Lattice Semiconductor

LFE2-70E-5F900I - 68K LUT ECP2 FPGA | Lattice Semiconductor

MPN: LFE2-70E-5F900I ✗ 停產
1.2 V Vdss 900-ball BGA Package -5 Speed
MOQ: 1 |

LFE2-70E-5F900I 概覽

Lattice Semiconductor LFE2-70E-5F900I is an ECP2/M field-programmable gate array with 68K LUTs, 583 I/O, 1,032 Kbit of block RAM, and a 1.2 V core supply in a 900-ball BGA package. The -5 speed grade and industrial-temperature designation make it suitable for embedded logic, control, interface, and signal-processing designs requiring a high pin count and substantial programmable logic capacity.

An FPGA is a programmable semiconductor in which interconnected logic blocks, embedded memory, and programmable I/O are configured at runtime. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and combines parallel hardware processing with software-controlled configuration. Unlike a fixed-function microcontroller, this device can implement multiple digital functions concurrently while retaining field-updatable logic through its configuration system.

The 68K LUTs provide substantial capacity for datapath, protocol, control, and glue-logic implementations. Its 583 I/O supports systems requiring numerous external connections, while 1,032 Kbit of embedded block RAM provides on-chip storage for buffers, lookup structures, and data paths. A 1.2 V core supply supports low-voltage logic operation, and the 900-ball BGA package provides the interconnect density required by the 70E device in demanding embedded applications.

The ECP2 architecture is implemented using a 90 nm process according to the published component classification. The -5 marking identifies the device speed grade, while the I suffix identifies the industrial-temperature option. The stated industrial junction-temperature range is -40 °C to 100 °C. This combination gives designers a useful distinction between logic performance, environmental qualification, and package-level thermal constraints when planning system qualification.

Typical uses include industrial automation controllers, multi-channel data-acquisition systems, industrial networking equipment, embedded video or image processing, communications infrastructure, and test-and-measurement instruments. The large I/O count is particularly useful where multiple buses, converters, memory interfaces, and control signals converge on one programmable device. Its embedded block RAM can support packet buffering, parallel data collection, and lookup functions without requiring an external memory device in moderate designs.

PCB implementation requires careful power-plane and via planning because the 900-ball package provides fine-pitch, high-density routing and requires controlled escape routing from the device. Decoupling should be distributed near the power balls, while programming, configuration, clock, and user-I/O circuits should be routed to reduce skew and signal-integrity problems. Differential and high-speed interfaces must follow the device-family layout guidance, and unused balls should be treated according to the manufacturer package and board-connection instructions.

This product page combines the exact orderable-device specifications with package, lifecycle, application, and design guidance. It also identifies same-package ECP2 alternatives and explains the speed-grade and temperature differences that must be checked before a replacement is approved.

直接替換替代品,適用於 LFE2-70E-5F900I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LFE2-70E-5F900I (相同外形與佔位) — 差異在於 Device Type, Speed Grade, Package.

Lattice Semiconductor
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Package: 900-BBGA, square ball-grid array
比較對象 LFE2-70E-5F900I →
Lattice Semiconductor
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Speed Grade: -6
Package: 900-pin BGA (900-BBGA)
比較對象 LFE2-70E-5F900I →

LFE2-70E-5FN900I

✅ 直接替換
📦 900-BBGA
Same ECP2 70E family, -5 speed grade, and 900-BBGA package; ordering-option and temperature-rating differences require final confirmation

📋 參考替代品(不在目錄中)

LFE2-70E-6F900I

✅ 直接替換
Lattice Semiconductor
📦 900-BBGA
ECP2 Field Programmable Gate Array (FPGA) · 68,000 LUTs (68K LUTs) · 583 I/O · 1.2 V · -6 · Industrial · 900-pin BGA (900-BBGA) · 31 x 31 mm

聯絡詢價

查看資料表 →

LFE2-70E-7F900I

✅ 直接替換
📦 900-BBGA
Same ECP2 70E family and 900-BBGA package; -7 speed grade is two grades faster than -5, increasing timing margin but changing power behavior

📋 參考替代品(不在目錄中)

LFE2-70E-8F900I

✅ 直接替換 ⚠️ 規格未經驗證
📦 900-BBGA
Same ECP2 70E family and 900-BBGA package; -8 speed grade is three grades faster than -5, requiring timing, power, and thermal revalidation

📋 參考替代品(不在目錄中)

LFE2-70E-5F900C

✅ 直接替換 ⚠️ 規格未經驗證
Lattice Semiconductor
📦 900-BBGA
ECP2 Field Programmable Gate Array (FPGA) · 68,000 LUTs · 68,000 LUTs · 583 I/O · DSP blocks present · 1.2 V · -5 · 1,056,768 gates

