Altera

EP2C15AF256A7N - 14,448 LEs, 402.58 MHz FPGA | Altera

料号: EP2C15AF256A7N ✗ 停产
1.2 V Vdss 256-LBGA Package 402.58 MHz Speed
最小起订量: 1 |

EP2C15AF256A7N 概述

Altera EP2C15AF256A7N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/Os, a 402.58 MHz maximum device frequency, 1.2 V core supply, and a 256-LBGA package. It is a surface-mount programmable-logic device intended for embedded control, industrial, communications, automotive, and test applications.

A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior are configured through a programmable bitstream. The EP2C15AF256A7N belongs to the Cyclone II FPGA family, placing it within the broader hierarchy of programmable-logic devices, FPGAs, programmable semiconductors, and digital integrated circuits. Its combination of logic density, device speed, embedded memory, and a large fine-pitch package supports designs requiring parallel data paths, control logic, and programmable interfaces.

The device is manufactured using 90 nm CMOS technology and operates from a 1.2 V core supply. The A7N ordering suffix identifies the device grade and temperature option, while the 256 suffix denotes the 256-pin FBGA package. The automotive designation shown in the product listing indicates that the part is associated with automotive-grade ordering, but the exact qualification wording and temperature limits should be confirmed in the manufacturer documentation before production release.

The 14,448 logic elements provide substantially more programmable capacity than small CPLDs and make the device suitable for multi-module control systems, protocol bridges, industrial controllers, and embedded test equipment. Its 152 I/O count is important when a design needs substantial parallel connectivity, although the exact usable I/O count depends on power-supply configuration, package balls, and the selected device variant.

The 256-LBGA package creates a compact solution but requires careful PCB layout. Power and ground distribution, via-in-pad or via-adjacent decoupling, BGA escape routing, and thermal management are central to achieving reliable operation. Cyclone II FPGAs also require a supported programming and configuration flow, so software tool support, JTAG programming, and memory-interface compatibility should be checked early in the design cycle.

This device is most appropriate when designers need a mid-density Cyclone II FPGA in the 256-LBGA package rather than a modern low-cost FPGA with a different package or pinout. For replacement decisions, validate the pinout, power rails, configuration scheme, JTAG behavior, and Quartus-compatible design constraints rather than relying only on the logic-element count. The related EP2C15AF256I8N and EP2C15AF256C6N parts share the device family and package identifiers, but their suffix-specific operating and qualification characteristics require direct comparison with the exact design requirements.

This page provides a consolidated technical view of the EP2C15AF256A7N, including family positioning, application guidance, design considerations, and clearly identified sourcing information for engineers evaluating the device.

直接替换替代料: EP2C15AF256A7N ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: EP2C15AF256A7N (相同外形与封装尺寸) ——差异在于 Device Type, Logic Elements, User I/O Count, Core Supply Voltage, Maximum Device Frequency.

Altera
Device Type: Cyclone II Field Programmable Gate Array (FPGA)
Logic Elements: 14,448 cells
User I/O Count: 152 I/O
对比 EP2C15AF256A7N →
Altera
Device Type: FPGA (Field Programmable Gate Array)
对比 EP2C15AF256A7N →
Intel
Device Type: Cyclone II Field Programmable Gate Array (FPGA)
Logic Elements: 14,448
User I/O Count: 315 I/O
对比 EP2C15AF256A7N →

EP2C15AF256I8N

✅ 直接替换
Altera
📦 256-LBGA
FPGA (Field Programmable Gate Array) · Cyclone II (EP2C15) · 14448 · 239616 · 152 · FBGA-256 / 256-LBGA · LBGA

联系询价

查看数据手册 →

EP2C15AF256C6N

✅ 直接替换
Altera
📦 256-LBGA
Cyclone II Field Programmable Gate Array (FPGA) · 14,448 cells · 152 I/O · 500 MHz · 1.2 V · 256-LBGA · 256 pins · Surface Mount

联系询价

查看数据手册 →

EP2C15AF484A7N

✅ 直接替换
Intel
📦 FBGA-484
Cyclone II Field Programmable Gate Array (FPGA) · 14,448 · 903 · 234 kbit · 239,616 bit · 315 I/O · 1.15 V to 1.25 V · 450 MHz

