C8051F504-IM - 50MHz 8051 MCU with 32KB Flash | Silicon Labs
MPN: C8051F504-IM ✓ 啟用中C8051F504-IM 概覽
A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, and communications interfaces in one device. The C8051F50x family provides up to 50 MIPS of performance and integrates a 12-bit ADC within packages ranging from 32 to 48 pins. This combination allows automotive and industrial equipment designers to reduce component count while retaining dedicated communication channels for distributed control systems.
Key features include 50 MHz operation, 32 KB of Flash memory, 4.25 KB of RAM, a 32-channel 12-bit ADC, and operating-voltage options identified as 2.5 V, 3.3 V, and 5 V. The device also supports CAN 2.0, LIN 2.1, SPI, UART, and I2C. Silicon Labs describes pin-for-pin compatibility across the C8051F50x, C8051F51x, and C8051F58x/59x families, subject to the availability of matching package variants.
The C8051F50x architecture is designed for compact, high-performance embedded systems where communications and analog acquisition are both important. Its 50 MHz execution rate supports time-sensitive control tasks, while the mixed-signal resources allow direct connection of analog sensors without requiring a separate high-resolution converter. The 48-QFN format also keeps the PCB footprint relatively compact.
Typical uses include automotive body and chassis controllers, industrial automation equipment, CAN-based node controllers, LIN sub-networks, sensor-acquisition modules, motor-control subsystems, and compact communications gateways. The family is particularly suitable where several serial interfaces and one or more analog channels must coexist in a space-constrained assembly.
Layout should account for the exposed pad, analog ground and supply connections, high-speed clock routing, and communication signal integrity. Before replacing a device in an existing PCB, verify the exact suffix, package, exposed-pad connection, pin multiplexing, and firmware requirements rather than relying only on the C8051F50x family name.
This page combines device specifications, interface and package guidance, verified family compatibility information, and practical selection criteria. It also distinguishes exact drop-in candidates from variants that differ in package or ordering suffix, helping engineers shorten replacement evaluation without overlooking PCB or firmware compatibility.
直接替換替代品,適用於 C8051F504-IM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F504-IM (相同外形與佔位) — 差異在於 Package, RAM, Programming Interface, ADC Resolution, CAN Interface.
C8051F501-IM
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F500-IM
✅ 直接替換聯絡詢價
查看資料表 →C8051F504-IM 最大額定值與電氣特性
| Microcontroller Family | C8051F50x mixed-signal Flash MCU family |
| Processor Core | 8-bit 8051 CISC core |
| 最大時脈頻率 | 50 MHz |
| Maximum Performance | 50 MIPS |
| Flash Program Memory | 32 KB (32K x 8) |
| RAM | 4.25 KB |
| ADC Resolution | 12 bits |
| ADC Channels | 32 channels |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, UART, and I2C |
| Supply Voltage Options | 2.5 V, 3.3 V, and 5 V |
| 封裝 | 48-QFN (7 x 7 mm) |
| Automotive Qualification | AEC-Q100 qualified |
| Maximum Operating Temperature | 125 °C |
| 安裝類型 | Surface mount |
| Programming Interface | In-system programming |
C8051F504-IM 48-qfn (7 x 7 mm) 腳位配置指南
C8051F504-IM(48-qfn (7 x 7 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F504-IM.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F504-IM 適用於 6 應用s: Automotive CAN Controller, LIN Automotive Sub-Network Node, Industrial Sensor Acquisition Module, CAN-Based Automation Node, Motor and Actuator Control Subsystem, Compact Communications Gateway.
Automotive CAN Controller
The C8051F504-IM fits an automotive CAN controller because it combines a 50 MHz 8051 core, 32 KB Flash, 4.25 KB of RAM, and a CAN 2.0 interface in a 48-QFN package. Its 12-bit, 32-channel ADC can acquire sensor inputs while the processor handles message routing, diagnostics, and control logic. Designers should add the appropriate CAN transceiver, protection network, reference design, and firmware initialization. Verify the exact pin multiplexing and automotive qualification requirements before releasing a production design.
推薦
LIN Automotive Sub-Network Node
The C8051F504-IM is appropriate for a compact LIN node that must combine communication and local signal acquisition. Its LIN 2.1 interface handles low-cost vehicle-network communication, while the integrated 12-bit ADC supports pressure, temperature, position, and other sensor inputs. The 50 MHz core provides performance headroom for diagnostics and application logic. Implementation still requires a suitable LIN transceiver, correct termination, filtering, and a validated mapping between firmware and the device pin-multiplexing options.
推薦
Industrial Sensor Acquisition Module
The C8051F504-IM suits an industrial sensor-acquisition module because its 32-channel, 12-bit ADC reduces the need for a separate converter, while 32 KB Flash and 4.25 KB RAM accommodate application code and local buffering. SPI, UART, and I2C provide flexible links to sensors, signal conditioners, and host processors. At 50 MHz, the 8051 core can service time-critical sampling tasks. Validate the analog input range, acquisition timing, reference accuracy, grounding, and channel multiplexing in the target environment.
推薦
CAN-Based Automation Node
The C8051F504-IM works well in a CAN-based industrial automation node because it combines CAN 2.0, a 50 MHz processing core, and integrated analog conversion in one 48-QFN device. A compact controller can acquire local process signals and publish them over a CAN network while retaining SPI, UART, or I2C for local expansion. Use an external transceiver and protection components on the bus. The choice is especially attractive when space, mixed-signal integration, and deterministic control matter more than a software ecosystem change.
推薦
Motor and Actuator Control Subsystem
The C8051F504-IM can support a motor or actuator-control subsystem when the design requires fast control computation alongside analog feedback. Its 50 MHz 8051 core executes control logic, the 12-bit ADC measures position, current, or voltage, and CAN 2.0 or LIN 2.1 communicates with wider vehicle or machine networks. The 32 KB Flash and 4.25 KB RAM are adequate for embedded control firmware, but the designer must add appropriate power-stage drivers, current sensing, protection, and safe-state behavior.
推薦
Compact Communications Gateway
The C8051F504-IM is suitable for a compact communications gateway that must bridge serial interfaces and collect analog status data. Its 50 MHz core and 32 KB Flash can manage protocol conversion, while CAN 2.0, LIN 2.1, SPI, UART, and I2C provide multiple external connection options. The integrated 12-bit ADC can monitor local supply, temperature, or sensor channels without a separate converter. The 48-QFN package helps reduce board area, although EMC, thermal, and long-term availability requirements should be reviewed before deployment.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F504-IM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | C8051F501-IM | C8051F500-IM |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
主要差異化特點
- High-speed 8051 processing with integrated mixed-signal conversion (對比C8051F501-IM)
- Native CAN 2.0 and LIN 2.1 connectivity (對比C8051F500-IM)
- Automotive-oriented 48-QFN integration (對比C8051F504-IMR)
設計說明
Use the exposed-pad land pattern and paste volume specified by Silicon Labs rather than treating the 48-QFN as a generic leadless package. The exposed pad is central to thermal performance and may also be tied to a supply or ground net. Preserve the manufacturer-recommended copper and solder-mask geometry, and check assembly capability because the 7 x 7 mm QFN is fine-pitch and sensitive to solder voiding.
Separate analog and digital returns carefully and place the MCU, analog input components, and external decoupling close to their associated pins. Keep the 50 MHz clock route short and away from CAN, LIN, and other high-current switching nodes. Route communication interfaces away from the exposed-pad thermal area where practical, and use the datasheet pin-description table to determine which pins can be multiplexed for analog, digital, or alternate peripheral functions.
Do not treat all C8051F50x suffixes as interchangeable. Confirm the QFN package, exposed-pad connection, temperature grade, AEC-Q100 qualification, Flash configuration, and peripheral differences for the exact replacement. A family-level statement of pin-for-pin compatibility does not guarantee identical behavior when pin multiplexing, clock sources, ADC channels, or legacy firmware depend on device-specific options.
合規資訊
The C8051F504-IM is described as AEC-Q100 qualified and tested for enhanced temperature operation up to 125 °C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration.