Analog Devices

DG412DY+ - 4-Channel SPST Analog Switch | Analog Devices

부품 번호: DG412DY+ ✓ 활성
Single-supply operation Vdss 45 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG412DY+ 개요

The Analog Devices DG412DY+ is an improved quad SPST CMOS analog switch with four independent circuits, 1:1 signal routing, 45 ohm on-resistance, and a 16-pin SOIC package. It is designed for precision analog-signal switching where each channel can connect a source node to one of two load nodes. Bidirectional conduction supports signal flow in either direction, while the four independent control inputs allow channel-by-channel routing.

An analog switch is a semiconductor device that uses digital control signals to connect or disconnect analog paths. The DG412 family belongs to the analog-switch and multiplexer hierarchy, where an analog switch provides one selectable path, a multiplexer combines multiple paths, and a demultiplexer distributes one path among multiple destinations. CMOS implementations are widely used because they can combine low control-input current, broad signal-voltage handling, and compact integration.

The DG412DY+ uses improved low-on-resistance matching between switches, with a maximum matching difference of 3 ohm, and guaranteed on-resistance flatness across the signal range, with a maximum variation of 4 ohm. These characteristics reduce channel-to-channel gain and resistance errors when several switched paths feed precision measurement, test, signal-routing, or data-acquisition circuits. Break-before-make behavior prevents the two sides of a switch from being connected simultaneously during transition.

The device supports TTL-compatible control logic and single-supply operation. Its four SPST channels can be used independently to select test paths, route sensor outputs, disconnect external loads, or implement sample-and-hold isolation stages. The low-resistance matching and controlled switching behavior make it especially useful where adding resistance-induced error or inconsistent channel loading would degrade system accuracy.

When laying out the DG412DY+, place input and output traces away from fast digital control and clock nets to minimize capacitive coupling. Keep the analog paths short, use a continuous ground plane, and decouple the supply close to the device. Confirm that every switched signal remains inside the operating voltage range and that break-before-make timing satisfies the source and load requirements.

This page combines the manufacturer product information, distributor identifiers, pin-compatible comparison data, application guidance, and practical PCB considerations. It is intended to help engineers identify whether the DG412DY+ fits a routing design, how it compares with other switch families, and which constraints must be checked before PCB release.

드롭인 대체품: DG412DY+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: DG412DY+ (동일 폼 팩터 및 풋프린트) — 차이점: Switch Configuration, Package, On-Resistance.

Analog Devices
Switch Configuration: 4 independent 1:1 SPST
Package: SOIC-16 (16-SOIC)
비교 대상: DG412DY+ →
Renesas Electronics
Switch Configuration: Quad SPST
On-Resistance: 20 ohm typical, 35 ohm maximum
비교 대상: DG412DY+ →

ADG412

✅ 드롭인
📦 16-pin SOIC
ADG412 is identified as a DG412 cross-reference; its exact suffix-specific on-resistance and timing values require verification against the DG412DY+ values of 45 ohm and 3 ohm maximum matching

📋 참조 대체품 (카탈로그에 없음)

DG412DY

✅ 드롭인
📦 16-pin SOIC
4-channel 1:1 SPST and 16-pin SOIC are retained; on-resistance is 35 ohm versus 45 ohm for DG412DY+, a 22% reduction

📋 참조 대체품 (카탈로그에 없음)

DG412DY

✅ 드롭인
📦 16-pin SOIC
4-channel 1:1 SPST and SOIC-16 are retained; distributor on-resistance is 35 ohm versus 45 ohm for DG412DY+, a 22% reduction

📋 참조 대체품 (카탈로그에 없음)

DG412DY+ 최대 정격 & 전기적 특성

Number of Circuits 4 circuits
Switch Configuration 1:1 SPST
On-Resistance 45 ohm
On-Resistance Matching Between Switches 3 ohm maximum
On-Resistance Flatness Over Signal Range 4 ohm maximum variation
Signal Conduction Bidirectional
Switching Action Break-before-make
Control Logic Compatibility TTL-compatible
Supply Capability Single-supply operation
패키지 16-pin SOIC
실장 유형 Surface mount
동작 온도 범위 -40 °C to +85 °C
Analog Signal Maximum +30 V
Analog Signal Minimum 10 V
Production Status Production

DG412DY+ 16-pin soic 핀 구성 가이드

DG412DY+(16-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DG412DY+의 16-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DG412DY+.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DG412DY+ 적합 용도: 6 애플리케이션s: Precision Test-Signal Routing, Data-Acquisition Channel Isolation, Sensor Signal Multiplexing, Sample-and-Hold Front Ends, Automated Measurement Systems, External Load Disconnect Circuitry.

