LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor
부품 번호: LC4064C-75T44I ✗ 단종LC4064C-75T44I 개요
A CPLD, or complex programmable logic device, is a programmable semiconductor that combines multiple logic functions into one reconfigurable integrated circuit. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and a practical implementation of hardware description language designs. Its interconnect and macrocell architecture can implement combinational and sequential logic, allowing one package to replace networks of discrete gates, counters, decoders, and state machines.
The LC4064C provides 64 macrocells and supports operation at frequencies up to 168 MHz. Its ispMACH architecture is designed for SuperFAST programmable logic applications, while in-system programming supports configuration within the target system rather than requiring a separate dedicated programming step. The device supports 3.3 V, 2.5 V, and 1.8 V operating arrangements identified in the family documentation, allowing implementation across multiple logic voltage levels.
The 44-pin TQFP package provides a compact surface-mount footprint with leads on all four sides. This package arrangement is suitable for industrial and commercial PCB layouts where the design needs more general-purpose I/O than a very small programmable-logic package while retaining manageable board density. The -75 suffix identifies the device speed grade, and the I suffix identifies the industrial temperature option.
Typical applications include bus-interface bridging, control-plane logic, industrial automation, data-acquisition control, legacy peripheral emulation, and general glue-logic consolidation. The 64-macrocell capacity is particularly useful when a design combines several address decoders, registers, counters, state machines, and interface control blocks that benefit from a single configurable implementation.
Designers should confirm the exact pin assignment, supported I/O standards, configuration scheme, and power architecture against the manufacturer datasheet before layout release. PCB planning must preserve the package pin numbering and provide suitable power and ground distribution, while system timing should use the -75 speed grade as the device operating target.
This page combines the LC4064C-75T44I device identity, package and timing information with focused alternatives, engineering guidance, and comparison criteria. It helps engineers identify genuine same-footprint replacements while separating exact functional choices from changes that require schematic, pinout, timing, or qualification review.
드롭인 대체품: LC4064C-75T44I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4064C-75T44I (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Device Type, Product Family, Speed Grade, Package.
LC4064C-75TN44I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064C-75T44C
✅ 드롭인가격 문의
데이터시트 보기 →LC4064V-75T44I
✅ 드롭인가격 문의
데이터시트 보기 →LC4064V-75TN44I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064B-75T44I
✅ 드롭인가격 문의
데이터시트 보기 →LC4064C-75T44I 최대 정격 & 전기적 특성
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C |
| Architecture | ispMACH 4000 SuperFAST architecture |
| Macrocell Count | 64 macrocells |
| Maximum Frequency | 168 MHz |
| Speed Grade | -75 |
| Core Supply Voltage | 1.8 V |
| Supported Supply Arrangements | 3.3 V, 2.5 V, and 1.8 V |
| Programming | In-system programmable |
| 패키지 | 44-pin TQFP |
| 핀 수 | 44 pins |
| 실장 유형 | Surface mount |
| Shipping Format | Tray |
| Operating Temperature Grade | Industrial grade |
LC4064C-75T44I 44-pin tqfp 핀 구성 가이드
LC4064C-75T44I(44-pin tqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4064C-75T44I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4064C-75T44I 적합 용도: 6 애플리케이션s: Industrial Automation Control, Data-Acquisition Control, Bus Interface Bridging, Legacy Peripheral Emulation, Security and Access Control, LED and Display Control.
Industrial Automation Control
The LC4064C-75T44I fits industrial automation control logic when a machine controller needs programmable state machines, counters, and interface sequencing in a compact device. Its 64 macrocells provide a defined logic-building capacity, while the 168 MHz maximum operating frequency supports timing-critical control paths. The industrial-grade suffix and 44-pin TQFP package suit robust surface-mount control boards. Engineers should allocate pins early for machine I/O, isolate noisy actuator signals, and verify the complete operating-temperature and timing requirements against the manufacturer documentation before production release.
추천
Data-Acquisition Control
The LC4064C-75T44I can consolidate data-acquisition sequencing, sampling triggers, buffer controls, and status decoding into one programmable-logic device. The 64-macrocell architecture is suitable for deterministic control blocks that coordinate sensors, counters, and digital interfaces, while the 168 MHz maximum frequency provides margin for timing-critical acquisition logic. Place the device away from switching-regulator and high-current sensor paths, keep clock routing short, and validate each acquisition-control path against the -75 speed grade and the device's verified I/O capabilities.
