CY8C3246LTI-156 50MHz 64KB 8-bit MCU | Infineon
MPN: CY8C3246LTI-156 ✓ 啟用中CY8C3246LTI-156 概覽
A programmable system-on-chip, or PSoC, combines a microcontroller core with programmable analog and digital peripheral blocks on one integrated circuit. The CY8C3246LTI-156 belongs to the PSoC 3 family and is based on an 8-bit 8051-compatible processing platform. This architecture allows designers to configure input and output behavior, timing, interrupts, serial communication, and other control functions through registers and firmware rather than relying only on fixed discrete peripheral functions. The 50 MHz clock rate provides the execution bandwidth required for responsive control loops and connected embedded products.
The key headline characteristics are the 50 MHz operating frequency, 64 KB flash memory, and 1.71 V to 5.5 V operating-voltage range. The flash memory provides a practical on-chip repository for firmware, configuration data, and application constants. The wide low-voltage supply range supports integration into 1.8 V, 3.3 V, and 5 V systems when the associated board-level requirements are satisfied. The 68-pin QFN package also supports compact layouts with exposed pad thermal management, provided that the PCB assembly process follows the manufacturer’s land-pattern and reflow requirements.
The PSoC architecture is useful when a product needs more than a basic fixed-function microcontroller. Analog and digital blocks can be configured to implement sensing, signal conditioning, timing, control, communications, and human-interface functions. This can reduce the number of external discrete components in compact products such as industrial controls, consumer equipment, communications modules, and low-power embedded systems. Firmware determines the final peripheral configuration, so application development should include register configuration, interrupt handling, and validation of the selected clock and signal paths.
The 8051-compatible 8-bit architecture is most appropriate for control-oriented applications where compact code size, deterministic behavior, and flexible peripheral configuration matter more than high computational throughput. The 50 MHz clock rate supports general-purpose embedded tasks, while the 64 KB flash capacity helps accommodate application firmware and configuration tables. Designers should still verify the required peripheral blocks, memory map, package pin availability, and timing requirements against the manufacturer datasheet before committing a design to this device.
A practical design consideration is to assign board functions only after confirming the peripheral-sharing requirements of the selected PSoC configuration. The 68-pin QFN package provides access to numerous signal and power connections, but the usable GPIO set depends on the active peripheral functions and the package-specific pin assignments. Layout planning should preserve the exposed-pad connection, provide appropriate supply decoupling, and keep sensitive analog and digital paths separated where the application circuit requires low-noise behavior.
This product page combines the published MPN specifications, package information, source links, structured alternatives, and practical selection guidance for engineers evaluating the CY8C3246LTI-156 in embedded-control designs.
直接替換替代品,適用於 CY8C3246LTI-156 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CY8C3246LTI-149
✅ 直接替換聯絡詢價
查看資料表 →CY8C3246LTI-156 最大額定值與電氣特性
| Device Type | 8-bit microcontroller |
| Product Family | PSoC 3 |
| Processor Architecture | 8051-compatible |
| 最大時脈頻率 | 50 MHz |
| Flash Memory | 64 KB |
| Operating Voltage Range | 1.71 V to 5.5 V |
| 封裝 | 68-pin QFN |
| Package Dimensions | 8 x 8 mm |
| 安裝類型 | Surface mount |
| Manufacturer | Cypress Semiconductor |
| 品牌 | Infineon Technologies |
| Data Bus Architecture | 8-bit |
| Memory Organization | 64K x 8 |
CY8C3246LTI-156 8 x 8 mm 腳位配置指南
CY8C3246LTI-156(8 x 8 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CY8C3246LTI-156.
請參閱 資料表 以查看完整腳位配置。
典型應用
CY8C3246LTI-156 適用於 6 應用s: Industrial Control Panels, Consumer Appliance Controls, Connected Sensor Hubs, Communication Equipment, Battery-Powered IoT Devices, Test and Measurement Instruments.
Industrial Control Panels
The CY8C3246LTI-156 fits compact industrial control panels that coordinate digital inputs, status indicators, operator interfaces, and timing functions. Its 50 MHz 8051-compatible processor provides responsive task handling, while 64 KB flash supports control firmware and configuration data. The programmable PSoC peripheral architecture can consolidate functions that otherwise require several discrete controllers. Design work should begin by mapping required signals to the 68-pin QFN pin table, then confirm that each peripheral configuration leaves adequate GPIO and clock resources. The 1.71 V to 5.5 V range accommodates common low-voltage control rails, but the exact temperature grade, isolation strategy, protection requirements, and qualification status must be checked before production use.
Consumer Appliance Controls
The CY8C3246LTI-156 can serve as the central controller in a connected appliance that manages buttons, displays, sensors, relays, and communication interfaces. Its 50 MHz processing rate and 64 KB flash are suitable for embedded supervisory logic and configurable peripheral functions. PSoC configurability can reduce the component count for compact product variants that require different sensor timing or interface behavior. Engineering teams should partition functions in firmware, avoid overloading shared peripheral resources, and reserve external protection for inductive or high-energy loads. The low-voltage operating range supports 1.8 V, 3.3 V, and 5 V product architectures when every connected device uses compatible signal levels.
