CY8C3446LTI-075 - 50MHz 64KB Flash 8-Bit MCU | Infineon
MPN: CY8C3446LTI-075 ✓ 啟用中CY8C3446LTI-075 概覽
A programmable system-on-chip is a microcontroller architecture that integrates conventional CPU, memory, programmable digital blocks, analog blocks, and communication peripherals into one device. The PSoC 3 family belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. Its programmable resources allow peripheral functions to be adapted at design time while retaining the familiar embedded software-development model.
The CY8C3446LTI-075 provides 64 KB of flash for program storage, 8 KB of SRAM for working memory, and operation up to 50 MHz. Its listed interfaces include I2C, SPI, UART, USART, EBI/EMI, and USB. The 48-QFN package supports compact, space-constrained designs while exposing 25 I/O according to the product listing. Its 1.8 V to 5.5 V operating range accommodates both 3.3 V and 5 V system environments.
The 8051-compatible instruction set supports a broad embedded-software ecosystem, while the PSoC architecture adds configurable digital and analog functions rather than relying entirely on fixed peripherals. The 50 MHz operating limit provides additional processing headroom for control loops, communication handling, and state-machine workloads. Designers must still observe the electrical, clock, decoupling, and exposed-pad requirements specified in the manufacturer datasheet.
Typical uses include industrial control modules, consumer interfaces, USB-connected accessories, serial bridges, compact sensor nodes, and embedded systems requiring several communication formats in one package. The combination of flash, SRAM, USB, and mixed serial interfaces is particularly useful when board space and component count are more important than high-performance 32-bit processing.
Place the decoupling capacitors close to the power and ground pins, provide a clean clock source, and connect the exposed thermal pad to the PCB ground plane according to the land-pattern guidance. Confirm pin multiplexing, USB electrical requirements, programming access, and the selected peripheral configuration before releasing the PCB layout.
This page combines the manufacturer product description with package, memory, interface, and ordering information, then adds practical selection, comparison, and implementation guidance for engineers evaluating the CY8C3446LTI-075 in embedded designs.
直接替換替代品,適用於 CY8C3446LTI-075 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品CY8C3446LTI-075 最大額定值與電氣特性
| Product Type | 8-bit programmable system-on-chip microcontroller |
| Product Family | PSoC 3 CY8C34xx |
| CPU Core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64 KB x 8 bits |
| SRAM | 8 KB |
| RAM Organization | 8 KB x 8 bits |
| 封裝 | 48-QFN, 7 mm x 7 mm |
| Package Type | QFN with exposed pad |
| 工作溫度範圍 | -40 °C to +85 °C |
| Operating Supply Voltage Range | 1.8 V to 5.5 V |
| Number of I/O Pins | 25 I/O |
| Serial Interfaces | I2C, SPI, UART, USART, USB |
| External Bus Interface | EBI/EMI |
| 安裝類型 | Surface mount |
| Shipping Format | Tray |
CY8C3446LTI-075 qfn with exposed pad 腳位配置指南
CY8C3446LTI-075(qfn with exposed pad 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CY8C3446LTI-075.
請參閱 資料表 以查看完整腳位配置。
典型應用
CY8C3446LTI-075 適用於 6 應用s: USB-to-Serial Embedded Controller, Industrial Sensor Interface Module, USB-C Accessory Controller, Compact Consumer Control Board, Communication Protocol Bridge, Low-Voltage Embedded Control Node.
USB-to-Serial Embedded Controller
The CY8C3446LTI-075 fits compact USB-to-serial products because its 8051-compatible core runs up to 50 MHz and the device includes USB, UART, USART, SPI, and I2C interfaces. Firmware can enumerate a USB connection while exchanging data with sensors or memory over the serial peripherals, avoiding a separate USB interface controller. The 64 KB flash stores the firmware and configuration tables, while 8 KB of SRAM supports protocol buffers and control state. Designers should reserve the correct USB pins, follow the device electrical requirements, and validate the exposed-pad layout before production.
推薦
Industrial Sensor Interface Module
The CY8C3446LTI-075 is appropriate for a compact industrial sensor module that must combine sensor conditioning, digital control, and external communications. Its PSoC 3 architecture provides programmable digital resources alongside an 8051-compatible CPU, while I2C and SPI can connect sensors and memory without adding multiple bridge devices. The specified 1.8 V to 5.5 V range supports low-voltage and 3.3 V designs, and the 48-QFN footprint limits board area. Firmware and configuration tables fit within 64 KB of flash, while 8 KB of RAM provides working space for sampling, filtering, and protocol management.
