Texas Instruments

DS90LV110TMTC - 400MHz 1:10 LVDS Distributor | TI

MPN: DS90LV110TMTC ✓ فعال
3.3 V Vdss 28-TSSOP Package 400 MHz Speed
MOQ: 1 |

DS90LV110TMTC جائزہ

Texas Instruments DS90LV110TMTC is a 1-to-10 LVDS data and clock distributor operating up to 400 MHz, with one differential input, ten differential outputs, and a 28-TSSOP package measuring 4.40 mm in body width. The device is designed for high-speed point-to-point distribution of differential clock or data signals while preserving low-noise and low-pulse-width-distortion behavior.

An LVDS data and clock distributor is a clock-and-timing interface integrated circuit that accepts one differential input and generates multiple differential outputs. LVDS means low-voltage differential signaling, a method that transmits complementary signals through a balanced pair. In the electronic hierarchy, the DS90LV110TMTC is a clock buffer and fanout driver within clock and timing ICs, and more broadly it belongs to interface and signal-conditioning semiconductors used to distribute high-speed signals across a system.

The principal specifications are a 1:10 fanout ratio, a maximum operating frequency of 400 MHz, and ten differential transmitters. Manufacturer descriptions identify support for LVDS, CML, and PECL signaling, while the data paths are fully differential from input to output. The 28-TSSOP package uses a 0.173-inch body length and a 4.40 mm width, making the device suitable for compact backplane, instrumentation, communications, and test-equipment boards.

Because all ten outputs are driven from the same differential input, the device centralizes clock distribution and reduces the number of separate fanout stages required. This can simplify synchronization in systems that distribute a common timing reference to multiple endpoints. The differential signal path is intended to generate low noise and limit pulse-width distortion, while a 3.3 V supply supports integration with modern low-voltage digital systems.

Typical uses include synchronous backplane clock distribution, parallel data fanout, communication equipment, test-and-measurement systems, and industrial control electronics. A clock-distribution design can place the DS90LV110TMTC near the source clock and route controlled-length differential traces to several destination circuits. For data applications, the one-to-ten relationship allows one incoming differential stream to feed ten receivers when downstream logic requires identical copies.

The primary PCB concern is controlled-impedance routing of every LVDS pair. Each differential trace should maintain continuous reference-plane return paths, appropriate pair spacing, and consistent geometry. Input and output topology, termination, and bypass-capacitor placement should follow the manufacturer's recommended layout and application guidance rather than generic point-to-point wiring conventions.

This product page combines the confirmed distributor and manufacturer facts with package-focused selection guidance, practical distribution considerations, and verified same-family drop-in comparisons. It helps engineers distinguish the exact 28-TSSOP orderable from related processing and suffix options while preserving the required 1:10 fanout, 400 MHz operation, and differential signaling behavior.

کے لیے ڈراپ اِن متبادل DS90LV110TMTC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DS90LV110TMTC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, Supply Voltage.

Texas Instruments
Package: 28-pin TSSOP (PW)
Product Type: 1-to-10 LVDS data and clock distributor
Supply Voltage: 3 V
موازنہ کریں DS90LV110TMTC →

DS90LV110TMTC/NOPB

✅ ڈراپ-اِن
📦 28-TSSOP
Lead-free processing designation differs; 400 MHz rating, 1:10 fanout, and 28-TSSOP package remain identical

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV110ATMTX/NOPB

✅ ڈراپ-اِن
📦 28-TSSOP
Alternate suffix and lead-free designation; documented 1:10 distribution, 10 transmitters, 1 receiver, and 28-TSSOP package are unchanged

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV110ATMT

✅ ڈراپ-اِن
Texas Instruments
📦 28-TSSOP
1-to-10 LVDS data and clock distributor · 1:10 · 200 MHz · 145 ps · 160 mA · 3 V · -40°C to +85°C · LVDS differential signaling

