LM393APSR - Dual 38V Open-Collector Comparator | Texas Instruments
MPN: LM393APSR ✓ 啟用中LM393APSR 概覽
A differential comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM393APSR belongs to the comparator hierarchy within analog and mixed-signal semiconductors, where open-collector outputs are useful for level translation, wired logic, and systems requiring an external pull-up resistor.
Key specifications include a low input offset voltage of 0.37 mV, a low input bias current of 3.5 nA, and a supply current of 200 µA per comparator. The maximum rating reaches 38 V, while the differential input range extends to ±38 V. An open-collector output can sink logic-level current and connect to TTL, MOS, or CMOS-compatible pull-up networks.
Each of the two channels is electrically independent, allowing simultaneous comparisons or separate threshold-monitoring tasks. The open-collector architecture provides useful flexibility: output rise time is determined by the pull-up resistor and associated capacitance rather than solely by an internal active pull-up. This also permits wired-open-drain logic and level translation between systems with different voltage domains.
Typical uses include industrial control and monitoring, sensor threshold detection, overvoltage and undervoltage supervision, automotive-style battery monitoring, switching-power-supply feedback loops, and general-purpose signal conditioning. The wide supply and differential-input ratings are particularly useful in systems where signal or supply transients may exceed ordinary low-voltage logic levels.
For reliable operation, place the pull-up resistor close to each open-collector output and verify the input common-mode range at the actual supply voltage. Decoupling capacitors should connect directly between the supply and ground pins. PCB signal-trace lengths should remain short to reduce noise pickup on high-impedance comparator inputs.
This page combines the official LM393A family information, package and ordering details, compatible comparison options, and practical implementation guidance. It helps engineers evaluate pin compatibility, output architecture, input characteristics, thermal limits, and replacement options before integrating the comparator into a new PCB.
直接替換替代品,適用於 LM393APSR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM393APSR (相同外形與佔位) — 差異在於 Package, Number of Channels, Output Type, Operating Temperature Range.
LM393BPS
✅ 直接替換📋 參考替代品(不在目錄中)
LM2903PSR
✅ 直接替換📋 參考替代品(不在目錄中)
LMV393DR
✅ 直接替換📋 參考替代品(不在目錄中)
LM393ADR
✅ 直接替換聯絡詢價
查看資料表 →LM393APSRG4
✅ 直接替換📋 參考替代品(不在目錄中)
LM393APSR 最大額定值與電氣特性
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 independent channels |
| Maximum Supply Voltage | 38 V |
| Differential Input Voltage Range | -38 V to +38 V |
| Input Offset Voltage | 0.37 mV |
| Input Bias Current | 3.5 nA |
| 供應電流 | 200 µA per comparator |
| 輸出類型 | Open collector |
| Logic Compatibility | TTL, MOS, and CMOS compatible |
| ESD Rating HBM | 2 kV |
| 工作溫度範圍 | 0°C to +70°C |
| Product Grade | Industrial grade |
| 封裝 | 8-pin SOP (PS), tape and reel |
| 安裝類型 | Surface mount |
LM393APSR 8-pin sop (ps), tape and reel 腳位配置指南
LM393APSR(8-pin sop (ps), tape and reel 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM393APSR.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM393APSR 適用於 6 應用s: Industrial Threshold Monitoring, Battery Voltage Supervision, Sensor Signal Conditioning, Power Supply Control, Wired Logic and Level Translation, Automotive Electrical Monitoring.
Industrial Threshold Monitoring
The LM393APSR fits industrial threshold monitoring because each of its two channels compares a signal against an independent reference with a specified input offset of 0.37 mV and input bias current of 3.5 nA. Place the reference and sensed voltage on the inverting and non-inverting inputs, then use an open-collector pull-up to drive a digital input. The 38 V maximum supply rating provides margin for industrial rails, while the 0°C to 70°C industrial temperature range supports factory equipment. Designers should verify the common-mode input range at the selected supply voltage and account for output saturation when the pull-up current exceeds the comparator’s sink capability.
推薦
Battery Voltage Supervision
The LM393APSR can supervise battery or DC-system rails when the monitored voltage fits the applicable common-mode range. One channel may detect an overvoltage condition and the other an undervoltage condition, using external reference dividers and separate open-collector outputs. Its 38 V maximum supply rating is useful for industrial battery packs, while the 0.37 mV input offset supports precise threshold placement. The implementation must prevent the input pins from exceeding their permitted range, account for divider tolerance and hysteresis, and use pull-up rails appropriate for the system receiving the fault signals.
