ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas
MPN: ICS601G-21 ✓ 啟用中ICS601G-21 概覽
A clock multiplier is a clock-and-timing IC that generates one or more related output clocks from an input reference. It sits within the broader clock generation and frequency synthesis hierarchy, where clock generator ICs, phase-locked loops, and multipliers provide stable timing references for digital logic, serial links, converters, and communication transceivers. The ICS601G-21 is positioned as a low-cost, low-phase-noise, high-performance multiplier for designs where timing quality is important.
The primary performance benefit is clock multiplication with low phase noise. Lower phase noise can reduce timing uncertainty in high-speed digital paths, while low jitter is valuable for clocking oscillators, converters, communication interfaces, and sampling systems. The 220 MHz maximum frequency also allows the multiplier to support demanding clock trees where the input reference operates below the final required output frequency. The 16-TSSOP surface-mount package supports compact PCB layouts and automated manufacturing.
The device uses CMOS-compatible signals and a 3.0 V to 3.6 V supply range. These characteristics make it straightforward to pair with modern 3.3 V logic when signal levels, timing margins, and output-drive requirements are compatible. Designers should confirm the input and output frequency ranges, output configuration, clock-edge relationship, and load requirements from the manufacturer datasheet before finalizing a circuit.
Typical uses include low-skew clock distribution for embedded processors, frequency generation for communication equipment, clocking in industrial automation systems, and reference-clock multiplication in test and measurement designs. In a fanout arrangement, the multiplier can create related clock outputs that are easier to distribute than attempting to fan out a high-frequency source directly. This approach helps preserve clock quality across multiple loads when the board layout is designed carefully.
PCB layout is critical for any low-noise timing circuit. Keep the reference input, multiplier output, supply connections, and decoupling capacitors short, and route clock traces away from high-current switching nodes and noisy digital signals. Provide local supply bypassing and use a controlled ground return path to reduce power-supply noise and crosstalk. The device can be considered for industrial or communications designs, but qualification requirements for automotive, aerospace, or other specialized environments must be confirmed separately.
The ICS601G-21 is a compact clock-and-timing solution for designs that need a multiplier with a 220 MHz maximum frequency, CMOS interfaces, and a 16-TSSOP package. Its low phase-noise positioning is useful when the clock source must be multiplied before distribution or when a system requires cleaner timing than a simple divider or general-purpose clock source provides. Final selection should account for the required multiplication ratio, output frequency, jitter, load capacitance, supply voltage, and clock-tree topology.
直接替換替代品,適用於 ICS601G-21 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ICS601G-21T
✅ 直接替換📋 參考替代品(不在目錄中)
601G-21LF
✅ 直接替換📋 參考替代品(不在目錄中)
ICS601G-01T
✅ 直接替換📋 參考替代品(不在目錄中)
ICS601G-21 規格
| Device Type | Clock/Frequency Synthesizer, Clock Generator IC |
| 功能 | Clock multiplier |
| Maximum Frequency | 220 MHz |
| Multiplication Ratio | 1 to 5 |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Logic Type | CMOS |
| 封裝 | 16-TSSOP, 0.173 inch width, 4.40 mm width |
| 安裝類型 | Surface Mount |
ICS601G-21 16-tssop, 0.173 inch width, 4.40 mm width 腳位配置指南
ICS601G-21(16-tssop, 0.173 inch width, 4.40 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ICS601G-21.
請參閱 資料表 以查看完整腳位配置。
典型應用
ICS601G-21 適用於 6 應用s: Processor Clock Fanout, Communication Interface Clocking, Industrial Control Timing, Sampling and Data Acquisition, Test and Measurement Equipment, Low-Skew Clock Distribution.
Processor Clock Fanout
The ICS601G-21 is appropriate for distributing related processor clocks when the design needs multiplication rather than independent frequency generation. Its 1-to-5 multiplier range and listed 220 MHz maximum frequency allow a lower-frequency reference to be multiplied before it reaches multiple digital loads. The 16-TSSOP package keeps the device compact, while CMOS signaling supports integration with 3.3 V logic. Place the reference and clock outputs close to their destinations, use short traces, and maintain a continuous return path to limit skew and supply noise.