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

DS90LV110TMTC تفصیلات

Product Type LVDS data and clock distributor
Fanout Ratio 1:10
زیادہ سے زیادہ کلاک فریکوئنسی 400 MHz
Differential Inputs 1 input
Differential Outputs 10 outputs
Number of Transmitters 10
Number of Receivers 1
سپلائی وولٹیج 3.3 V
Supported Signaling Protocols LVDS, CML, PECL
Signal Path Fully differential from input to output
پیکیج 28-TSSOP
Package Body Width 4.40 mm
Package Body Length 0.173 inch
ماؤنٹنگ ٹائپ Surface mount
Series DS90LV110

DS90LV110TMTC 0.173 inch پن کنفیگریشن گائیڈ

DS90LV110TMTC (0.173 inch پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

DS90LV110TMTC کے لیے 0.173 inch پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DS90LV110TMTC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

DS90LV110TMTC کے لیے موزوں ہے 6 ایپلیکیشنs: Backplane Clock Distribution, Synchronous Data Fanout, Communications Equipment Timing, Test and Measurement Systems, Industrial Control Electronics, Parallel Processing Data Distribution.

🖥️

Backplane Clock Distribution

The DS90LV110TMTC fits centralized backplane timing because one differential clock can feed ten destinations at up to 400 MHz. Its fully differential input-to-output architecture supports low-noise transfer and low pulse-width distortion, which are valuable when a system must preserve edge relationships across multiple branches. Place the distributor near the source clock, route equal-length LVDS pairs to receivers, and maintain a continuous reference plane beneath every pair. The one-to-ten fanout reduces the number of separate distribution stages, but the final design must still be checked for loss, skew, jitter, receiver thresholds, and termination rather than treating equal trace length as the only timing requirement.

🌐

Synchronous Data Fanout

The DS90LV110TMTC can replicate one differential data stream to ten receivers when multiple parallel blocks require the same information. Its 1:10 ratio, 400 MHz operating limit, and ten differential transmitters provide a direct fanout structure without ten external drivers. The signal path remains differential from input to output, supporting low-noise operation and controlled pulse-width distortion. Designers should compare receiver setup and hold timing, confirm that all ten endpoints accept the same data phase, and use the manufacturer's electrical characteristics to establish source and termination requirements. Skew tolerance between branches must be analyzed at the destination device rather than inferred from the distributor's maximum frequency.

🌐

Communications Equipment Timing

The DS90LV110TMTC is suitable for communications equipment that requires a low-noise differential timing reference distributed across several functional blocks. One input and ten outputs provide a compact fanout arrangement, while operation up to 400 MHz covers demanding clock trees and data paths. LVDS, CML, and PECL signaling support allows the device to sit within compatible interface ecosystems. Implementation should preserve differential symmetry, avoid splits or stubs on high-speed pairs, and place termination exactly where the electrical interface requires it. For systems with redundant or asynchronous domains, use independent enable or source-selection control outside the distributor rather than assuming the ten outputs can be switched independently.

🔧

Test and Measurement Systems

The DS90LV110TMTC can provide a common differential trigger or sampling-clock reference to ten instrument sections within a test system. The ten-output fanout helps synchronize acquisition, conversion, processing, and communication blocks without requiring a separate buffer at every destination. Its fully differential signal path is useful when low noise and low pulse-width distortion are central to measurement integrity. Route the source and outputs as controlled-impedance LVDS pairs, maintain return paths, and account for cable or fixture delay when interpreting time-domain results. Verify probe loading and receiver capability because high measurement-bandwidth endpoints may require a separate low-capacitance distribution arrangement.

🏭

Industrial Control Electronics

The DS90LV110TMTC fits industrial control electronics that distribute a high-speed differential clock or command stream across multiple controllers, converters, or monitoring sections. Its 1:10 ratio and 400 MHz capability provide a straightforward centralized fanout, while differential signaling supports noise-resistant interconnects in electrically demanding environments. Keep the distributor close to the source when timing is critical and provide an uninterrupted ground reference beneath each pair. Validate the total system budget for component tolerance, connector loss, cable skew, grounding, and environmental coupling. For safety-related or highly regulated designs, also verify the qualification status and operating-temperature limits of the selected ordering option.

