EFM32LG840F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32LG840F64-QFN64 ✓ 啟用中EFM32LG840F64-QFN64 概覽
An MCU is a compact integrated circuit containing a processor core, memory, peripherals, and I/O in one package. Within the embedded-control hierarchy, the EFM32LG840 belongs to the 32-bit ARM Cortex-M3 class and the Silicon Labs Leopard Gecko family. This platform combines conventional microcontroller control with energy-saving modes and autonomous peripherals that can continue measuring or driving system events while the main processor sleeps.
Key features include a maximum operating speed of 48 MHz, 64 KB of flash, 32 KB of RAM, and 56 digital I/O pins. The family datasheet states that EFM32LG devices can consume as little as 0.65 uA in Stop mode and 211 uA/MHz in Run mode. These figures make the device relevant to battery-powered sensors, portable instruments, and industrial nodes in which average power consumption matters as much as processing performance.
The Cortex-M3 processor uses a 32-bit RISC architecture and can deliver up to 1.25 Dhrystone MIPS/MHz according to the EFM32LG840 datasheet. It includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for handling events that occur while the processor is asleep. These features support responsive firmware, protected memory regions, and event-driven system design.
Typical uses include low-power sensor nodes, compact industrial controllers, battery-operated measurement equipment, LCD-equipped human-interface devices, and connected embedded products. The integrated LCD capability is especially useful for local status displays, while AES acceleration can simplify implementations that protect stored data or communications.
Designers should account for the device's 1.98 V to 3.8 V operating-supply range and use a regulator that maintains the required voltage across temperature and load. Decoupling should be placed close to the supply pins, and unused pins should be handled according to the pin-description and termination guidance in the manufacturer datasheet. The exact exposed-pad connection and thermal layout should also be checked against the package drawing before PCB release.
This product page consolidates core electrical characteristics, package constraints, replacement considerations, and application guidance. It also distinguishes direct same-footprint options from broader functional alternatives so engineers can focus first on pin compatibility and then verify firmware, peripheral, temperature-grade, and qualification requirements before approving a substitution.
直接替換替代品,適用於 EFM32LG840F64-QFN64 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EFM32LG840F64-QFN64 (相同外形與佔位) — 差異在於 Flash Memory, Package, RAM, Series.
EFM32LG840F64G-QFN64
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
EFM32LG840F64G-E-QFN64
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
EFM32LG840F64G-F-QFN64
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
EFM32LG840F128-QFN64
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
EFM32LG840F256-QFN64
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
EFM32LG840F64-QFN64 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Leopard Gecko |
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| RAM | 32 KB |
| Digital I/O Pins | 56 pins |
| Timers | 4 x 16-bit timers |
| LCD Support | 8 x 20 segments |
| Security Accelerator | AES |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.65 uA |
| Run Mode Current | 211 uA/MHz |
| Processor Performance | Up to 1.25 Dhrystone MIPS/MHz |
| Memory Protection Unit Segments | Up to 8 segments |
| 封裝 | QFN-64 |
| 安裝類型 | Surface mount |
EFM32LG840F64-QFN64 qfn-64 腳位配置指南
EFM32LG840F64-QFN64(qfn-64 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32LG840F64-QFN64.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32LG840F64-QFN64 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Control and Monitoring, LCD-Equipped Human Interface Devices, Portable Measurement Instruments, Secure Embedded Products, Connected IoT Edge Devices.
Battery-Powered Sensor Nodes
The EFM32LG840F64-QFN64 fits battery-powered sensor nodes because its family can operate at 0.65 uA in Stop mode and 211 uA/MHz in Run mode, while 56 digital I/O pins support multiple sensing and control connections. The 48 MHz Cortex-M3 core provides enough performance for filtering, local calculations, and event handling without requiring a faster processor. Use the low-power modes and autonomous peripherals to keep the processor asleep between measurements. Battery sizing should include sensor current, wake-up frequency, and the duration of each active processing interval.
推薦
Industrial Control and Monitoring
The EFM32LG840F64-QFN64 is suitable for compact industrial monitoring equipment that combines digital inputs, local processing, and status indication. Its 48 MHz ARM Cortex-M3 core supports responsive control logic, while the Memory Protection Unit can isolate up to eight memory segments for firmware reliability. Four 16-bit timers provide resources for timing, pulse measurement, or periodic maintenance tasks, and the 56 digital I/O pins simplify peripheral connection. The 1.98 V to 3.8 V supply range suits low-voltage regulated control rails.
