Texas Instruments

CD4029BK3 - 4-Bit CMOS Up/Down Counter | Texas Instruments

MPN: CD4029BK3 ✓ 啟用中
5 V to 18 V Vdss 16-lead DFP (CDFP16) Package 2 MHz Speed
MOQ: 1 |

CD4029BK3 概覽

The Texas Instruments CD4029BK3 is a 4-bit synchronous, positive-edge-triggered CMOS binary counter with bidirectional counting, available in a 16-lead DFP package. It operates from 5 V to 18 V, supports temperatures from -55°C to 125°C, and has a listed maximum frequency of 2 MHz. The counter provides separate preset and load inputs for loading an initial count and for parallel data entry.

A CMOS up/down counter is a sequential logic device that increments or decrements its four-bit output on each active clock edge. The direction of counting is selected by a dedicated up/down control, allowing the same counter to count upward, count downward, or stop when the direction input is held in the inactive state. Within the broader electronics hierarchy, the CD4029BK3 belongs to the CMOS 4000 Series of counters, dividers, and arithmetic logic functions.

Key characteristics include four binary counter outputs, preset capability for parallel loading, and operation across a wide 5 V to 18 V supply range. Its positive-edge-triggered architecture makes the counting action occur in response to a rising clock transition. The wide operating-temperature range makes the device suitable for industrial, instrumentation, telecommunications, and legacy control systems where extended environmental capability is required.

The CD4029BK3 operates from the original CD4000 CMOS logic family, whose design uses complementary MOSFET stages rather than bipolar transistor logic. CMOS counters can provide low static power consumption, high noise immunity, and broad supply-voltage operation compared with earlier fixed-voltage TTL implementations. These properties make the device useful when counting events must remain reliable across varying supply conditions or noisy industrial environments.

Typical uses include programmable sequencing, timing and event-counting systems, frequency division, industrial control logic, laboratory instrumentation, and test equipment. The four counter outputs can be decoded into a larger sequence of control states, while the preset and load functions allow a system to start from a programmed value or acquire a parallel-loaded count.

When designing around the CD4029BK3, verify the truth table for the direction, clock, preset, and load controls before connecting external logic. Account for supply decoupling and the propagation delay of the CMOS logic path when determining the maximum usable counting rate in a particular system. Use the manufacturer's pin-description table to assign board traces because the DFP lead assignment must follow the exact package drawing.

This page organizes the device specifications, functional characteristics, sourcing information, compatible-product references, and practical design guidance into one engineering-focused reference. It also distinguishes the verified CD4029BK3 data from package and pin details that require confirmation against the manufacturer documentation.

直接替換替代品,適用於 CD4029BK3 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: CD4029BK3 (相同外形與佔位) — 差異在於 Counting Direction, Logic Family, Package.

Harris Corporation
Counting Direction: Up or down
Logic Family: CMOS
Package: 16-CFP
比較對象 CD4029BK3 →

CD4029BK

✅ 直接替換
Harris Corporation
📦 16-lead CFP
4-bit binary up/down counter · CMOS · 4 bits · Up or down · Positive edge · Supported · 1 element · 16-CFP

聯絡詢價

查看資料表 →

CD4029BK/3

✅ 直接替換
📦 16-lead CFP
Same CD4029BK/3 family designation and bidirectional counter function; exact package dimensions and qualification attributes are not stated in the listing

📋 參考替代品(不在目錄中)

5962R9562101V9A

✅ 直接替換
📦 16-lead DFP/CFP
Functional up/down-counter counterpart with the same 16-lead package class; package dimensions and terminal mapping require confirmation against the manufacturer drawings

📋 參考替代品(不在目錄中)

CD4029BK3 最大額定值與電氣特性

Counter Type 4-bit binary up/down counter
Logic Family CD4000 series CMOS
Number of Bits 4 bit
Counting Direction Bidirectional up/down
Triggering Edge Positive edge
Operating Mode Synchronous
Supply Voltage Range 5 V to 18 V
Maximum Frequency 2 MHz
工作溫度範圍 -55°C to 125°C
Number of Terminals 16
封裝 16-lead DFP (CDFP16)
安裝類型 Surface mount

CD4029BK3 16-lead dfp (cdfp16) 腳位配置指南

CD4029BK3(16-lead dfp (cdfp16) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

CD4029BK3 的 16-lead dfp (cdfp16) 封裝腳位圖

無詳細腳位定義資料: CD4029BK3.