🔧

Precision Test-Signal Routing

The DG412DY+ fits four-channel precision test-signal routing because each SPST path can connect a test point, source, or load independently. Its 3 ohm maximum matching between switches helps limit channel-to-channel resistance differences, while 4 ohm maximum flatness variation reduces signal-dependent errors across the operating range. The 45 ohm on-resistance must be included in the complete impedance budget, especially for high-impedance sensors and low-amplitude measurements.

📊

Data-Acquisition Channel Isolation

The DG412DY+ can isolate or reconnect individual data-acquisition inputs without introducing the substantial leakage associated with many mechanical relays. Four independent bidirectional SPST circuits provide flexible channel management, and break-before-make operation prevents direct contention during switching. The analog designer should account for the 45 ohm series resistance, control-input capacitance, and signal-dependent flatness when setting acquisition gain and settling requirements.

🧩

Sensor Signal Multiplexing

The DG412DY+ is suitable for routing outputs from multiple sensors into a shared amplifier or measurement channel when low resistance variation between switches is important. Bidirectional conduction accommodates source or drain configurations, while 3 ohm maximum on-resistance matching improves consistency among selected channels. The circuit must tolerate the added 45 ohm path resistance and should use short, guarded analog traces to minimize pickup and switching transients.

⚡

Sample-and-Hold Front Ends

In sample-and-hold front ends, the DG412DY+ can connect a sampled node to a high-impedance holding network and then isolate it for subsequent conversion. Break-before-make switching limits overlap between the sampled and isolated states, while four channels permit repeated sampling, hold, reset, and signal-selection arrangements. Care must be taken because the switch contributes 45 ohm on-resistance and finite switching time, both of which affect acquisition settling and sample-rate design.

🏭

Automated Measurement Systems

The DG412DY+ can provide programmable connectivity in automated measurement systems requiring four independent analog paths. Its TTL-compatible controls simplify coordination with test equipment, and the compact 16-pin SOIC package supports dense instrumentation designs. Matching and flatness specifications help avoid one switch path behaving materially differently from another, but the 45 ohm resistance must be calibrated into precision measurements where required.

🔌

External Load Disconnect Circuitry

The DG412DY+ can disconnect external loads, test fixtures, or sensitive subcircuits while preserving a common signal path. Four independent channels allow separate functions such as load isolation, fixture selection, and signal inhibition, with bidirectional conduction supporting conventional signal flow. Designers should verify the maximum analog-signal rating, control thresholds, switch capacitance, and off-state behavior before applying the device outside the manufacturer-specified operating conditions.