推薦
Communication Interface Clocking
The ICS601G-21 can support communication systems that require a multiplied reference clock with low phase noise and low jitter. The verified description specifically identifies low phase noise, low jitter, and low-skew fanout as target characteristics, making the part relevant to serial links, transceivers, and clock-recovery blocks. Its 220 MHz maximum frequency and 1-to-5 ratio provide a straightforward way to derive a higher clock from an established reference. Validate output drive, load capacitance, and interface timing before integrating it with a specific communications device.
推薦
Industrial Control Timing
Industrial controllers often need a dependable reference clock distributed across processing, conversion, and communications subsystems. The ICS601G-21's CMOS interface, 3.0 V to 3.6 V supply range, 1-to-5 multiplication capability, and 220 MHz maximum frequency make it a candidate for compact 3.3 V control boards. The low-phase-noise description can help preserve timing quality in demanding digital systems. Keep the clock network isolated from switching power stages and motor-control nodes, and verify operating-temperature requirements against the specific system enclosure.
推薦
Sampling and Data Acquisition
The ICS601G-21 can be used where a stable, multiplied clock is needed by sampling or data-conversion systems. Low phase noise and low jitter are useful when the clock contributes directly to sampling timing, while the 1-to-5 ratio allows a common reference to produce several derived timing domains. The listed 220 MHz ceiling provides useful design headroom for moderate-speed conversion systems. The engineer should confirm output frequency limits, jitter, and load capacitance in the manufacturer datasheet and account for trace and connector delay in the sampling architecture.
推薦
Test and Measurement Equipment
The ICS601G-21 is suitable for test and measurement equipment that needs a low-noise reference multiplied into a higher-rate clock. The compact 16-TSSOP package supports dense instrument layouts, and the device's stated low-phase-noise, low-jitter characteristics are valuable for coherent signal generation, digitizers, and calibration systems. A 3.3 V supply operation simplifies interface with modern CMOS logic. Keep sensitive clock routing away from relay drivers, power-converter switches, and display circuitry, and validate the final timing margin across temperature and supply tolerance.
推薦
Low-Skew Clock Distribution
The ICS601G-21 is designed with low-skew fanout as a target use case, allowing a multiplied clock to feed several destinations more effectively than direct high-frequency fanout. This makes it relevant to digital backplanes, control logic, and multi-channel clock trees where timing alignment affects system behavior. The 16-TSSOP package provides a small footprint, while the 220 MHz maximum frequency supports common digital clocking rates. Preserve matching topology and ground references between outputs, and use controlled impedance routing when the clock edges have high significance.
推薦
推薦產品摘要
工程參考資料,適用於 ICS601G-21 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ICS601G-21T | 601G-21LF | ICS601G-01T |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-TSSOP, 0.173 inch width, 4.40 mm width | 16-TSSOP, 0.173 inch width, 4.40 mm width | 16-TSSOP, 0.173 inch width, 4.40 mm width | 16-TSSOP |
| Device Type | Clock/Frequency Synthesizer, Clock Generator IC | Clock Multiplier | Clock/Frequency Synthesizer, Clock Generator IC | Clock Multiplier |
| Surface Mount Package | Yes | Yes | Yes | Yes |
主要差異化特點
- Directly identified as a low-phase-noise 1-to-5 clock multiplier (對比ICS601G-01T)
- Confirmed 220 MHz maximum frequency in the same 16-TSSOP footprint (對比601G-21LF)
- Exact catalog identity with a 16-TSSOP clock-generator listing (對比ICS601G-21T)
設計說明
Keep the reference input, multiplier outputs, supply pins, and decoupling capacitors close to the ICS601G-21. Route clock traces as controlled-impedance paths where edge rate matters, maintain a continuous ground reference beneath the clock network, and avoid crossings with switching-regulator, motor-drive, and high-speed data paths. For multiple outputs, preserve symmetrical routing where skew is critical.
Do not assume that two devices with the same 16-TSSOP outline are automatically interchangeable. Confirm the manufacturer pinout, input and output frequency limits, multiplication ratio, supply range, output-drive capability, and load capacitance for ICS601G-21T, 601G-21LF, or ICS601G-01T before replacing the target. Validate the complete clock tree at the intended input frequency, load, and operating temperature.
Place the local bypass capacitor at the supply pins with a short, low-inductance connection and provide adequate ground return. Although the listed operating range is 3.0 V to 3.6 V, clock noise and supply ripple can affect phase noise and jitter. Review the manufacturer recommendations for bypass capacitance and use a quiet reference source when the downstream circuit has demanding timing requirements.
合規資訊
Compliance information is not stated in the verified manufacturer or distributor material.