LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor
MPN: LC4064C-75T44I ✗ 停產LC4064C-75T44I 概覽
A CPLD, or complex programmable logic device, is a programmable semiconductor that combines multiple logic functions into one reconfigurable integrated circuit. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and a practical implementation of hardware description language designs. Its interconnect and macrocell architecture can implement combinational and sequential logic, allowing one package to replace networks of discrete gates, counters, decoders, and state machines.
The LC4064C provides 64 macrocells and supports operation at frequencies up to 168 MHz. Its ispMACH architecture is designed for SuperFAST programmable logic applications, while in-system programming supports configuration within the target system rather than requiring a separate dedicated programming step. The device supports 3.3 V, 2.5 V, and 1.8 V operating arrangements identified in the family documentation, allowing implementation across multiple logic voltage levels.
The 44-pin TQFP package provides a compact surface-mount footprint with leads on all four sides. This package arrangement is suitable for industrial and commercial PCB layouts where the design needs more general-purpose I/O than a very small programmable-logic package while retaining manageable board density. The -75 suffix identifies the device speed grade, and the I suffix identifies the industrial temperature option.
Typical applications include bus-interface bridging, control-plane logic, industrial automation, data-acquisition control, legacy peripheral emulation, and general glue-logic consolidation. The 64-macrocell capacity is particularly useful when a design combines several address decoders, registers, counters, state machines, and interface control blocks that benefit from a single configurable implementation.
Designers should confirm the exact pin assignment, supported I/O standards, configuration scheme, and power architecture against the manufacturer datasheet before layout release. PCB planning must preserve the package pin numbering and provide suitable power and ground distribution, while system timing should use the -75 speed grade as the device operating target.
This page combines the LC4064C-75T44I device identity, package and timing information with focused alternatives, engineering guidance, and comparison criteria. It helps engineers identify genuine same-footprint replacements while separating exact functional choices from changes that require schematic, pinout, timing, or qualification review.
直接替換替代品,適用於 LC4064C-75T44I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064C-75T44I (相同外形與佔位) — 差異在於 Architecture, Device Type, Product Family, Speed Grade, Package.
LC4064C-75TN44I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064C-75T44C
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75T44I
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75TN44I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-75T44I
✅ 直接替換聯絡詢價
查看資料表 →LC4064C-75T44I 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C |
| Architecture | ispMACH 4000 SuperFAST architecture |
| Macrocell Count | 64 macrocells |
| Maximum Frequency | 168 MHz |
| Speed Grade | -75 |
| Core Supply Voltage | 1.8 V |
| Supported Supply Arrangements | 3.3 V, 2.5 V, and 1.8 V |
| Programming | In-system programmable |
| 封裝 | 44-pin TQFP |
| 腳位數 | 44 pins |
| 安裝類型 | Surface mount |
| Shipping Format | Tray |
| Operating Temperature Grade | Industrial grade |
LC4064C-75T44I 44-pin tqfp 腳位配置指南
LC4064C-75T44I(44-pin tqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064C-75T44I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064C-75T44I 適用於 6 應用s: Industrial Automation Control, Data-Acquisition Control, Bus Interface Bridging, Legacy Peripheral Emulation, Security and Access Control, LED and Display Control.
Industrial Automation Control
The LC4064C-75T44I fits industrial automation control logic when a machine controller needs programmable state machines, counters, and interface sequencing in a compact device. Its 64 macrocells provide a defined logic-building capacity, while the 168 MHz maximum operating frequency supports timing-critical control paths. The industrial-grade suffix and 44-pin TQFP package suit robust surface-mount control boards. Engineers should allocate pins early for machine I/O, isolate noisy actuator signals, and verify the complete operating-temperature and timing requirements against the manufacturer documentation before production release.
推薦
Data-Acquisition Control
The LC4064C-75T44I can consolidate data-acquisition sequencing, sampling triggers, buffer controls, and status decoding into one programmable-logic device. The 64-macrocell architecture is suitable for deterministic control blocks that coordinate sensors, counters, and digital interfaces, while the 168 MHz maximum frequency provides margin for timing-critical acquisition logic. Place the device away from switching-regulator and high-current sensor paths, keep clock routing short, and validate each acquisition-control path against the -75 speed grade and the device's verified I/O capabilities.