請參閱 資料表 以查看完整腳位配置。

典型應用

CD4029BK3 適用於 6 應用s: Programmable Industrial Sequencing, Frequency Division and Event Counting, Laboratory Timing and Measurement, Process Control Retain/Count Logic, Legacy Telecommunications Control, Automated Test Equipment State Control.

🏭

Programmable Industrial Sequencing

The CD4029BK3 suits programmable sequencing because its four counter outputs can advance through up to 16 decoded states while a dedicated direction input selects counting up or down. The synchronous, positive-edge-triggered operation keeps state changes aligned with the system clock, and the preset and load functions allow a sequence to begin from a programmed count rather than zero. Its 5 V to 18 V supply range provides useful flexibility in industrial control cabinets, while the -55°C to 125°C rating covers extended-temperature equipment. Verify the control-input truth table and preset priority before sequencing sensitive actuators.

🔧

Frequency Division and Event Counting

CD4029BK3 can divide an incoming event stream into a lower-rate count or accumulate pulses from a sensor, encoder, or timer. The 2 MHz listed maximum frequency provides a useful ceiling when checking clock-source margin, while the actual operating rate must remain below the level needed for the receiving logic to settle. Bidirectional operation allows the same block to count toward a threshold or back down from a preset value. Use a clean clock source and account for propagation delay when the counted events must be captured at a precise system boundary.

📡

Laboratory Timing and Measurement

The CD4029BK3 fits legacy laboratory timing and measurement equipment that requires a four-bit binary state counter with preset capability. Its CMOS implementation supports operation across a 5 V to 18 V supply range, and its -55°C to 125°C specification is useful in temperature-controlled instrument enclosures. The counter outputs can drive range selectors, timing gates, or multiplex decode logic. When designing a new instrument around this device, verify legacy signal levels and available board area because the 16-lead DFP package differs from common modern dual in-line counter packages.

⚙️

Process Control Retain/Count Logic

In process-control equipment, CD4029BK3 can count recipe steps, valve transitions, or completed machine cycles. Preset and parallel-load controls allow a sequence to restart at a defined point, while bidirectional counting supports both forward process phases and reverse recovery sequences. The wide supply range is helpful in mixed legacy control boards, but input and output thresholds must be checked against the attached TTL or CMOS devices. The counter should remain in a defined direction state during reset and load operations to prevent unintended state changes.

🌐

Legacy Telecommunications Control

CD4029BK3 is applicable to legacy telecommunications equipment requiring a synchronous bidirectional counter for timing, channel sequencing, or control-word generation. Its 5 V to 18 V operating range and broad temperature rating support older line-card environments where supply rails and enclosure temperatures vary. The four binary outputs can be decoded to produce timing enables or channel-selection strobes. Because legacy telecommunications boards commonly combine multiple logic technologies, verify signal compatibility, unused-input states, and reset behavior at the board level before releasing a replacement.

🖥️

Automated Test Equipment State Control

CD4029BK3 can implement test-sequence step counting and programmable timing windows in automated test equipment. A preset count lets the tester begin at a selected step, and the four outputs can be decoded into fixture-control or measurement-enable signals. The 2 MHz listed maximum frequency supports relatively fast state sequencing, although fixture relays and measurement acquisition cycles usually determine the practical rate. Keep drive currents within each output's specified limit and use decoupling near the device when long control traces connect to the counter.

