DSPIC33AK256MC506-E/M7 - 200MHz DSC FPU | Microchip
MPN： DSPIC33AK256MC506-E/M7 ✓ 啟用中DSPIC33AK256MC506-E/M7 概覽
A Digital Signal Controller (DSC) combines the processing power of a digital signal processor (DSP) with the versatility of a microcontroller (MCU). DSCs are embedded processors positioned between general-purpose MCUs and high-end DSPs, designed for real-time control applications requiring intensive mathematical computation such as motor control, digital power conversion, and advanced sensing.
Key features include high-speed 40 MSPS 12-bit ADCs, high-bandwidth 100 MHz op amps with low input voltage offset, high-speed PWMs, CAN-FD connectivity, and capacitive touch sensing. The device is functional safety (FuSa) compliant, supporting safety-oriented designs. The FPU accelerates single- and double-precision floating-point arithmetic, which is critical for control loop algorithms executing at high sample rates.
Architecturally, the dsPIC33A core is a single-core 32-bit design with a DSP engine supporting MAC operations, delivering deterministic real-time performance. The rich peripheral set includes multiple UART, SPI, I2C, CAN-FD modules, analog comparators, and a 12-bit DAC. The high-speed ADC and PWM peripherals form an ideal pair for tightly coupled real-time control loops in digital power and motor drive systems.
Typical applications include motor control (PMSM, BLDC, stepper), digital power conversion (SMPS, PFC, inverters), battery management systems, industrial automation, and advanced current, voltage, and temperature sensing. The 40 MSPS ADC and 100 MHz op amps enable precise signal acquisition without external analog front-end components.
Design tip: properly decouple all VDD pins and use the internal regulator for the core voltage. Use the multiple PGECx/PGEDx pin pairs for in-circuit serial programming (ICSP), and leverage the built-in self-test and ECC features for functional safety compliance. Pricing as of 2026-08-29.
直接替換替代品，適用於 DSPIC33AK256MC506-E/M7 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
DSPIC33AK256MC506-I/M7
✅ 直接替換📋 參考替代品（不在目錄中）
DSPIC33AK512MC506
✅ 直接替換📋 參考替代品（不在目錄中）
DSPIC33AK256MPS506
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33AK64MC105-E/M7
⚡ 相同封裝 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →DSPIC33AK256MC506-E/M7 最大額定值與電氣特性
| Core | 32-bit dsPIC33A single-core |
| Core Speed | 200 MHz |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| FPU | 32/64-bit Floating-Point Unit |
| ADC Resolution | 12-bit |
| ADC Sampling Rate | 40 MSPS |
| Integrated Op Amps | 100 MHz bandwidth, low input voltage offset |
| CAN Interface | CAN-FD |
| Touch Sensing | Yes |
| Functional Safety | FuSa-compliant |
| PWM | High-speed PWMs |
| 工作溫度 | -40C to +125C |
| 封裝 | 64-VQFN (9x9 mm) |
| 安裝類型 | Surface Mount |
| Programming | ICSP via PGECx/PGEDx pairs |
DSPIC33AK256MC506-E/M7 64-vqfn (9x9 mm) 腳位配置指南
DSPIC33AK256MC506-E/M7（64-vqfn (9x9 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： DSPIC33AK256MC506-E/M7.
請參閱 資料表 以查看完整腳位配置。
典型應用
DSPIC33AK256MC506-E/M7 適用於 6 應用s: PMSM/BLDC Motor Control, Digital Power Conversion (SMPS/PFC/Inverters), Battery Management Systems, Advanced Sensing and Signal Conditioning, Industrial Automation and HMI, Automotive Body Control and Auxiliary Systems.
PMSM/BLDC Motor Control
The DSPIC33AK256MC506-E/M7 fits motor control because its 40 MSPS 12-bit ADCs sample phase currents with sub-microsecond latency while the 200 MHz core and double-precision FPU execute field-oriented control (FOC) loops deterministically. High-speed PWMs provide fine duty resolution for inverter switching. Place the DSC between current-sense amplifiers and gate drivers, running the current loop at 20-50 kHz; the integrated 100 MHz op amps can condition shunt signals, reducing BOM cost versus an external analog front end.