推薦
LCD-Equipped Human Interface Devices
The EFM32LG840F64-QFN64 supports 8 x 20 LCD displays, making it appropriate for handheld instruments, appliance panels, and compact status terminals. The LCD interface can present operating state, measurements, and menu information without requiring a separate display controller. Its 48 MHz Cortex-M3 core handles interface updates and user-input logic, while 32 KB of RAM and 64 KB of flash accommodate application firmware and working data. Designers should verify the panel electrical interface and pin multiplexing against the manufacturer pin-description table.
推薦
Portable Measurement Instruments
The EFM32LG840F64-QFN64 works well in portable measurement instruments where a low-power 32-bit controller can manage sensors, display data, and record operating state. Its 48 MHz processing rate supports responsive acquisition and control routines, and the 64 KB flash provides space for embedded application code. Low-power Stop operation can reduce consumption between measurement cycles, while fast wake-up behavior helps shorten response time. A complete power budget should include analog front-end circuits, the display, input controls, and any wireless interface.
推薦
Secure Embedded Products
The integrated AES accelerator in the EFM32LG840F64-QFN64 can reduce the processing burden of common encryption operations compared with a software-only implementation. This makes the device useful for connected products, access terminals, and portable equipment that must protect stored data or authenticated messages. The 48 MHz Cortex-M3 core can manage the application, communications, and control logic while the hardware accelerator handles suitable AES workloads. Security design should still include unique keys, protected firmware processes, and secure update mechanisms beyond the presence of the accelerator.
推薦
Connected IoT Edge Devices
The EFM32LG840F64-QFN64 can serve as the edge controller in a compact IoT device that senses local inputs, runs application logic, and manages a communications module. Its 48 MHz Cortex-M3 core and 64 KB of flash provide a practical balance of processing capacity and memory for protocol handling and control logic, while 56 digital I/O pins support sensors and discrete interfaces. Low-power operation improves energy efficiency in intermittently connected equipment. The final design should account for radio idle and transmit current, which may dominate the MCU's contribution to total system consumption.
推薦
工程參考資料,適用於 EFM32LG840F64-QFN64 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32LG840F64G-QFN64 | EFM32LG840F64G-E-QFN64 | EFM32LG840F64G-F-QFN64 | EFM32LG840F128-QFN64 | EFM32LG840F256-QFN64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | QFN-64 | QFN-64 - same package | QFN-64 - same package | QFN-64 - same package | QFN-64 - same package | QFN-64 - same package |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 256 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
主要差異化特點
- Balances 48 MHz processing with family-level low-power operation (對比EFM32LG840F256-QFN64)
- Provides enough flash for the target application without moving to the 128 KB option (對比EFM32LG840F128-QFN64)
- Combines local display and hardware security resources in one MCU (對比EFM32LG840F64G-E-QFN64)
設計說明
Design the supply for the full 1.98 V to 3.8 V operating range and include local high-frequency decoupling at the device power pins. The EFM32LG family's Stop and Run current figures are useful for initial sizing, but average consumption depends on clock frequency, active peripherals, flash access, and wake-up frequency. For battery systems, measure the complete current profile rather than relying only on the headline Stop-mode current.
Use the manufacturer QFN-64 land pattern, exposed-pad requirement, and pin-1 orientation when creating the PCB footprint. Place power and ground connections with low-inductance paths, decouple each supply group as directed in the datasheet, and keep sensitive analog or high-speed nets away from switching nodes. Review the package drawing and pin-description table together so exposed-pad treatment and thermal-via placement match the selected assembly process.
Do not treat every EFM32LG840 order code as automatically production-equivalent. Revision, flash-capacity, and temperature-grade suffixes can change qualification or firmware assumptions even when the QFN-64 footprint remains the same. Before substitution, compare the manufacturer ordering information, pin table, electrical limits, errata status, programming procedure, and qualification records. Also avoid inferring unused-pin behavior from another member of the family.
合規資訊
No order-specific environmental or material-compliance declarations were identified. Confirm the current declarations and qualification status for the exact order code with the manufacturer before production release.