DS90LV110TMTC - 400MHz 1:10 LVDS Distributor | TI
MPN: DS90LV110TMTC ✓ 啟用中DS90LV110TMTC 概覽
An LVDS data and clock distributor is a clock-and-timing interface integrated circuit that accepts one differential input and generates multiple differential outputs. LVDS means low-voltage differential signaling, a method that transmits complementary signals through a balanced pair. In the electronic hierarchy, the DS90LV110TMTC is a clock buffer and fanout driver within clock and timing ICs, and more broadly it belongs to interface and signal-conditioning semiconductors used to distribute high-speed signals across a system.
The principal specifications are a 1:10 fanout ratio, a maximum operating frequency of 400 MHz, and ten differential transmitters. Manufacturer descriptions identify support for LVDS, CML, and PECL signaling, while the data paths are fully differential from input to output. The 28-TSSOP package uses a 0.173-inch body length and a 4.40 mm width, making the device suitable for compact backplane, instrumentation, communications, and test-equipment boards.
Because all ten outputs are driven from the same differential input, the device centralizes clock distribution and reduces the number of separate fanout stages required. This can simplify synchronization in systems that distribute a common timing reference to multiple endpoints. The differential signal path is intended to generate low noise and limit pulse-width distortion, while a 3.3 V supply supports integration with modern low-voltage digital systems.
Typical uses include synchronous backplane clock distribution, parallel data fanout, communication equipment, test-and-measurement systems, and industrial control electronics. A clock-distribution design can place the DS90LV110TMTC near the source clock and route controlled-length differential traces to several destination circuits. For data applications, the one-to-ten relationship allows one incoming differential stream to feed ten receivers when downstream logic requires identical copies.
The primary PCB concern is controlled-impedance routing of every LVDS pair. Each differential trace should maintain continuous reference-plane return paths, appropriate pair spacing, and consistent geometry. Input and output topology, termination, and bypass-capacitor placement should follow the manufacturer's recommended layout and application guidance rather than generic point-to-point wiring conventions.
This product page combines the confirmed distributor and manufacturer facts with package-focused selection guidance, practical distribution considerations, and verified same-family drop-in comparisons. It helps engineers distinguish the exact 28-TSSOP orderable from related processing and suffix options while preserving the required 1:10 fanout, 400 MHz operation, and differential signaling behavior.
直接替換替代品,適用於 DS90LV110TMTC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DS90LV110TMTC (相同外形與佔位) — 差異在於 Package, Product Type, Supply Voltage.
DS90LV110TMTC/NOPB
✅ 直接替換📋 參考替代品(不在目錄中)
DS90LV110ATMTX/NOPB
✅ 直接替換📋 參考替代品(不在目錄中)
DS90LV110ATMT
✅ 直接替換聯絡詢價
查看資料表 →DS90LV110TMTC 規格
| Product Type | LVDS data and clock distributor |
| Fanout Ratio | 1:10 |
| 最大時脈頻率 | 400 MHz |
| Differential Inputs | 1 input |
| Differential Outputs | 10 outputs |
| Number of Transmitters | 10 |
| Number of Receivers | 1 |
| 供應電壓 | 3.3 V |
| Supported Signaling Protocols | LVDS, CML, PECL |
| Signal Path | Fully differential from input to output |
| 封裝 | 28-TSSOP |
| Package Body Width | 4.40 mm |
| Package Body Length | 0.173 inch |
| 安裝類型 | Surface mount |
| Series | DS90LV110 |
DS90LV110TMTC 0.173 inch 腳位配置指南
DS90LV110TMTC(0.173 inch 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90LV110TMTC.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90LV110TMTC 適用於 6 應用s: Backplane Clock Distribution, Synchronous Data Fanout, Communications Equipment Timing, Test and Measurement Systems, Industrial Control Electronics, Parallel Processing Data Distribution.
Backplane Clock Distribution
The DS90LV110TMTC fits centralized backplane timing because one differential clock can feed ten destinations at up to 400 MHz. Its fully differential input-to-output architecture supports low-noise transfer and low pulse-width distortion, which are valuable when a system must preserve edge relationships across multiple branches. Place the distributor near the source clock, route equal-length LVDS pairs to receivers, and maintain a continuous reference plane beneath every pair. The one-to-ten fanout reduces the number of separate distribution stages, but the final design must still be checked for loss, skew, jitter, receiver thresholds, and termination rather than treating equal trace length as the only timing requirement.
推薦
Synchronous Data Fanout
The DS90LV110TMTC can replicate one differential data stream to ten receivers when multiple parallel blocks require the same information. Its 1:10 ratio, 400 MHz operating limit, and ten differential transmitters provide a direct fanout structure without ten external drivers. The signal path remains differential from input to output, supporting low-noise operation and controlled pulse-width distortion. Designers should compare receiver setup and hold timing, confirm that all ten endpoints accept the same data phase, and use the manufacturer's electrical characteristics to establish source and termination requirements. Skew tolerance between branches must be analyzed at the destination device rather than inferred from the distributor's maximum frequency.
