DS90LV110TMTC - 400MHz 1:10 LVDS Distributor | TI
MPN: DS90LV110TMTC ✓ Hoạt độngDS90LV110TMTC Tóm tắt
An LVDS data and clock distributor is a clock-and-timing interface integrated circuit that accepts one differential input and generates multiple differential outputs. LVDS means low-voltage differential signaling, a method that transmits complementary signals through a balanced pair. In the electronic hierarchy, the DS90LV110TMTC is a clock buffer and fanout driver within clock and timing ICs, and more broadly it belongs to interface and signal-conditioning semiconductors used to distribute high-speed signals across a system.
The principal specifications are a 1:10 fanout ratio, a maximum operating frequency of 400 MHz, and ten differential transmitters. Manufacturer descriptions identify support for LVDS, CML, and PECL signaling, while the data paths are fully differential from input to output. The 28-TSSOP package uses a 0.173-inch body length and a 4.40 mm width, making the device suitable for compact backplane, instrumentation, communications, and test-equipment boards.
Because all ten outputs are driven from the same differential input, the device centralizes clock distribution and reduces the number of separate fanout stages required. This can simplify synchronization in systems that distribute a common timing reference to multiple endpoints. The differential signal path is intended to generate low noise and limit pulse-width distortion, while a 3.3 V supply supports integration with modern low-voltage digital systems.
Typical uses include synchronous backplane clock distribution, parallel data fanout, communication equipment, test-and-measurement systems, and industrial control electronics. A clock-distribution design can place the DS90LV110TMTC near the source clock and route controlled-length differential traces to several destination circuits. For data applications, the one-to-ten relationship allows one incoming differential stream to feed ten receivers when downstream logic requires identical copies.
The primary PCB concern is controlled-impedance routing of every LVDS pair. Each differential trace should maintain continuous reference-plane return paths, appropriate pair spacing, and consistent geometry. Input and output topology, termination, and bypass-capacitor placement should follow the manufacturer's recommended layout and application guidance rather than generic point-to-point wiring conventions.
This product page combines the confirmed distributor and manufacturer facts with package-focused selection guidance, practical distribution considerations, and verified same-family drop-in comparisons. It helps engineers distinguish the exact 28-TSSOP orderable from related processing and suffix options while preserving the required 1:10 fanout, 400 MHz operation, and differential signaling behavior.
Bộ thay thế dễ dàng lắp đặt cho DS90LV110TMTC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DS90LV110TMTC (cùng hình factor và footprint) — khác nhau ở Package, Product Type, Supply Voltage.
DS90LV110TMTC/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90LV110ATMTX/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90LV110ATMT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DS90LV110TMTC Thông số kỹ thuật
| Product Type | LVDS data and clock distributor |
| Fanout Ratio | 1:10 |
| Tần số xung maksimum | 400 MHz |
| Differential Inputs | 1 input |
| Differential Outputs | 10 outputs |
| Number of Transmitters | 10 |
| Number of Receivers | 1 |
| Điện áp cung cấp | 3.3 V |
| Supported Signaling Protocols | LVDS, CML, PECL |
| Signal Path | Fully differential from input to output |
| Hộp | 28-TSSOP |
| Package Body Width | 4.40 mm |
| Package Body Length | 0.173 inch |
| Kiểu lắp đặt | Surface mount |
| Series | DS90LV110 |
Hướng dẫn cấu hình chân DS90LV110TMTC 0.173 inch
Cấu hình chân cho DS90LV110TMTC (0.173 inch gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DS90LV110TMTC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DS90LV110TMTC phù hợp cho 6 Áp dụngs: Backplane Clock Distribution, Synchronous Data Fanout, Communications Equipment Timing, Test and Measurement Systems, Industrial Control Electronics, Parallel Processing Data Distribution.
Backplane Clock Distribution
The DS90LV110TMTC fits centralized backplane timing because one differential clock can feed ten destinations at up to 400 MHz. Its fully differential input-to-output architecture supports low-noise transfer and low pulse-width distortion, which are valuable when a system must preserve edge relationships across multiple branches. Place the distributor near the source clock, route equal-length LVDS pairs to receivers, and maintain a continuous reference plane beneath every pair. The one-to-ten fanout reduces the number of separate distribution stages, but the final design must still be checked for loss, skew, jitter, receiver thresholds, and termination rather than treating equal trace length as the only timing requirement.
Được đề xuất
Synchronous Data Fanout
The DS90LV110TMTC can replicate one differential data stream to ten receivers when multiple parallel blocks require the same information. Its 1:10 ratio, 400 MHz operating limit, and ten differential transmitters provide a direct fanout structure without ten external drivers. The signal path remains differential from input to output, supporting low-noise operation and controlled pulse-width distortion. Designers should compare receiver setup and hold timing, confirm that all ten endpoints accept the same data phase, and use the manufacturer's electrical characteristics to establish source and termination requirements. Skew tolerance between branches must be analyzed at the destination device rather than inferred from the distributor's maximum frequency.