추천
Bus Interface Bridging
The LC4064C-75T44I is appropriate for compact bus-interface bridging and protocol translation where combinational decoding, address qualification, and registered control logic must operate predictably. Its 64 macrocells and 168 MHz maximum frequency allow multiple related finite-state functions to share one package. The 44-pin TQFP footprint simplifies board assembly compared with larger leaded packages. Signal-integrity review remains essential: assign unused pins according to the datasheet, confirm supported I/O standards, and avoid routing high-speed bus transitions next to sensitive clock or reset nets.
추천
Legacy Peripheral Emulation
The LC4064C-75T44I can implement programmable replacements for fixed-function glue logic used around legacy peripherals, including address decoding, command sequencing, interrupt qualification, and status-register emulation. The 64-macrocell capacity permits several related logic functions to be consolidated, and the -75 speed grade targets a 168 MHz maximum operating frequency. Confirm pin-level signal direction and voltage compatibility before substituting the original device. A bench validation should cover normal operation, reset, write cycles, read cycles, and every illegal or partially selected interface state.
추천
Security and Access Control
The LC4064C-75T44I can implement deterministic access-control sequences, lock mechanisms, command filters, and tamper-alarm logic when the required functions fit within 64 macrocells. Its in-system-programmable architecture allows the logic configuration to be updated as system requirements evolve, and the 168 MHz maximum frequency supports precisely timed authentication or sequencing blocks. Security implementations should still separate sensitive configuration storage from routine logic, add external authorization where required, and validate reset, fault, and power-loss behavior rather than relying on programmable logic alone for a complete security boundary.
추천
LED and Display Control
The LC4064C-75T44I is suitable for display and LED-control subsystems that require multiplexed timing, segment decoding, animation counters, and programmable refresh sequences. Its 64 macrocells allow several display functions to share a single device, while the 168 MHz maximum frequency supports clocked timing functions with timing margin. Use the manufacturer I/O guidance to confirm drive capability before connecting displays directly, buffer high-current LED outputs externally, and keep display return-current paths away from sensitive timing and configuration nets.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4064C-75T44I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4064C-75TN44I | LC4064C-75T44C | LC4064V-75T44I | LC4064V-75TN44I | LC4064B-75T44I |
|---|---|---|---|---|---|---|
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000V | ispMACH 4000V | ispMACH 4000B |
| Speed Grade | -75 | -75 | -75 | -75 | -75 | -75 |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
주요 차별점
- Target ordering option preserves the industrial temperature designation (vs LC4064C-75T44C)
- Direct LC4064C family continuity for design migration (vs LC4064V-75T44I)
- Nominal speed-grade match reduces timing-class migration risk (vs LC4064B-75T44I)
설계 노트
Use the manufacturer TQFP-44 land pattern and pin-description table as the controlling PCB references. Preserve the pin-1 orientation, verify the exposed-pad treatment if required by the package drawing, and keep configuration pins clear of unintended traces. Place decoupling capacitors close to the supply and ground pins shown in the datasheet rather than distributing them uniformly around the package.
Route clocks, reset, and high-fanout programmable signals away from switching nodes and noisy I/O returns. Use a continuous ground reference beneath the device where the package and board stackup permit, avoid stubs on configuration paths, and apply the I/O timing constraints for the -75 grade and 168 MHz maximum operating condition. Validate timing with the actual compiled design rather than relying only on the device headline frequency.
Do not substitute an LC4064B, LC4064V, or LC4064C variant based only on the 44-pin package and -75 suffix. Check the complete pin-description table, I/O voltage arrangements, configuration interface, power pins, macrocell capacity, temperature grade, and timing specifications. The commercial C suffix is particularly unsuitable when the original I suffix was selected for an industrial temperature environment.
규정 준수 정보
The part is a programmable logic device, so AEC-Q100 qualification is not applicable as an automotive qualification claim. Compliance attributes require confirmation from the manufacturer material declaration or product documentation.