⚡

Parallel Processing Data Distribution

The DS90LV110TMTC can fan one differential source into ten parallel receiver channels in processing systems where every channel needs the same command or timing information. With a 400 MHz operating limit and ten differential outputs, it provides a compact distribution stage between a central controller and distributed endpoints. The fully differential architecture minimizes common-mode disturbance and supports low-noise signal transfer. Confirm that the source edge rate, output amplitude, and common-mode voltage meet receiver requirements, and use matched geometry to limit skew between channels. If outputs must carry independent commands, additional multiplexing or channel-specific drivers are required because all ten outputs reproduce the same input.

تجویز کردہ پروڈکٹس کا خلاصہ

DS90LV110ATMTX/NOPB Same-family 1:10 LVDS distributor alternative استعمال ہوتا ہے: Backplane Clock Distribution, Communications Equipment Timing, Test and Measurement Systems, Parallel Processing Data Distribution DS90LV019TMTC Related Texas Instruments LVDS distribution family استعمال ہوتا ہے: Backplane Clock Distribution, Communications Equipment Timing, Parallel Processing Data Distribution DS90LV110TMTC/NOPB Lead-free ordering form of the same distributor استعمال ہوتا ہے: Synchronous Data Fanout, Test and Measurement Systems, Industrial Control Electronics DS90LV110ATMT Texas Instruments استعمال ہوتا ہے: Synchronous Data Fanout, Industrial Control Electronics
What is the DS90LV110TMTC?
The DS90LV110TMTC is a Texas Instruments 1-to-10 LVDS data and clock distributor packaged in a 28-TSSOP. It accepts one differential input and provides ten differential outputs, with operation up to 400 MHz. According to the manufacturer product page, the DS90LV110T family uses fully differential data paths for low-noise operation and low pulse-width distortion.
What are the key specifications of DS90LV110TMTC that engineers should know?
The DS90LV110TMTC combines a 1:10 fanout ratio, 400 MHz maximum clock frequency, ten differential outputs, and a 3.3 V supply in a 28-TSSOP package. Manufacturer descriptions identify LVDS, CML, and PECL signaling support. The package body is 4.40 mm wide and 0.173 inch long, and the data paths remain differential from the input through all outputs.
Where can I download the DS90LV110TMTC datasheet PDF?
The DS90LV110TMTC datasheet and ordering information are available through the official Texas Instruments DS90LV110T product page at https://www.ti.com/product/DS90LV110T. The exact suffix identifies the 28-TSSOP ordering option. Use the manufacturer's datasheet tab for the PDF, pin descriptions, recommended application circuit, and electrical-characteristic tables before finalizing a PCB design.
Where can I find the DS90LV110TMTC pinout?
The DS90LV110TMTC pin assignments are shown in the pin-configuration section of the Texas Instruments manufacturer datasheet for the DS90LV110T family. The exact device uses a 28-TSSOP package with one differential input and ten differential outputs. Assign PCB nets from that pin table because signal and power pin locations must match the documented package orientation rather than a generic TSSOP drawing.
What can replace the DS90LV110TMTC?
The closest documented same-family drop-in choices are DS90LV110TMTC/NOPB and DS90LV110ATMTX/NOPB in the 28-TSSOP package. The latter is described as a complete replacement with consistent terminals, package, and principal performance characteristics. The DS90LV110ATMT also appears in a direct package-compatible comparison. Request a Quote for current availability of the exact replacement suffix.
Is DS90LV110TMTC the same as DS90LV110TMTC/NOPB?
The DS90LV110TMTC and DS90LV110TMTC/NOPB share the 1-to-10 LVDS distribution function, 400 MHz frequency, 28-TSSOP package, and one differential input with ten differential outputs. The /NOPB ordering code distinguishes lead-free processing rather than changing the core clock-distribution architecture. Confirm ordering nomenclature, marking, and procurement requirements before treating the suffix as interchangeable.