聯絡詢價

查看資料表 →

LFE2-70E-5F900I 最大額定值與電氣特性

Device Type ECP2/M FPGA
Programmable Logic Capacity 68K LUTs
User I/O Count 583 I/O
Embedded Block RAM 1,032 Kbit
Core Supply Voltage 1.2 V
Process Technology 90 nm
Speed Grade -5
Temperature Grade Industrial
Junction Temperature Range -40 °C to 100 °C
Package Type 900-ball BGA
Package Pin Count 900 balls
安裝方式 Surface mount
Packaging Form Tray

LFE2-70E-5F900I 900 balls 腳位配置指南

LFE2-70E-5F900I(900 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LFE2-70E-5F900I 的 900 balls 封裝腳位圖

無詳細腳位定義資料: LFE2-70E-5F900I.

請參閱 資料表 以查看完整腳位配置。

典型應用

LFE2-70E-5F900I 適用於 6 應用s: Industrial Automation Controller, Multi-Channel Data Acquisition, Industrial Networking Equipment, Embedded Video Processing, Test and Measurement Instrument, Communications Infrastructure.

🏭

Industrial Automation Controller

The LFE2-70E-5F900I fits industrial automation controllers that combine machine sequencing, sensor conditioning, actuator control, and communications in one programmable device. Its 68K LUTs can implement control state machines and hardware protocols, while 583 I/O provides connections for field inputs, outputs, encoders, and interface converters. The 1,032 Kbit of block RAM supports data histories, diagnostic buffers, and communication packet staging. According to the manufacturer datasheet, the industrial option has a -40 °C to 100 °C junction-temperature range, making it appropriate for controlled industrial equipment when enclosure and thermal limits are satisfied.

📊

Multi-Channel Data Acquisition

The LFE2-70E-5F900I is suited to parallel data-acquisition systems requiring numerous sensor inputs, converters, counters, and digital control signals. The 583 I/O count can connect multiple converter data buses and digital sensor channels, while the 68K LUTs can implement sampling control, filtering, thresholding, and data-format conversion. Its 1,032 Kbit of embedded block RAM can buffer acquired samples before transfer. According to the manufacturer datasheet, the device operates from a 1.2 V core supply, so board-level power planning must separate core, configuration, and I/O requirements while maintaining signal-integrity control for high-rate converter interfaces.

🌐

Industrial Networking Equipment

The LFE2-70E-5F900I can implement protocol engines, packet classifiers, interfaces, and supervisory logic in industrial networking equipment. Its 68K LUTs support parallel datapaths and state machines, and its embedded block RAM can accommodate packet buffering or descriptor tables. The 583 I/O count is valuable for parallel Ethernet or legacy industrial interfaces, although high-speed differential routing still requires the manufacturer ECP2 design guidance. According to the manufacturer datasheet, the -5 speed grade and industrial-temperature designation support embedded networking systems where predictable timing and extended operating conditions are important.

📺

Embedded Video Processing

The LFE2-70E-5F900I is appropriate for parallel pixel pipelines, frame timing, control logic, and interface adaptation in embedded imaging systems. Its 68K LUTs can execute datapath stages and control algorithms, while 1,032 Kbit of block RAM can implement line buffers, FIFO structures, and compact image-processing stages. The 583 I/O count allows direct connection of cameras, serializers, memory devices, and converters. According to the manufacturer datasheet, the device is a 1.2 V ECP2/M FPGA in a 900-ball BGA, requiring careful high-speed layout, continuous power delivery, and thermal review when wide video paths operate continuously.

🔧

Test and Measurement Instrument

The LFE2-70E-5F900I fits programmable test and measurement equipment requiring extensive I/O, deterministic control, and flexible logic resources. The 583 I/O can support pattern generation, channel control, trigger distribution, and converter connections, while the 68K LUTs can implement timing engines, sequencers, and analysis pipelines. Its 1,032 Kbit of embedded block RAM can hold captured samples or instrument state. According to the manufacturer datasheet, the device uses a 1.2 V core supply and is packaged in a 900-ball BGA, so power integrity and precise clock distribution are central to repeatable measurement performance.

📡

Communications Infrastructure

The LFE2-70E-5F900I can serve as the programmable control and data-processing element in communications infrastructure, including protocol conversion, line-card control, timing, and diagnostic functions. Its 68K LUTs support concurrent datapaths, and 1,032 Kbit of block RAM can implement buffers and state tables without requiring a separate memory device for moderate workloads. The 583 I/O provides extensive connectivity for backplane devices and parallel interfaces. According to the manufacturer datasheet, the industrial junction-temperature range is -40 °C to 100 °C, making the device suitable for managed equipment where airflow, enclosure temperature, and transient performance remain within system limits.

