 64 KB flash provides room for substantial firmware, and 2 KB EEPROM can store counters or fault-history information. The compact 64-QFN package is useful in tightly packaged products. Designers should apply suitable fault monitoring, isolation, watchdog, and power-fail strategies at the system level rather than treating the MCU alone as a safety certification.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA64B3-MUR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA64B3-MH | ATXMEGA64B3-AUR | ATXMEGA64B3-MHR | ATXMEGA64B3-ANR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Ordering Qualification | M-series configuration | MH suffix configuration | AUR suffix configuration | MHR suffix configuration | ANR suffix configuration |
主要差異化特點
- Combines a 32 MHz AVR core with 64 KB flash in a 9 x 9 mm QFN (對比ATXMEGA64B3-MH)
- Provides 36 I/O pins for compact mixed-signal control boards (對比ATXMEGA64B3-AUR)
- Integrates UART, SPI, TWI, 4 KB SRAM, and 2 KB EEPROM (對比ATXMEGA64B3-MHR)
- Supports a 1.6 V to 3.6 V operating range (對比ATXMEGA64B3-ANR)
設計說明
Assign all 64 package positions directly from the manufacturer pin-description table, including power, ground, no-connect, analog, and alternate-function positions. Keep the exposed pad as a thermal and electrical connection rather than treating it as an unused pin. Route sensitive analog inputs away from switching nodes and digital return currents, and follow the package drawing for the pad dimensions and land pattern.
Place the required supply capacitors immediately adjacent to the device power pins and provide a low-impedance ground return. Keep analog and digital supply routing predictable within the 1.6 V to 3.6 V operating range. Before finalizing the power tree, consult the electrical-characteristics table for current limits, startup behavior, and any voltage sequencing requirements rather than estimating them from the maximum clock frequency.
The 64-QFN package relies on its exposed pad and surrounding PCB copper for heat spreading. Use the manufacturer's land pattern and thermal guidance, and avoid cutting thermal copper beneath the device unless the recommended assembly process explicitly permits it. At 32 MHz, switching losses depend on the workload and active peripherals, so evaluate thermal performance across the maximum processor load and the highest intended ambient temperature.
Do not treat a matching 64-QFN outline as sufficient evidence that two ATXMEGA64B3 ordering codes are interchangeable. Verify temperature range, carrier format, qualification, electrical limits, and the manufacturer ordering table. Also confirm each peripheral signal and alternate-function mapping before schematic release, since many of the 36 I/O pins are multiplexed across digital, analog, timer, and communication functions.
合規資訊
No exact compliance declaration for ATXMEGA64B3-MUR was identified in the manufacturer or distributor records. Check the current Microchip product declaration and material-compliance documentation before procurement release.