联系询价

查看数据手册 →

EP2C15AF256A7N 最大额定值与电气特性

Device Type Cyclone II field-programmable gate array (FPGA)
Logic Elements 14,448 LEs
Maximum Device Frequency 402.58 MHz
User I/O Count 152 I/Os
Core Supply Voltage 1.2 V
Process Technology 90 nm CMOS
封装 256-LBGA
Package Type FBGA-256
安装类型 Surface mount
Programmable Logic Type FPGA
Automotive Association AEC-Q100
RoHS 状态 Compliant
Number of User I/O 152 I/Os
Standard Packaging Tray
Device Family Cyclone II

EP2C15AF256A7N fbga-256 引脚配置指南

EP2C15AF256A7N(fbga-256 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

EP2C15AF256A7N 的 fbga-256 封装引脚图

暂无详细引脚数据: EP2C15AF256A7N.

请参阅 数据手册 以查看完整引脚配置。

典型应用

EP2C15AF256A7N 适用于 6 应用s: Industrial Control Logic, Communications Interface, Automotive Control Module, Programmable Test Equipment, Video and Image Processing, Embedded Instrumentation.

🏭

Industrial Control Logic

The EP2C15AF256A7N fits industrial controllers that require moderate programmable logic density, extensive parallel I/O, and deterministic hardware control. Its 14,448 logic elements can implement multiple state machines, protocol handlers, timing blocks, and supervisory logic, while 152 user I/Os support sensors, actuators, counters, and communication transceivers. The 1.2 V core and 402.58 MHz device-frequency rating provide useful timing headroom for parallel control paths. The 256-LBGA package reduces board area compared with larger leaded packages, but it requires careful power distribution, decoupling, and BGA escape routing. For industrial use, confirm the exact A7N temperature grade and qualification requirements before releasing the design.

🌐

Communications Interface

The EP2C15AF256A7N is suitable for communications equipment requiring programmable data paths, parallel interfaces, and protocol adaptation. The 14,448 logic elements can support framing logic, FIFOs, clock-domain crossing, error checks, and interface adapters, while 152 I/Os provide substantial board-level connectivity. Its 402.58 MHz maximum device frequency is useful for timing-critical datapaths, although realized throughput remains design- and constraint-dependent. The device should be paired with transceiver and clocking components whose interface voltage, protocol, and timing align with the FPGA I/O assignments. BGA layout must preserve high-speed return paths and adequate decoupling, especially around clock and data balls.

🚗

Automotive Control Module

The EP2C15AF256A7N is a candidate for automotive control modules because its ordering code is associated with automotive AEC-Q100 qualification in the product listing. Its 14,448 logic elements can implement body, sensor, or actuator control logic, while 152 user I/Os support vehicle-network interfaces, diagnostics, and discrete sensors. The 90 nm Cyclone II implementation and 1.2 V core supply suit compact embedded logic, but automotive suitability requires more than package fit: the exact temperature grade, AEC-Q100 qualification, failure-rate expectations, and production traceability must be confirmed. The 256-LBGA package also demands automotive-capable assembly processes, inspection, and controlled soldering profiles.

🔧

Programmable Test Equipment

The EP2C15AF256A7N is well suited to compact automated test and instrumentation systems that need configurable sequencing, pattern generation, acquisition control, and interface logic. Its 14,448 logic elements support parallel test channels and control pipelines, while the 402.58 MHz device-frequency rating helps implement time-domain measurement functions and high-speed state machines. The 152 I/Os allow connection to sensors, stimulus drivers, and capture logic without moving to a larger package. Designers should use deterministic clocking, bounded fanout, and carefully planned I/O standards. At 402.58 MHz, routing and clock-quality analysis in Quartus are essential, and test-equipment analog sections should maintain isolation from switching and high-current FPGA supply paths.

📺

Video and Image Processing

The EP2C15AF256A7N can support parallel video and image-processing functions that require deterministic logic pipelines rather than a large processor core. The 14,448 logic elements can be partitioned across pixel processing, line buffering control, synchronization, and status generation, while 152 I/Os accommodate parallel sensor or display interfaces. The 402.58 MHz maximum device frequency permits multiple pixel lanes at practical video rates when timing closure permits. The 256-LBGA package provides a compact solution with many signal connections, but high-speed routing must account for ball escapes, return-path continuity, and impedance control. External SDRAM or frame-buffer components should be selected according to the required bandwidth, and the complete memory interface must be timing-closed in Quartus.

🖥️

Embedded Instrumentation

The EP2C15AF256A7N is appropriate for embedded instrumentation that combines configurable measurement control with flexible I/O and moderate logic capacity. Engineers can use its 14,448 logic elements for sensor conditioning logic, digital calibration, trigger sequencing, and data formatting, while 152 I/Os support multiplexed analog front ends and precision converters. Its 1.2 V core supply and 402.58 MHz device rating support compact, high-performance signal-chain control without a separate microprocessor for every sequencing function. For low-noise analog systems, isolate FPGA supply and return currents from sensitive analog rails, place local decoupling at every supply ball group, and route clock signals away from switching nodes. Confirm the device's I/O voltage capabilities against the selected converters and instrumentation front ends.

What is the EP2C15AF256A7N?
The EP2C15AF256A7N is an Altera Cyclone II FPGA with 14,448 logic elements, 152 user I/Os, a 402.58 MHz maximum device frequency, and a 1.2 V core supply in a 256-LBGA package. According to the manufacturer and distributor product information, it is built on 90 nm CMOS technology and is positioned for programmable control, communications, industrial, automotive, and test systems. The package is surface mount, and the ordering code identifies the specific grade, temperature option, and package configuration.
How many logic elements and I/Os does the EP2C15AF256A7N have?
The EP2C15AF256A7N contains 14,448 logic elements and provides 152 user I/Os. These figures are listed in the manufacturer-family descriptions carried by the component catalog results. The logic-element count indicates programmable capacity, while the I/O count constrains board-level connectivity. Practical I/O availability can vary with the selected I/O standards, power-supply assignments, and configuration used by the FPGA design.
What is the maximum frequency of the EP2C15AF256A7N?
The EP2C15AF256A7N is rated at a maximum device frequency of 402.58 MHz according to the Cyclone II family information in the product listings. Device frequency is a key FPGA timing parameter, but actual application throughput depends on the logic design, routing, I/O standard, memory access pattern, and timing constraints. Designers should use the applicable Quartus timing reports for the final implementation rather than treating 402.58 MHz as guaranteed system-clock performance.
What package does the EP2C15AF256A7N use?
The EP2C15AF256A7N uses a 256-LBGA package, also described as FBGA-256, with surface-mount construction. The manufacturer product information identifies the package as 256-LBGA. A large BGA footprint enables dense I/O access but requires controlled escape routing, power-plane geometry, and assembly capability. The package drawing and ball assignment in the manufacturer documentation should be used directly when creating the PCB footprint.
Is the EP2C15AF256A7N suitable for automotive applications?
The EP2C15AF256A7N is listed as an automotive AEC-Q100 device, making it an appropriate candidate for automotive electronic systems when the complete part qualification and operating-temperature requirements match the application. The catalog record specifically associates this ordering code with automotive-grade ordering. Before production use, confirm the exact temperature range, qualification status, and AEC-Q100 test coverage in the manufacturer datasheet and the relevant quality documentation.
Where can I download the EP2C15AF256A7N datasheet and pinout?
The EP2C15AF256A7N datasheet and pin information can be accessed through the Octopart datasheet listing or the component catalog page linked on this page. The exact 256-LBGA ball map and I/O assignments should be taken from the manufacturer datasheet rather than inferred from the ordering code. Use the pin-description table and package drawing to assign power, ground, configuration, clock, and user I/O connections before releasing the PCB layout.
What is the best drop-in replacement for the EP2C15AF256A7N?
The closest documented same-package alternatives are EP2C15AF256I8N and EP2C15AF256C6N, but neither should be treated as an unconditional drop-in replacement. Both remain in the EP2C15AF256 family and use the same 256-pin package identifier, while their suffix-specific grade, temperature, and operating characteristics differ from the A7N device. Confirm the complete pin map, voltage limits, temperature range, automotive qualification, and configuration behavior before substitution.
Can EP2C15AF256I8N replace EP2C15AF256A7N?
EP2C15AF256I8N can be considered as a same-family, same-package replacement candidate, but it is not automatically interchangeable in every design. The comparison identifies the same 256-LBGA package and the same 14,448-cell Cyclone II device family, while the I8N and A7N suffixes encode different ordering characteristics. Verify temperature grade, qualification, supply limits, and all BGA ball assignments before approving the substitution.
What is the difference between EP2C15AF256A7N and EP2C15AF256C6N?
EP2C15AF256A7N and EP2C15AF256C6N belong to the same EP2C15AF256 Cyclone II package family, but their suffixes identify different ordering options. The A7N listing is associated with automotive AEC-Q100 ordering, whereas the C6N comparison identifies a different grade and temperature suffix. The exact electrical, environmental, and qualification differences must be confirmed in the manufacturer ordering guide before using either device interchangeably.
When should I choose the EP2C15AF256A7N instead of EP2C15AF484A7N?
Choose the EP2C15AF256A7N when the design specifically requires the 256-LBGA footprint and can operate within its 14,448 logic-element and 152-I/O configuration. EP2C15AF484A7N uses a larger FBGA-484 package and is therefore not pin-compatible for a direct board substitution. The larger-package device should be selected only when its additional I/O and routing resources are needed and the PCB can be redesigned for the different footprint.
Is the EP2C15AF256A7N suitable for industrial control and communications designs?
The EP2C15AF256A7N is suitable for industrial control and communications designs when its 14,448 logic elements, 152 I/Os, 1.2 V core operation, and 402.58 MHz device rating satisfy the architecture. Its 256-LBGA package supports compact, high-pin-count implementations, but industrial temperature qualification and system-level EMC requirements must be checked separately. Use the exact suffix ratings to confirm environmental suitability.
How do I verify the EP2C15AF256A7N pinout for a PCB design?
Verify the EP2C15AF256A7N pinout in the manufacturer package drawing and pin-description table, then cross-check every power, ground, configuration, clock, and user I/O ball against the intended board netlist. The device uses a 256-LBGA package, so small differences in ball numbering can create difficult-to-debug assembly errors. Do not rely on generic FBGA drawings or comparison-site pin assignments when producing production artwork.
Where can I buy the EP2C15AF256A7N and check availability?
Use the Request a Quote form on this page to request current availability, lot traceability, and lead time for the EP2C15AF256A7N. The device is shown in distributor and catalog listings as an FPGA in a 256-LBGA package, but stock and delivery schedules can change by quantity and package condition. Provide the exact MPN, target quantity, and whether you require a tray presentation when submitting the request.
What is the price of the EP2C15AF256A7N?
Current unit pricing and volume pricing for the EP2C15AF256A7N should be requested through the Request a Quote form on this page. Price can depend on order quantity, inventory, delivery date, and traceability requirements for this 256-LBGA FPGA. The exact MPN EP2C15AF256A7N should be included in the request so that any quotation is matched to the intended grade, temperature option, and package configuration.
What is the lead time for the EP2C15AF256A7N?
The current lead time for the EP2C15AF256A7N should be confirmed through the Request a Quote form on this page. Lead time can change with order size, device availability, and whether the shipment must include inspection, traceability, or specific tray packaging. A complete request should state the required quantity, target delivery date, acceptable package condition, and any automotive or sourcing documentation needed for the application.

工程参考数据: EP2C15AF256A7N ——对比、设计指导和合规信息。

选型指南

Choose the EP2C15AF256A7N when the design requires a Cyclone II FPGA with 14,448 logic elements, 152 user I/Os, a 1.2 V core, and a 256-LBGA footprint, particularly for an automotive-associated design. EP2C15AF256I8N and EP2C15AF256C6N are the closest same-package alternatives because they share the EP2C15AF256 family and 256-ball format; review their suffix-specific temperature, qualification, and electrical characteristics before substitution. EP2C15AF484A7N retains the same listed logic density and 402.58 MHz class but uses an FBGA-484 package, so it requires a different PCB footprint and should be considered only during a deliberate board redesign. For new Cyclone II designs, confirm Quartus support, configuration requirements, memory-interface availability, and long-term sourcing before committing the layout.

