Renesas Electronics

ISL84544CP - 30Ω Dual SPDT Analog Switch | Renesas

MPN: ISL84544CP ✓ 啟用中
+2.7 V to +12 V Vdss 10 nA maximum at 85 °C Id 30 Ω maximum Rds(on) 8-pin PDIP Package
MOQ: 1 |

ISL84544CP 概覽

The Renesas Electronics ISL84544CP is a low-voltage, single-supply dual SPDT analog switch with a maximum on-resistance of 30 Ω, on-resistance matching below 1 Ω, and maximum charge injection of 5 pC. The device operates from a single +2.7 V to +12 V supply and is packaged in an 8-pin PDIP. It is designed for low-voltage signal routing where low power consumption, fast switching, and low leakage are important.

An analog switch is an analog interface IC that connects or disconnects circuit nodes under digital control. The ISL84544CP belongs to the SPDT analog-switch family, within analog switches, interface ICs, and broader semiconductor signal-routing systems. Its SPDT configuration provides a common terminal that can select either of two switched terminals, allowing one source signal to be routed to one of two destinations.

Key features include a maximum on-resistance of 30 Ω, less than 1 Ω matching between channels, and charge injection of no more than 5 pC. The device specifies turn-on and turn-off times of 35 ns and 25 ns, respectively. Its low power consumption is below 5 µW, while maximum leakage current at 85 °C is 10 nA, making it suitable for battery-powered and portable equipment.

The ISL84544CP is manufactured for operation from a +2.7 V to +12 V supply and includes break-before-make switching behavior. Guaranteed minimum 2000 V ESD protection helps the interface withstand electrostatic discharge during handling. The family is also identified as a drop-in replacement for MAX4544 devices and is pin compatible with MAX323, subject to verifying the electrical limits of the specific replacement.

Typical uses include battery-powered instruments, audio and video signal routing, communication equipment, test and measurement systems, and heads-up-display interfaces. Because the on-resistance introduces insertion loss and the control signals interface with lower-voltage logic, the supply voltage, logic levels, signal range, and required bandwidth should be checked together before implementation.

For robust layouts, route each switched trace away from high-impedance amplifier inputs and keep the common node connections short. Place bypass capacitance close to the supply pin, use a defined logic return, and account for charge injection when the switched signal changes state. The 8-pin PDIP format favors through-hole prototype and industrial assembly rather than compact surface-mount designs.

This product page combines the manufacturer's functional and switching specifications with package guidance, application analysis, verified drop-in relationship information, and a parameter-level comparison. These practical details help engineers evaluate signal-integrity, routing, and supply compatibility before modifying an existing design.

直接替換替代品,適用於 ISL84544CP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MAX4544CPA+

✅ 直接替換
📦 8-pin PDIP
Drop-in MAX4544 replacement with the same 8-pin DIP implementation and +2.7 V to +12 V SPDT function; the documented electrical distinction is 0 ohm in supply-voltage range and 0 additional switches.

📋 參考替代品(不在目錄中)

ISL84544CP 最大額定值與電氣特性

Device Type Dual SPDT precision analog switch
Supply Voltage Range +2.7 V to +12 V
On-Resistance 30 Ω maximum
On-Resistance Matching Between Channels <1 Ω
Charge Injection 5 pC maximum
Leakage Current 10 nA maximum at 85 °C
Power Consumption <5 µW
Turn-On Time 35 ns
Turn-Off Time 25 ns
Switching Action Break-before-make guaranteed
ESD Protection 2000 V minimum
Number of Switches 2
Switch Configuration SPDT
腳位數 8 pins
封裝 8-pin PDIP
安裝類型 Through-hole
Temperature Grade Commercial

ISL84544CP 8-pin pdip 腳位配置指南

ISL84544CP(8-pin pdip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ISL84544CP 的 8-pin pdip 封裝腳位圖

無詳細腳位定義資料: ISL84544CP.

請參閱 資料表 以查看完整腳位配置。

典型應用

ISL84544CP 適用於 6 應用s: Battery-Powered Test Equipment, Audio Signal Routing, Video Signal Multiplexing, Communication Equipment, Heads-Up Display Interface, Precision Measurement Front Ends.

🧪

Battery-Powered Test Equipment

The ISL84544CP fits battery-powered test equipment because its +2.7 V to +12 V single-supply operation accommodates portable measurement systems and the family specifies power consumption below 5 µW. The dual SPDT arrangement can route a sensor, reference, or calibration signal between two instrument channels. Its 30 Ω maximum on-resistance should be included in the input-impedance and signal-attenuation budget. The 5 pC maximum charge injection is also useful when switching high-impedance detector nodes, while 10 nA maximum leakage at 85 °C helps preserve measurement accuracy. A tube or through-hole assembly arrangement is appropriate for prototypes and rugged laboratory instruments where field replacement is more important than minimum board area.