What is the CD4029BK3 and what does it do?
The CD4029BK3 is a 4-bit synchronous, positive-edge-triggered CMOS up/down counter with bidirectional counting. According to the manufacturer datasheet information, it uses separate up/down control, clock, preset, load, and four counter-output functions in a 16-lead DFP package. It is intended for programmable sequencing, event counting, timing, frequency division, and industrial control logic.
What is the supply voltage range of the CD4029BK3?
The CD4029BK3 operates from 5 V to 18 V. The manufacturer datasheet information identifies it as a CD4000-series CMOS counter, allowing operation across a broad supply range rather than a single fixed rail. Designers should still verify input and output logic-level limits, decoupling requirements, and the absolute maximum supply rating in the manufacturer documentation before finalizing a design.
What is the maximum frequency of the CD4029BK3 counter?
The CD4029BK3 is listed with a maximum frequency of 2 MHz in the device specifications for the 5 V to 18 V operating range. This rating describes the counter's switching capability rather than the usable clock rate of every external system. Actual system margin depends on clock quality, propagation delay, fan-out, supply voltage, temperature, and the settling requirements of the circuits driven by the four counter outputs.
Where can I download the CD4029BK3 datasheet PDF?
The CD4029BK3 datasheet is available through the manufacturer product document at the Texas Instruments literature page. The same document family also appears through Intersil and Harris Semiconductor result pages because the device originated in the CD4000 CMOS series. Use the pin-description table, recommended operating conditions, and truth tables in that document when assigning PCB traces and designing control logic.
Where can I find the CD4029BK3 pinout?
The CD4029BK3 pinout is identified in the manufacturer's CD4029B datasheet, which documents the 16-terminal DFP package used by this device. Use the package drawing and terminal-description table together because the counter's clock, direction, preset, load, data, output, and supply functions must be mapped exactly to the package orientation. The public component listings identify the package as DFP or CDFP16.
How do the clock, up/down, preset, and load controls work?
The CD4029BK3 changes its four-bit count on a positive clock edge and uses its dedicated control inputs to select counting direction, preset a starting value, or load parallel data. The exact active levels and precedence among these controls are defined by the CD4029B truth table. Check that table in the manufacturer documentation when combining the counter with a microcontroller, decoder, or other synchronous logic.
What is the difference between CD4029BK3 and CD4029BK?
CD4029BK3 and CD4029BK are members of the same CD4029B counter family, but the orderable suffixes distinguish their qualification, package, or sourcing variants rather than the core counting function. CD4029BK3 is associated with the 16-lead DFP listing, while CD4029BK appears in a 16-CFP listing. Confirm package dimensions, temperature grade, qualification level, and pin mapping before treating either suffix as a drop-in replacement.
What is the best drop-in replacement for CD4029BK3?
The closest verified drop-in candidate is CD4029BK from the same CD4029B family because it uses a 16-lead CFP package and retains the same 4-bit bidirectional counter function. Nevertheless, confirm the DFP body dimensions, lead pitch, terminal orientation, temperature range, and qualification requirements before substitution. The Request a Quote form on this page can be used to request sourcing support for the exact suffix.
Can I replace CD4029BK3 with a 5962R9562101V9A counter?
The 5962R9562101V9A is identified by a comparison listing as a Renesas counterpart to the CD4029BK3, but that listing does not establish identical package dimensions or terminal assignment. It should not be treated as a confirmed drop-in replacement without checking the body size, lead pitch, pinout, supply range, timing, and environmental qualification. Use it as a functional-reference candidate rather than an automatic substitution.
When should I choose CD4029BK3 instead of a TTL up/down counter?
Choose the CD4029BK3 when a design benefits from its 5 V to 18 V supply range, CMOS low-power behavior, bidirectional counting, and -55°C to 125°C operating rating. A TTL counter can be preferable when existing system logic is already 5 V TTL and an exact TTL pinout is required. For mixed CMOS and TTL interfaces, verify every input threshold and output level rather than relying only on supply-voltage compatibility.
Is CD4029BK3 suitable for industrial timing and sequencing systems?
Yes, CD4029BK3 is suitable for industrial timing and sequencing systems that require a 4-bit bidirectional counter, a 5 V to 18 V supply range, and operation from -55°C to 125°C. Its positive-edge-triggered synchronous counting and parallel preset or load functions support programmable state sequences. Industrial qualification requirements should still be checked against the specific ordering variant and system standards.
What can replace the CD4029BK3 counter?
CD4029BK is the most direct verified candidate because it belongs to the same CD4029B family and appears in a 16-lead CFP package. It may be board-compatible only after confirming the physical DFP dimensions and pin mapping. The CD4029BK/3 ordering notation also appears under National Semiconductor, while the 5962R9562101V9A is a functional comparison candidate rather than a confirmed pin-compatible substitute.
Is CD4029BK3 the same as CD4029BK?
CD4029BK3 and CD4029BK share the core CD4029B 4-bit CMOS up/down-counter function, but they are not automatically identical orderable parts. Package body dimensions, lead arrangement, operating-temperature grade, qualification, and sourcing conditions can vary with the suffix. Treat CD4029BK as a drop-in candidate only after comparing it with the manufacturer package drawing and terminal table for CD4029BK3.
Where can I buy CD4029BK3 and check its availability?
Use the Request a Quote form on this page to request the current CD4029BK3 unit availability, volume breaks, and lead time for the exact 16-lead DFP ordering suffix. Availability for legacy CD4000-series devices can vary by qualification level and stocking status. Specify the required package, temperature range, and quantity so the request can be matched to the correct supply channel.
What is the price of CD4029BK3?
The current CD4029BK3 quotation is handled through the Request a Quote form on this page because legacy CMOS counter pricing depends on quantity, package, temperature grade, and current stocking. Submit the required quantity and target sourcing conditions with the request. The form provides a direct way to obtain current commercial terms without relying on a static price that may not match the requested configuration.
What are the key specifications engineers should know about CD4029BK3?
The CD4029BK3 is a 4-bit synchronous, positive-edge-triggered CMOS binary up/down counter with bidirectional counting, a 5 V to 18 V supply range, a 2 MHz listed maximum frequency, and operation from -55°C to 125°C. It is packaged as a 16-lead DFP or CDFP16 device. Its preset and parallel-load functions support programmable sequencing in industrial, timing, and test-equipment systems.

