LC4256C-5T100C - 5 ns SuperFLASH CPLD 100-Pin | Lattice
MPN: LC4256C-5T100C ✓ 啟用中LC4256C-5T100C 概覽
A CPLD is a programmable-logic device whose internal macrocells and interconnect arrays are organized to implement combinational and sequential control logic through a user-defined netlist. The ispMACH 4000C family combines this programmable architecture with SuperFLASH memory and supports repeated in-system configuration, allowing logic designs to be loaded or updated without removing the device from its assembled circuit. This makes the technology useful where deterministic control behavior, field reconfiguration, or compact integration is important.
The LC4256C-5T100C is associated with 3.3 V, 2.5 V, and 1.8 V operation, while one distributor specification identifies a 1.65 V to 1.95 V internal supply range. The “-5” ordering code denotes the manufacturer’s 5 ns performance class within the family. Its T100 designation identifies the 100-pin package option, and the “C” suffix distinguishes the ispMACH 4000C family from other Lattice CPLD families. Exact I/O counts and pin-level functions require confirmation in the Lattice Semiconductor datasheet.
The SuperFLASH architecture retains the programmed configuration in nonvolatile memory, so the logic remains available after power is removed and does not require configuration from an external serial flash at every startup. In-system programming also supports design updates through dedicated programming interfaces when the system design exposes the required pins. This architecture is especially useful for industrial control, communication interfaces, test equipment, embedded system support logic, and general-purpose glue logic requiring predictable routing without a full FPGA solution.
Typical application roles include bus-interface control, peripheral addressing, data-format conversion, state-machine implementation, interrupt and arbitration logic, and low-latency system-control functions. The device can consolidate multiple small logic functions into one programmable component, reducing board area compared with separate programmable logic devices. Designers should also verify system-level timing, I/O standards, and initialization behavior against the specific design and operating conditions.
Design integration should begin with the manufacturer pin-description table and package drawing. Confirm the supply topology, decoupling requirements, configuration pins, JTAG or programming connections, and all I/O assignments before schematic capture. Because the available technical extract does not reproduce the complete pinout, use the Lattice Semiconductor package documentation rather than inferring unused or no-connect positions.
This page organizes the confirmed family, voltage, speed-class, and package information into an engineering-oriented reference. It also identifies verified pin-compatible alternatives, comparison criteria, and practical integration considerations so designers can assess replacement options without confusing a temperature-grade or speed-grade change with a different package footprint.
直接替換替代品,適用於 LC4256C-5T100C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4256C-5T100C (相同外形與佔位) — 差異在於 Device Type.
LC4256C-5T100I
✅ 直接替換聯絡詢價
查看資料表 →LC4256C-3T100C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LC4256C-5T100
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LC4256C-5T100C 最大額定值與電氣特性
| Device Type | Complex programmable logic device |
| Device Family | ispMACH 4000C |
| Architecture | SuperFLASH high-density PLD |
| Configuration Memory | Nonvolatile SuperFLASH |
| Programming Method | In-system programmable |
| Performance Class | 5 ns |
| Supported Supply Levels | 3.3 V, 2.5 V, and 1.8 V |
| Internal Supply Range | 1.65 V to 1.95 V |
| Package Designation | T100, 100-pin package option |
LC4256C-5T100C t100, 100-pin package option 腳位配置指南
LC4256C-5T100C(t100, 100-pin package option 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4256C-5T100C.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4256C-5T100C 適用於 6 應用s: Industrial Control Logic, Bus Interface and Address Decoding, Protocol Interface Consolidation, Test and Measurement Equipment, Embedded System Support Logic, Communication Equipment Control.
Industrial Control Logic
The LC4256C-5T100C fits industrial control systems that require deterministic programmable logic without the overhead of a large FPGA. Its 5 ns performance class is appropriate for coordinating machine controls, sequencing actuators, managing interlocks, and translating between sensor inputs and actuator commands. Nonvolatile SuperFLASH configuration preserves the control design across power cycles, while in-system programming permits logic updates when the system exposes the required programming interface. Before release, verify the selected temperature grade, I/O voltage limits, clock requirements, and industrial environmental constraints.