推薦
USB-C Accessory Controller
The CY8C3446LTI-075 can serve as the control microcontroller in a USB-C accessory or configuration adapter. USB support enables host communication, while UART or SPI can connect an identification or configuration controller to a local interface. The 50 MHz maximum core frequency supports protocol processing and application logic without a higher-power processor, and the 25-I/O device in a 48-QFN package leaves room for status indicators, buttons, and protection signals. Board implementation must account for USB routing, connector mechanics, supply negotiation, and the exact I/O multiplexing shown in the manufacturer pin table.
推薦
Compact Consumer Control Board
The CY8C3446LTI-075 works well in a compact consumer-control board where an 8-bit MCU must manage several low-speed interfaces without consuming excessive board area. Its 64 KB flash provides practical firmware storage, and the programmable PSoC resources can implement timers, state machines, and digital logic alongside the CPU. I2C and SPI support digital sensors and storage, while UART can simplify debugging or connection to a host processor. The 48-QFN package requires careful escape routing and exposed-pad grounding, and the 1.8 V to 5.5 V supply range allows integration with common low-voltage power trees.
推薦
Communication Protocol Bridge
The CY8C3446LTI-075 is suitable for a multi-protocol bridge that translates traffic between USB, UART, SPI, and I2C-connected equipment. The 8051-compatible core executes protocol state machines, while PSoC programmable resources can support timers and custom digital functions without requiring a separate programmable logic device. A maximum CPU frequency of 50 MHz provides response headroom, and the 64 KB flash and 8 KB SRAM are sufficient for compact firmware when buffering requirements are controlled. Pin multiplexing, interrupt priorities, bus timing, and signal conditioning must be planned before assigning the 25 available I/O functions.
推薦
Low-Voltage Embedded Control Node
The CY8C3446LTI-075 can serve as the central controller in a low-voltage embedded node combining local logic and several digital peripherals. Its 1.8 V to 5.5 V operating range provides flexibility in battery-derived and industrial power systems, while the 50 MHz 8051-compatible core handles control logic and communication tasks. The 64 KB of flash stores application firmware, and the 8 KB of SRAM supports packet processing or sampled data. Designers should use the manufacturer power and decoupling guidance, maintain compatible I/O voltage levels, and provide a reliable clock and programming interface for reliable field deployment.
推薦
工程參考資料,適用於 CY8C3446LTI-075 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Infineon Technologies |
| Package | 48-QFN, 7 mm x 7 mm |
| CPU Core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Operating Supply Voltage | 1.8 V to 5.5 V |
| Number of I/O Pins | 25 I/O |
| Interfaces | I2C, SPI, UART, USART, USB, EBI/EMI |
| Operating Temperature | -40 °C to +85 °C |
主要差異化特點
- High operating speed within an 8-bit PSoC architecture (對比CY8C3446LTI-073)
- Integrated multi-protocol connectivity (對比CY8C3446LTI-073)
- Compact integration with useful memory resources (對比CY8C3446LTI-073T)
設計說明
Use the manufacturer 48-QFN land pattern and exposed-pad recommendations exactly. Place input and bulk decoupling capacitors close to their associated power pins, provide a low-impedance ground plane, and connect the exposed pad to ground using the prescribed pad geometry. This arrangement limits supply transients and improves thermal performance in compact designs.
Plan USB, SPI, UART, and other high-speed or switching interfaces before finalizing the pin assignment. Keep clocks away from sensitive inputs, provide short return paths, and use the manufacturer guidance for external USB network components when USB is enabled. Continuous testing during schematic review helps prevent peripheral reassignment or footprint errors.
Do not assume that another order code with a similar CY8C3446 designation is electrically or pin compatible. Verify the ordering table, speed grade, temperature grade, package suffix, pin names, exposed-pad requirements, and USB implementation for every proposed substitute. Preserve the CY8C3446LTI-075 MPN in the production BOM unless the comparison has been completed against the manufacturer documentation.
Design the supply path for the device's 1.8 V to 5.5 V operating range and account for the voltage tolerance of every connected I/O. Use a regulator with appropriate transient response and stable output capacitance, and verify startup and brownout behavior across the complete temperature range. Decoupling requirements and permissible startup sequences should follow the manufacturer datasheet.
合規資訊
The available product information identifies a -40 °C to +85 °C operating range but does not state the requested compliance classifications.