推薦
Communications Equipment Timing
The DS90LV110TMTC is suitable for communications equipment that requires a low-noise differential timing reference distributed across several functional blocks. One input and ten outputs provide a compact fanout arrangement, while operation up to 400 MHz covers demanding clock trees and data paths. LVDS, CML, and PECL signaling support allows the device to sit within compatible interface ecosystems. Implementation should preserve differential symmetry, avoid splits or stubs on high-speed pairs, and place termination exactly where the electrical interface requires it. For systems with redundant or asynchronous domains, use independent enable or source-selection control outside the distributor rather than assuming the ten outputs can be switched independently.
推薦
Test and Measurement Systems
The DS90LV110TMTC can provide a common differential trigger or sampling-clock reference to ten instrument sections within a test system. The ten-output fanout helps synchronize acquisition, conversion, processing, and communication blocks without requiring a separate buffer at every destination. Its fully differential signal path is useful when low noise and low pulse-width distortion are central to measurement integrity. Route the source and outputs as controlled-impedance LVDS pairs, maintain return paths, and account for cable or fixture delay when interpreting time-domain results. Verify probe loading and receiver capability because high measurement-bandwidth endpoints may require a separate low-capacitance distribution arrangement.
推薦
Industrial Control Electronics
The DS90LV110TMTC fits industrial control electronics that distribute a high-speed differential clock or command stream across multiple controllers, converters, or monitoring sections. Its 1:10 ratio and 400 MHz capability provide a straightforward centralized fanout, while differential signaling supports noise-resistant interconnects in electrically demanding environments. Keep the distributor close to the source when timing is critical and provide an uninterrupted ground reference beneath each pair. Validate the total system budget for component tolerance, connector loss, cable skew, grounding, and environmental coupling. For safety-related or highly regulated designs, also verify the qualification status and operating-temperature limits of the selected ordering option.
推薦
Parallel Processing Data Distribution
The DS90LV110TMTC can fan one differential source into ten parallel receiver channels in processing systems where every channel needs the same command or timing information. With a 400 MHz operating limit and ten differential outputs, it provides a compact distribution stage between a central controller and distributed endpoints. The fully differential architecture minimizes common-mode disturbance and supports low-noise signal transfer. Confirm that the source edge rate, output amplitude, and common-mode voltage meet receiver requirements, and use matched geometry to limit skew between channels. If outputs must carry independent commands, additional multiplexing or channel-specific drivers are required because all ten outputs reproduce the same input.
推薦
推薦產品摘要
工程參考資料,適用於 DS90LV110TMTC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90LV110TMTC/NOPB | DS90LV110ATMTX/NOPB | DS90LV110ATMT |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Function | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor |
| Fanout Ratio | 1:10 | 1:10 | 1:10 | 1:10 |
| Ordering Suffix | TMTC | TMTC/NOPB | ATMTX/NOPB | ATMT |
主要差異化特點
- Single input can feed ten differential destinations (對比DS90LV110ATMTX/NOPB)
- Direct 400 MHz clock distribution (對比DS90LV110TMTC/NOPB)
- Multi-protocol differential interface support (對比DS90LV110ATMT)
設計說明
Route every LVDS input and output as a controlled-impedance differential pair over a continuous reference plane. Maintain constant pair spacing and avoid stubs, test pads, vias, and copper changes that create discontinuities. The distributor's 400 MHz rating applies to supported electrical conditions, so the complete source-to-destination path must also satisfy impedance, loss, and return-path requirements. Check the manufacturer pinout and recommended layout before assigning signals and power.
Treat the source amplitude, common-mode voltage, receiver thresholds, and edge rate as one complete interface. The DS90LV110TMTC supports LVDS, CML, and PECL signaling, but those modes do not automatically use identical terminations or voltage levels. Confirm the selected mode from the manufacturer electrical-characteristic tables and preserve differential symmetry through connectors and vias. This avoids reflections or duty-cycle distortion from mismatched branches.
Do not assume that equal-length traces alone guarantee equal timing at the destinations. Account for output-to-output skew, source jitter, receiver tolerance, connector and via delay, and the difference in downstream loads. Ten outputs also create ten branches that must each terminate correctly; leaving unused outputs unterminated can reflect energy into the device. Follow the manufacturer's unused-output and termination guidance for the exact operating configuration.
合規資訊
The /NOPB ordering codes identify lead-free processing for the related orderables, but the exact DS90LV110TMTC compliance declarations require confirmation from the manufacturer product page or datasheet.