推薦產品摘要

TS5420 Interface companion for industrial signal-chain designs 用於: Industrial Automation Controller ISO7741 Digital isolation companion for field interfaces 用於: Industrial Automation Controller ADS1256 High-resolution analog-to-digital converter companion 用於: Multi-Channel Data Acquisition SN74LV4053 Analog multiplexing companion 用於: Multi-Channel Data Acquisition DP83867IS Gigabit Ethernet interface companion 用於: Industrial Networking Equipment TLV1102 Low-power comparator companion 用於: Industrial Networking Equipment DS90UB600 High-speed video interface companion 用於: Embedded Video Processing SN74LVC1G125 Buffer and level-interface companion 用於: Embedded Video Processing AD9361 RF transceiver companion for signal-generation systems 用於: Test and Measurement Instrument OPA2377 Low-noise analog front-end companion 用於: Test and Measurement Instrument SN65HVD3082 RS-485 interface companion 用於: Communications Infrastructure AM26LV31 RS-422 driver companion 用於: Communications Infrastructure
What is the LFE2-70E-5F900I?
The LFE2-70E-5F900I is a Lattice Semiconductor ECP2/M field-programmable gate array with 68K LUTs, 583 I/O, 1,032 Kbit of block RAM, and a 1.2 V core supply. According to the manufacturer datasheet, it uses 90 nm process technology, is offered in a 900-ball BGA package, and carries the -5 speed grade and industrial-temperature designation. Its combination of logic capacity and I/O density supports control, communication, acquisition, and embedded signal-processing functions.
How many LUTs and I/O does the LFE2-70E-5F900I have?
The LFE2-70E-5F900I provides 68K LUTs and 583 user I/O. According to the manufacturer datasheet, the device also contains 1,032 Kbit of embedded block RAM. These resources allow multiple digital subsystems to be implemented in parallel, including control logic, protocol handling, data buffering, and lookup functions. The 583 I/O count is particularly important when the design must connect several converters, memory devices, communications links, and discrete control signals.
What package does the LFE2-70E-5F900I use?
The LFE2-70E-5F900I is supplied in a 900-ball BGA package with a surface-mount installation style and tray packaging. According to the manufacturer datasheet, the high-ball-count package accommodates the ECP2 device's extensive user-I/O resources. Because the package contains 900 contacts, PCB layout must include adequate escape routing, power distribution, thermal management, and assembly-process controls; a conventional two-row or perimeter package footprint is not interchangeable.
What is the operating temperature range of LFE2-70E-5F900I?
The LFE2-70E-5F900I is the industrial-temperature variant, with a stated junction-temperature range of -40 °C to 100 °C. According to the manufacturer datasheet, the I suffix identifies this industrial grade. The junction rating is not the same as a guaranteed ambient enclosure temperature, so final thermal analysis must account for board heating, airflow, copper area, adjacent devices, and the operating load assigned to the FPGA.
Where can I download the LFE2-70E-5F900I datasheet PDF?
The manufacturer datasheet should be used to obtain the authoritative ECP2 family pin list, electrical characteristics, configuration procedure, package drawings, and programming information for the LFE2-70E-5F900I. Search for the full orderable part number in the Lattice Semiconductor documentation system and select the ECP2/M datasheet. When using the PDF, verify that its device table includes the 70E device, -5 speed grade, industrial temperature option, and 900-ball package.
Where can I find the LFE2-70E-5F900I pinout?
The LFE2-70E-5F900I pinout is documented in the manufacturer ECP2/M package pinout and package drawings. It is a 900-ball BGA, so the ball map must be assigned by a compatible PCB library or verified directly against the package drawing rather than inferred from an I/O count of 583. Check power, ground, configuration, clock, and user-I/O balls against the exact package variant before routing a replacement board.
Is LFE2-70E-5F900I active or obsolete?
The LFE2-70E-5F900I is listed as obsolete and no longer manufactured. The component was previously offered by Lattice Semiconductor as an industrial-grade ECP2/M FPGA in a 900-ball BGA package. For an existing design, verify whether the programmed bitstream can be reused with a listed same-family replacement and confirm package, speed, temperature, voltage, timing, and configuration requirements before changing the bill of materials.
What is the best drop-in replacement for LFE2-70E-5F900I?
The closest documented replacement is the LFE2-70E-5FN900I because it retains the ECP2 70E device, -5 speed grade, 68K-LUT-class configuration, and 900-ball BGA package. According to the manufacturer family documentation, ordering options can differ in package, speed grade, and temperature rating, so family membership alone does not establish interchangeability. Confirm the complete pinout, electrical limits, configuration behavior, and qualification requirements before treating it as an approved drop-in part.
