Silicon Labs

C8051F504-IM - 50MHz 8051 MCU with 32KB Flash | Silicon Labs

料号: C8051F504-IM ✓ 量产中
2.5 V, 3.3 V, and 5 V Vdss 48-QFN (7 x 7 mm) Package 50 MHz Speed 32 KB (32K x 8) Memory
最小起订量: 1 |

C8051F504-IM 概述

Silicon Labs C8051F504-IM is an automotive and industrial 8-bit C8051 mixed-signal microcontroller operating at 50 MHz, with 32 KB of Flash program memory, 4.25 KB of RAM, and a 48-QFN (7 x 7 mm) package. It integrates a 12-bit ADC, CAN 2.0 and LIN 2.1 communication, SPI, UART, and I2C interfaces for compact embedded-control designs.

A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, and communications interfaces in one device. The C8051F50x family provides up to 50 MIPS of performance and integrates a 12-bit ADC within packages ranging from 32 to 48 pins. This combination allows automotive and industrial equipment designers to reduce component count while retaining dedicated communication channels for distributed control systems.

Key features include 50 MHz operation, 32 KB of Flash memory, 4.25 KB of RAM, a 32-channel 12-bit ADC, and operating-voltage options identified as 2.5 V, 3.3 V, and 5 V. The device also supports CAN 2.0, LIN 2.1, SPI, UART, and I2C. Silicon Labs describes pin-for-pin compatibility across the C8051F50x, C8051F51x, and C8051F58x/59x families, subject to the availability of matching package variants.

The C8051F50x architecture is designed for compact, high-performance embedded systems where communications and analog acquisition are both important. Its 50 MHz execution rate supports time-sensitive control tasks, while the mixed-signal resources allow direct connection of analog sensors without requiring a separate high-resolution converter. The 48-QFN format also keeps the PCB footprint relatively compact.

Typical uses include automotive body and chassis controllers, industrial automation equipment, CAN-based node controllers, LIN sub-networks, sensor-acquisition modules, motor-control subsystems, and compact communications gateways. The family is particularly suitable where several serial interfaces and one or more analog channels must coexist in a space-constrained assembly.

Layout should account for the exposed pad, analog ground and supply connections, high-speed clock routing, and communication signal integrity. Before replacing a device in an existing PCB, verify the exact suffix, package, exposed-pad connection, pin multiplexing, and firmware requirements rather than relying only on the C8051F50x family name.

This page combines device specifications, interface and package guidance, verified family compatibility information, and practical selection criteria. It also distinguishes exact drop-in candidates from variants that differ in package or ordering suffix, helping engineers shorten replacement evaluation without overlooking PCB or firmware compatibility.

直接替换替代料: C8051F504-IM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: C8051F504-IM (相同外形与封装尺寸) ——差异在于 Package, RAM, Programming Interface, ADC Resolution, CAN Interface.

Silicon Labs
Programming Interface: In-system programming (ISP)
ADC Resolution: 12 bit
CAN Interface: Yes
对比 C8051F504-IM →
Silicon Labs
Package: 32-QFN (5 mm x 5 mm)
RAM: 4KB
对比 C8051F504-IM →
Silicon Labs
Package: 32-QFN (5x5 mm)
RAM: 4.25 KB total (256 B SRAM + 4 KB AUX RAM)
对比 C8051F504-IM →

C8051F501-IM

✅ 直接替换
📦 48-QFN (7 x 7 mm)
50 MHz clock and 32 KB Flash match the target with a 0% difference on both stated ratings; the peripheral mix differs and must be checked before firmware reuse.

