EP20K100CQ240C9 - APEX 20K FPGA 100K Gates 189 I/O QFP240 | Intel
MPN： EP20K100CQ240C9 ⚠ 最後購買機會EP20K100CQ240C9 概覽
An FPGA (Field Programmable Gate Array) is a programmable logic device that allows engineers to implement custom digital circuits through configurable logic blocks (LABs), embedded memory arrays (ESBs), and programmable interconnect. Within the broader semiconductor taxonomy, FPGAs sit alongside ASICs, CPLDs, and microcontrollers as reconfigurable compute elements. The APEX 20K series was Intel/Altera's first device family to combine logic, memory, and dedicated I/O on a single die, enabling system-on-chip designs without external glue logic.
Key features include 100,000 typical gates, 4,160 logic elements distributed across multiple Logic Array Blocks, 53,248 bits of embedded SRAM, 189 user I/O pins, and 4 Phase-Locked Loops (PLLs) for clock management. The device supports multiple I/O standards including LVTTL, LVCMOS, PCI, and GTL, with per-pin output enable and programmable slew rate. The C9 speed grade denotes a -9 commercial-grade timing class, balancing logic density with timing closure for moderate-speed designs.
Architecture-wise, the APEX 20K combines Look-Up Table (LUT)-based logic elements with Embedded System Blocks (ESBs) that can be configured as either dual-port RAM, ROM, or CAM. Four PLLs provide on-chip clock multiplication, division, phase shifting, and skew compensation. MultiCore voltage islands and JTAG boundary-scan (IEEE 1149.1) support simplify board-level testing.
Typical applications include telecommunications infrastructure, industrial control, ASIC prototyping, glue logic replacement, and high-speed data-path designs. The 189 I/O count supports parallel bus architectures common in DSP front-ends and protocol bridges.
Design consideration: route all clock signals through dedicated PLL outputs to minimize skew, and consult the APEX 20K handbook for I/O standard bank restrictions. Designers migrating to modern Intel/Altera FPGAs should note the APEX 20K is in legacy/last-time-buy status.
This page synthesizes distributor stock data, parametric alternatives, and design considerations not found in the original manufacturer datasheet to assist procurement engineers evaluating the EP20K100CQ240C9 for new designs or legacy system maintenance.
直接替換替代品，適用於 EP20K100CQ240C9 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP20K100CQ240C9 （相同外形與佔位） — 差異在於 Speed Grade, Operating Temperature, Family, Package, Logic Elements.
EP20K100CQ240C8
✅ 直接替換聯絡詢價
查看資料表 →EP20K100CQ240C7
✅ 直接替換聯絡詢價
查看資料表 →EP20K100CQ208C9
✅ 直接替換聯絡詢價
查看資料表 →EP20K100CF324C9
✅ 直接替換聯絡詢價
查看資料表 →EP20K200CQ240C9
✅ 直接替換📋 參考替代品（不在目錄中）
EP20K100CQ240C9 最大額定值與電氣特性
| Series | APEX 20K |
| Family | APEX 20K (SRAM-based FPGA) |
| Typical Gates | 100,000 |
| Logic Elements | 4,160 |
| Embedded Memory (RAM bits) | 53,248 |
| User I/O Pins | 189 |
| Number of PLLs | 4 |
| Package Type | 240-BQFP (QFP-240) |
| 工作溫度 | 0°C to +85°C (commercial) |
| Speed Grade | C9 (-9 commercial) |
| Process Technology | 0.22 µm CMOS SRAM |
| Programming Method | In-system SRAM (volatile) |
| Configuration Method | Serial/Passive Parallel/Byte-wide JTAG |
| I/O Standards Supported | LVTTL, LVCMOS, PCI, GTL |
| JTAG (IEEE 1149.1) Support | Yes |
| 安裝類型 | Surface Mount |
EP20K100CQ240C9 240-bqfp (qfp-240) 腳位配置指南
EP20K100CQ240C9（240-bqfp (qfp-240) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP20K100CQ240C9.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP20K100CQ240C9 適用於 6 應用s: ASIC Prototyping and Emulation, Industrial Control Systems, Telecommunications Infrastructure, Glue Logic Replacement, High-Speed Data Path Designs, Legacy System Maintenance and Repair.
ASIC Prototyping and Emulation
The EP20K100CQ240C9 with 100K gates and 189 user I/O pins is well-suited for ASIC prototyping and pre-silicon validation. Its 4,160 logic elements and 53,248 bits of embedded SRAM allow mapping of mid-complexity ASIC designs to real hardware for functional verification. Designers can iterate RTL quickly and validate timing before committing to silicon.