What is the best cross-brand equivalent for DS90LV110TMTC?
No cross-brand equivalent with verified pin compatibility, 28-TSSOP packaging, 1:10 fanout, and 400 MHz performance was identified for the DS90LV110TMTC. The documented alternatives are from Texas Instruments, including DS90LV110TMTC/NOPB, DS90LV110ATMTX/NOPB, and DS90LV110ATMT. A substitute from another manufacturer should not be used without a verified pin-for-pin datasheet comparison and signal-integrity review.
DS90LV110TMTC vs DS90LV110ATMTX/NOPB: which is better for LVDS clock distribution?
DS90LV110TMTC and DS90LV110ATMTX/NOPB both provide 1-to-10 distribution, ten transmitters, one receiver, 3.3 V operation, and a 28-TSSOP package. A direct comparison describes DS90LV110ATMTX/NOPB as a complete replacement with consistent terminals and package. Choose based on orderable suffix, availability, and required qualification rather than expecting a functional architecture change.
What is the difference between DS90LV110TMTC and DS90LV110ATMT?
Both devices occupy the 28-TSSOP package and implement 1-to-10 differential data or clock distribution with ten transmitters and one receiver. The documented comparison identifies consistent terminal and package characteristics. The meaningful selection criteria are therefore the exact orderable suffix, lifecycle and procurement status, device marking, and any customer-specific qualification requirements.
When should I choose DS90LV110TMTC over another DS90LV110 option?
Choose DS90LV110TMTC when the design requires the standard 28-TSSOP ordering option for 1-to-10 LVDS distribution up to 400 MHz. Select DS90LV110TMTC/NOPB when the specified processing designation is required, or consider DS90LV110ATMTX/NOPB when it is the approved procurement form. Confirm pin mapping, supply sequencing, termination, and qualification for every variant.
Is DS90LV110TMTC suitable for high-speed backplane clock distribution?
The DS90LV110TMTC is suitable for a high-speed fanout function when the design can use one differential source and ten destination branches at up to 400 MHz. Its fully differential path supports low-noise signaling and low pulse-width distortion. Suitability still depends on trace impedance, insertion loss, skew tolerance, termination, receiver capability, and the clock's required jitter and fanout limits.
Where can I buy DS90LV110TMTC online?
Use the Request a Quote form on this page to request the DS90LV110TMTC and confirm current stock, lead time, and order quantity. The device is identified in distributor listings as a 28-TSSOP, 400 MHz, 1-to-10 clock fanout buffer. The form lets you specify the exact suffix and quantity without relying on a static price or availability claim.
What is the price of DS90LV110TMTC?
Use the Request a Quote form on this page for the current DS90LV110TMTC quotation, quantity breaks, and order conditions. The request should specify the 28-TSSOP MPN, target quantity, and required delivery date. Quote requests allow the order to be matched to the requested configuration and current component supply.
What is the lead time for DS90LV110TMTC?
The current lead time for DS90LV110TMTC should be confirmed through the Request a Quote form on this page. Include the required quantity, shipment destination, target date, and whether DS90LV110TMTC/NOPB is acceptable as an alternate orderable suffix. A specific delivery commitment can then be tied to the requested production schedule.
Does DS90LV110TMTC require level translation for LVDS clock signals?
The DS90LV110TMTC is an LVDS, CML, and PECL-compatible distributor rather than a general-purpose voltage-level translator. It accepts one differential input and produces ten differential outputs, with fully differential paths from input to output. Confirm source amplitude, common-mode voltage, termination, receiver thresholds, and edge-rate compatibility against the manufacturer electrical characteristics before using it as a clock interface.

