DSPIC33CK64MP502T-I/SS - 100MHz 64KB Flash DSC | Microchip
MPN： DSPIC33CK64MP502T-I/SS ✓ 啟用中DSPIC33CK64MP502T-I/SS 概覽
A digital signal controller combines the computational capability of a DSP with the peripheral set and ease of use of a microcontroller, sitting within the broader hierarchy of embedded processors: DSC -> microcontroller -> embedded MCU/SoC. The dsPIC33CK family executes a single-cycle MAC DSP engine alongside the 16-bit CPU, making it a common choice in the power-management and industrial-control semiconductor space.
Key features include the 100 MHz modified Harvard architecture core with DSP instruction extensions, dual-panel flash enabling live firmware updates, a 3.5 Msps 12-bit ADC pair, CAN-FD for automotive and industrial networks, and integrated op amps that reduce external component count in current-sense loops.
The MP variant adds two on-chip operational amplifiers and high-resolution PWM suitable for closed-loop power conversion. The dual-panel flash architecture allows firmware execution from one panel while erasing/programming the other, a significant advantage for field-updatable digital power products.
Typical applications include switch-mode power supplies, PFC stages, BLDC/PMSM motor drives, solar micro-inverters, and CAN-FD-connected industrial sensing nodes where deterministic interrupt latency and fast ADC sampling are critical.
Design consideration: the device operates from 3.0 V to 3.6 V, so a 3.3 V LDO or buck regulator is required; budget the 8 KB RAM carefully when using complex control loops with float math.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in a single manufacturer datasheet.
直接替換替代品，適用於 DSPIC33CK64MP502T-I/SS — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： DSPIC33CK64MP502T-I/SS （相同外形與佔位） — 差異在於 Package, Operating Temperature, PWM, ADC Resolution, Data RAM Size.
DSPIC33CK64MP502-I/SS
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33CK64MP502T-H/SS
✅ 直接替換📋 參考替代品（不在目錄中）
DSPIC33CK64MC102T-I/SS
✅ 直接替換聯絡詢價
查看資料表 →DSPIC33CK64MC102-I/SS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →DSPIC33CK32MP502-I/SS
✅ 直接替換聯絡詢價
查看資料表 →DSPIC33CK64MP502T-I/SS 最大額定值與電氣特性
| Core | dsPIC33CK 16-bit DSC |
| 最大時脈頻率 | 100 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| Data RAM Size | 8 kB |
| 工作電源電壓 | 3 V to 3.6 V |
| Number of Cores | 1 Core |
| Peripherals | CAN-FD, OpAmps, 12-bit ADCs, PWM |
| ADC Resolution | 12 bit |
| 封裝 | 28-SSOP |
| 安裝方式 | SMD/SMT |
| Minimum Operating Temperature | -40 C |
| Maximum Operating Temperature | +85 C |
| Product Type | Digital Signal Processors & Controllers - DSP, DSC |
| Family | dsPIC33C |
| Packaging | Tape & Reel (T suffix) |
DSPIC33CK64MP502T-I/SS 28-ssop 腳位配置指南
DSPIC33CK64MP502T-I/SS（28-ssop 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： DSPIC33CK64MP502T-I/SS.
請參閱 資料表 以查看完整腳位配置。
典型應用
DSPIC33CK64MP502T-I/SS 適用於 6 應用s: Digital Switch-Mode Power Supplies, BLDC / PMSM Motor Control, CAN-FD Industrial Networking Nodes, Solar Micro-Inverters and PFC Stages, Advanced Sensing and Condition Monitoring, Automotive-Adjacent and Harsh Environment Control.
Digital Switch-Mode Power Supplies
The DSPIC33CK64MP502T-I/SS fits switch-mode power supply control because its 100 MHz dsPIC33CK core closes voltage- and current-loop compensators with deterministic latency, while the high-resolution PWM outputs complementary gate signals with sub-nanosecond duty-cycle granularity. The dual 12-bit ADCs sample output voltage and shunt current at up to 3.5 Msps, and the integrated op amps can amplify shunt signals without external amplifiers, reducing BOM count in LLC, buck, and boost stages. Placed as the supervisory controller, it executes the inner current loop every switching cycle and handles CAN-FD or PMBus telemetry on the side. The trade-off versus a pure analog controller is firmware development effort, but dual-panel flash allows field firmware updates without reworking the board.
推薦
BLDC / PMSM Motor Control
For brushless DC and permanent-magnet synchronous motor drives, the DSPIC33CK64MP502T-I/SS executes field-oriented control at 100 MHz using single-cycle DSP MAC instructions for the Clarke/Park transforms and PI compensators. High-resolution PWM with programmable dead time drives a three-phase inverter, the 12-bit ADCs sample phase currents synchronized to PWM center, and the on-chip op amps amplify low-side shunt currents directly. The 28-SSOP package suits compact drives in fans, pumps, power tools, and HVAC blowers. A quantified benefit is loop-update rates of tens of kHz with interrupt latency low enough for sensorless observers; the main consideration is that 8 KB of RAM must be budgeted across control state, estimator buffers, and communication stacks.
