FF2000R17T2P8 - 1700V 2000A XHP2 Half-Bridge IGBT | Infineon
MPN： FF2000R17T2P8 ✓ 啟用中FF2000R17T2P8 概覽
An IGBT (Insulated Gate Bipolar Transistor) module is a power semiconductor assembly that combines the MOSFET-like gate-drive simplicity of the insulated gate with the low on-state conduction losses of bipolar conduction. Within the power electronics hierarchy (IGBT module -> power semiconductor -> power conversion system), modules such as the FF2000R17T2P8 form the switching core of inverters that convert DC to AC and vice versa in industrial drives, wind converters, and traction systems.
Key features include the 1700 V collector-emitter rating, 2000 A nominal continuous collector current, half-bridge (2-in-1) topology, and XHP 2 construction with minimized internal stray inductance, which yields clean switching waveforms and reduced turn-off voltage overshoot. The IGBT8 die delivers low VCE(sat) and switching losses, while the EC8 diode provides soft recovery that lowers EMI stress. Short-circuit robustness and the onboard NTC support reliable protection and thermal monitoring.
Technically, the trench field-stop structure improves the trade-off between conduction and switching losses, enabling higher efficiency and greater power density than prior chip generations. The scalable XHP 2 multi-package housing simplifies paralleling and platform-level design reuse across a wide power range.
Typical applications include wind turbine full-converter systems, medium-voltage and large industrial motor drives, traction inverters, and high-power industrial power supplies, where efficiency, current density, and field reliability dominate the design.
Design consideration: gate-drive and thermal design dominate success. Provide adequate driver peak current and galvanic isolation, size the heatsink for module dissipation, and minimize DC-link stray inductance (adding snubbers where needed) to keep turn-off overshoot within the 1700 V rating.
This page synthesizes distributor sourcing data, drop-in alternative analysis, and practical high-power design notes not found in the Infineon datasheet; pricing references are as of 2026-09-11 and should be confirmed for volume quotes.
直接替換替代品，適用於 FF2000R17T2P8 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： FF2000R17T2P8 （相同外形與佔位） — 差異在於 Integrated Temperature Sensor, Mounting Type.
FF1400R17T2P8
✅ 直接替換聯絡詢價
查看資料表 →FF2000R17T2P8BPSA1
✅ 直接替換📋 參考替代品（不在目錄中）
FF2000R17T2P8 最大額定值與電氣特性
| 拓撲 | Half-Bridge (2-in-1) |
| Package Platform | XHP 2 (XHPTM2) |
| Collector-Emitter Voltage (VCES) | 1700 V |
| Nominal DC Collector Current | 2000 A |
| IGBT Technology | TRENCHSTOP IGBT8 trench field-stop |
| Diode Technology | Emitter controlled 8 (EC8) soft recovery |
| Integrated Temperature Sensor | NTC |
| 安裝類型 | Chassis Mount Module |
| Applications Grade | Industrial / traction / wind |
| Short-Circuit Capability | Short-circuit rated per datasheet |
| RoHS 狀態 | unknown |
FF2000R17T2P8 xhp 2 (xhptm2) 腳位配置指南
FF2000R17T2P8（xhp 2 (xhptm2) 封裝）的腳位配置。 此功率元件具有閘極、汲極與源極端子。對於非極性封裝，請參閱製造商資料表以取得確切的第 1 腳方向與佈局詳細資訊。常見應用包括電源設計、馬達驅動與負載切換。
無詳細腳位定義資料： FF2000R17T2P8.
請參閱 資料表 以查看完整腳位配置。
安全工作區
典型應用
FF2000R17T2P8 適用於 6 應用s: Wind Turbine Converters, Industrial Motor Drives, Traction Inverters, High-Power Industrial Power Supplies, Solar Central Inverters, Energy Storage Converters (PCS).
Wind Turbine Converters
The FF2000R17T2P8 fits wind turbine full-converter and grid-side inverter stages because its 1700 V rating supports 690 V AC systems with ample overshoot margin, while the 2000 A nominal current delivers multi-megawatt-class power per module bank. The IGBT8/EC8 chipset reduces conduction and switching losses, directly improving converter efficiency and reducing heatsink load in the nacelle. The XHP 2 low-inductive housing limits turn-off overshoot on long DC-link busbars typical of turbine layouts, and the integrated NTC feeds the controller for real-time thermal protection and derating, which is essential for the variable-load profile of wind energy conversion.
推薦
Industrial Motor Drives
In medium-voltage and large industrial motor drives, the FF2000R17T2P8 serves as the half-bridge switching element of the inverter stage. Its 1700 V blocking voltage covers standard 690 V AC drive DC links with margin, and the 2000 A rating supports large frame-size motors without paralleling. The IGBT8 trench field-stop die minimizes VCE(sat) for reduced conduction losses during long low-speed torque duty, while the EC8 soft-recovery diode limits di/dt-driven EMI into drive cabling. Low XHP 2 stray inductance enables snappy switching with bounded overshoot, and the onboard NTC supports drive-level thermal monitoring and protective derating logic.