📋 参考替代料(不在目录中)

C8051F500-IM

✅ 直接替换
Silicon Labs
📦 48-QFN (7 x 7 mm)
8-bit mixed-signal flash microcontroller · C8051F50x · 8051 · 50 MHz · 50 MIPS · Flash · 64 KB (64K x 8) · 4.25 KB (4.25K x 8)

联系询价

查看数据手册 →

C8051F504-IM 最大额定值与电气特性

Microcontroller Family C8051F50x mixed-signal Flash MCU family
Processor Core 8-bit 8051 CISC core
最大时钟频率 50 MHz
Maximum Performance 50 MIPS
Flash Program Memory 32 KB (32K x 8)
RAM 4.25 KB
ADC Resolution 12 bits
ADC Channels 32 channels
CAN Interface CAN 2.0
LIN Interface LIN 2.1
Serial Interfaces SPI, UART, and I2C
Supply Voltage Options 2.5 V, 3.3 V, and 5 V
封装 48-QFN (7 x 7 mm)
Automotive Qualification AEC-Q100 qualified
Maximum Operating Temperature 125 °C
安装类型 Surface mount
Programming Interface In-system programming

C8051F504-IM 48-qfn (7 x 7 mm) 引脚配置指南

C8051F504-IM(48-qfn (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

C8051F504-IM 的 48-qfn (7 x 7 mm) 封装引脚图

暂无详细引脚数据: C8051F504-IM.

请参阅 数据手册 以查看完整引脚配置。

典型应用

C8051F504-IM 适用于 6 应用s: Automotive CAN Controller, LIN Automotive Sub-Network Node, Industrial Sensor Acquisition Module, CAN-Based Automation Node, Motor and Actuator Control Subsystem, Compact Communications Gateway.

🚗

Automotive CAN Controller

The C8051F504-IM fits an automotive CAN controller because it combines a 50 MHz 8051 core, 32 KB Flash, 4.25 KB of RAM, and a CAN 2.0 interface in a 48-QFN package. Its 12-bit, 32-channel ADC can acquire sensor inputs while the processor handles message routing, diagnostics, and control logic. Designers should add the appropriate CAN transceiver, protection network, reference design, and firmware initialization. Verify the exact pin multiplexing and automotive qualification requirements before releasing a production design.

🚗

LIN Automotive Sub-Network Node

The C8051F504-IM is appropriate for a compact LIN node that must combine communication and local signal acquisition. Its LIN 2.1 interface handles low-cost vehicle-network communication, while the integrated 12-bit ADC supports pressure, temperature, position, and other sensor inputs. The 50 MHz core provides performance headroom for diagnostics and application logic. Implementation still requires a suitable LIN transceiver, correct termination, filtering, and a validated mapping between firmware and the device pin-multiplexing options.

🏭

Industrial Sensor Acquisition Module

The C8051F504-IM suits an industrial sensor-acquisition module because its 32-channel, 12-bit ADC reduces the need for a separate converter, while 32 KB Flash and 4.25 KB RAM accommodate application code and local buffering. SPI, UART, and I2C provide flexible links to sensors, signal conditioners, and host processors. At 50 MHz, the 8051 core can service time-critical sampling tasks. Validate the analog input range, acquisition timing, reference accuracy, grounding, and channel multiplexing in the target environment.

🏭

CAN-Based Automation Node

The C8051F504-IM works well in a CAN-based industrial automation node because it combines CAN 2.0, a 50 MHz processing core, and integrated analog conversion in one 48-QFN device. A compact controller can acquire local process signals and publish them over a CAN network while retaining SPI, UART, or I2C for local expansion. Use an external transceiver and protection components on the bus. The choice is especially attractive when space, mixed-signal integration, and deterministic control matter more than a software ecosystem change.

⚡

Motor and Actuator Control Subsystem

The C8051F504-IM can support a motor or actuator-control subsystem when the design requires fast control computation alongside analog feedback. Its 50 MHz 8051 core executes control logic, the 12-bit ADC measures position, current, or voltage, and CAN 2.0 or LIN 2.1 communicates with wider vehicle or machine networks. The 32 KB Flash and 4.25 KB RAM are adequate for embedded control firmware, but the designer must add appropriate power-stage drivers, current sensing, protection, and safe-state behavior.