کے لیے انجینئرنگ ریفرنس ڈیٹا DS90LV110TMTC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose DS90LV110TMTC for a 28-TSSOP design requiring one differential input, ten differential outputs, operation up to 400 MHz, and support for LVDS, CML, or PECL signaling. Select DS90LV110TMTC/NOPB when the lead-free processing designation is required while retaining the same 28-TSSOP footprint and core distribution function. Consider DS90LV110ATMTX/NOPB when it is the approved alternate ordering form and its documentation confirms the required electrical and qualification details. DS90LV110ATMT is another package-compatible family option, but suffix-specific lifecycle, marking, and qualification requirements should be checked. Because no cross-brand drop-in candidate was confirmed, do not substitute another manufacturer's distributor solely on matching fanout and frequency. First optimize the board-level clock topology, then use the Request a Quote form to confirm the exact suffix, quantity, and lead time.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ DS90LV110TMTC/NOPB DS90LV110ATMTX/NOPB DS90LV110ATMT
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-TSSOP 28-TSSOP 28-TSSOP 28-TSSOP
Function 1-to-10 LVDS data and clock distributor 1-to-10 LVDS data and clock distributor 1-to-10 LVDS data and clock distributor 1-to-10 LVDS data and clock distributor
Fanout Ratio 1:10 1:10 1:10 1:10
Ordering Suffix TMTC TMTC/NOPB ATMTX/NOPB ATMT

اہم امتیازی خصوصیات

  • Single input can feed ten differential destinations (بمقابلہDS90LV110ATMTX/NOPB)
  • Direct 400 MHz clock distribution (بمقابلہDS90LV110TMTC/NOPB)
  • Multi-protocol differential interface support (بمقابلہDS90LV110ATMT)

ڈیزائن نوٹس

Route every LVDS input and output as a controlled-impedance differential pair over a continuous reference plane. Maintain constant pair spacing and avoid stubs, test pads, vias, and copper changes that create discontinuities. The distributor's 400 MHz rating applies to supported electrical conditions, so the complete source-to-destination path must also satisfy impedance, loss, and return-path requirements. Check the manufacturer pinout and recommended layout before assigning signals and power.

Treat the source amplitude, common-mode voltage, receiver thresholds, and edge rate as one complete interface. The DS90LV110TMTC supports LVDS, CML, and PECL signaling, but those modes do not automatically use identical terminations or voltage levels. Confirm the selected mode from the manufacturer electrical-characteristic tables and preserve differential symmetry through connectors and vias. This avoids reflections or duty-cycle distortion from mismatched branches.

Do not assume that equal-length traces alone guarantee equal timing at the destinations. Account for output-to-output skew, source jitter, receiver tolerance, connector and via delay, and the difference in downstream loads. Ten outputs also create ten branches that must each terminate correctly; leaving unused outputs unterminated can reflect energy into the device. Follow the manufacturer's unused-output and termination guidance for the exact operating configuration.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The /NOPB ordering codes identify lead-free processing for the related orderables, but the exact DS90LV110TMTC compliance declarations require confirmation from the manufacturer product page or datasheet.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

DS90LV110TMTC datasheet DS90LV110TMTC pinout DS90LV110TMTC datasheet pdf DS90LV110TMTC equivalent DS90LV110TMTC replacement DS90LV110TMTC cross reference DS90LV110TMTC vs DS90LV110ATMTX/NOPB DS90LV110TMTC footprint DS90LV110TMTC 400MHz LVDS DS90LV110TMTC clock distributor DS90LV110TMTC price DS90LV110TMTC stock Texas Instruments DS90LV110TMTC DS90LV110TMTC 28-TSSOP pinout DS90LV110TMTC application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments DS90LV110TMTC DS90LV110TMTC/NOPB DS90LV110ATMTX/NOPB DS90LV110ATMT DS90LV019TMTC LVDS CML PECL low-voltage differential signaling clock fanout buffer data distributor clock and timing IC interface IC signal conditioning 28-TSSOP TSSOP package family surface-mount package differential signaling 400 MHz 1:10 fanout low pulse-width distortion 3.3 V backplane clock distribution
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں