Renesas Electronics

ISL8392IB-T - 4-Channel SPST Analog Switch | Renesas

MPN: ISL8392IB-T ✓ 啟用中
+2 V to +12 V Vdss 2.5 nA Id 35 ohm Rds(on) 16-SOIC Package
MOQ: 1 |

ISL8392IB-T 概覽

The Renesas Electronics ISL8392IB-T is a CMOS quad analog switch with four independent single-pole single-throw channels in a 16-SOIC package. Each channel provides a 1:1 signal configuration, operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, and has a maximum specified on-resistance of 35 ohms. The device is optimized for low-power signal routing in battery-powered and space-constrained equipment.

An analog switch is an integrated semiconductor that routes electrical signals between circuit nodes under digital control. The ISL8392IB-T belongs to the analog switch, multiplexer and demultiplexer hierarchy, where it functions as four independent SPST switches. Compared with mechanical relays, it can switch faster, consume less power, and occupy less circuit-board area. Unlike a multiplexer that combines several inputs onto one output, its 1:1 configuration preserves a separate signal path for every channel.

Low power consumption is a principal feature of the ISL8392IB-T. The manufacturer specifies approximately 1 µW power consumption for battery-powered applications, with maximum leakage current of 2.5 nA. This low leakage helps preserve battery capacity when a switched node is inactive. The four switch channels also provide on-resistance flatness of up to 4 ohms, helping maintain consistent signal behavior across the operating range.

Fast switching makes the part suitable for time-sensitive signal paths. The specified turn-on time is 60 ns and turn-off time is 30 ns. These values are especially useful when the device selects between sensors, measurement channels, communication paths, or test points under digital control. Because analog switches conduct rather than regenerate signals, input bandwidth, on-resistance, capacitance, leakage, and off-state isolation remain important system-level considerations.

Typical uses include battery-powered instrumentation, portable measurement equipment, automated test systems, sample-and-hold front ends, sensor selection circuits, and communication routing. The device can operate from a single supply for low-voltage systems or from dual supplies when bipolar signals must be switched. Its 16-SOIC package supports conventional surface-mount assembly while providing four independently controlled switches in a modest board area.

A practical design should verify the signal amplitude against the selected supply configuration, place decoupling capacitance close to the supply pins, and keep high-speed routes short to minimize parasitic capacitance. Control inputs should be driven only with levels compatible with the operating supply. Check the datasheet pin-description and switching tables before assigning control states or routing a signal through an inactive channel.

直接替換替代品,適用於 ISL8392IB-T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ISL8392IB-T (相同外形與佔位) — 差異在於 Dual-Supply Operating Range, Package, Low Power Consumption, Switch Configuration.

Renesas Electronics
Dual-Supply Operating Range: +/-2 V to +/-6 V
Package: 16-pin SOIC
Low Power Consumption: 1 uW
比較對象 ISL8392IB-T →
Renesas Electronics
Low Power Consumption: 1 µW
Switch Configuration: 1:1 SPST
比較對象 ISL8392IB-T →

ISL8392IB

✅ 直接替換
Renesas Electronics
📦 16-SOIC
4 circuits · 1:1 SPST · 35 Ω · +2 V to +12 V · ±2 V to ±6 V · 1 µW · 2.5 nA · 60 ns

聯絡詢價

查看資料表 →

ISL8392IB-T 最大額定值與電氣特性

Number of Circuits 4 circuits
Switch Configuration 1:1
Switch Type Quad SPST
Maximum On-Resistance 35 ohm
On-Resistance Flatness 4 ohm maximum
Single-Supply Operating Range +2 V to +12 V
Dual-Supply Operating Range ±2 V to ±6 V
Power Consumption 1 µW
Maximum Leakage Current 2.5 nA
Turn-On Time 60 ns
Turn-Off Time 30 ns
Process Technology CMOS
封裝 16-SOIC
安裝類型 Surface mount

ISL8392IB-T 16-soic 腳位配置指南

ISL8392IB-T(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ISL8392IB-T 的 16-soic 封裝腳位圖

無詳細腳位定義資料: ISL8392IB-T.

請參閱 資料表 以查看完整腳位配置。

典型應用

ISL8392IB-T 適用於 6 應用s: Battery-Powered Portable Measurement, Automated Test and Measurement Routing, Sensor Input Selection, Sample-and-Hold Signal Routing, Communication Signal Routing, Low-Voltage Instrumentation Front End.