推薦
Digital Power Conversion (SMPS/PFC/Inverters)
Digital power designs benefit from the DSC's tightly coupled ADC-PWM architecture: the 40 MSPS ADC captures input/output voltage and current instantly, and high-speed PWMs adjust duty cycles within one control cycle. The 200 MHz core with FPU handles nonlinear control laws and double-precision compensation math. FuSa compliance supports safety-relevant power stages. Typical usage: PFC or LLC control loops at 100-500 kHz switching frequency, with CAN-FD available for digital telemetry to system hosts.
推薦
Battery Management Systems
The 12-bit 40 MSPS ADCs and precision 100 MHz op amps enable accurate cell voltage and pack current measurement, while the FuSa-compliant architecture with ECC and self-test supports safety-critical BMS firmware. The 256KB Flash stores state-of-charge estimation algorithms, and CAN-FD connects to vehicle or inverter controllers. Operating from -40C to +125C covers battery pack environments. Trade-off: for high cell-count packs, pair with a dedicated battery monitor AFE for per-cell measurement.
推薦
Advanced Sensing and Signal Conditioning
Integrated 100 MHz bandwidth op amps with low input voltage offset condition sensor signals directly on-chip, and the 40 MSPS 12-bit ADCs digitize them without external amplifiers - a significant BOM and board-area saving. The double-precision FPU executes FFT and filtering algorithms for spectral analysis. Suitable for current, voltage, and temperature sensing nodes requiring fast, synchronized sampling; the touch-sensing module adds capacitive UI without extra ICs.
推薦
Industrial Automation and HMI
The combination of CAN-FD, multiple UART/SPI/I2C ports, and capacitive touch sensing makes this DSC a single-chip solution for industrial nodes that need both control and user interface. The 200 MHz core with FPU runs PID loops and communication stacks concurrently. Extended -40C to +125C temperature range suits factory floor environments. The FuSa compliance assists machine-safety subsystem designs requiring documented functional safety workflows.
推薦
Automotive Body Control and Auxiliary Systems
For automotive-adjacent subsystems, the DSC offers CAN-FD networking, touch sensing for capacitive buttons, and high-speed PWM for LED drivers and small motor loads, all in one 64-VQFN device. The -40C to +125C extended grade matches underhood-adjacent zones. While this standard part is not AEC-Q100 listed in provided data, its FuSa features and analog integration reduce system component count. Verify qualification status for your specific automotive program before release.
推薦
推薦產品摘要
工程參考資料，適用於 DSPIC33AK256MC506-E/M7 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DSPIC33AK256MC506-I/M7 | DSPIC33AK512MC506 | TMS320F280041C-Q1 |
|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | HTQFP-64 - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Texas Instruments |
| Core Speed | 200 MHz | 200 MHz | 200 MHz | 100 MHz |
| Flash Memory | 256 KB | 256 KB | 512 KB | 128 KB |
| FPU | 32/64-bit double precision | 32/64-bit | 32/64-bit | TMU + FPU32 |
主要差異化特點
- 40 MSPS 12-bit ADCs with on-chip 100 MHz op amps (對比TMS320F280041C-Q1)
- Double-precision (64-bit) FPU (對比TMS320F280041C-Q1)
- Extended temperature option with same die (對比DSPIC33AK256MC506-I/M7)
設計說明
Decouple all VDD pins with 0.1uF ceramic capacitors placed within 2mm of each pin, plus bulk capacitance at the board level. Use the internal regulator for core voltage - do not drive the core rail externally. Follow the Microchip power distribution guidelines in the dsPIC33A datasheet power section for capacitor values and layout.
For ICSP programming/debugging, use PGECx/PGEDx pins as matched pairs: if PGEC2 carries ICSPCLK, ICEDAT must be on PGED2. Route these traces away from PWM switching nodes to prevent corruption of in-circuit debug sessions. Connect all VSS and VDD pins during programming per NorthernSoftware dsPIC33AK support notes.
The 64-VQFN (9x9 mm) exposed pad should be soldered to a grounded copper pour for thermal dissipation - a 125C max junction with high switching PWM activity demands good thermal design. For functional safety use, enable the built-in self-test and ECC features in firmware initialization; they are not active by default in all configurations.
合規資訊
Compliance data not present in provided verified web data. FuSa (functional safety) compliant per Mouser listing. Verify RoHS/REACH status on Microchip product page.