🌐

Compact Communications Gateway

The C8051F504-IM is suitable for a compact communications gateway that must bridge serial interfaces and collect analog status data. Its 50 MHz core and 32 KB Flash can manage protocol conversion, while CAN 2.0, LIN 2.1, SPI, UART, and I2C provide multiple external connection options. The integrated 12-bit ADC can monitor local supply, temperature, or sensor channels without a separate converter. The 48-QFN package helps reduce board area, although EMC, thermal, and long-term availability requirements should be reviewed before deployment.

推荐产品汇总

C8051F504-IM Silicon Labs 用于: Automotive CAN Controller, LIN Automotive Sub-Network Node, Industrial Sensor Acquisition Module, CAN-Based Automation Node, Motor and Actuator Control Subsystem, Compact Communications Gateway C8051F504-IQ Same C8051F504 family ordering option 用于: Automotive CAN Controller, Industrial Sensor Acquisition Module, Compact Communications Gateway TJA1057GTK/3Z NXP Semiconductors 用于: Automotive CAN Controller, CAN-Based Automation Node C8051F504-IMR Same 48-QFN C8051F504 family option 用于: LIN Automotive Sub-Network Node C8051F501-IM Same-family 48-QFN control candidate 用于: Motor and Actuator Control Subsystem C8051F500-IM Silicon Labs 用于: Motor and Actuator Control Subsystem
What is the operating frequency of the C8051F504-IM?
The C8051F504-IM operates at 50 MHz and can execute at up to 50 MIPS. According to the Silicon Labs C8051F50x/51x datasheet and the manufacturer product page, this performance combines an 8-bit 8051 core with mixed-signal resources. It is suitable for control loops, communications gateways, and automotive subsystems that need substantially more processing headroom than a conventional low-speed 8-bit microcontroller while retaining a compact 48-QFN footprint.
How much memory does the C8051F504-IM have?
The C8051F504-IM provides 32 KB of Flash program memory and 4.25 KB of RAM. The DigiKey listing identifies the Flash organization as 32K x 8, while the product details describe 4.25 KB of RAM. This combination is suitable for firmware, boot code, calibration values, communication tables, and moderate data buffers in compact embedded systems, although applications requiring large frame buffers should account for the limited RAM.
Which communication interfaces are available on the C8051F504-IM?
The C8051F504-IM supports CAN 2.0, LIN 2.1, SPI, UART, and I2C. The Mouser listing for the closely identified C8051F504 family device identifies these serial interfaces, and the Silicon Labs family page describes automotive and industrial mixed-signal MCUs. CAN and LIN are especially useful for vehicle networks, while SPI, UART, and I2C support sensors, external converters, displays, and service interfaces.
What analog measurement capability is built into the C8051F504-IM?
The C8051F504-IM includes a 32-channel, 12-bit ADC. The Microchip USA product listing specifies the 12-bit, 32-channel converter, while Silicon Labs describes integration of a 12-bit ADC into the C8051F50x family. This allows analog sensor signals to be acquired without a separate converter, subject to the datasheet limits for channel multiplexing, input range, acquisition time, and reference voltage.
Where can I download the C8051F504-IM datasheet PDF?
The manufacturer datasheet is available from Silicon Labs as the C8051F50x/51x PDF at https://www.silabs.com/documents/public/data-sheets/C8051F50x-51x.pdf. The PDF covers the C8051F50x family, including the C8051F504 device, and contains the pin descriptions, electrical characteristics, memory map, peripheral details, and package information required for schematic design and PCB layout.
Where is the C8051F504-IM pinout located?
The C8051F504-IM pinout is located in the pin-description and package-drawing sections of the Silicon Labs C8051F50x/51x datasheet. The device uses a 48-QFN package with an exposed pad, so the exact thermal-pad connection and analog, digital, ground, supply, reset, clock, and communication assignments must be taken from the datasheet pin table rather than inferred from a generic 48-pin drawing.
Is the C8051F504-IM suitable for automotive applications?
Yes, the C8051F504-IM is identified as an automotive and industrial MCU that is AEC-Q100 qualified and tested for enhanced operation up to 125 °C. Its 50 MHz 8051 core, integrated 12-bit ADC, CAN 2.0, and LIN 2.1 interfaces fit vehicle body, chassis, sensor, and distributed-control systems. Automotive qualification does not remove the need to validate transient immunity, EMC, and application-specific reliability requirements.
What is the C8051F504-IM package and pin count?
The C8051F504-IM is packaged as a 48-QFN measuring 7 x 7 mm. The exact listing describes an 8051 mixed-signal MCU in a 48-QFN package with an exposed pad. Because the exposed pad is part of the thermal and often electrical design, verify its land pattern, paste coverage, and connection in the Silicon Labs package drawing before laying out a new board.
C8051F504-IM vs C8051F501-IM — which one should I choose?
The C8051F504-IM is the appropriate choice when its 32 KB Flash configuration and 48-QFN implementation match the target design; choose the C8051F501-IM only after checking its exact memory and peripheral configuration. The manufacturer states that pin-for-pin compatibility exists across several C8051 families, but family-level compatibility does not eliminate the need to verify package suffix, exposed-pad implementation, firmware dependencies, and every peripheral used by the product.
What is the difference between C8051F504-IM and C8051F504-IMR?
The C8051F504-IM and C8051F504-IMR are both listed as 48-QFN C8051F50x devices with 32 KB Flash and 50 MHz operation, but the ordering suffix must still be checked for grade, temperature, and shipment configuration. The C8051F504-IMR listing is marked obsolete in one market listing, while the -IM appears as a distinct ordering option. Confirm the manufacturer ordering table before treating either suffix as a substitute.
What can replace the C8051F504-IM on the same PCB?
The closest same-package candidates identified for review are the C8051F501-IM and C8051F500-IM, both members of the 48-pin C8051F50x family. Silicon Labs states that pin-for-pin compatibility exists between C8051F50x-family devices when package variants match. A replacement still requires comparison of Flash, RAM, ADC channels, communication peripherals, clocking, pin multiplexing, and existing firmware before production use.
What is the best cross-brand equivalent for the C8051F504-IM?
No cross-brand drop-in equivalent can be recommended for the C8051F504-IM based on confirmed manufacturer or distributor compatibility records. A 48-QFN footprint alone does not establish compatibility because this device combines a proprietary 8051 architecture, mixed-signal peripherals, CAN 2.0, LIN 2.1, and specific pin multiplexing. The practical alternatives are same-family Silicon Labs options or a redesign using a different MCU family, requiring firmware, schematic, and PCB changes.
When should I choose the C8051F504-IM over a more general-purpose MCU?
Choose the C8051F504-IM when the design needs its combination of 50 MHz 8051 execution, 32 KB Flash, integrated 12-bit ADC, CAN 2.0, LIN 2.1, and a compact 48-QFN package. It is particularly compelling for automotive and industrial nodes where CAN or LIN connectivity and analog measurement are central. Select another MCU family when a different ecosystem, memory architecture, radio, display interface, or software model provides a better system-level fit.
Is the C8051F504-IM suitable for CAN and LIN sensor networks?
The C8051F504-IM is suitable for CAN and LIN sensor networks because it integrates CAN 2.0, LIN 2.1, SPI, UART, and I2C alongside a 32-channel 12-bit ADC. This allows a compact node to acquire sensor data and communicate it over an automotive or industrial serial network. Use the datasheet for transceiver selection, pin multiplexing, termination, filtering, and firmware configuration rather than driving the network bus pins directly.
Where can I buy the C8051F504-IM and check current availability?
Use the Request a Quote form on this page to request current C8051F504-IM availability, order quantity, and lead time from XAIPART. The device is currently listed by major distributors as a 50 MHz, 32 KB Flash, 48-QFN microcontroller, but inventory and delivery schedules can change by package suffix and quantity. The quote form allows procurement to confirm the exact ordering code without relying on stale catalog information.