推薦
CAN-FD Industrial Networking Nodes
The integrated CAN-FD module makes this DSC a strong fit for industrial nodes that both control local hardware and communicate on a modern CAN-FD bus at data rates beyond classical CAN. In a typical node the DSPIC33CK64MP502T-I/SS pairs with an external CAN-FD transceiver, reads sensors through its 12-bit ADCs and op amps, and performs local closed-loop control while streaming diagnostics over the bus. The 64 KB dual-panel flash accommodates a CANopen-style stack plus the application, and field firmware updates can be delivered over CAN. Compared with separate MCU-plus-transceiver-controller architectures, integration reduces component count and BOM cost; the design constraint is keeping message handling within the 8 KB RAM envelope.
推薦
Solar Micro-Inverters and PFC Stages
Grid-tied micro-inverters and power-factor-correction stages benefit from this DSC's combination of fast analog sampling and high-resolution PWM. The two 12-bit ADCs can simultaneously sample grid voltage and inductor current, enabling predictive (borderline) current-mode control at 100 MHz core speed, while the PWM module generates the phase-shifted or interleaved gate signals PFC topologies require. Integrated op amps condition current-shunt signals on-chip, trimming component count in thermally constrained outdoor enclosures. The 3.0 V to 3.6 V supply and -40 C to +85 C rating suit derated industrial environments. Designers should note that isolation and grid-protection circuitry remain external; the DSC handles control and compliance telemetry, not galvanic isolation.
推薦
Advanced Sensing and Condition Monitoring
The DSPIC33CK64MP502T-I/SS serves as a smart sensing controller where analog signals must be acquired, filtered, and interpreted locally. Its 12-bit ADCs plus on-chip op amps form a compact acquisition front end, and the DSP engine executes FIR/IIR filtering and FFT-based feature extraction at 100 MHz without host intervention. Processed results travel over CAN-FD, UART, or SPI to plant networks, enabling predictive maintenance of motors and pumps. Dual-panel flash allows logging algorithms to be updated in the field. Compared with a general-purpose MCU plus external ADC, integration shortens the analog signal path and improves noise immunity; the trade-off is a 3.0 V to 3.6 V analog domain that must be kept clean with proper supply filtering.
推薦
Automotive-Adjacent and Harsh Environment Control
Although the standard -I grade covers -40 C to +85 C, the same die is available as the DSPIC33CK64MP502T-H/SS with extended high-temperature capability, allowing one PCB design to serve harsh industrial and automotive-adjacent environments such as electric powertrain accessories, on-board chargers, and thermal management controllers. The CAN-FD interface is the native network of these systems, the PWM and ADC peripherals drive motor and power stages, and the 28-SSOP footprint keeps controller area small. Using the shared footprint across -I and -H grades lets one PCB layout address multiple temperature tiers. Designers must verify the exact temperature rating in the current Microchip datasheet for their order code before qualification.
推薦
推薦產品摘要
工程參考資料，適用於 DSPIC33CK64MP502T-I/SS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DSPIC33CK64MP502-I/SS | DSPIC33CK64MP502T-H/SS | DSPIC33CK64MC102T-I/SS | DSPIC33CK32MP502-I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Core / Clock | dsPIC33CK, 100 MHz | dsPIC33CK, 100 MHz | dsPIC33CK, 100 MHz | dsPIC33CK, 100 MHz | dsPIC33CK, 100 MHz |
| Program Flash | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB |
| Data RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| On-chip Op Amps | Yes (MP variant) | Yes | Yes | No (MC variant) | Yes |
| CAN-FD | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | -I: -40 C to +85 C | -I: -40 C to +85 C | -H: extended high temperature (up to 150 C per Microchip USA) | -I: -40 C to +85 C | -I: -40 C to +85 C |
| Packaging | Tape & Reel (T) | Tube/Tray | Tape & Reel | Tape & Reel | Tube/Tray |
主要差異化特點
- Integrated op amps reduce external analog BOM (對比DSPIC33CK64MC102T-I/SS)
- 64 KB dual-panel flash enables field updates (對比DSPIC33CK32MP502-I/SS)
- Extended-temperature drop-in available (對比DSPIC33CK64MP502T-H/SS)
設計說明
The DSPIC33CK64MP502T-I/SS requires a 3.0 V to 3.6 V supply with adequate decoupling: place a 0.1 uF ceramic capacitor at each VDD pin pair and a 10 uF bulk capacitor near the device. When coexisting with noisy power-conversion circuitry, isolate the controller supply with an LC filter or a small LDO fed from the main rail, because ADC accuracy depends directly on VDD ripple. Estimated: a 100 mVpp supply ripple can degrade 12-bit ADC effective resolution noticeably, so target less than 20 mVpp at the VDD pins.
For the 28-SSOP (0.65 mm pitch), route PWM outputs away from the ADC input traces and analog op-amp pins to minimize coupled switching noise. Use a solid ground plane and connect the shunt/op-amp input network with Kelvin routing directly to the amplifier input pins. Keep the crystal or clock source traces short and guarded by ground. These practices follow Microchip's dsPIC33C family layout guidance in the device datasheet and associated hardware design application notes.
Do not assume pin-equivalence between MP and MC variants at board bring-up without checking the datasheet pin tables - most pins match but multiplexed analog functions differ. Also confirm the exact temperature suffix: the -I grade tops out at +85 C, while only the -H variant supports higher ambient temperatures. Finally, when substituting the DSPIC33CK32MP502 for the 64 KB part, verify that compiled firmware plus bootloader fits in 32 KB before switching MPNs.
合規資訊
Compliance details were not present in the verified web data. Microchip standard catalog parts are typically RoHS-compliant and lead-free; confirm on the official Microchip product page before procurement.
