INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
MPN： INA101AM ✓ 啟用中INA101AM 概覽
An instrumentation amplifier is a specialized differential amplifier optimized for measuring small differential signals that are superimposed on a much larger common-mode voltage. Its internal resistor network and matched amplifiers provide predictable gain, high input impedance, and accurate rejection of common-mode interference. This makes the INA101AM suitable for sensor interfaces, strain gauges, thermocouples, RTDs, bridge transducers, and general instrumentation systems where signal integrity and measurement stability are important.
The INA101AM datasheet highlights very low drift of 0.25 mV/°C maximum, low offset voltage of 25 mV maximum as identified in the verified distributor result, low nonlinearity of 0.002%, low noise of 13 nV/√Hz, and high common-mode rejection of 106 dB at 60 Hz. The available technical reference also describes a bandwidth of approximately 300 kHz and a high input impedance of 10 GΩ. These specifications support precision amplification of low-level sensor signals while preserving fast transient response.
The monolithic three-op-amp architecture and laser-trimmed resistors reduce component count and simplify instrumentation-amplifier implementation. The INA101AM is intended for applications requiring accurate differential measurement, including industrial process control, test and measurement equipment, medical instrumentation, load-cell interfaces, and remote sensor acquisition. The TO-100-10 mechanical package supports through-hole assembly and provides a practical option for legacy and industrial equipment designs.
A key design consideration is ensuring that input common-mode voltage and supply voltage remain within the datasheet limits. The gain-setting resistor and external input and feedback components should be selected with suitable tolerance and stability. Input filtering, guarding, grounding, and keeping sensor wiring away from high-current conductors can further improve repeatability and rejection of unwanted interference.
This product page consolidates the verified Texas Instruments, DigiKey, Mouser, and distributor information with practical application guidance, package details, and engineering-oriented selection information for engineers evaluating the INA101AM.
直接替換替代品，適用於 INA101AM — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： INA101AM （相同外形與佔位） — 差異在於 Package, Mounting Type, Bandwidth, Input Impedance, Architecture.
INA101AG
✅ 直接替換聯絡詢價
查看資料表 →INA101SM
✅ 直接替換聯絡詢價
查看資料表 →INA101KU
✅ 直接替換聯絡詢價
查看資料表 →INA101P
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
INA101U
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
INA101AM 最大額定值與電氣特性
| Product Type | Instrumentation Amplifier |
| Number of Channels | 1 channel |
| Architecture | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Input Type | Differential |
| Maximum Supply Voltage | ±20 V |
| Offset Voltage | 25 mV maximum |
| Input Drift | 0.25 mV/°C maximum |
| Nonlinearity | 0.002% |
| 雜訊密度 | 13 nV/√Hz |
| Common-Mode Rejection Ratio | 106 dB at 60 Hz |
| Input Impedance | 10 GΩ |
| Bandwidth | Approximately 300 kHz |
| 封裝 | TO-100-10 |
| 安裝類型 | Through-hole |
| Application Areas | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
INA101AM to-100-10 腳位配置指南
INA101AM（to-100-10 封裝）的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料： INA101AM.
請參閱 資料表 以查看完整腳位配置。
典型應用
INA101AM 適用於 6 應用s: Strain-Gauge Bridge Measurement, Thermocouple Signal Conditioning, RTD Temperature Measurement, Precision Data Acquisition, Medical and Diagnostic Instrumentation, Load-Cell and Force Measurement.
Strain-Gauge Bridge Measurement
The INA101AM fits strain-gauge front ends because its differential instrumentation-amplifier architecture rejects common-mode bridge excitation while presenting a verified 10 GΩ input impedance. Its 106 dB CMRR at 60 Hz and 13 nV/√Hz noise density help preserve the small millivolt-level changes produced by a resistive bridge. Place the device close to the bridge, use symmetric routing, and confirm the applicable gain equation and supply limits in the manufacturer datasheet before finalizing the resistor values.