工程参考数据: C8051F504-IM ——对比、设计指导和合规信息。

选型指南

Choose the C8051F504-IM when the design benefits from a 50 MHz 8-bit 8051 core, 32 KB Flash, 4.25 KB RAM, a 32-channel 12-bit ADC, and native CAN 2.0, LIN 2.1, SPI, UART, and I2C interfaces in a 48-QFN package. It is a strong fit for compact automotive and industrial nodes where mixed-signal acquisition and vehicle-network communications must coexist. Consider the C8051F501-IM or C8051F500-IM only after their exact memory, ADC, peripheral, and firmware requirements have been checked against the target. The C8051F504-IMR is not a fresh selection default because a market listing marks it obsolete. For a cross-brand migration, treat the change as a redesign rather than a drop-in substitution: the 8051 instruction set, peripheral architecture, development tools, and board-level pin functions must be reassessed.

与替代料对比

参数 本产品 C8051F501-IM C8051F500-IM
Brand Silicon Labs Silicon Labs Silicon Labs
Package 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm)
Processor Core 8-bit 8051 8-bit 8051 8-bit 8051
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz

关键差异点

  • High-speed 8051 processing with integrated mixed-signal conversion (对比 C8051F501-IM)
  • Native CAN 2.0 and LIN 2.1 connectivity (对比 C8051F500-IM)
  • Automotive-oriented 48-QFN integration (对比 C8051F504-IMR)

设计说明

Use the exposed-pad land pattern and paste volume specified by Silicon Labs rather than treating the 48-QFN as a generic leadless package. The exposed pad is central to thermal performance and may also be tied to a supply or ground net. Preserve the manufacturer-recommended copper and solder-mask geometry, and check assembly capability because the 7 x 7 mm QFN is fine-pitch and sensitive to solder voiding.

Separate analog and digital returns carefully and place the MCU, analog input components, and external decoupling close to their associated pins. Keep the 50 MHz clock route short and away from CAN, LIN, and other high-current switching nodes. Route communication interfaces away from the exposed-pad thermal area where practical, and use the datasheet pin-description table to determine which pins can be multiplexed for analog, digital, or alternate peripheral functions.

Do not treat all C8051F50x suffixes as interchangeable. Confirm the QFN package, exposed-pad connection, temperature grade, AEC-Q100 qualification, Flash configuration, and peripheral differences for the exact replacement. A family-level statement of pin-for-pin compatibility does not guarantee identical behavior when pin multiplexing, clock sources, ADC channels, or legacy firmware depend on device-specific options.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The C8051F504-IM is described as AEC-Q100 qualified and tested for enhanced temperature operation up to 125 °C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration.

相关搜索

C8051F504-IM datasheet C8051F504-IM pinout C8051F504-IM datasheet pdf C8051F504-IM replacement C8051F504-IM equivalent C8051F504-IM vs C8051F501-IM C8051F504-IM price C8051F504-IM stock Silicon Labs C8051F504-IM C8051F504 48-QFN pinout C8051F504-IM automotive microcontroller C8051F504-IM CAN LIN controller

相关元器件 & 术语

Silicon Labs C8051F504-IM C8051F504-IMR C8051F504-IQ C8051F501-IM C8051F500-IM C8051F50x C8051F51x C8051F58x C8051F59x 8051 core 8-bit microcontroller mixed-signal MCU embedded microcontroller semiconductor 50 MHz 50 MIPS 32 KB Flash 4.25 KB RAM 12-bit ADC CAN 2.0 LIN 2.1 SPI UART I2C AEC-Q100 48-QFN QFN package family surface mount SMD in-system programming automotive electronics industrial automation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情