Renesas Electronics

ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas

부품 번호: ICS601G-21 ✓ 활성
3.0 V to 3.6 V Vdss 16-TSSOP, 0.173 inch width, 4.40 mm width Package 220 MHz Speed
MOQ: 1 |

ICS601G-21 개요

The Renesas Electronics ICS601G-21 is a low-phase-noise clock multiplier and clock generator IC designed for applications requiring low jitter, low phase noise, and low-skew fanout. The verified product listing identifies a maximum operating frequency of 220 MHz and a 16-pin TSSOP package with a 4.40 mm body width. The device operates from a 3.0 V to 3.6 V CMOS supply, making it suitable for modern digital systems, processor clocking, communications equipment, and industrial control designs.

A clock multiplier is a clock-and-timing IC that generates one or more related output clocks from an input reference. It sits within the broader clock generation and frequency synthesis hierarchy, where clock generator ICs, phase-locked loops, and multipliers provide stable timing references for digital logic, serial links, converters, and communication transceivers. The ICS601G-21 is positioned as a low-cost, low-phase-noise, high-performance multiplier for designs where timing quality is important.

The primary performance benefit is clock multiplication with low phase noise. Lower phase noise can reduce timing uncertainty in high-speed digital paths, while low jitter is valuable for clocking oscillators, converters, communication interfaces, and sampling systems. The 220 MHz maximum frequency also allows the multiplier to support demanding clock trees where the input reference operates below the final required output frequency. The 16-TSSOP surface-mount package supports compact PCB layouts and automated manufacturing.

The device uses CMOS-compatible signals and a 3.0 V to 3.6 V supply range. These characteristics make it straightforward to pair with modern 3.3 V logic when signal levels, timing margins, and output-drive requirements are compatible. Designers should confirm the input and output frequency ranges, output configuration, clock-edge relationship, and load requirements from the manufacturer datasheet before finalizing a circuit.

Typical uses include low-skew clock distribution for embedded processors, frequency generation for communication equipment, clocking in industrial automation systems, and reference-clock multiplication in test and measurement designs. In a fanout arrangement, the multiplier can create related clock outputs that are easier to distribute than attempting to fan out a high-frequency source directly. This approach helps preserve clock quality across multiple loads when the board layout is designed carefully.

PCB layout is critical for any low-noise timing circuit. Keep the reference input, multiplier output, supply connections, and decoupling capacitors short, and route clock traces away from high-current switching nodes and noisy digital signals. Provide local supply bypassing and use a controlled ground return path to reduce power-supply noise and crosstalk. The device can be considered for industrial or communications designs, but qualification requirements for automotive, aerospace, or other specialized environments must be confirmed separately.

The ICS601G-21 is a compact clock-and-timing solution for designs that need a multiplier with a 220 MHz maximum frequency, CMOS interfaces, and a 16-TSSOP package. Its low phase-noise positioning is useful when the clock source must be multiplied before distribution or when a system requires cleaner timing than a simple divider or general-purpose clock source provides. Final selection should account for the required multiplication ratio, output frequency, jitter, load capacitance, supply voltage, and clock-tree topology.

드롭인 대체품: ICS601G-21 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ICS601G-21T

✅ 드롭인
📦 16-TSSOP
Same 16-TSSOP clock-multiplier package and stated 220 MHz class; exact ordering and electrical details differ by suffix and require datasheet confirmation

📋 참조 대체품 (카탈로그에 없음)

601G-21LF

✅ 드롭인
📦 16-TSSOP
Same 16-TSSOP package and stated 220 MHz maximum frequency; exact pin and electrical differences are not stated in the verified listing

📋 참조 대체품 (카탈로그에 없음)

ICS601G-01T

✅ 드롭인
📦 16-TSSOP
Same 16-TSSOP clock-multiplier family and listed as a related 1-to-5 multiplier; frequency, pin, and ratio differences require manufacturer confirmation

📋 참조 대체품 (카탈로그에 없음)

ICS601G-21 사양

Device Type Clock/Frequency Synthesizer, Clock Generator IC
기능 Clock multiplier
Maximum Frequency 220 MHz
Multiplication Ratio 1 to 5
Supply Voltage Range 3.0 V to 3.6 V
Logic Type CMOS
패키지 16-TSSOP, 0.173 inch width, 4.40 mm width
실장 유형 Surface Mount

ICS601G-21 16-tssop, 0.173 inch width, 4.40 mm width 핀 구성 가이드

ICS601G-21(16-tssop, 0.173 inch width, 4.40 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ICS601G-21의 16-tssop, 0.173 inch width, 4.40 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICS601G-21.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICS601G-21 적합 용도: 6 애플리케이션s: Processor Clock Fanout, Communication Interface Clocking, Industrial Control Timing, Sampling and Data Acquisition, Test and Measurement Equipment, Low-Skew Clock Distribution.

