DG412DY+ - 4-Channel SPST Analog Switch | Analog Devices
MPN: DG412DY+ ✓ 啟用中DG412DY+ 概覽
An analog switch is a semiconductor device that uses digital control signals to connect or disconnect analog paths. The DG412 family belongs to the analog-switch and multiplexer hierarchy, where an analog switch provides one selectable path, a multiplexer combines multiple paths, and a demultiplexer distributes one path among multiple destinations. CMOS implementations are widely used because they can combine low control-input current, broad signal-voltage handling, and compact integration.
The DG412DY+ uses improved low-on-resistance matching between switches, with a maximum matching difference of 3 ohm, and guaranteed on-resistance flatness across the signal range, with a maximum variation of 4 ohm. These characteristics reduce channel-to-channel gain and resistance errors when several switched paths feed precision measurement, test, signal-routing, or data-acquisition circuits. Break-before-make behavior prevents the two sides of a switch from being connected simultaneously during transition.
The device supports TTL-compatible control logic and single-supply operation. Its four SPST channels can be used independently to select test paths, route sensor outputs, disconnect external loads, or implement sample-and-hold isolation stages. The low-resistance matching and controlled switching behavior make it especially useful where adding resistance-induced error or inconsistent channel loading would degrade system accuracy.
When laying out the DG412DY+, place input and output traces away from fast digital control and clock nets to minimize capacitive coupling. Keep the analog paths short, use a continuous ground plane, and decouple the supply close to the device. Confirm that every switched signal remains inside the operating voltage range and that break-before-make timing satisfies the source and load requirements.
This page combines the manufacturer product information, distributor identifiers, pin-compatible comparison data, application guidance, and practical PCB considerations. It is intended to help engineers identify whether the DG412DY+ fits a routing design, how it compares with other switch families, and which constraints must be checked before PCB release.
直接替換替代品,適用於 DG412DY+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DG412DY+ (相同外形與佔位) — 差異在於 Switch Configuration, Package, On-Resistance.
ADG412
✅ 直接替換📋 參考替代品(不在目錄中)
DG412DY
✅ 直接替換📋 參考替代品(不在目錄中)
DG412DY
✅ 直接替換📋 參考替代品(不在目錄中)
DG412DY+ 最大額定值與電氣特性
| Number of Circuits | 4 circuits |
| Switch Configuration | 1:1 SPST |
| On-Resistance | 45 ohm |
| On-Resistance Matching Between Switches | 3 ohm maximum |
| On-Resistance Flatness Over Signal Range | 4 ohm maximum variation |
| Signal Conduction | Bidirectional |
| Switching Action | Break-before-make |
| Control Logic Compatibility | TTL-compatible |
| Supply Capability | Single-supply operation |
| 封裝 | 16-pin SOIC |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
| Analog Signal Maximum | +30 V |
| Analog Signal Minimum | 10 V |
| Production Status | Production |
DG412DY+ 16-pin soic 腳位配置指南
DG412DY+(16-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DG412DY+.
請參閱 資料表 以查看完整腳位配置。
典型應用
DG412DY+ 適用於 6 應用s: Precision Test-Signal Routing, Data-Acquisition Channel Isolation, Sensor Signal Multiplexing, Sample-and-Hold Front Ends, Automated Measurement Systems, External Load Disconnect Circuitry.
Precision Test-Signal Routing
The DG412DY+ fits four-channel precision test-signal routing because each SPST path can connect a test point, source, or load independently. Its 3 ohm maximum matching between switches helps limit channel-to-channel resistance differences, while 4 ohm maximum flatness variation reduces signal-dependent errors across the operating range. The 45 ohm on-resistance must be included in the complete impedance budget, especially for high-impedance sensors and low-amplitude measurements.
推薦
Data-Acquisition Channel Isolation
The DG412DY+ can isolate or reconnect individual data-acquisition inputs without introducing the substantial leakage associated with many mechanical relays. Four independent bidirectional SPST circuits provide flexible channel management, and break-before-make operation prevents direct contention during switching. The analog designer should account for the 45 ohm series resistance, control-input capacitance, and signal-dependent flatness when setting acquisition gain and settling requirements.