Can LFE2-70E-5FN900I replace LFE2-70E-5F900I?
The LFE2-70E-5FN900I is the most promising same-package candidate for the LFE2-70E-5F900I because both are Lattice ECP2 70E devices in 900-ball BGA packages with the same -5 speed designation. According to the manufacturer ECP2 comparison guidance, package and temperature options can differ, and family membership does not automatically prove interchangeability. Review the N-option ordering code and manufacturer pinout before approving the substitution.
LFE2-70E-5F900I vs LFE2-70E-6F900I: which is better for timing-critical designs?
The LFE2-70E-6F900I is the better candidate when a design requires the higher -6 speed grade, while the LFE2-70E-5F900I remains appropriate when the original -5 timing target is sufficient. According to the manufacturer ECP2 documentation, speed-grade and package options must be checked separately. A higher speed grade can improve timing margin, but it may alter power, thermal conditions, and qualification, so it should not be substituted without timing and power revalidation.
When should I choose LFE2-70E-5F900I over a faster ECP2 variant?
Choose the LFE2-70E-5F900I when an existing design specifically targets the -5 speed grade and the 900-ball industrial package, especially when its bitstream, timing closure, and qualification have already been validated. The LFE2-70E-6F900I can provide additional timing margin, while the LFE2-70E-7F900I offers a still faster grade. According to the manufacturer family documentation, selecting by speed alone can overlook differences in temperature rating, package, and operating constraints.
Is LFE2-70E-5F900I suitable for industrial automation?
The LFE2-70E-5F900I is suitable for many industrial automation applications because it combines 68K LUTs, 583 I/O, 1,032 Kbit of block RAM, and a -40 °C to 100 °C stated junction-temperature range. According to the manufacturer datasheet, it is an industrial-grade ECP2/M FPGA. Actual suitability depends on enclosure temperature, system airflow, transient response, safety requirements, and electromagnetic-compatibility qualification of the finished product.
What can replace the LFE2-70E-5F900I?
Lattice Semiconductor's LFE2-70E-5FN900I is the closest documented same-package candidate, while LFE2-70E-6F900I and LFE2-70E-7F900I are same-family alternatives with different speed grades. According to the manufacturer ECP2 comparison guidance, package, speed, and temperature ratings can differ and family membership does not establish pin compatibility. An engineering review of the exact orderable codes, pin maps, bitstream constraints, and electrical characteristics is therefore required.
Is LFE2-70E-5F900I the same as LFE2-70E-5FN900I?
The two devices are closely related ECP2 70E options in the same 900-ball BGA package, but they should not be treated as identical without reviewing the ordering-code differences. According to the manufacturer ECP2 comparison guidance, options can differ in temperature rating and related ordering characteristics. Review the manufacturer part-number decoder and device tables to determine what the N suffix changes, then confirm that the substitute satisfies the original environmental and qualification requirements.
Where can I buy LFE2-70E-5F900I and check current lead time?
Use the Request a Quote form on this page to request the LFE2-70E-5F900I, current lead time, and stock status. Because the device is listed as obsolete and no longer manufactured, procurement may depend on remaining original inventory or qualified sourcing. Include the required quantity, date code, packaging condition, traceability requirements, target price, and approved-alternative policy in the request so the supply response can be evaluated against the original design.
What are the key specifications engineers should know about LFE2-70E-5F900I?
The key specifications are 68K LUTs, 583 user I/O, 1,032 Kbit of block RAM, a 1.2 V core supply, 90 nm process technology, and a 900-ball BGA package. According to the manufacturer datasheet, the device is a -5-speed industrial ECP2/M FPGA with a stated -40 °C to 100 °C junction-temperature range. It is currently listed as obsolete, so lifecycle status and approved same-package alternatives are critical constraints for long-term production planning.
What is the Lattice equivalent for an obsolete LFE2-70E-5F900I design?
The LFE2-70E-5FN900I is the leading Lattice candidate because it is explicitly compared with the LFE2-70E-5F900I and shares the 900-ball BGA format and -5 speed designation. The LFE2-70E-6F900I and LFE2-70E-7F900I provide same-family alternatives with different speed grades. According to the manufacturer ECP2 guidance, package and temperature differences must be checked, and no cross-brand FPGA is established as pin-compatible by the available documentation.