🖥️

Processor Clock Fanout

The ICS601G-21 is appropriate for distributing related processor clocks when the design needs multiplication rather than independent frequency generation. Its 1-to-5 multiplier range and listed 220 MHz maximum frequency allow a lower-frequency reference to be multiplied before it reaches multiple digital loads. The 16-TSSOP package keeps the device compact, while CMOS signaling supports integration with 3.3 V logic. Place the reference and clock outputs close to their destinations, use short traces, and maintain a continuous return path to limit skew and supply noise.

🌐

Communication Interface Clocking

The ICS601G-21 can support communication systems that require a multiplied reference clock with low phase noise and low jitter. The verified description specifically identifies low phase noise, low jitter, and low-skew fanout as target characteristics, making the part relevant to serial links, transceivers, and clock-recovery blocks. Its 220 MHz maximum frequency and 1-to-5 ratio provide a straightforward way to derive a higher clock from an established reference. Validate output drive, load capacitance, and interface timing before integrating it with a specific communications device.

🏭

Industrial Control Timing

Industrial controllers often need a dependable reference clock distributed across processing, conversion, and communications subsystems. The ICS601G-21's CMOS interface, 3.0 V to 3.6 V supply range, 1-to-5 multiplication capability, and 220 MHz maximum frequency make it a candidate for compact 3.3 V control boards. The low-phase-noise description can help preserve timing quality in demanding digital systems. Keep the clock network isolated from switching power stages and motor-control nodes, and verify operating-temperature requirements against the specific system enclosure.

📟

Sampling and Data Acquisition

The ICS601G-21 can be used where a stable, multiplied clock is needed by sampling or data-conversion systems. Low phase noise and low jitter are useful when the clock contributes directly to sampling timing, while the 1-to-5 ratio allows a common reference to produce several derived timing domains. The listed 220 MHz ceiling provides useful design headroom for moderate-speed conversion systems. The engineer should confirm output frequency limits, jitter, and load capacitance in the manufacturer datasheet and account for trace and connector delay in the sampling architecture.

🔧

Test and Measurement Equipment

The ICS601G-21 is suitable for test and measurement equipment that needs a low-noise reference multiplied into a higher-rate clock. The compact 16-TSSOP package supports dense instrument layouts, and the device's stated low-phase-noise, low-jitter characteristics are valuable for coherent signal generation, digitizers, and calibration systems. A 3.3 V supply operation simplifies interface with modern CMOS logic. Keep sensitive clock routing away from relay drivers, power-converter switches, and display circuitry, and validate the final timing margin across temperature and supply tolerance.

⚡

Low-Skew Clock Distribution

The ICS601G-21 is designed with low-skew fanout as a target use case, allowing a multiplied clock to feed several destinations more effectively than direct high-frequency fanout. This makes it relevant to digital backplanes, control logic, and multi-channel clock trees where timing alignment affects system behavior. The 16-TSSOP package provides a small footprint, while the 220 MHz maximum frequency supports common digital clocking rates. Preserve matching topology and ground references between outputs, and use controlled impedance routing when the clock edges have high significance.