推薦
Bus Interface Bridging
The LC4064C-75T44I is appropriate for compact bus-interface bridging and protocol translation where combinational decoding, address qualification, and registered control logic must operate predictably. Its 64 macrocells and 168 MHz maximum frequency allow multiple related finite-state functions to share one package. The 44-pin TQFP footprint simplifies board assembly compared with larger leaded packages. Signal-integrity review remains essential: assign unused pins according to the datasheet, confirm supported I/O standards, and avoid routing high-speed bus transitions next to sensitive clock or reset nets.
推薦
Legacy Peripheral Emulation
The LC4064C-75T44I can implement programmable replacements for fixed-function glue logic used around legacy peripherals, including address decoding, command sequencing, interrupt qualification, and status-register emulation. The 64-macrocell capacity permits several related logic functions to be consolidated, and the -75 speed grade targets a 168 MHz maximum operating frequency. Confirm pin-level signal direction and voltage compatibility before substituting the original device. A bench validation should cover normal operation, reset, write cycles, read cycles, and every illegal or partially selected interface state.
推薦
Security and Access Control
The LC4064C-75T44I can implement deterministic access-control sequences, lock mechanisms, command filters, and tamper-alarm logic when the required functions fit within 64 macrocells. Its in-system-programmable architecture allows the logic configuration to be updated as system requirements evolve, and the 168 MHz maximum frequency supports precisely timed authentication or sequencing blocks. Security implementations should still separate sensitive configuration storage from routine logic, add external authorization where required, and validate reset, fault, and power-loss behavior rather than relying on programmable logic alone for a complete security boundary.
推薦
LED and Display Control
The LC4064C-75T44I is suitable for display and LED-control subsystems that require multiplexed timing, segment decoding, animation counters, and programmable refresh sequences. Its 64 macrocells allow several display functions to share a single device, while the 168 MHz maximum frequency supports clocked timing functions with timing margin. Use the manufacturer I/O guidance to confirm drive capability before connecting displays directly, buffer high-current LED outputs externally, and keep display return-current paths away from sensitive timing and configuration nets.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064C-75T44I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064C-75TN44I | LC4064C-75T44C | LC4064V-75T44I | LC4064V-75TN44I | LC4064B-75T44I |
|---|---|---|---|---|---|---|
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000V | ispMACH 4000V | ispMACH 4000B |
| Speed Grade | -75 | -75 | -75 | -75 | -75 | -75 |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
主要差異化特點
- Target ordering option preserves the industrial temperature designation (對比LC4064C-75T44C)
- Direct LC4064C family continuity for design migration (對比LC4064V-75T44I)
- Nominal speed-grade match reduces timing-class migration risk (對比LC4064B-75T44I)
設計說明
Use the manufacturer TQFP-44 land pattern and pin-description table as the controlling PCB references. Preserve the pin-1 orientation, verify the exposed-pad treatment if required by the package drawing, and keep configuration pins clear of unintended traces. Place decoupling capacitors close to the supply and ground pins shown in the datasheet rather than distributing them uniformly around the package.
Route clocks, reset, and high-fanout programmable signals away from switching nodes and noisy I/O returns. Use a continuous ground reference beneath the device where the package and board stackup permit, avoid stubs on configuration paths, and apply the I/O timing constraints for the -75 grade and 168 MHz maximum operating condition. Validate timing with the actual compiled design rather than relying only on the device headline frequency.
Do not substitute an LC4064B, LC4064V, or LC4064C variant based only on the 44-pin package and -75 suffix. Check the complete pin-description table, I/O voltage arrangements, configuration interface, power pins, macrocell capacity, temperature grade, and timing specifications. The commercial C suffix is particularly unsuitable when the original I suffix was selected for an industrial temperature environment.
合規資訊
The part is a programmable logic device, so AEC-Q100 qualification is not applicable as an automotive qualification claim. Compliance attributes require confirmation from the manufacturer material declaration or product documentation.