工程參考資料,適用於 LFE2-70E-5F900I — 比較、設計指引及合規資訊。

選型指南

Select the LFE2-70E-5F900I when maintaining an existing industrial ECP2 design requires the original -5 speed grade, 900-ball BGA footprint, and established bitstream and timing constraints. It is specifically listed as obsolete, so new production should normally move to an approved lifecycle alternative rather than depend on residual inventory. The LFE2-70E-5FN900I is the closest same-speed, same-package candidate, but its ordering-option and temperature differences must be checked against the exact device tables. The LFE2-70E-6F900I or LFE2-70E-7F900I may be appropriate when additional timing margin justifies a speed-grade change and revised power, thermal, and qualification analysis. The LFE2-70E-5F900C shares the package and speed grade but uses a commercial-temperature option, making it unsuitable where the industrial junction-temperature requirement is mandatory. No cross-brand drop-in replacement is established because ECP2 configuration, package-ball assignments, and embedded resources are device-specific.

與替代品比較

參數 本產品 LFE2-70E-5FN900I LFE2-70E-6F900I LFE2-70E-7F900I LFE2-70E-8F900I LFE2-70E-5F900C
Package 900-BBGA 900-BBGA - same 900-BBGA - same 900-BBGA - same 900-BBGA - same 900-BBGA - same
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Family ECP2/M ECP2/M ECP2 ECP2 ECP2 ECP2/M
Speed Grade -5 -5 -6 -7 -8 -5
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V

主要差異化特點

  • Closest same-package speed-grade match (對比LFE2-70E-5FN900I)
  • Higher timing performance with the same footprint (對比LFE2-70E-6F900I)
  • Industrial-temperature ordering option (對比LFE2-70E-5F900C)

設計說明

The LFE2-70E-5F900I uses a 1.2 V core supply, so separate core and I/O supply planning is essential. Follow the manufacturer ECP2 power-supply and decoupling guidance for the exact package rather than applying a generic BGA power layout. Place the required bulk and high-frequency capacitors close to their designated supply balls, minimize supply-path inductance, and provide clean return connections through the ground plane. Verify startup sequencing, voltage tolerances, power-supply sequencing constraints, and maximum rail-to-rail conditions before powering the board.

A 900-ball BGA requires deliberate escape routing and a complete land pattern assembled from the manufacturer package drawing. Check ball assignments, power and ground balls, configuration pins, clock inputs, and user I/O directly against the LFE2-70E-5F900I documentation. Avoid inferred or automatically generated pin maps because package variants can differ in ball use. After routing, run DRC for all six signal layers and confirm that the selected PCB stack-up, via geometry, and assembly process meet the package's mechanical requirements.

The device is specified over a -40 °C to 100 °C junction-temperature range, which must not be treated as an unlimited ambient operating range. Estimate FPGA power at the intended clock, I/O activity, and memory utilization, then add power from converters and adjacent devices when calculating board-level temperature rise. Provide copper thermal paths beneath the package where the footprint permits, avoid blocking airflow around the BGA, and use the manufacturer junction-temperature estimate to define the maximum ambient temperature for each operating mode.

Route clocks, configuration signals, and high-speed user I/O as controlled-impedance nets, with clock distribution placed to minimize skew between destinations. Although the device supports many I/O, package density can create crosstalk and via-stitch requirements that differ from general-purpose board guidance. Apply the manufacturer's ECP2 layout rules, provide adequate return-path continuity beneath high-speed nets, and use simulation or measurement when edge rates make default PCB assumptions inadequate.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The component is an industrial-temperature FPGA rather than an automotive-qualified AEC-Q100 device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact orderable MPN.

相關搜尋

LFE2-70E-5F900I datasheet LFE2-70E-5F900I pinout LFE2-70E-5F900I datasheet pdf LFE2-70E-5F900I equivalent LFE2-70E-5F900I replacement LFE2-70E-5F900I cross reference LFE2-70E-5F900I vs LFE2-70E-6F900I LFE2-70E-5F900I footprint LFE2-70E-5F900I 900 BBGA LFE2-70E-5F900I price LFE2-70E-5F900I stock Lattice Semiconductor LFE2-70E-5F900I

相關元件與詞彙

Lattice Semiconductor LFE2-70E-5F900I LFE2-70E-5FN900I LFE2-70E-6F900I LFE2-70E-7F900I LFE2-70E-8F900I LFE2-70E-5F900C ECP2/M ECP2 FPGA field-programmable gate array programmable logic device semiconductor 68K LUTs 583 I/O 1,032 Kbit block RAM 1.2 V core supply 90 nm process technology -5 speed grade industrial temperature grade 900-BBGA BGA package family surface-mount technology industrial automation embedded block RAM
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情