LC4128B-5T128I - 380MHz 128-Macro-Cell CPLD | Lattice Semiconductor
MPN: LC4128B-5T128I ✗ 停產LC4128B-5T128I 概覽
A CPLD, or complex programmable logic device, is a user-programmable semiconductor within the broader FPGA and CPLD hierarchy. It combines programmable logic blocks, programmable interconnect, and user I/O in one integrated circuit. Compared with fixed-function logic, a CPLD allows design changes to be implemented by reprogramming the device rather than changing the PCB. This makes CPLDs useful when control logic must evolve, require deterministic pin assignments, or need a compact nonvolatile configuration implementation.
The LC4128B-5T128I provides up to four programmable global clock pins, high-density logic capacity, and I/O operation across multiple supply-voltage options. Its -5 speed designation corresponds to the published 380 MHz maximum operating frequency and 2.5 ns propagation-delay figures. The 128-macro-cell device can implement substantially more Boolean logic than small PAL or GAL derivatives while retaining the straightforward programming workflow associated with Lattice CPLD products.
The -5 grade is intended for designs where timing margin is important and the 380 MHz operating-frequency figure is required. Designers should evaluate the complete timing path, including clock distribution, interconnect delay, output loading, and external round-trip delay, rather than treating maximum frequency as a guaranteed system clock rate. The 64 user I/Os also provide a balance between programmable logic and board connectivity in a 128-pin gull-wing package.
Typical uses include industrial control, instrumentation, communications interface logic, test equipment, embedded control, and general-purpose glue logic. The device is especially suitable for a control subsystem that needs several clocks, numerous registered I/O operations, and frequent prototype revisions. In-System Programmable operation can shorten board bring-up because configuration updates can be performed in the assembled system rather than requiring the device to be separately programmed before installation.
PCB design should preserve the supply and ground distribution required by the manufacturer datasheet, place decoupling capacitors close to the power pins, and route high-speed clock signals with short, controlled-impedance paths. Because timing-critical designs can be affected by loading and board topology, validate the final configuration using the same package and board conditions used for production.
This product page combines the published LC4128B-5T128I specifications with package information, qualified same-package alternatives, comparison data, and practical implementation guidance. It is intended to help engineers identify the correct speed grade, understand the 128-pin footprint, and plan a pin-compatible replacement without overlooking programming, timing, or layout requirements.
直接替換替代品,適用於 LC4128B-5T128I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LC4128B-5TN128I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4128B-75T128I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4128B-5T128I 最大額定值與電氣特性
| Device Type | In-System Programmable SuperFAST High-Density PLD |
| Macro Cells | 128 macro cells |
| Maximum Operating Frequency | 380 MHz |
| Propagation Delay | 2.5 ns |
| User I/O Pins | 64 pins |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Logic Family | CMOS |
| Global Clock Pins | Up to 4 programmable global clock pins |
| Programmability | In-System Programmable |
| Package Type | 128-pin TQFP |
| Terminal Count | 128 pins |
| Package Shape | Square |
| Lead Style | Gull-wing |
| Peak Reflow Temperature | 240 C |
LC4128B-5T128I square 腳位配置指南
LC4128B-5T128I(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4128B-5T128I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4128B-5T128I 適用於 6 應用s: Industrial Control Logic, Test and Measurement Instrumentation, Communications Interface, Embedded System Control, LED and Display Control, Security and Access Control.
Industrial Control Logic
The LC4128B-5T128I fits centralized industrial control because 128 macro cells can consolidate sequencing, interlocks, status decoding, and communication-interface logic that would otherwise occupy several smaller programmable devices. Its 64 user I/Os provide substantial connectivity for sensors, actuators, and field-bus transceivers, while the published 380 MHz maximum operating frequency supports timing-critical control paths. In-System Programmable capability also allows logic revisions during commissioning without changing the PCB. Validate industrial temperature, isolation, and EMC requirements against the finished equipment specification before release.
推薦
Test and Measurement Instrumentation
For oscilloscope, logic-analyzer, and automated test equipment, the LC4128B-5T128I can implement timing control, trigger sequencing, acquisition-state management, and front-panel decoding in one programmable device. The -5 grade provides a 2.5 ns propagation delay and up to 380 MHz operating frequency, useful when control logic must meet short instrument timing intervals. Its 64 user I/Os support probes, status indicators, and control interfaces. The final design should verify clock jitter, output skew, termination, and analog-instrument signal integrity separately from the digital CPLD timing.