Được đề xuất
Communications Equipment Timing
The DS90LV110TMTC is suitable for communications equipment that requires a low-noise differential timing reference distributed across several functional blocks. One input and ten outputs provide a compact fanout arrangement, while operation up to 400 MHz covers demanding clock trees and data paths. LVDS, CML, and PECL signaling support allows the device to sit within compatible interface ecosystems. Implementation should preserve differential symmetry, avoid splits or stubs on high-speed pairs, and place termination exactly where the electrical interface requires it. For systems with redundant or asynchronous domains, use independent enable or source-selection control outside the distributor rather than assuming the ten outputs can be switched independently.
Được đề xuất
Test and Measurement Systems
The DS90LV110TMTC can provide a common differential trigger or sampling-clock reference to ten instrument sections within a test system. The ten-output fanout helps synchronize acquisition, conversion, processing, and communication blocks without requiring a separate buffer at every destination. Its fully differential signal path is useful when low noise and low pulse-width distortion are central to measurement integrity. Route the source and outputs as controlled-impedance LVDS pairs, maintain return paths, and account for cable or fixture delay when interpreting time-domain results. Verify probe loading and receiver capability because high measurement-bandwidth endpoints may require a separate low-capacitance distribution arrangement.
Được đề xuất
Industrial Control Electronics
The DS90LV110TMTC fits industrial control electronics that distribute a high-speed differential clock or command stream across multiple controllers, converters, or monitoring sections. Its 1:10 ratio and 400 MHz capability provide a straightforward centralized fanout, while differential signaling supports noise-resistant interconnects in electrically demanding environments. Keep the distributor close to the source when timing is critical and provide an uninterrupted ground reference beneath each pair. Validate the total system budget for component tolerance, connector loss, cable skew, grounding, and environmental coupling. For safety-related or highly regulated designs, also verify the qualification status and operating-temperature limits of the selected ordering option.
Được đề xuất
Parallel Processing Data Distribution
The DS90LV110TMTC can fan one differential source into ten parallel receiver channels in processing systems where every channel needs the same command or timing information. With a 400 MHz operating limit and ten differential outputs, it provides a compact distribution stage between a central controller and distributed endpoints. The fully differential architecture minimizes common-mode disturbance and supports low-noise signal transfer. Confirm that the source edge rate, output amplitude, and common-mode voltage meet receiver requirements, and use matched geometry to limit skew between channels. If outputs must carry independent commands, additional multiplexing or channel-specific drivers are required because all ten outputs reproduce the same input.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DS90LV110TMTC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DS90LV110TMTC/NOPB | DS90LV110ATMTX/NOPB | DS90LV110ATMT |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Function | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor | 1-to-10 LVDS data and clock distributor |
| Fanout Ratio | 1:10 | 1:10 | 1:10 | 1:10 |
| Ordering Suffix | TMTC | TMTC/NOPB | ATMTX/NOPB | ATMT |
Bảo phân biệt quan trọng
- Single input can feed ten differential destinations (vsDS90LV110ATMTX/NOPB)
- Direct 400 MHz clock distribution (vsDS90LV110TMTC/NOPB)
- Multi-protocol differential interface support (vsDS90LV110ATMT)
Ghi chú thiết kế
Route every LVDS input and output as a controlled-impedance differential pair over a continuous reference plane. Maintain constant pair spacing and avoid stubs, test pads, vias, and copper changes that create discontinuities. The distributor's 400 MHz rating applies to supported electrical conditions, so the complete source-to-destination path must also satisfy impedance, loss, and return-path requirements. Check the manufacturer pinout and recommended layout before assigning signals and power.
Treat the source amplitude, common-mode voltage, receiver thresholds, and edge rate as one complete interface. The DS90LV110TMTC supports LVDS, CML, and PECL signaling, but those modes do not automatically use identical terminations or voltage levels. Confirm the selected mode from the manufacturer electrical-characteristic tables and preserve differential symmetry through connectors and vias. This avoids reflections or duty-cycle distortion from mismatched branches.
Do not assume that equal-length traces alone guarantee equal timing at the destinations. Account for output-to-output skew, source jitter, receiver tolerance, connector and via delay, and the difference in downstream loads. Ten outputs also create ten branches that must each terminate correctly; leaving unused outputs unterminated can reflect energy into the device. Follow the manufacturer's unused-output and termination guidance for the exact operating configuration.
Thông tin tuân thủ
The /NOPB ordering codes identify lead-free processing for the related orderables, but the exact DS90LV110TMTC compliance declarations require confirmation from the manufacturer product page or datasheet.