📱

Battery-Powered Portable Measurement

The ISL8392IB-T fits portable measurement equipment where four independent analog paths must be selected without placing a substantial load on the battery. Its approximately 1 µW power consumption and 2.5 nA maximum leakage are especially valuable when inactive channels remain connected to high-impedance sensors. The 60 ns turn-on time and 30 ns turn-off time permit rapid range or source selection, while the 35-ohm maximum on-resistance can serve many sensor-level signals when the downstream amplifier provides suitable input impedance and bandwidth.

🖥️

Automated Test and Measurement Routing

The four SPST channels of the ISL8392IB-T can route test signals among multiple sources, instrument inputs, or DUT nodes under digital control. Fast 60 ns turn-on and 30 ns turn-off transitions shorten the interval between routing commands, making the switch appropriate for repetitive measurement sequences. The 35-ohm maximum on-resistance must be included in the complete signal-path calculation, especially when driving low-impedance instrument front ends. The 16-SOIC package also allows four routing functions to be consolidated on a compact board.

🧩

Sensor Input Selection

The ISL8392IB-T can connect one of several sensor outputs to a shared conditioning channel through four independent SPST paths. Its low 2.5 nA maximum leakage helps reduce errors when the selected source has high source impedance, while approximately 1 µW power consumption suits compact sensing platforms. A design should confirm that the selected sensor amplitude remains within the operating limits of the chosen single- or dual-supply configuration. Output buffering may be required when the source impedance interacts significantly with the switch's 35-ohm maximum on-resistance.

🔧

Sample-and-Hold Signal Routing

For sampling systems, the ISL8392IB-T can route selected transducer or reference signals toward a sampling capacitor and subsequent converter. Its 30 ns turn-off time and 60 ns turn-on time permit short switching windows, while four independently controlled channels support multiple sources or acquisition paths. Care is required around capacitive loads because parasitic capacitance and charge injection can affect settling accuracy. Place the switch close to the sampling network and use a low-impedance acquisition stage where the 35-ohm on-resistance would otherwise create excessive attenuation.

🌐

Communication Signal Routing

The ISL8392IB-T can select among communication or peripheral signal paths when the signals operate within its low-voltage supply range. The fast switching transitions support controlled route changes, and the low 1 µW power figure can help preserve energy in portable systems. Nevertheless, an analog switch does not regenerate the signal, so insertion loss, bandwidth, off-isolation, and crosstalk determine suitability. Use short PCB traces, appropriate return paths, and source/load impedances that do not make the 35-ohm on-resistance the dominant link impedance.

🏭

Low-Voltage Instrumentation Front End

The ISL8392IB-T suits low-voltage instrumentation front ends where precision signal paths must be selected while power use remains constrained. Operation from a single +2 V to +12 V supply accommodates compact systems, while the dual ±2 V to ±6 V option supports bipolar signal routing. Four independent SPST channels provide local multiplexing without using a broader multiplexer topology. The design should account for signal-swing limits, control-logic levels, leakage into high-impedance nodes, and the attenuation introduced by the 35-ohm maximum on-resistance.