推薦
Traction Inverters
Rail traction inverters demand high current density, robustness, and long service life, all met by the FF2000R17T2P8. The 1700 V rating matches the DC-link voltages of light-rail and metro converters, and 2000 A per module supports traction motors under heavy peak-torque demands such as acceleration out of stations. The XHP 2 scalable platform allows a single mechanical design language across power classes, easing fleet qualification, while the trench field-stop IGBT8 chipset balances efficiency against the rugged short-circuit behavior required in traction. The NTC sensor enables continuous thermal supervision in the constrained cooling environment of traction converters.
推薦
High-Power Industrial Power Supplies
High-power industrial power supplies, rectifiers, and DC fast-charging infrastructure use the FF2000R17T2P8 as the core switching element of phase legs in inverter or chopper stages. The 2000 A rating allows rack-level power scaling with fewer paralleled switches, improving current sharing predictability and reliability. Switching-loss reduction from IGBT8 improves efficiency at the high throughput typical of electrolysis, welding, and charging systems, and the EC8 diode soft recovery controls reverse-recovery EMI in compact layouts. XHP 2 low-inductance construction simplifies DC-link capacitor and busbar design, keeping overshoot inside the 1700 V window.
推薦
Solar Central Inverters
Utility-scale solar central inverters operating from 1000 V or 1500 V DC arrays benefit from the FF2000R17T2P8 in the grid-tie inverter stage where 1700 V blocking provides margin for DC-link transients. The 2000 A rating supports high per-module output power, reducing component count in megawatt-class inverters. IGBT8 conduction-loss improvements matter because solar inverters spend long periods at partial-to-full load where VCE(sat) losses dominate; the EC8 diode reduces turn-off losses on the complementary switch. The NTC enables inverter-level thermal management important for outdoor enclosures, and XHP 2 power density shrinks the overall inverter station footprint.
推薦
Energy Storage Converters (PCS)
Battery energy storage power conversion systems (PCS) run bidirectional DC-AC conversion between battery banks and the grid, where the FF2000R17T2P8 provides the half-bridge switching core. The 1700 V rating suits high-voltage battery strings, and 2000 A supports the high discharge rates storage systems must deliver during grid events. Round-trip efficiency is directly improved by the IGBT8/EC8 chipset's reduced losses, which also lowers cooling demand in containerized PCS enclosures. Low XHP 2 stray inductance bounds overshoot on aggressive charge/discharge switching, and the integrated NTC plus short-circuit ruggedness protect against fault conditions during fast transient operation.
推薦
推薦產品摘要
工程參考資料，適用於 FF2000R17T2P8 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | FF1400R17T2P8 | FF2000R17T2P8BPSA1 |
|---|---|---|---|
| Package | XHP 2 chassis-mount module | XHP 2 - same | XHP 2 - same |
| Brand | Infineon | Infineon | Infineon |
| VCES Blocking Voltage | 1700 V | 1700 V | 1700 V |
| Nominal Current | 2000 A | 1400 A | 2000 A |
| Topology | Half-Bridge (2-in-1) | Half-Bridge (2-in-1) | Half-Bridge (2-in-1) |
| IGBT Chipset | TRENCHSTOP IGBT8 | TRENCHSTOP IGBT8 | TRENCHSTOP IGBT8 |
| Diode Chipset | EC8 emitter controlled | EC8 emitter controlled | EC8 emitter controlled |
| Integrated NTC | Yes | Yes | Yes |
| Typical Applications | Wind, traction, large drives | Wind, traction, drives (lower power) | Wind, traction, large drives |
主要差異化特點
- 30% higher nominal current in identical footprint (對比FF1400R17T2P8)
- Latest-generation chipset (對比FF1400R17T2P8)
- Integrated NTC thermal sensing (對比FF2000R17T2P8BPSA1)
設計說明
Estimated: DC-link stray inductance is the dominant failure driver for a 2000 A switch. At turn-off di/dt of several kA/us, even 50 nH of busbar inductance produces hundreds of volts of overshoot on top of the DC-link voltage. Keep total commutation-loop inductance as low as the XHP 2 design allows, laminate the DC-link busbar with overlapping positive/negative plates, and place DC-link capacitors directly over the module terminals. Verify measured overshoot at maximum load current stays below the 1700 V VCES rating with margin.
Estimated: at 2000 A operation, conduction losses from VCE(sat) alone are on the order of a few kilowatts per switch position, so heatsink and coolant sizing dominate reliability. Use the RthJC values from the Infineon datasheet to compute junction temperature rise for your switching frequency and duty cycle, and include diode reverse-recovery losses on the complementary device. The integrated NTC reads substrate-adjacent temperature, not true junction temperature; apply the datasheet offset between NTC and junction when setting derating thresholds.
Use a gate driver with adequate peak current and galvanic isolation for the XHP 2 module; undersized drivers stretch switching transitions and inflate losses. Respect negative gate bias during off-state to prevent parasitic turn-on from Miller coupling in the half-bridge, especially at the high di/dt this module enables. Implement the datasheet short-circuit detection window (desaturation monitoring) in the driver, since the module is short-circuit rated only for the specified duration. Never rely on the NTC alone for fast overcurrent protection.
合規資訊
Compliance data not stated in provided web data; consult the official Infineon datasheet and product page for RoHS/REACH status of the FF2000R17T2P8.