🎧

Audio Signal Routing

The ISL84544CP can route low-level audio signals between two paths because each switch section provides an SPDT configuration with 35 ns turn-on and 25 ns turn-off timing. The 30 Ω maximum on-resistance should be compared with the input impedance of the receiving audio stage to determine acceptable attenuation. For high-impedance microphone or instrumentation inputs, charge injection of no more than 5 pC limits control-induced transients, although cable capacitance remains part of the total settling behavior. Its single +2.7 V to +12 V supply simplifies portable audio designs, and the less than 5 µW power specification helps limit battery drain. The 8-pin PDIP package makes it straightforward to prototype and service audio switching boards.

📺

Video Signal Multiplexing

The ISL84544CP is useful for low-bandwidth video-source multiplexing where each SPDT section selects between two paths. The specified 30 Ω maximum on-resistance and less than 1 Ω matching between channels help maintain channel consistency, while 25 ns turn-off and 35 ns turn-on times support rapid selection. Signal amplitude and bandwidth must remain within the manufacturer's limits because the 30 Ω resistance can cause attenuation, particularly when driving high-impedance nodes. The guaranteed break-before-make behavior prevents the two switched outputs from being connected momentarily during a transition. Its 8-pin PDIP outline is useful for laboratory video demonstrators and industrial control panels where serviceability and robust through-hole connections outweigh surface-mount density.

🌐

Communication Equipment

The ISL84544CP can select transmit, receive, test, or bypass paths in low-voltage communication equipment. Its +2.7 V to +12 V operating range supports portable radios, interface modules, and embedded diagnostic equipment, while the dual SPDT structure reduces the number of discrete routing components needed on an 8-pin board. The 10 nA maximum leakage at 85 °C is advantageous when switching high-impedance RF-detector or sensor nodes, although it is not a substitute for an RF-qualified switch at high frequencies. Use the manufacturer data for absolute signal limits, and evaluate insertion loss carefully at the intended frequency. The commercial-grade PDIP package is practical for industrial communication prototypes and serviceable control equipment.

📱

Heads-Up Display Interface

The ISL84544CP is appropriate for switching signals in heads-up-display and compact optical interface assemblies where low supply voltage and limited standby consumption are important. Its less than 5 µW power consumption and +2.7 V minimum supply support portable display electronics, while the dual SPDT arrangement can connect a display drive path or diagnostic signal to one of two destinations. Break-before-make operation provides defined transition behavior, and the 5 pC maximum charge injection reduces disturbance on sensitive nodes. Because the PDIP package is larger than modern surface-mount options, it is best suited to prototypes and equipment where through-hole reliability and easy replacement are valuable. Confirm the logic levels and analog signal range before integrating it with a display controller.

📊

Precision Measurement Front Ends

The ISL84544CP can select calibration, reference, or sensor paths in precision measurement front ends. Matching below 1 Ω between channels helps reduce channel-dependent error, while the 30 Ω maximum on-resistance must be included in the source-load calculation for the selected amplifier input. The maximum 5 pC charge injection is particularly relevant when the switch feeds a high-impedance amplifier, because the resulting voltage step also depends on node capacitance and control timing. Low leakage of no more than 10 nA at 85 °C supports bias-current-sensitive circuitry. Use short, shielded routing for the common and switched nodes, maintain a stable ground reference, and verify settling behavior with the actual source impedance and cable capacitance.

推薦產品摘要

ISL84544CP Renesas Electronics 用於: Battery-Powered Test Equipment, Audio Signal Routing, Video Signal Multiplexing, Communication Equipment, Heads-Up Display Interface, Precision Measurement Front Ends MAX4544CPA+ Documented 8-pin DIP drop-in alternative 用於: Battery-Powered Test Equipment, Audio Signal Routing, Video Signal Multiplexing, Communication Equipment, Heads-Up Display Interface, Precision Measurement Front Ends
What is the operating voltage of ISL84544CP?
The ISL84544CP operates from a single +2.7 V to +12 V supply. According to the Renesas product page for the ISL84544 family, this low-voltage range supports battery-powered equipment and portable systems. The control-signal thresholds, analog signal range, and absolute maximum ratings must remain within the limits specified in the manufacturer datasheet for the selected ISL84544 variant.
What is the on-resistance of ISL84544CP?
The ISL84544CP has a maximum on-resistance of 30 Ω. According to the Renesas product page, on-resistance matching between the two channels is below 1 Ω. The 30 Ω specification applies to the characterized operating conditions stated by the manufacturer; application calculations should include signal attenuation, insertion loss, and the actual bias and supply conditions used in the finished circuit.
Is ISL84544CP a dual SPDT analog switch?
Yes, the ISL84544CP is a dual SPDT analog switch with two independently controlled switching sections. The Renesas family description identifies the devices as precision, low-voltage, single-supply analog switches. Each section uses a common node and two switched paths, making the device suitable for source selection, signal routing, test-point isolation, and similar analog multiplexing tasks.
Where can I download the ISL84544CP datasheet PDF?
The official ISL84544 family information and documentation are available from the Renesas product page at https://www.renesas.com/en/products/isl84544. Use the manufacturer datasheet to confirm the complete ordering information, pin descriptions, electrical characteristics, absolute maximum ratings, and recommended operating conditions for the CP package suffix before releasing the PCB design.
Where can I find the ISL84544CP pinout?
The ISL84544CP uses an 8-pin PDIP package, and the authoritative pin assignment is shown in the Renesas ISL84544 family datasheet. The public product listing identifies the package as 8-pin PDIP but does not reproduce every terminal name, so use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB nets. The package diagram key for this product is the 8-pin DIP layout.
What is the best drop-in replacement for ISL84544CP?
The MAX4544CPA+ is the clearest documented drop-in choice because the Renesas product page identifies the ISL84544 family as a drop-in replacement for MAX4544, and the comparison listing identifies MAX4544CPA+ as an 8-pin DIP precision SPDT switch. Verify supply voltage, on-resistance, logic levels, leakage, and timing against the original device before production use, especially outside 3.3 V and 5 V operation.
Can MAX4544CPA+ replace ISL84544CP?
Yes, MAX4544CPA+ can serve as a drop-in replacement when the existing PCB uses the compatible 8-pin DIP implementation and the operating conditions match. The Renesas product page specifically describes the ISL84544 family as a drop-in replacement for MAX4544. The reciprocal substitution should still be validated against control thresholds, analog signal limits, on-resistance, switching time, and ESD requirements.
What are the key specifications of ISL84544CP that engineers should know?
The principal ISL84544CP specifications are a +2.7 V to +12 V supply, 30 Ω maximum on-resistance, less than 1 Ω channel matching, 5 pC maximum charge injection, 35 ns turn-on time, 25 ns turn-off time, and less than 5 µW power consumption. The Renesas product page also specifies 10 nA maximum leakage at 85 °C, guaranteed break-before-make operation, and minimum 2000 V ESD protection.
Is ISL84544CP suitable for battery-powered equipment?
Yes, the ISL84544CP is suitable for battery-powered and portable equipment. The Renesas family is designed for single-supply operation from +2.7 V to +12 V, with power consumption below 5 µW and leakage current up to 10 nA at 85 °C. These characteristics reduce the load presented by the switch, although the complete system budget must also include control logic and signal-source consumption.
How does ISL84544CP compare with MAX4544CPA+ for signal routing?
ISL84544CP and MAX4544CPA+ are both precision, single-SPDT analog switches associated with the same 8-pin DIP replacement relationship. The ISL84544 family is specified for a 30 Ω maximum on-resistance, less than 1 Ω channel matching, 5 pC maximum charge injection, and 35 ns turn-on time. The exact MAX4544 operating values should be checked against the required supply, signal bandwidth, and leakage limits.
When should I choose ISL84544CP over another analog switch?
Choose ISL84544CP when a dual SPDT, +2.7 V to +12 V analog switch is needed in an 8-pin PDIP design and low power consumption is important. The device is particularly appropriate for battery-powered instruments, audio and video routing, communications equipment, and test systems. Choose a surface-mount switch instead when PCB area, automated assembly, or higher pin density is the primary requirement.
Is ISL84544CP suitable for audio and video switching?
Yes, the ISL84544CP is suitable for audio and video routing when the signal amplitude, bandwidth, and distortion requirements remain within the device's operating limits. Its 35 ns turn-on and 25 ns turn-off times support fast routing, while 5 pC maximum charge injection limits control-signal disturbance. The 30 Ω on-resistance should be included in the signal-loss budget.
What is the charge injection of ISL84544CP?
The ISL84544CP has a maximum charge injection of 5 pC. According to the Renesas product page, this low value limits the transient voltage step introduced into a high-impedance analog node when the switch changes state. The actual error also depends on total node capacitance, source impedance, switch-control timing, and circuit topology, so include those effects in precision measurement or signal-conditioning designs.
Where to buy ISL84544CP online?
Use the Request a Quote form on this ISL84544CP page to request current availability, commercial terms, and shipment scheduling for the exact 8-pin PDIP ordering code. The manufacturer part number is ISL84544CP, and the CP suffix identifies the package and ordering configuration shown in the Renesas documentation. Confirm lot traceability, date code, and quantity requirements when placing the order.
What is the price and lead time of ISL84544CP?
Current commercial pricing and lead time for ISL84544CP should be requested through the Request a Quote form on this page. The form allows quantity, target price, and delivery requirements to be stated for the exact 8-pin PDIP part. No fixed price or stock promise is appropriate because pricing and lead time can change with order quantity, inventory, and supply-chain conditions.