Bus Interface and Address Decoding
The LC4256C-5T100C can consolidate address decoding, bus arbitration, interrupt routing, and peripheral-select logic into one configurable device. The 5 ns class provides a suitable starting point for compact synchronous interfaces where propagation delay must remain predictable. Its in-system programmability allows interface logic to be revised without replacing the assembled board, and nonvolatile configuration avoids a serial-programming sequence after every power-up. Engineers should use the manufacturer timing tables to establish setup, hold, recovery, and removal requirements for each implemented path.
Protocol Interface Consolidation
The LC4256C-5T100C is suitable for protocol front ends that require programmable state machines, data-format conversion, or framing logic. A 5 ns performance class supports common control and low-to-moderate-speed interface tasks when the design avoids excessive combinational depth. SuperFLASH retains the configuration in nonvolatile memory, which simplifies deployment in equipment that must resume operation after power restoration. Confirm the supported I/O standards, available clock sources, and exact input/output count in the Lattice Semiconductor datasheet before assigning signals.
Test and Measurement Equipment
The LC4256C-5T100C can serve as a configurable sequencer, trigger conditioner, or control block inside automated test equipment. The 5 ns class supports predictable logic timing, while in-system programming allows test sequences and interface features to be updated quickly. Nonvolatile configuration is useful in instruments expected to power up directly into a defined state. The design should account for clock jitter, fanout, input thresholds, and output loading rather than treating the 5 ns ordering code as a complete timing guarantee.
Embedded System Support Logic
The LC4256C-5T100C is useful for implementing peripheral chip selects, reset sequencing, watchdog logic, interrupt prioritization, and other glue logic around a processor. Consolidating these functions into one programmable CPLD can reduce board area and simplify revisions. Its 5 ns class is suitable for many control paths, while SuperFlash configuration provides reliable nonvolatile storage of the logic definition. Validate reset behavior, clock-domain boundaries, I/O direction, and power-state requirements during schematic review.
Communication Equipment Control
The LC4256C-5T100C can implement framing, channel control, alarm logic, and status sequencing in communication equipment. Its in-system programming supports product variants and field updates, while the nonvolatile configuration allows rapid startup behavior. The 3.3 V, 2.5 V, and 1.8 V supply support gives designers flexibility when connecting the device to multiple logic domains. Exact I/O compatibility, clock requirements, and timing margins must still be confirmed against the selected system voltage and the manufacturer electrical tables.
工程參考資料,適用於 LC4256C-5T100C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4256C-5T100I | LC4256C-3T100C | LC4256C-5T100 |
|---|---|---|---|---|
| Package | T100, 100-pin package option | T100, 100-pin package option | T100, 100-pin package option | T100, 100-pin package option |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Performance Class | 5 ns | 5 ns | 3 ns | 5 ns |
| Ordering Suffix | C suffix | I suffix | 3 ns speed class | No C suffix |
主要差異化特點
- Direct 5 ns family ordering option (對比LC4256C-3T100C)
- Documented same-package temperature-grade option (對比LC4256C-5T100I)
- Multi-voltage support within the ispMACH 4000C family (對比LC4256C-5T100)
設計說明
Begin routing from the manufacturer’s T100 footprint rather than a generic 100-pin drawing. Confirm pin-one orientation, exposed or thermal features if applicable, pad dimensions, and whether the package includes an exposed pad. Place configuration signals in a location that avoids conflicts with high-speed outputs and keep the device’s supply connections close to their associated decoupling capacitors.
Separate the device’s supported external supply arrangement from the identified 1.65 V to 1.95 V internal supply range. Confirm which rails must be supplied externally, their permitted tolerance, sequencing requirements, and the values and placement of bypass capacitors prescribed in the Lattice Semiconductor datasheet. Incorrect rail configuration is a common cause of unstable programming or unreliable I/O operation.
Use the 5 ns ordering class as an architecture-selection guideline, not as proof that every path will meet a 5 ns system requirement. Evaluate setup, hold, clock skew, fanout, output loading, and routing delay using the device timing tables. Add registered logic stages when a combinational path cannot satisfy the target clock period, and avoid deriving high-speed clock signals directly from general-purpose I/O.
Do not approve a substitute from its package pin count alone. Confirm the programming interface, configuration behavior, supply pins, I/O standards, timing class, and temperature grade. The LC4256C-5T100I is the closest documented option, but its suffix identifies a different grade. Likewise, a 3 ns device in the same T100 family is faster but may not be a functionally acceptable replacement where the ordering code, qualification, or configuration must remain unchanged.
合規資訊
The available product records identify the device and its technical family but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.