What is the Renesas ISL8392IB-T?
The Renesas ISL8392IB-T is a four-channel CMOS analog switch with independent 1:1 single-pole single-throw paths in a 16-SOIC package. According to the Renesas product page, it operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply. Its maximum on-resistance is 35 ohms, making it suitable for routing low- and moderate-frequency analog signals where fast, low-power operation is important.
What are the key specifications of ISL8392IB-T that engineers should know?
The ISL8392IB-T combines four SPST channels, 35-ohm maximum on-resistance, 60 ns turn-on time, and 30 ns turn-off time in a 16-SOIC package. The Renesas product page also specifies approximately 1 µW power consumption, 2.5 nA maximum leakage, and operation from +2 V to +12 V or ±2 V to ±6 V. These characteristics support low-power signal routing with fast control transitions.
What supply voltages can ISL8392IB-T use?
The ISL8392IB-T supports a single supply from +2 V to +12 V or a dual supply from ±2 V to ±6 V. According to the Renesas product description, this dual operating capability allows the switch to work with low-voltage unipolar systems or bipolar signal ranges. Control-logic levels and analog-signal limits must remain compatible with the selected supply configuration described in the manufacturer datasheet.
How fast is the ISL8392IB-T analog switch?
The ISL8392IB-T has a specified turn-on time of 60 ns and a turn-off time of 30 ns. These switching speeds, documented by Renesas for the ISL8391 through ISL8393 family, make the device suitable for selection networks, measurement routing, and automated test paths. Actual system response also depends on control-driver rise time, trace capacitance, load impedance, and the selected channel configuration.
How much power does ISL8392IB-T consume?
The ISL8392IB-T has approximately 1 µW power consumption, according to the Renesas product page. Its maximum leakage current is 2.5 nA, which is especially useful in battery-powered equipment where inactive switched nodes must not create an unnecessary load. Actual board consumption depends on supply voltage, control states, leakage paths, and the external circuit connected to each analog terminal.
What is the on-resistance of ISL8392IB-T?
The ISL8392IB-T has a maximum on-resistance of 35 ohms and maximum on-resistance flatness of 4 ohms. The 35-ohm value identifies the resistance of a closed channel, while flatness describes how much that resistance changes across the operating conditions covered by the manufacturer specifications. These figures should be considered when sizing buffers and estimating signal attenuation.
Where can I download the ISL8392IB-T datasheet PDF?
The ISL8392IB-T datasheet can be accessed through the Renesas ISL8392 product page or through the indexed Intersil datasheet listing. The manufacturer page identifies the device as a low-voltage, single- and dual-supply quad SPST analog switch. Use the pin-description table, truth table, recommended operating conditions, and electrical characteristics from the manufacturer datasheet when finalizing a PCB design.
Where can I find the ISL8392IB-T pinout?
The ISL8392IB-T pinout is shown in the manufacturer datasheet and corresponds to the 16-SOIC package. The indexed component listings identify the device as a 16-SOIC quad analog switch. Assign the four control inputs and eight analog terminals by following the pin-description and truth tables, because some SPST implementations use paired throw terminals rather than a single common terminal.
Is ISL8392IB-T suitable for battery-powered equipment?
Yes, the ISL8392IB-T is specifically suited to battery-powered equipment because its specified power consumption is approximately 1 µW and maximum leakage current is 2.5 nA. These values reduce the impact of the switch on battery-operated instruments, portable sensors, and handheld test equipment. Designers should still evaluate leakage from surrounding components and avoid exceeding the analog signal limits for the selected supply range.
What is the difference between ISL8392IB-T and ISL8392IB?
The published listings identify both ISL8392IB-T and ISL8392IB as the 16-SOIC, four-circuit, 1:1, 35-ohm quad analog switch, and the -T designation distinguishes the ordered target variant. The available technical descriptions do not characterize a different electrical configuration. For a production substitution, verify the manufacturer ordering information, pin definitions, control logic, and shipping format against the exact approved part number.
When should I choose ISL8392IB-T over a multiplexer IC?
Choose ISL8392IB-T when the design needs four separate 1:1 paths that can be routed independently, especially when low leakage and approximately 1 µW power consumption are priorities. A multiplexer is more appropriate when many inputs must share one output or when selecting a larger channel count in a consolidated package. The ISL8392IB-T provides simpler routing when maintaining independent signal paths is the primary requirement.
Can ISL8392IB-T replace another 16-SOIC quad analog switch?
A device can replace the ISL8392IB-T only after its exact package, pinout, control polarity, supply range, on-resistance, leakage, bandwidth, and off-isolation have been confirmed as equivalent. No pin-compatible substitute was established by the available cross-reference results, so a like-for-like replacement should not be assumed. Use the manufacturer cross-reference process and compare the replacement datasheet before approving a second-source component.
What is the best Renesas equivalent for ISL8392IB-T?
The closest named family members are the ISL8391 and ISL8393 in the Renesas ISL8391-ISL8393 family, but the available description does not establish that either is a pin-to-pin replacement for the ISL8392. The ISL8392 specifically represents the quad 1:1 SPST configuration in the family. Confirm the exact ordering variant, pinout, electrical characteristics, and supply requirements before considering another family member.
Where can I buy ISL8392IB-T online?
The ISL8392IB-T can be requested through the Request a Quote form on this page. The manufacturer product page and distributor listings identify the exact Renesas ISL8392IB-T as a 16-SOIC quad SPST analog switch. The quote form is the appropriate route for current commercial terms, stock confirmation, lead time, and minimum-order requirements.
What is the price of ISL8392IB-T?
Use the Request a Quote form on this page for the current ISL8392IB-T commercial terms. The available product listings identify the exact MPN and package, but they do not print a qualifying quantity-break price table that can be reproduced reliably. The form allows the requested quantity, delivery requirements, and packaging expectations to be included with the quote request.
What is the lead time and stock status for ISL8392IB-T?
Request the current ISL8392IB-T stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The manufacturer lists the ISL8392 family for low-voltage, single- and dual-supply operation, while the distributor listing identifies ISL8392IB-T in a 16-SOIC package. Supply status can vary by order quantity and fulfillment schedule, so confirm it when placing the order.

工程參考資料,適用於 ISL8392IB-T — 比較、設計指引及合規資訊。

選型指南

Choose the ISL8392IB-T when a design requires four independent 1:1 SPST paths, low leakage, fast switching, and operation from either a low-voltage single supply or a bipolar dual supply. It is especially suitable for battery-powered instruments, sensor-selection networks, automated test routing, and measurement systems in which approximately 1 µW power consumption and 2.5 nA maximum leakage are important. Check the 35-ohm maximum on-resistance against the source and load impedances; use buffering when attenuation would compromise signal accuracy. Before choosing another part, verify exact pin compatibility, control polarity, supply limits, bandwidth, off-isolation, leakage, and electrical conditions. The ISL8391 and ISL8393 share the broader Renesas family name, but the available family description does not establish either as a direct replacement for the ISL8392 configuration. For production sourcing, use the Request a Quote form to confirm the exact suffix, lifecycle availability, packaging, order quantity, and delivery schedule.

與替代品比較

參數 本產品
Brand Renesas Electronics
Package 16-SOIC
Number of Circuits 4 circuits
Switch Configuration 1:1
Switch Type Quad SPST
Maximum On-Resistance 35 ohm
Single-Supply Operating Range +2 V to +12 V
Dual-Supply Operating Range ±2 V to ±6 V
Power Consumption 1 µW
Maximum Leakage Current 2.5 nA
Turn-On Time 60 ns
Turn-Off Time 30 ns

主要差異化特點

  • Combines four independently controlled analog paths in one device (對比Discrete SPST switch implementations)
  • Low power is suitable for portable and battery-operated systems (對比Conventional higher-leakage analog switches)
  • Fast switching supports time-sensitive routing (對比Mechanically operated relays)
  • Supports both unipolar and bipolar operating arrangements (對比Single-supply-only analog switches)

設計說明

Treat the 35-ohm maximum on-resistance as part of the complete signal-path impedance. With a switch resistance of 35 ohms and a 50-ohm source impedance, the closed-channel attenuation is approximately -3.9 dB before considering capacitance or bandwidth. Use a higher source impedance or a suitable buffer when full-amplitude transfer is required, and evaluate the total RON flatness of up to 4 ohms across the intended operating conditions.

Place the device close to the signals being routed and connect its supply pins to short, low-impedance decoupling paths. Keep analog terminals away from fast control and clock traces to reduce capacitive coupling. Provide a continuous ground reference beneath the SOIC footprint and avoid routing high-current or high-voltage paths adjacent to sensitive analog terminals. These layout practices help preserve the intended switching behavior and reduce off-state feedthrough.

Select the supply configuration according to both the control-logic levels and the analog signal range. A single +2 V to +12 V supply simplifies low-voltage systems, while ±2 V to ±6 V permits bipolar routing. Ensure every driven control input remains within its valid logic level and that signal excursions do not exceed the operating limits in the manufacturer datasheet. Decouple the supply locally and verify startup states before enabling sensitive downstream equipment.

Do not assume that the fast 60 ns turn-on and 30 ns turn-off specifications guarantee complete settling at every load. Capacitive probe capacitance, long PCB traces, slow control edges, and high source impedances can extend practical settling time. Likewise, approximately 1 µW power consumption is a device-level figure rather than a guarantee of total system consumption. Re-evaluate leakage through the switch, pull resistors, external drivers, and connected circuitry in battery-operated designs.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page and component listings do not explicitly state the requested RoHS, REACH, lead-free, halogen-free, or conflict-minerals statuses. AEC-Q100 qualification is not indicated for this general-purpose interface switch.

相關搜尋

ISL8392IB-T datasheet ISL8392IB-T pinout ISL8392IB-T datasheet pdf ISL8392IB-T specifications ISL8392IB-T equivalent ISL8392IB-T replacement ISL8392IB-T cross reference Renesas ISL8392IB-T ISL8392IB-T price ISL8392IB-T stock ISL8392IB-T 16-SOIC ISL8392IB-T analog switch ISL8392IB-T low voltage ISL8392IB-T battery powered

相關元件與詞彙

Renesas Electronics ISL8392IB-T ISL8392IB ISL8391 ISL8393 CMOS analog switch SPST switch single-pole single-throw switch multiplexer demultiplexer interface IC semiconductor 16-SOIC SOIC package surface-mount package on-resistance on-resistance flatness leakage current turn-on time turn-off time single supply dual supply battery-powered equipment sensor selection automated test equipment
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情