工程參考資料,適用於 ISL84544CP — 比較、設計指引及合規資訊。

選型指南

Choose ISL84544CP for a low-voltage dual SPDT routing function in an 8-pin PDIP design, particularly when the system uses a +2.7 V to +12 V supply and battery-powered operation. Its less than 5 µW power consumption, 10 nA maximum leakage at 85 °C, 35 ns turn-on time, and 5 pC maximum charge injection make it useful for portable instruments, precision front ends, communication equipment, and audio or video routing. MAX4544CPA+ is the relevant alternative when a documented MAX4544-compatible implementation is desired, but its individual on-resistance, timing, leakage, and control specifications should be checked against the operating requirements. Other ISL84544 suffixes may use different packages or switch configurations and should not be selected solely by family name. A compact surface-mount analog switch is preferable when board area and automated assembly outweigh the serviceability of the PDIP package.

與替代品比較

參數 本產品 MAX4544CPA+
Brand Renesas Electronics Maxim Integrated
Package 8-pin PDIP 8-pin PDIP - same package
Device Type Dual SPDT precision analog switch Precision single SPDT analog switch
Supply Voltage Range +2.7 V to +12 V +2.7 V to +12 V
Drop-In Relationship Renesas documents ISL84544 as a drop-in replacement for MAX4544 Original-device counterpart for the documented replacement

主要差異化特點

  • Documented MAX4544 drop-in relationship (對比MAX4544CPA+)
  • Low switching resistance in a low-power design (對比MAX4544CPA+)
  • Fast, defined analog switching (對比MAX4544CPA+)
  • Low channel variation for precision routing (對比MAX4544CPA+)

設計說明

Include the 30 Ω maximum on-resistance when calculating insertion loss and source loading. For a high-impedance receiver, use the complete switch, routing, and receiver network rather than treating the switch as ideal. Place each switch close to the signal origin or destination, keep common-node traces short, and avoid sharing sensitive paths with clock or switching-node return currents.

Do not assume every package variant in the ISL84544 family is interchangeable. The ISL84544CP is an 8-pin PDIP ordering code, while other suffixes can use different package styles or device configurations. Confirm the family member, package, pin assignment, control logic, and absolute maximum ratings in the manufacturer datasheet before substituting another suffix or a competitor part.

Route the analog common and switched nodes as short, continuous traces, with a solid ground plane and minimal loop area. Keep the switch and any local bypass capacitor close to their associated connector or front-end circuitry. For high-impedance signals, use guarded or shielded routing and avoid nearby digital switching traces. Verify the control signal levels and ground reference so the switch is never driven outside its specified input range.

The family specifies less than 5 µW power consumption and a +2.7 V to +12 V single supply, but the overall supply must still provide adequate transient current for the control inputs and attached circuitry. Add the required local decoupling directly between the supply and ground pins, maintain a low-impedance return path, and check startup behavior when the analog signal may be present before the control logic becomes valid.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The component is identified as commercial grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited manufacturer and distributor information.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

ISL84544CP datasheet ISL84544CP datasheet pdf ISL84544CP pinout ISL84544CP specifications Renesas ISL84544CP ISL84544CP 8-pin PDIP ISL84544CP analog switch ISL84544CP 30 ohm ISL84544CP equivalent ISL84544CP replacement ISL84544CP vs MAX4544CPA+ ISL84544CP price ISL84544CP stock ISL84544CP application circuit ISL84544CP footprint

相關元件與詞彙

Renesas Electronics Intersil ISL84544CP ISL84544 MAX4544CPA+ dual SPDT analog switch analog switch SPDT interface IC semiconductor single-supply operation on-resistance charge injection break-before-make power consumption leakage current ESD protection 8-pin PDIP DIP package through-hole package battery-powered equipment audio signal routing video multiplexing precision measurement MAX323
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情