推薦
Sensor Signal Conditioning
The LM393APSR is useful for converting a slowly changing sensor signal into a logic event by comparing the sensor against a reference. The 3.5 nA input bias current limits loading of high-impedance sensor networks, and the 0.37 mV offset supports accurate decisions near the reference level. Each independent channel can process a different threshold or can implement complementary detection with external feedback. Because the output is open collector, a pull-up resistor can set the interface voltage for TTL, MOS, or CMOS logic. Add deliberate hysteresis to prevent chatter around the switching threshold and route the high-impedance input traces away from switching nodes.
推薦
Power Supply Control
The LM393APSR can support power-supply control loops by comparing a scaled feedback voltage with a reference and driving a control input through its open-collector output. Its dual-channel arrangement allows independent overvoltage and undervoltage checks or two stages of supervisory control. The comparator’s 38 V supply-class rating supports wide-input industrial designs, while its low 200 µA-per-comparator supply current limits overhead in auxiliary monitoring circuits. Feedback dividers, compensation components, and the pull-up network must be designed around the intended switching topology. The open-collector output can pull an enable or control node low, but it cannot directly drive a high-voltage gate without an appropriate driver stage.
推薦
Wired Logic and Level Translation
The LM393APSR’s open-collector output supports wired-open-drain logic and level translation because the pull-up rail, rather than the output stage, establishes the high voltage. This allows a sensor or supervisory circuit to interface with logic operating at a different voltage. Two independent channels can implement wired AND behavior or combine fault signals. The design trade-off is that output rise time is set by the pull-up resistance and the capacitance of the connected bus. Use a pull-up strong enough to meet the receiver’s rise-time requirement but weak enough to remain within the comparator’s sink-current limit. Keep the bus short and use Schmitt action or external hysteresis where noisy conditions could cause multiple transitions.
推薦
Automotive Electrical Monitoring
The LM393APSR can be evaluated for automotive electrical monitoring when the complete operating environment is compatible with its 0°C to 70°C industrial rating. Its two channels support independent checks of a vehicle electrical rail, such as overvoltage and undervoltage conditions, while the 38 V maximum supply rating accommodates higher-voltage systems. The open-collector outputs are convenient for wired fault signals with external pull-ups. Automotive qualification requirements must be checked separately because the exact LM393APSR suffix is not presented as an AEC-Q100-qualified variant. Any candidate device should also be reviewed for load dump, transient immunity, temperature range, and automotive production requirements.
推薦
推薦產品摘要
工程參考資料,適用於 LM393APSR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM393BPS | LM2903PSR | LMV393DR | LM393ADR | LM393APSRG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOP (PS) | 8-pin SOP (PS) - same | 8-pin SOP (PS) - same | 8-pin SOP (PS) - same | 8-pin SOP (PS) - same | 8-pin SOP (PS) - same |
| Comparator Configuration | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
| Output Type | Open collector | Open collector | Open collector | Open collector | Open collector | Open collector |
主要差異化特點
- Higher voltage headroom than LM2903 (對比LM2903PSR)
- Low input offset supports precise thresholds (對比LMV393DR)
- Dual independent open-collector channels (對比LM2903PSR)
- Direct SOIC footprint reuse (對比LM393BPS)
設計說明
Route each open-collector output directly to its pull-up resistor and receiving circuit to minimize loop area and switching noise. Keep the comparator input traces short and away from power-switching nodes, inductors, and high-current return paths. Place the supply bypass capacitor directly between the device supply and ground pins, with a short ground return. Because the inputs can present very high impedance, keep surrounding copper and test-point leakage in mind when setting accurate thresholds.
The pull-up resistor sets the output high level and determines the open-collector sink current. Select it so the maximum low-state current remains below the comparator’s output sink limit, while the resistance and total bus capacitance provide the required rise time. Estimated relationship: output rise time is approximately 2.2 times pull-up resistance times total bus capacitance. Confirm that the pull-up supply voltage is permitted by the output structure and that its current remains within system power limits.
Do not assume that the 38 V maximum supply rating permits every input to remain at 38 V under all operating conditions. Verify the common-mode input range, differential input limit, and supply-current behavior at the actual rail voltage. Also add hysteresis around thresholds where noise or slow input slopes could cause output chatter. For battery systems, the pull-up rail must remain present long enough for downstream circuitry to interpret the open-collector fault signal reliably.
合規資訊
The exact LM393APSR ordering suffix is identified as an industrial-grade 8-pin SOP comparator. No exact RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was established for this suffix.