dsPIC33EP128MU206-H/MR - 16-bit DSC 128KB Flash QFN-64 | Microchip
MPN： DSPIC33EP128MU206-H/MR ✓ 啟用中DSPIC33EP128MU206-H/MR 概覽
A Digital Signal Controller combines the compute throughput of a DSP with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes single-cycle MAC and DSP-enhanced instructions like a DSP, while retaining flash self-programming, rich timers, and communication peripherals typical of microcontrollers. The dsPIC33EP family is Microchip's high-performance 16-bit DSC generation, superseding the dsPIC33F series.
Key features include the 16-bit modified Harvard architecture with DSP engine, 128 KB flash and 16 KB RAM, a high-speed 12-bit ADC with multi-sample support, dual CAN 2.0B modules, USB 2.0 full-speed device capability, and multiple UART/SPI/I2C ports. The MU206 variant is distinguished by its USB and dual-CAN combination, which few other 64-pin dsPIC33EP parts offer, making it a natural fit for automotive and industrial gateway nodes.
Internally, the core achieves 70 MIPS at 3.3V with a 17-bit x 17-bit single-cycle hardware multiplier, 40-bit accumulator, and dual operands addressing for DSP kernels such as FIR filters and PID loops. Programmable PLL clocking allows low-cost crystals to synthesize the full-speed system clock.
Typical applications include motor control and power conversion, automotive gateways, USB-equipped industrial instruments, and digital power supplies where the 12-bit ADC feeds control loops at kHz rates.
For design, the -H/MR temperature grade (-40C to +125C) and thermally enhanced QFN exposed pad demand a solid ground pour; verify clock and PLL settings against the target MIPS before finalizing layout.
This page consolidates distributor sourcing data, drop-in family alternatives, and practical design notes beyond the manufacturer datasheet.
直接替換替代品，適用於 DSPIC33EP128MU206-H/MR — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： DSPIC33EP128MU206-H/MR （相同外形與佔位） — 差異在於 Communication Interfaces, Operating Temperature, Package, Program Memory (Flash).
DSPIC33EP128MU206-I/MR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →DSPIC33EP256MU206-H/MR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33EP256MU206-I/MR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33EP64MU206-H/MR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33EP128MU206T-H/MR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
DSPIC33EP128MU206-H/MR 最大額定值與電氣特性
| Core Type | 16-bit dsPIC33EP DSC with DSP engine |
| Program Memory (Flash) | 128 KB |
| RAM | 16 KB |
| Maximum CPU Speed | 70 MIPS |
| ADC Resolution | 12-bit |
| Operating Voltage | 3.0 V to 3.6 V (single supply) |
| 工作溫度 | -40C to +125C (-H grade) |
| 封裝 | 64-pin QFN (MR), 9x9 mm |
| Communication Interfaces | USB 2.0 full-speed device, 2x CAN 2.0B, UART, SPI, I2C |
| 安裝類型 | Surface Mount |
| Timers | Multiple 16-bit and 32-bit timers with input capture/output compare |
| Motor Control PWM | Dedicated Motor Control PWM module |
| In-Circuit Programming | ICSP via In-Circuit Debugger (ICD) |
| RoHS 狀態 | Lead free / RoHS compliant |
| Series | dsPIC33EP128MU206 |
DSPIC33EP128MU206-H/MR 64-pin qfn (mr), 9x9 mm 腳位配置指南
DSPIC33EP128MU206-H/MR（64-pin qfn (mr), 9x9 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： DSPIC33EP128MU206-H/MR.
請參閱 資料表 以查看完整腳位配置。
典型應用
DSPIC33EP128MU206-H/MR 適用於 6 應用s: Motor Control (PMSM/BLDC FOC), USB-to-CAN Industrial Gateway, Digital Power Conversion, Automotive Subsystem Nodes, Portable and USB-Powered Instruments, Industrial Sensor Acquisition Nodes.
Motor Control (PMSM/BLDC FOC)
The dsPIC33EP128MU206-H/MR fits motor-control drives because its dedicated Motor Control PWM module produces complementary outputs with programmable dead time, while the 12-bit ADC samples phase currents synchronized to the PWM period - the exact topology required for field-oriented control. The 70 MIPS core with single-cycle 17x17 MAC executes Clarke/Park transforms and dual PI current loops comfortably at 20 kHz switching frequencies. In this application the DSC sits between gate drivers and the position sensor (encoder or resolver via QEI), closing torque loops in firmware. Design consideration: keep the ADC anti-aliasing filter and current-sense shunt layout close to the QFN pins, and exploit the -H grade (-40C to +125C) for hot drive enclosures.
推薦
USB-to-CAN Industrial Gateway
The MU206 is one of the few 64-pin dsPIC33EP parts combining a USB 2.0 full-speed device controller with dual CAN 2.0B modules, making it a natural single-chip bridge between a PC and two CAN buses. Typical firmware enumerates as a USB CDC device while running two independent CAN protocol stacks, with the 16 KB RAM buffering message queues and the 128 KB flash holding both stacks plus application logic. The 70 MIPS core leaves headroom for protocol translation (J1939, CANopen) without an external processor. Benefit: one chip replaces MCU + USB bridge + CAN controller, cutting BOM cost and board area in the 9x9 mm QFN.