推薦
Thermocouple Signal Conditioning
INA101AM can condition the low-level differential output of a thermocouple while rejecting common-mode voltage present on industrial wiring. Its high input impedance limits sensor-loading error, and its verified 25 mV maximum offset and 0.25 mV/°C maximum drift are important considerations for temperature measurement. The circuit also needs cold-junction compensation, input protection, and carefully selected gain so that the usable thermocouple range is not saturated.
推薦
RTD Temperature Measurement
The INA101AM is suitable for resistive temperature detector bridges because differential measurement reduces sensitivity to supply and ground disturbances encountered along remote sensor wiring. Its verified 106 dB common-mode rejection at 60 Hz supports stable operation in electrically noisy environments, while the approximately 300 kHz bandwidth provides ample response for typical thermal systems. Use a precision excitation source and calculate lead-wire compensation and self-heating before applying the available gain.
推薦
Precision Data Acquisition
INA101AM provides a compact single-channel instrumentation front end for laboratory and industrial data-acquisition systems. Differential input handling, 10 GΩ input impedance, and 106 dB common-mode rejection are useful when the source is small and a substantial offset voltage exists between the two input nodes. The approximately 300 kHz bandwidth supports general-purpose acquisition rather than ultra-high-speed sensing, making system-level aliasing and reference accuracy central design considerations.
推薦
Medical and Diagnostic Instrumentation
The INA101AM can amplify small differential physiological or diagnostic sensor signals where high input impedance and common-mode rejection improve measurement integrity. Its verified 13 nV/√Hz noise density and 0.002% nonlinearity make it relevant to high-resolution front ends, although actual signal-chain suitability depends on the sensor bandwidth, electrode impedance, and safety isolation architecture. A medical design should separately validate patient protection, isolation, leakage current, and applicable regulatory requirements.
推薦
Load-Cell and Force Measurement
INA101AM is appropriate for load-cell bridges that generate small differential voltages under excitation. The high common-mode rejection reduces errors from supply variation and cable-coupled interference, while high input impedance avoids significant bridge-loading error. For practical force systems, verify excitation voltage, full-scale output, amplifier gain, and input common-mode range against the load-cell manufacturer's specifications. Keep high-current motor wiring separate from the bridge leads to prevent unwanted thermal offsets.
推薦
推薦產品摘要
工程參考資料，適用於 INA101AM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | INA101AG | INA101SM | INA101KU | INA101P | INA101U |
|---|---|---|---|---|---|---|
| Package | TO-100-10 | 14-pin ceramic DIP | SOIC-16 | SOIC-16 | DIP-14 | SOIC-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
主要差異化特點
- Verified high common-mode rejection (對比INA101AG)
- High input impedance for low-level sensing (對比INA101SM)
- Low-noise instrumentation amplification (對比INA101KU)
設計說明
Route the two differential inputs as a closely matched pair and keep them away from switching nodes, relay contacts, and high-current return paths. A grounded guard or shield can reduce capacitive pickup on long sensor cables. Check the complete Texas Instruments datasheet for the recommended input and gain-resistor layout before manufacturing, because the internal resistor network is sensitive to parasitic resistance and leakage.
Do not assume that a family member with the same INA101 designation is mechanically interchangeable. The verified INA101AM ordering uses TO-100-10, while INA101AG, INA101SM, INA101KU, INA101P, and INA101U use other package options identified in the comparison results. Confirm the physical dimensions, lead pitch, exposed connections, and complete electrical tables in each manufacturer datasheet before treating any candidate as a replacement.
Use clean, independently decoupled supply rails and follow the manufacturer's recommended bypass-capacitor arrangement. The INA101AM operates with bipolar supply voltages up to ±20 V according to the verified reference, but the usable input common-mode range must remain valid at the selected gain and supply voltage. Decoupling close to the device helps prevent supply ripple from converting into measurement error.
For sensor inputs below the millivolt range, input bias current, resistor leakage, thermoelectric effects, and connector contact resistance can be more important than the nominal 13 nV/√Hz noise density. Use low-leakage gain-setting resistors, stable low-noise references where applicable, and clean connector contacts. Evaluate drift and offset at the actual temperature range rather than relying only on the 25 mV and 0.25 mV/°C maximum ratings.
合規資訊
The supplied verified web data contains technical specifications, manufacturer links, and distributor listings but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