Connected Sensor Hubs
The CY8C3246LTI-156 is appropriate for compact sensor hubs that aggregate digital measurements and transmit them through a configured serial interface. Its 8-bit 8051-compatible core can execute acquisition control, filtering, diagnostics, and protocol handling, while the PSoC 3 peripheral blocks add flexible timing and signal routing. The 50 MHz clock supports responsive interrupt-driven operation without requiring a larger processor. Designers should verify analog signal conditioning, external sensor excitation requirements, clock accuracy, and communication pin assignments in the datasheet. The 68-pin QFN footprint saves board area, although careful exposed-pad layout and thermal design are necessary to maintain reliable assembly and operating performance.
Communication Equipment
The CY8C3246LTI-156 can be used in communication and networking equipment that needs deterministic control beside a configurable peripheral subsystem. The 50 MHz 8051-compatible processor is suitable for protocol handling, timeout management, status monitoring, and low-level configuration, while 64 KB flash holds application code and configuration tables. The 1.71 V to 5.5 V range permits integration across several common rail families. For network products, engineers should confirm the required UART, SPI, USB, or other interface availability for the selected PSoC configuration and check package pins for dedicated functions. EMI-conscious layout, solid reference-plane design, and validated termination networks are essential when external communication ports are present.
Battery-Powered IoT Devices
The CY8C3246LTI-156 can support low-power IoT products that periodically wake to read sensors, update state, and transmit information. Its configurable PSoC architecture allows designers to select only the timing, digital, and analog functions required by the application, which can simplify low-power validation. The 64 KB flash capacity provides room for firmware and working data, while the 50 MHz clock permits short, deterministic processing bursts. Actual battery life depends on the selected peripheral configuration, clock plan, sleep strategy, sensor load, and radio behavior. Engineers should measure current in every operating mode and confirm the exact package and temperature ordering codes for the intended deployment environment.
Test and Measurement Instruments
The CY8C3246LTI-156 is suitable for embedded measurement instruments that need configurable acquisition timing, calibration storage, user-interface control, and data logging. Its 50 MHz processing core can coordinate sequences while the programmable PSoC resources adapt to different input and output requirements. With 64 KB flash, firmware can implement control loops, calibration tables, and communication protocols within one device. The 1.71 V to 5.5 V supply range supports integration into multi-rail laboratory equipment. Design teams should separate sensitive analog routing from switching and digital return currents, verify the required converter accuracy and acquisition bandwidth, and use the manufacturer’s timing specifications when setting measurement intervals and communication baud rates.
工程參考資料,適用於 CY8C3246LTI-156 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CY8C3246LTI-149 |
|---|---|---|
| Package | 68-pin QFN (8 x 8 mm) | 68-pin QFN (8 x 8 mm) |
| Brand | Infineon Technologies | Infineon Technologies |
| Device Type | 8-bit PSoC 3 microcontroller | 8-bit PSoC 3 microcontroller |
| Processor Architecture | 8051-compatible | 8051-compatible |
| Maximum Clock Frequency | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB |
| Data Width | 8-bit | 8-bit |
| Memory Organization | 64K x 8 | 64K x 8 |
主要差異化特點
- Matches the verified candidate in core processing capacity (對比CY8C3246LTI-149)
- Matches the verified candidate in flash capacity (對比CY8C3246LTI-149)
- Uses the same PSoC 3 and 8051-compatible platform (對比CY8C3246LTI-149)
設計說明
Use the manufacturer’s 68-pin QFN land pattern and exposed-pad layout rather than adapting a generic QFN footprint. Place the input and output decoupling capacitors close to their associated power pins, connect the exposed thermal pad through the specified via arrangement, and keep sensitive analog routing away from high-current switching paths. The 1.71 V to 5.5 V operating range does not by itself determine the correct number or voltage rating of decoupling capacitors.
Design the supply network for the highest applicable clock, peripheral, and I/O configuration rather than using idle current as the sizing criterion. Confirm startup, brownout behavior, and allowed supply ramp conditions in the manufacturer documentation. If the PSoC controls relays, actuators, or external radio hardware, use separate sequencing or load switches where required so rail transients do not destabilize the microcontroller.
Do not assume that every peripheral is simultaneously available in the chosen PSoC configuration. Build a resource-allocation table covering clocks, timers, serial interfaces, analog blocks, DMA paths, interrupts, and GPIO before schematic capture. Also verify that the -156 ordering code’s suffix-specific timing and grade requirements are acceptable; a package-compatible candidate is not automatically a lifecycle- or qualification-compatible substitute.
合規資訊
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated for this exact ordering code in the manufacturer and distributor descriptions. Confirm the current declarations for the exact MPN before production release.