추천 제품 요약

ADG412 Analog-switch family cross-reference for precision routing 사용처: Precision Test-Signal Routing, Data-Acquisition Channel Isolation, Sensor Signal Multiplexing, Sample-and-Hold Front Ends, Automated Measurement Systems, External Load Disconnect Circuitry DG412DY Same-family SPST routing switch 사용처: Precision Test-Signal Routing, Data-Acquisition Channel Isolation, Sensor Signal Multiplexing, Sample-and-Hold Front Ends, Automated Measurement Systems, External Load Disconnect Circuitry
What is the DG412DY+?
The DG412DY+ is an improved, four-channel SPST CMOS analog switch from Analog Devices, supplied in a 16-pin SOIC package. It provides four independent, bidirectionally conducting switch paths with 1:1 routing. According to the Analog Devices product page, on-resistance matching between switches is 3 ohm maximum and on-resistance flatness across the signal range is 4 ohm maximum, making the device suitable for precision analog routing.
What are the key specifications of DG412DY+ that engineers should know?
The DG412DY+ combines four independent 1:1 SPST switch circuits, 45 ohm on-resistance, bidirectional conduction, TTL-compatible control, and break-before-make switching in a 16-pin SOIC package. Analog Devices specifies on-resistance matching between switches at 3 ohm maximum and flatness variation at 4 ohm maximum. These figures are particularly important when multiple channels must contribute similar resistance and gain error to a precision signal path.
Where can I download the DG412DY+ datasheet PDF?
The official DG412DY+ datasheet is available through the Analog Devices DG412 product page at https://www.analog.com/en/products/dg412.html. The manufacturer page identifies the DG412 as a production, improved quad SPST analog-switch family and provides its data sheet and product-selection information. Use the pin-description table and electrical-characteristics tables in that document when assigning control inputs and verifying operating limits.
Where can I find the DG412DY+ pinout?
Use the pin-description diagram in the official Analog Devices DG412 data sheet to identify the 16 package terminals and the exposed-pad arrangement required by the selected SOIC footprint. The DG412DY+ is listed as a 16-pin SOIC device, but the complete terminal names are not reproduced on this page. Confirm the exact numbering against the manufacturer package drawing before assigning PCB nets or checking continuity.
What is the difference between DG412DY+ and DG412DY?
The DG412DY+ is the Maxim Integrated and Analog Devices ordering designation for the improved DG412-family device, while DG412DY listings also identify Vishay Siliconix and Renesas versions of the original DG412 family. The Analog Devices implementation uses a 45 ohm on-resistance listing, compared with 35 ohm in the Renesas and Vishay distributor records. Pin compatibility must therefore be confirmed electrically and mechanically rather than inferred only from the shortened family name.
Is DG412DY+ pin-compatible with ADG412?
ADG412-family devices are identified as common cross-references for DG412, but final replacement approval requires verification of the exact suffix, package, supply limits, control levels, on-resistance, and timing. The DG412DY+ is a 16-pin SOIC device with four SPST switches and 45 ohm on-resistance. Compare those requirements against the exact ADG412 ordering code before treating it as a drop-in replacement.
Can Renesas DG412DY replace Analog Devices DG412DY+?
The Renesas DG412DY is a strong candidate for replacement because it is also listed as a four-circuit, 1:1, 16-pin SOIC analog switch and belongs to the same DG412 family. Its distributor record lists 35 ohm on-resistance, which is 10 ohm lower than the DG412DY+ listing of 45 ohm. Before substitution, verify supply range, control logic, switching timing, on-resistance matching, and the exact footprint.
When should I choose DG412DY+ instead of Vishay DG412DY?
Choose the DG412DY+ when the design requires the improved Analog Devices or Maxim Integrated DG412 implementation and its documented matching and flatness behavior. The Vishay DG412DY listing states 35 ohm on-resistance, versus 45 ohm for the DG412DY+, so it may offer lower nominal resistance. The preferred part should be determined by complete electrical compatibility, production continuity, and qualification requirements rather than by on-resistance alone.
Is DG412DY+ suitable for precision test and measurement systems?
Yes, the DG412DY+ is suitable for precision test and measurement routing because it offers four independent SPST paths, bidirectional operation, 3 ohm maximum matching between switches, and break-before-make behavior. These features limit channel-to-channel inconsistency and prevent unintended path closure during transitions. The 45 ohm on-resistance must still be included in the total source, switch, and load resistance budget.
What should I consider when designing a PCB for DG412DY+?
Place the DG412DY+ close to the switched analog nodes, route input and output conductors away from high-speed digital nets, and maintain a continuous ground plane to reduce coupled noise. Keep supply decoupling at the device pins and use a solid ground reference for the switch signal paths. Confirm the exact 16-pin footprint, control polarity, operating voltage, and break-before-make interval against the manufacturer data sheet before fabrication.
What is the power and thermal impact of using DG412DY+?
The DG412DY+ is a CMOS analog switch rather than a power-conversion device, so its primary electrical burden is supply current and control-input behavior rather than power-stage dissipation. Exact supply-current and power-dissipation limits are not stated on this page. Use the manufacturer electrical-characteristics tables to calculate worst-case dissipation across the full supply voltage, control state, signal voltage, and temperature range.
Where can I buy DG412DY+ and check its availability?
Use the Request a Quote form on this page to request DG412DY+ availability, lead time, and an order quotation from XAIPART. The product is associated with Analog Devices or Maxim Integrated and is listed in a 16-pin SOIC package. Provide the exact suffix DG412DY+ when requesting the quote to avoid confusion with other manufacturers' DG412DY devices.
What is the price of DG412DY+?
Pricing for DG412DY+ is maintained through the Request a Quote form on this page rather than embedded in the technical description. Request a quote with the required quantity, shipment destination, and target delivery date for a current commercial response. Confirm the exact Analog Devices or Maxim Integrated DG412DY+ ordering code as part of the request.
What is the lead time for DG412DY+?
The current lead time for DG412DY+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package form, and inventory position, so it is not represented as a fixed figure in the product specifications. Include your production schedule and annual usage so the commercial response can reflect the required delivery plan.
Is DG412DY+ in stock and available for production?
Analog Devices identifies the DG412 family as being in production, while current order-by-quantity availability for the exact DG412DY+ suffix should be confirmed through the Request a Quote form. A production lifecycle designation indicates that the manufacturer continues to support the family, but it does not by itself guarantee inventory for a particular delivery date. Submit the required quantity and schedule for a current availability response.
What can replace the DG412DY+?
The most credible replacements are exact-family DG412DY devices from Renesas and Vishay because their listings identify four-channel, 1:1 SPST switches in 16-pin SOIC packages. An ADG412-family device is also identified as a common cross-reference. A replacement is not final until package, pin function, supply range, control thresholds, on-resistance, timing, and application-specific qualifications have all been checked.