与替代料对比

参数 本产品 EP2C15AF256I8N EP2C15AF256C6N EP2C15AF484A7N
Package 256-LBGA 256-LBGA 256-LBGA FBGA-484
Brand Altera Altera Altera Altera
Logic Elements 14,448 LEs 14,448 LEs 14,448 LEs 14,448 LEs
Maximum Device Frequency 402.58 MHz 402.58 MHz 402.58 MHz 402.58 MHz
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Ordering Suffix A7N I8N C6N A7N

关键差异点

  • Combines 14,448 logic elements with a 256-LBGA package (对比 EP2C15AF484A7N)
  • Provides 152 user I/Os in the specified 256-LBGA implementation (对比 EP2C15AF484A7N)
  • Automotive AEC-Q100 ordering is identified for the A7N configuration (对比 EP2C15AF256C6N)
  • Targets a 402.58 MHz device-frequency class (对比 EP2C15AF256C6N)

设计说明

Use the manufacturer 256-LBGA package drawing and ball map to create the PCB footprint. Plan escape routing for every power, ground, configuration, clock, and user I/O ball before placing other components. Provide continuous power and ground planes, route high-speed clocks as short differential or controlled-impedance paths, and avoid splitting return paths beneath the FPGA. Because the package is fine-pitch, assembly capability and via-in-pad or via-adjacent construction should be selected together with the board fabricator's process requirements.

Place the required core and I/O decoupling capacitors directly at the corresponding supply balls, with separate paths for the 1.2 V core and other required rails. Keep high-current switching-regulator loops away from sensitive FPGA and clock routes. The device's 1.2 V core rating does not describe every rail or its permitted tolerance, so confirm the complete power architecture against the manufacturer datasheet. Validate startup sequencing, rail monotonicity, and voltage limits before powering the assembled board.

Reserve a compact, contiguous configuration-memory interface near the FPGA because configuration data density can affect boot-time routing and signal integrity. Keep JTAG and configuration pins accessible for programming and diagnostics, and check their I/O voltage domains before attaching external tools. For a 402.58 MHz design target, use the Quartus timing report to review clock skew, fanout, and route congestion; the device-frequency figure is a family parameter, not a guarantee for every design.

Treat the 256-LBGA as a heat-transfer challenge because its underside limits top-side airflow and its many solder balls provide the primary thermal path into the PCB. Use a multilayer board with uninterrupted copper beneath the device, thermal vias according to assembly capability, and temperature sensors in critical systems. Validate junction temperature through Quartus power analysis and board-level thermal testing. Do not assume that the compact package permits high switching activity or elevated ambient temperature without thermal margin.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is identified by the LCSC product record, and the Arrow product listing identifies the device as an automotive AEC-Q100 option. Other compliance attributes are not established by the cited information.

相关搜索

EP2C15AF256A7N datasheet EP2C15AF256A7N pinout EP2C15AF256A7N datasheet pdf Altera EP2C15AF256A7N EP2C15AF256A7N equivalent EP2C15AF256A7N replacement EP2C15AF256A7N cross reference EP2C15AF256A7N footprint EP2C15AF256A7N price EP2C15AF256A7N stock EP2C15AF256A7N vs EP2C15AF256I8N EP2C15 256 LGA FPGA EP2C15 14448 logic elements EP2C15 402.58 MHz FPGA EP2C15 1.2 V automotive FPGA

相关元器件 & 术语

Altera Intel EP2C15AF256A7N EP2C15AF256I8N EP2C15AF256C6N EP2C15AF484A7N Cyclone II FPGA CPLD field-programmable gate array programmable-logic device digital integrated circuit semiconductor logic elements user I/O maximum device frequency core supply voltage 90 nm CMOS 256-LBGA FBGA-256 BGA surface mount AEC-Q100 RoHS Quartus
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情