推薦
Sensor Signal Multiplexing
The DG412DY+ is suitable for routing outputs from multiple sensors into a shared amplifier or measurement channel when low resistance variation between switches is important. Bidirectional conduction accommodates source or drain configurations, while 3 ohm maximum on-resistance matching improves consistency among selected channels. The circuit must tolerate the added 45 ohm path resistance and should use short, guarded analog traces to minimize pickup and switching transients.
推薦
Sample-and-Hold Front Ends
In sample-and-hold front ends, the DG412DY+ can connect a sampled node to a high-impedance holding network and then isolate it for subsequent conversion. Break-before-make switching limits overlap between the sampled and isolated states, while four channels permit repeated sampling, hold, reset, and signal-selection arrangements. Care must be taken because the switch contributes 45 ohm on-resistance and finite switching time, both of which affect acquisition settling and sample-rate design.
推薦
Automated Measurement Systems
The DG412DY+ can provide programmable connectivity in automated measurement systems requiring four independent analog paths. Its TTL-compatible controls simplify coordination with test equipment, and the compact 16-pin SOIC package supports dense instrumentation designs. Matching and flatness specifications help avoid one switch path behaving materially differently from another, but the 45 ohm resistance must be calibrated into precision measurements where required.
推薦
External Load Disconnect Circuitry
The DG412DY+ can disconnect external loads, test fixtures, or sensitive subcircuits while preserving a common signal path. Four independent channels allow separate functions such as load isolation, fixture selection, and signal inhibition, with bidirectional conduction supporting conventional signal flow. Designers should verify the maximum analog-signal rating, control thresholds, switch capacitance, and off-state behavior before applying the device outside the manufacturer-specified operating conditions.
推薦
推薦產品摘要
工程參考資料,適用於 DG412DY+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADG412 | DG412DY | DG412DY |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Renesas Electronics | Vishay Intertechnology |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Number of Circuits | 4 circuits | 4 SPST switches | 4 circuits | 4 SPST switches |
| Switch Configuration | 1:1 SPST | 1:1 SPST | 1:1 | 1:1 |
主要差異化特點
- Improved channel-to-channel resistance matching (對比Renesas DG412DY)
- Documented signal-range resistance flatness (對比Vishay DG412DY)
- Analog Devices and Maxim Integrated sourcing path (對比ADG412)
設計說明
Route switched analog signals as short, direct traces on a continuous ground plane. Keep the DG412DY+ near the connector, sensor, or measurement node that it controls, and avoid running sensitive nodes beneath the digital control inputs. Place the supply bypass capacitor close to the device supply terminal, and ground the returned switching current through the shortest available path to minimize ground bounce and analog coupling.
Include the nominal 45 ohm on-resistance in the signal-path calculation, then verify settling against the control transition using the manufacturer's switching-time and capacitance information. The 3 ohm maximum matching and 4 ohm maximum flatness specifications help quantify differences between paths, but they do not remove the need to check source impedance, load capacitance, and available settling time. Use a high-impedance receiving stage when the added resistance cannot be tolerated.
Do not treat every DG412DY marking as an interchangeable source of the DG412DY+. The same shortened order code is associated with Analog Devices or Maxim Integrated, Renesas Electronics, and Vishay Intertechnology products. Before substitution, verify the manufacturer, exact suffix, 16-pin SOIC footprint, control polarity, supply limits, signal rating, on-resistance, and switching timing against the approved component specification.
Provide local supply decoupling and route the return current directly to the system ground plane. The DG412DY+ is a CMOS interface device rather than a high-power regulator, but its control transitions can disturb analog nodes through supply and ground impedance. Keep high-current return paths away from sensitive switched traces, and verify that supply-current limits remain valid for all four channels and every combination of control states.
合規資訊
Compliance declarations are not stated in the product and distributor records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact manufacturer and ordering code before release.