推薦
Industrial Control Systems
Industrial automation and process control systems benefit from the EP20K100CQ240C9's 189 I/O pins and embedded SRAM. The device supports LVTTL, LVCMOS, PCI, and GTL I/O standards, simplifying interface to legacy industrial buses. Four PLLs provide flexible clock generation for motor control and sensor signal conditioning subsystems.
推薦
Telecommunications Infrastructure
Telecom equipment designers leverage the EP20K100CQ240C9's high I/O count and embedded memory for protocol bridging, channelized data aggregation, and DSP front-end interfacing. The 4 PLLs support multiple clock domains required in TDM and packet-switched architectures. SRAM-based in-system programmability enables field firmware upgrades.
推薦
Glue Logic Replacement
The EP20K100CQ240C9 replaces multiple discrete TTL/CMOS glue logic ICs on legacy boards, reducing component count and BOM cost. Its 4,160 logic elements can implement complex state machines, address decoding, bus arbitration, and interrupt controllers. SRAM-based configuration allows late-stage design changes during board bring-up.
推薦
High-Speed Data Path Designs
Data path applications like packet processing, FIFO buffers, and crossbar switches benefit from the EP20K100CQ240C9's 53,248 bits of embedded SRAM configurable as dual-port RAM, ROM, or CAM. The 4 PLLs and 189 I/O support high-bandwidth parallel data interfaces. The C9 speed grade provides adequate timing margin for moderate-speed pipelines.
推薦
Legacy System Maintenance and Repair
For maintaining legacy equipment originally designed around the APEX 20K family, the EP20K100CQ240C9 provides a like-for-like replacement with identical pinout and silicon. End-of-life industrial, aerospace, and defense systems depend on continued availability of this exact part. Procurement teams should secure long-term inventory before stock depletes.
推薦
推薦產品摘要
工程參考資料，適用於 EP20K100CQ240C9 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP20K100CQ240C8 | EP20K100CQ240C7 | EP20K200CQ240C9 |
|---|---|---|---|---|
| Package | 240-BQFP (QFP-240) | 240-BQFP (QFP-240) - same | 240-BQFP (QFP-240) - same | 240-BQFP (QFP-240) - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel |
| Typical Gates | 100,000 | 100,000 (same die) | 100,000 (same die) | 200,000 (larger die) |
| Logic Elements | 4,160 | 4,160 | 4,160 | 8,320 |
| User I/O Pins | 189 | 189 | 189 | 189 |
| Speed Grade | C9 (-9 commercial) | C8 (-8 commercial, faster) | C7 (-7 commercial, fastest) | C9 (-9 commercial) |
| Embedded SRAM | 53,248 bits | 53,248 bits | 53,248 bits | 106,496 bits |
| PLLs | 4 | 4 | 4 | 4 |
主要差異化特點
- Highest logic density in the APEX 20K family at 240-pin QFP (對比EP20K200CQ240C9)
- Same package as faster commercial speed grades (對比EP20K100CQ240C8)
- 189 I/O pins support high-pin-count designs (對比EP20K100CF144C9)
設計說明
Estimated: The APEX 20K EP20K100CQ240C9 requires separate VCCINT (core) and VCCIO (I/O) supplies; typical VCCINT is 2.5V and VCCIO is 3.3V or 2.5V depending on I/O standard. Decoupling requires 0.1µF ceramic capacitors near every supply pin plus bulk capacitors on each supply rail. Consult the APEX 20K handbook for exact voltage tolerances and power-on sequencing requirements.
The 240-BQFP package has limited thermal dissipation compared to BGA packages. Estimated: at maximum toggle rate and 100% I/O utilization, junction temperature can rise 15-20°C above ambient. For commercial (0°C to +85°C) operation, ensure adequate airflow or thermal copper pours on the PCB to maintain junction temperature below 125°C.
Route all clock inputs through dedicated PLL clock pins (CLK0-CLK3) for best jitter performance. JTAG (TCK/TMS/TDI/TDO) signals should be routed with impedance control and isolated from switching signals. Configuration pins (MSEL0, MSEL1, MSEL2, nCE, nCONFIG, CONF_DONE, nSTATUS, DCLK, DATA0) must be properly pulled up/down per the selected configuration mode.
Do not confuse the EP20K100CQ240C9 with EP20K100BC356 (different package) or EP20K200CQ240C9 (different density). The C9 suffix indicates a -9 commercial speed grade; for industrial temperature range, look for -I or industrial-grade variants. Last Time Buy status means production is discontinued - plan obsolescence mitigation.
合規資訊
Compliance status not explicitly stated in verified web data. APEX 20K family predates widespread RoHS transition; some variants may be non-RoHS. Verify with supplier before use in RoHS-required designs.