工程參考資料,適用於 CD4029BK3 — 比較、設計指引及合規資訊。

選型指南

Choose CD4029BK3 when the design needs a four-bit synchronous counter that can count in either direction, accept a preset or parallel-loaded value, and operate across a 5 V to 18 V supply range. Its -55°C to 125°C rating also makes it appropriate for extended-temperature legacy equipment. Choose CD4029BK or CD4029BK/3 when the same CD4029B function and 16-lead package class are required and the exact suffix qualification matches the design; verify mechanical drawings before release. Consider the Renesas 5962R9562101V9A only after confirming its package, pinout, timing, and environmental ratings because the available comparison establishes functional similarity rather than complete drop-in equivalence. For new systems, confirm that the DFP package, counter speed, and CMOS logic levels fit the board rather than selecting solely by counter function.

與替代品比較

參數 本產品 CD4029BK CD4029BK/3 5962R9562101V9A
Brand Texas Instruments Texas Instruments Texas Instruments Renesas Electronics
Package 16-lead DFP (CDFP16) 16-lead CFP 16-lead CFP 16-lead DFP/CFP
Counter Function 4-bit binary up/down counter 4-bit binary up/down counter 4-bit up/down counter Bidirectional counter
Terminal Count 16 16 16 16

主要差異化特點

  • Broad legacy CMOS supply and temperature capability (對比5962R9562101V9A)
  • Bidirectional counting with program loading (對比SN74LS93DR)
  • Multi-level counting in a 16-lead package (對比SN74LS90DR)

設計說明

Do not substitute the counter solely from the function description. Confirm the 16-lead DFP body dimensions, lead pitch, terminal numbering, and pin names against the manufacturer package drawing. The CD4029BK and CD4029BK/3 listings share the counter family and 16-lead package class, but suffix conventions can identify different qualification levels, temperature grades, or sourcing variants.

Place a supply bypass capacitor close to the device and route the power and ground connections carefully to minimize switching noise on this CMOS counter. Keep clock, preset, and load traces away from sensitive analog nodes. Because the published operating range extends from 5 V to 18 V, use the manufacturer's recommended operating conditions rather than assuming that every timing and logic specification remains constant across the full range.

Check the counter's propagation delay against the receiving circuit's setup and hold requirements. The published 2 MHz maximum frequency is not a promise that every board can clock the device at that rate; long traces, slow output loads, temperature, and supply voltage can reduce available margin. Use a defined clock source and leave control inputs in known states during normal operation to avoid spurious count transitions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The device is a legacy CD4000-series CMOS logic IC, and no explicit RoHS, REACH, halogen-free, or conflict-minerals declarations are stated in the available product information. AEC-Q100 is not applicable because the device is not listed as an automotive-qualified variant.

相關搜尋

CD4029BK3 datasheet CD4029BK3 datasheet pdf CD4029BK3 pinout CD4029BK3 equivalent CD4029BK3 replacement CD4029BK3 drop-in replacement CD4029BK3 16 pin DFP CD4029BK3 up down counter CD4029BK3 5V 18V CD4029BK3 price CD4029BK3 stock Texas Instruments CD4029BK3 CD4029BK3 vs 5962R9562101V9A CD4029BK3 vs CD4029BK CD4029BK3 industrial sequencing

相關元件與詞彙

Texas Instruments CD4029BK3 CD4029BK CD4029BK/3 5962R9562101V9A CD4029B CD4000 series CMOS logic up/down counter binary counter synchronous counter positive-edge triggered bidirectional counting preset counter parallel loading DFP package CDFP16 16-lead surface-mount package logic IC counter IC industrial sequencing frequency division event counting programmable timing legacy control systems
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情