推薦
Digital Power Conversion
In AC-DC and DC-DC converters the dsPIC33EP128MU206-H/MR implements voltage-mode or average-current-mode control digitally: the 12-bit ADC digitizes output voltage and inductor current, and the high-resolution PWM adjusts duty cycle each switching cycle. At 70 MIPS, control-loop update rates of 100 kHz and beyond are practical for LLC, boost-PFC, and synchronous-buck stages. The -H temperature grade suits power supplies inside sealed industrial enclosures reaching 125C ambient near hot components. Practical note: use the ADC interrupt-to-PWM trigger path (not polling) to keep control-loop jitter in the nanosecond range, and reserve flash headroom for firmware-field-upgrade routines.
推薦
Automotive Subsystem Nodes
Although not AEC-Q100 qualified in this exact suffix, the dsPIC33EP128MU206-H/MR's dual CAN 2.0B controllers, -40C to +125C grade, and 3.0-3.6 V supply align with many auxiliary automotive and off-highway electronic modules such as body controllers, pump controllers, and sensor aggregators. The 12-bit ADC reads analog sensor channels, timers generate PWM actuator drives, and both CAN ports link the node to vehicle networks - all in one chip. Designers targeting strict automotive qualification should verify the applicable PPAP-grade ordering options with Microchip, as commercial-grade dsPIC33EP parts may need formal qualification review before deployment in safety-relevant positions.
推薦
Portable and USB-Powered Instruments
For handheld test equipment, dataloggers, and USB accessories, the dsPIC33EP128MU206-H/MR offers full-speed USB device connectivity for data streaming and firmware update, while its DSP engine performs real-time FFT, filtering, or sensor-fusion math on the sampled data. The 12-bit ADC captures analog inputs at rates adequate for audio-band and industrial telemetry, and the 16 KB RAM holds ping-pong USB buffers plus DSP working arrays. Running from a single 3.3 V rail with modest peripheral current, the part integrates easily into battery-powered designs using a boost or LDO front end. The single-chip approach eliminates a separate USB-interface IC, saving board area in compact enclosures.
推薦
Industrial Sensor Acquisition Nodes
In distributed industrial monitoring, the dsPIC33EP128MU206-H/MR aggregates analog sensor channels through its 12-bit ADC (fronted by op-amp signal conditioning) and publishes processed values over UART, SPI, I2C, or CAN to a PLC or SCADA gateway. The 70 MIPS DSP engine applies digital filtering, RMS computation, or spectrum analysis locally, reducing bandwidth on the fieldbus and enabling edge decisions such as threshold alarms. The -H grade tolerates cabinet temperatures up to 125C, and the 128 KB flash accommodates firmware plus Modbus or CANopen stacks with room for field updates. The QFN-64 pin count supports multiple sensor channels plus two communication buses on one controller.
推薦
推薦產品摘要
工程參考資料，適用於 DSPIC33EP128MU206-H/MR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DSPIC33EP128MU206-I/MR | DSPIC33EP256MU206-H/MR | DSPIC33EP64MU206-H/MR |
|---|---|---|---|---|
| Package | 64-QFN (MR) | 64-QFN (MR) - same | 64-QFN (MR) - same | 64-QFN (MR) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 128 KB | 128 KB | 256 KB | 64 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB |
| Core Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +125C |
| USB | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device |
| CAN Modules | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
主要差異化特點
- USB + dual CAN on one 64-pin DSC (對比DSPIC33EP128MC206-I/PT)
- Extended -40C to +125C grade (對比DSPIC33EP128MU206-I/MR)
- Cost-optimized memory point (對比DSPIC33EP256MU206-H/MR)
設計說明
The /MR 64-QFN has a central exposed thermal pad that is the primary ground return. Define a solder-mask-defined window on the PCB with an array of thermal vias (typically 5x5, 0.3 mm drilled, plugged or tented) connecting to the internal ground plane. Without a solid pad connection, grounding of ADC references and CAN transceivers will be noisy and thermal performance degrades sharply. Follow Microchip's QFN layout appnotes for stencil aperture design (~70-80% coverage split into multiple apertures).
The device runs from a single 3.0-3.6 V rail. Decouple every VDD pin pair with 0.1 uF ceramics placed within 2 mm of the pins, plus one bulk 10 uF per supply group. If USB is used, the internal USB transceiver draws transient current during enumeration - provide local bulk capacitance and ensure the 3.3 V regulator can handle the combined core and USB load. Estimated: a typical running configuration draws a few tens of mA plus I/O loads; size the regulator for peak, not average, current.
Clock configuration is the most common bring-up failure: the PLL multiplier/divider must be programmed so the resulting Fcy does not exceed 70 MIPS (35 MHz instruction cycle at 3.3V, per family limits). Devices can lock up or draw excess current when over-clocked. Also confirm the correct ordering-code suffix before purchase - /MR (64-QFN) and /PT (TQFP-64) are electrically identical but NOT footprint-compatible, and -I vs -H temperature grades are not interchangeable in hot designs.
合規資訊
Distributor listings (Components-Store) state 'Lead free / RoHS Compliant' for this part. REACH, halogen-free, and conflict-minerals status not stated in verified data.