추천 제품 요약

ICS601G-21T Related 16-TSSOP clock multiplier 사용처: Processor Clock Fanout, Communication Interface Clocking, Industrial Control Timing, Sampling and Data Acquisition, Test and Measurement Equipment, Low-Skew Clock Distribution 601G-21LF 220 MHz 16-TSSOP clock generator candidate 사용처: Processor Clock Fanout, Industrial Control Timing, Test and Measurement Equipment, Low-Skew Clock Distribution ICS601G-01T Related 16-TSSOP multiplier candidate 사용처: Communication Interface Clocking, Sampling and Data Acquisition
What is the ICS601G-21 used for?
The ICS601G-21 is a low-phase-noise clock multiplier and clock generator IC for producing related clock outputs from an input reference. According to the manufacturer-related product description, it is intended for applications requiring low phase noise, low jitter, and low-skew fanout. The device supports clock multiplication ratios from 1 to 5 and is listed with a maximum frequency of 220 MHz in a 16-TSSOP package.
What is the maximum frequency of the ICS601G-21?
The Renesas Electronics ICS601G-21 is listed with a maximum frequency of 220 MHz. The verified DigiKey product listing identifies the device as a clock/frequency synthesizer and clock generator IC rated to 220 MHz. Actual operating conditions must remain within the input and output frequency limits specified in the manufacturer datasheet.
What supply voltage does the ICS601G-21 require?
The ICS601G-21 operates from a 3.0 V to 3.6 V supply, as identified in the technical description for the related ICS601G-21I listing. Because the exact target-device electrical details must be confirmed in the manufacturer datasheet, use the 3.3 V rail as the nominal operating point only after checking the specific part's supply limits and timing requirements.
What package does the ICS601G-21 use?
The ICS601G-21 is supplied in a 16-TSSOP surface-mount package. The verified product listing specifies a 16-TSSOP package with a 0.173-inch, 4.40 mm body width. The matching package library key is tssop-16, and the pin arrangement should be taken from the manufacturer datasheet when assigning PCB tracks.
Is the ICS601G-21 a PLL or a clock multiplier?
The ICS601G-21 is primarily a low-phase-noise clock multiplier. The product description identifies it as a low-cost, low-phase-noise, high-performance clock synthesizer, and the product listing classifies it as a clock/frequency synthesizer and clock generator IC. Its 1-to-5 multiplication capability distinguishes its intended clock-generation role from a conventional fixed-frequency divider.
Where can I download the ICS601G-21 datasheet PDF?
The ICS601G-21 datasheet can be accessed through the official product and technical-document links associated with the Renesas Electronics Corporation listing. The verified Octopart result also provides a datasheet access page for ICS601G-21. Use the manufacturer datasheet for the authoritative pinout, electrical limits, timing characteristics, and recommended application circuit.
Where can I find the ICS601G-21 pinout?
The ICS601G-21 uses a 16-TSSOP package, and its authoritative pin names and electrical functions should be taken from the manufacturer datasheet. The verified package information identifies a 16-TSSOP outline with a 4.40 mm width, while the manufacturer datasheet is the correct source for numbered pin assignments, power connections, clock inputs, and outputs.
What is the difference between the ICS601G-21 and ICS601G-21T?
The ICS601G-21 is the base catalog listing and the ICS601G-21T is a distinct ordering code associated with the same clock-multiplier family. The verified distributor result confirms that ICS601G-21T is available in a 16-TSSOP package, but it does not state that every electrical parameter is identical. Check the manufacturer ordering table before treating the two order codes as interchangeable.
Can the 601G-21LF replace the ICS601G-21?
The 601G-21LF is identified by a verified distributor listing as a 220 MHz clock/frequency synthesizer in a 16-TSSOP package, making it a close functional candidate. However, the listing does not explicitly establish complete pin-to-pin compatibility or every operating parameter. Compare the manufacturer pinout, supply voltage, frequency limits, and output behavior before approving it as a drop-in replacement.
What is the best drop-in replacement for the ICS601G-21?
No complete drop-in replacement can be confirmed from the verified cross-reference results alone. ICS601G-21T and 601G-21LF appear in the same 16-TSSOP family, while ICS601G-01T appears in a 16-TSSOP clock-multiplier comparison, but the available results do not state that any cross-brand device is pin-compatible. Validate the manufacturer pinout and timing specifications before substitution.
Can an ICS601G-01T replace an ICS601G-21?
The ICS601G-01T may be a related 16-TSSOP clock multiplier, but the verified comparison result does not confirm identical pinout, multiplication ratios, frequency limits, or output behavior. It should therefore be treated as a candidate rather than a confirmed drop-in replacement. Compare the two manufacturer datasheets and validate critical timing, supply, and fanout specifications.
When should I choose the ICS601G-21 over a conventional clock generator?
Choose the ICS601G-21 when the design specifically benefits from a low-phase-noise clock multiplier with a 1-to-5 multiplication capability and up to 220 MHz maximum frequency. A conventional clock generator may be preferable when the required output is unrelated to the input reference or when a programmable frequency range is essential. The correct choice depends on the required output frequency, clock topology, load, and jitter budget.
Is the ICS601G-21 suitable for communication equipment?
The ICS601G-21 can be suitable for communication equipment that needs a low-phase-noise, low-jitter clock source in a 3.3 V system. Its listed 220 MHz maximum frequency, CMOS signaling, and 1-to-5 multiplication ratio are useful for clocking communications blocks. The final decision requires checking output drive, load capacitance, output frequency range, and interface timing for the specific transceiver or controller.
What are the key specifications of ICS601G-21 that engineers should know?
The key engineering specifications for the ICS601G-21 are its clock-multiplier function, 1-to-5 multiplication ratio, 220 MHz maximum frequency, CMOS logic, 3.0 V to 3.6 V supply range, and 16-TSSOP package. The device is described as a low-cost, low-phase-noise clock synthesizer for low-jitter and low-skew fanout. Input and output frequency limits, jitter, phase noise, and load specifications should be confirmed in the manufacturer datasheet.
Where can I buy the ICS601G-21 and check its price?
The ICS601G-21 can be sourced through the Request a Quote form on this page, where the current commercial terms can be requested for the exact MPN. The verified listing confirms the part is categorized as a Renesas Electronics Corporation clock generator, but the current price, stock status, and lead time should be obtained through that quote request rather than from a static listing.
How long is the lead time for the ICS601G-21?
The current lead time for the exact ICS601G-21 should be requested through the Request a Quote form on this page. The verified distributor result identifies the product and its 220 MHz, 16-TSSOP characteristics, but the available information does not state a fixed factory lead time. Requesting the quote allows current availability and scheduling information to be confirmed against the exact order code.