推薦
Communications Interface
The LC4128B-5T128I is appropriate for protocol adapters, interface controllers, and communications equipment that require several clocks alongside deterministic control logic. Its four programmable global clock pins can organize clock domains, while 128 macro cells and 64 I/Os provide room for framing, filtering, error handling, and interface multiplexing. The 380 MHz maximum operating frequency allows clocked logic to be implemented without moving to a larger FPGA. Engineers should still calculate worst-case interconnect, package, and external-device timing rather than assuming the headline frequency applies to every path.
推薦
Embedded System Control
The LC4128B-5T128I can act as a deterministic companion controller beside a microprocessor or microcontroller, implementing power sequencing, watchdog supervision, bus arbitration, peripheral decoding, and real-time state machines. Consolidating these tasks in 128 macro cells may reduce board area, while In-System Programming supports firmware-like updates during development. The 64 user I/Os allow direct interaction with sensors, resets, and peripheral control lines. Confirm pin multiplexing, configuration behavior, and startup state in the device documentation when the CPLD participates in a safety- or mission-critical control sequence.
推薦
LED and Display Control
The LC4128B-5T128I is suitable for display timing, LED scanning, keypad decoding, status sequencing, and programmable pattern generation. Sixty-four user I/Os can drive multiple indicator groups or multiplex display segments, while the programmable clock structure supports regular refresh and blanking intervals. The high-speed grade gives designers margin when combining refresh counters, character generators, and serial display interfaces in one device. Validate output-drive limits, transition timing, and ground bounce on the PCB, especially when many external lines change simultaneously.
推薦
Security and Access Control
The LC4128B-5T128I can consolidate credential-reader interfaces, keypad scans, alarm logic, door sequencing, and event latching in a compact programmable-logic implementation. Its 128 macro cells support multiple state machines, while 64 I/Os provide practical connectivity for readers, indicators, relays, and supervisory inputs. The high operating frequency allows pipelined filtering or bus decoding when required. A security-critical design should add device-level configuration protection and anti-tamper controls, and it should verify the exact electrical limits and environmental ratings of the production-grade part.
推薦
推薦產品摘要
工程參考資料,適用於 LC4128B-5T128I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4128B-5TN128I | LC4128B-75T128I |
|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 128-pin TQFP | 128-pin TQFP - same | 128-pin TQFP - same |
| Device Family | LC4128B SuperFAST High-Density PLD | LC4128B SuperFAST High-Density PLD | LC4128B SuperFAST High-Density PLD |
| Supply Voltage | 1.8 V, 2.5 V, and 3.3 V | 2.5 V | 1.8 V, 2.5 V, and 3.3 V |
| Programmability | In-System Programmable | In-System Programmable | In-System Programmable |
主要差異化特點
- Higher published timing performance than the compared 227 MHz-class configuration (對比LC4128B-5TN128I)
- High logic and I/O density in a 128-pin TQFP (對比LC4128B-75T128I)
- Multiple supported core-voltage configurations (對比LC4128B-5TN128I)
設計說明
Use the manufacturer package drawing to reproduce the 128-pin TQFP footprint, including lead span, pitch, solder-mask clearance, and land pattern. Place decoupling capacitors close to the device's power and ground pins and provide a low-impedance distribution network. Because this device supports 1.8 V, 2.5 V, and 3.3 V configurations, verify the selected rail against the pinout before finalizing decoupling and mixed-signal isolation.
Treat clock and other high-speed nets as controlled-impedance routes when their timing matters. Keep the clock source and first receiving register as close as practical, minimize stubbing, and avoid routing sensitive signals adjacent to switching outputs or the clock network. Validate timing with the actual board load, connector, and external-device delays; the 380 MHz maximum operating frequency is a device capability rather than a guarantee for every external path.
Do not treat equal package dimensions as proof of drop-in compatibility. Before substituting LC4128B-75T128I or LC4128B-5TN128I, compare the exact pin assignment, supply-voltage table, temperature range, configuration pins, timing grade, and programming requirements. A slower speed grade can fail an existing timing closure even when it fits the same PCB footprint.
Review the manufacturer's recommended I/O use, output-drive strength, input thresholds, and simultaneous-transition requirements for the selected supply voltage. Establish controlled rise and fall times for sensitive interfaces, add series damping where appropriate, and test signal integrity with the intended load. Four global clock pins do not eliminate the need to manage clock distribution and board-level return paths.
合規資訊
Compliance declarations were not identified in the manufacturer or distributor material associated with this MPN. Confirm Pb-free status, RoHS, REACH, and other environmental requirements using the documentation accompanying the production lot.