엔지니어링 참조 데이터: DG412DY+ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DG412DY+ when a design needs four independent SPST paths in a 16-pin SOIC package and benefits from explicit on-resistance matching of 3 ohm maximum and signal-range flatness of 4 ohm maximum. Consider the Renesas or Vishay DG412DY when lower listed on-resistance of 35 ohm is valuable and the complete electrical characteristics, lifecycle status, and qualification requirements match the application. The ADG412 family is a plausible cross-reference for precision routing, but its exact suffix and electrical limits must be checked before PCB release. For all candidates, verify supply voltage, control thresholds, analog-signal range, switching time, pin functions, and footprint. Use the part whose documented behavior best matches the system error budget rather than selecting solely by nominal on-resistance.

대체품과의 비교

파라미터 이 제품 ADG412 DG412DY DG412DY
Brand Analog Devices Analog Devices Renesas Electronics Vishay Intertechnology
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Number of Circuits 4 circuits 4 SPST switches 4 circuits 4 SPST switches
Switch Configuration 1:1 SPST 1:1 SPST 1:1 1:1

주요 차별점

  • Improved channel-to-channel resistance matching (vs Renesas DG412DY)
  • Documented signal-range resistance flatness (vs Vishay DG412DY)
  • Analog Devices and Maxim Integrated sourcing path (vs ADG412)

설계 노트

Route switched analog signals as short, direct traces on a continuous ground plane. Keep the DG412DY+ near the connector, sensor, or measurement node that it controls, and avoid running sensitive nodes beneath the digital control inputs. Place the supply bypass capacitor close to the device supply terminal, and ground the returned switching current through the shortest available path to minimize ground bounce and analog coupling.

Include the nominal 45 ohm on-resistance in the signal-path calculation, then verify settling against the control transition using the manufacturer's switching-time and capacitance information. The 3 ohm maximum matching and 4 ohm maximum flatness specifications help quantify differences between paths, but they do not remove the need to check source impedance, load capacitance, and available settling time. Use a high-impedance receiving stage when the added resistance cannot be tolerated.

Do not treat every DG412DY marking as an interchangeable source of the DG412DY+. The same shortened order code is associated with Analog Devices or Maxim Integrated, Renesas Electronics, and Vishay Intertechnology products. Before substitution, verify the manufacturer, exact suffix, 16-pin SOIC footprint, control polarity, supply limits, signal rating, on-resistance, and switching timing against the approved component specification.

Provide local supply decoupling and route the return current directly to the system ground plane. The DG412DY+ is a CMOS interface device rather than a high-power regulator, but its control transitions can disturb analog nodes through supply and ground impedance. Keep high-current return paths away from sensitive switched traces, and verify that supply-current limits remain valid for all four channels and every combination of control states.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations are not stated in the product and distributor records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact manufacturer and ordering code before release.

관련 검색

dg412dy datasheet DG412DY+ datasheet DG412DY+ pinout DG412DY+ SOIC-16 footprint DG412DY+ equivalent DG412DY+ replacement DG412DY+ drop-in replacement DG412DY+ vs Renesas DG412DY DG412DY+ on resistance matching DG412DY+ price DG412DY+ stock Analog Devices DG412DY+

관련 부품 & 용어

Analog Devices DG412DY+ DG412DY ADG412 Renesas Electronics Vishay Intertechnology quad SPST analog switch analog switch multiplexer demultiplexer CMOS switch on-resistance on-resistance matching on-resistance flatness break-before-make bidirectional conduction TTL-compatible control logic 16-pin SOIC SOIC package family surface-mount package precision test equipment data acquisition sample-and-hold RoHS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기