엔지니어링 참조 데이터: ICS601G-21 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ICS601G-21 when the system specifically needs a low-phase-noise clock multiplier that can multiply a reference by 1 to 5 and operate up to 220 MHz. It is a logical fit for compact 3.3 V clock trees, communication interfaces, industrial controls, and test equipment where low jitter and low skew are important. ICS601G-21T is the closest same-brand ordering-code candidate, but its suffix-specific electrical characteristics must be checked before substitution. Select 601G-21LF only after confirming its pinout and operating data against the target. ICS601G-01T should be treated as a related family candidate rather than an automatic replacement because its verified comparison does not confirm identical phase-noise, frequency, or pin behavior. For any substitution, review the manufacturer datasheet, preserve the 16-TSSOP land pattern, and validate timing at the intended input frequency, output load, supply range, and temperature.

대체품과의 비교

파라미터 이 제품 ICS601G-21T 601G-21LF ICS601G-01T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-TSSOP, 0.173 inch width, 4.40 mm width 16-TSSOP, 0.173 inch width, 4.40 mm width 16-TSSOP, 0.173 inch width, 4.40 mm width 16-TSSOP
Device Type Clock/Frequency Synthesizer, Clock Generator IC Clock Multiplier Clock/Frequency Synthesizer, Clock Generator IC Clock Multiplier
Surface Mount Package Yes Yes Yes Yes

주요 차별점

  • Directly identified as a low-phase-noise 1-to-5 clock multiplier (vs ICS601G-01T)
  • Confirmed 220 MHz maximum frequency in the same 16-TSSOP footprint (vs 601G-21LF)
  • Exact catalog identity with a 16-TSSOP clock-generator listing (vs ICS601G-21T)

설계 노트

Keep the reference input, multiplier outputs, supply pins, and decoupling capacitors close to the ICS601G-21. Route clock traces as controlled-impedance paths where edge rate matters, maintain a continuous ground reference beneath the clock network, and avoid crossings with switching-regulator, motor-drive, and high-speed data paths. For multiple outputs, preserve symmetrical routing where skew is critical.

Do not assume that two devices with the same 16-TSSOP outline are automatically interchangeable. Confirm the manufacturer pinout, input and output frequency limits, multiplication ratio, supply range, output-drive capability, and load capacitance for ICS601G-21T, 601G-21LF, or ICS601G-01T before replacing the target. Validate the complete clock tree at the intended input frequency, load, and operating temperature.

Place the local bypass capacitor at the supply pins with a short, low-inductance connection and provide adequate ground return. Although the listed operating range is 3.0 V to 3.6 V, clock noise and supply ripple can affect phase noise and jitter. Review the manufacturer recommendations for bypass capacitance and use a quiet reference source when the downstream circuit has demanding timing requirements.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance information is not stated in the verified manufacturer or distributor material.

관련 검색

ICS601G-21 datasheet ICS601G-21 pinout ICS601G-21 datasheet pdf ICS601G-21 equivalent ICS601G-21 replacement ICS601G-21 cross reference ICS601G-21 vs ICS601G-01T ICS601G-21 footprint ICS601G-21 price ICS601G-21 stock Renesas ICS601G-21 ICS601G 16-TSSOP clock multiplier ICS601G-21 220 MHz clock ICS601G-21 low phase noise ICS601G-21 application circuit

관련 부품 & 용어

Renesas Electronics ICS601G-21 ICS601G-21T 601G-21LF ICS601G-01T Clock Multiplier Clock Generator IC Clock/Frequency Synthesizer Phase-Locked Loop Timing IC Integrated Circuit Low Phase Noise Low Jitter Low-Skew Fanout CMOS 16-TSSOP TSSOP Family Surface Mount Technology Clock Tree Communication Interface Industrial Control Test and Measurement Equipment Data Acquisition Supply Voltage Clock Multiplication
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기