Texas Instruments

LM393APSR - Dual 38V Open-Collector Comparator | Texas Instruments

MPN: LM393APSR ✓ فعال
38 V Vdss 3.5 nA Id 8-pin SOP (PS), tape and reel Package
حداقل سفارش: 1 |

LM393APSR نمای کلی

The Texas Instruments LM393APSR is a precision dual differential comparator with two independent comparison channels, a 38 V maximum supply rating, and open-collector outputs in an 8-pin SOP package. The device operates from a single positive supply and is specified for industrial-grade ambient temperatures from 0°C to 70°C.

A differential comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM393APSR belongs to the comparator hierarchy within analog and mixed-signal semiconductors, where open-collector outputs are useful for level translation, wired logic, and systems requiring an external pull-up resistor.

Key specifications include a low input offset voltage of 0.37 mV, a low input bias current of 3.5 nA, and a supply current of 200 µA per comparator. The maximum rating reaches 38 V, while the differential input range extends to ±38 V. An open-collector output can sink logic-level current and connect to TTL, MOS, or CMOS-compatible pull-up networks.

Each of the two channels is electrically independent, allowing simultaneous comparisons or separate threshold-monitoring tasks. The open-collector architecture provides useful flexibility: output rise time is determined by the pull-up resistor and associated capacitance rather than solely by an internal active pull-up. This also permits wired-open-drain logic and level translation between systems with different voltage domains.

Typical uses include industrial control and monitoring, sensor threshold detection, overvoltage and undervoltage supervision, automotive-style battery monitoring, switching-power-supply feedback loops, and general-purpose signal conditioning. The wide supply and differential-input ratings are particularly useful in systems where signal or supply transients may exceed ordinary low-voltage logic levels.

For reliable operation, place the pull-up resistor close to each open-collector output and verify the input common-mode range at the actual supply voltage. Decoupling capacitors should connect directly between the supply and ground pins. PCB signal-trace lengths should remain short to reduce noise pickup on high-impedance comparator inputs.

This page combines the official LM393A family information, package and ordering details, compatible comparison options, and practical implementation guidance. It helps engineers evaluate pin compatibility, output architecture, input characteristics, thermal limits, and replacement options before integrating the comparator into a new PCB.

جایگزین‌های drop-in برای LM393APSR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM393APSR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Number of Channels, Output Type, Operating Temperature Range.

Texas Instruments
Package: 8-SOIC
Number of Channels: 2 channels
Operating Temperature Range: 0 C to +70 C
مقایسه با LM393APSR →
Texas Instruments
Package: 8-pin SOIC
Number of Channels: 2 channels
Output Type: Open-collector
مقایسه با LM393APSR →

LM393BPS

✅ جایگزین مستقیم
📦 8-pin SOP (PS)
Retains the 38 V supply-class rating and 8-pin open-collector footprint; the B-version improves comparator specifications, while the exact offset and current deltas require confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2903PSR

✅ جایگزین مستقیم
📦 8-pin SOP (PS)
Uses the same 8-pin open-collector comparator architecture, but the related LM2903 maximum supply rating is 36 V versus 38 V for LM393A, a 2 V reduction.

📋 جایگزین مرجع (خارج از کاتالوگ)

LMV393DR

✅ جایگزین مستقیم
📦 8-pin SOP (PS)
Provides the classic dual open-collector pin arrangement in an 8-pin SOP for low-voltage use, but operates from a substantially lower maximum supply voltage than the 38 V LM393A.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM393ADR

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOP (PS)
Dual differential comparator · 2 channels · Open collector · Includes ground · -38 V to +38 V · TTL, MOS, and CMOS · Commercial grade · 8-SOIC

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM393APSRG4

✅ جایگزین مستقیم
📦 8-pin SOP (PS)
Matches the 38 V LM393A electrical class and 8-pin footprint; the Green RoHS order code changes ordering and compliance marking rather than the core comparison function.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM393APSR حداکثر مقادیر مجاز و مشخصات الکتریکی

Comparator Type Dual differential comparator
Number of Channels 2 independent channels
Maximum Supply Voltage 38 V
Differential Input Voltage Range -38 V to +38 V
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
جریان تغذیه 200 µA per comparator
نوع خروجی Open collector
Logic Compatibility TTL, MOS, and CMOS compatible
ESD Rating HBM 2 kV
محدوده دمای کاری 0°C to +70°C
Product Grade Industrial grade
بسته‌بندی 8-pin SOP (PS), tape and reel
نوع نصب Surface mount

راهنمای پیکربندی پین LM393APSR 8-pin sop (ps), tape and reel

پیکربندی پین برای LM393APSR (پکیج 8-pin sop (ps), tape and reel). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin sop (ps), tape and reel برای LM393APSR

داده پین‌آوت تفصیلی موجود نیست برای LM393APSR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM393APSR مناسب است برای 6 کاربردs: Industrial Threshold Monitoring, Battery Voltage Supervision, Sensor Signal Conditioning, Power Supply Control, Wired Logic and Level Translation, Automotive Electrical Monitoring.

🏭

Industrial Threshold Monitoring

The LM393APSR fits industrial threshold monitoring because each of its two channels compares a signal against an independent reference with a specified input offset of 0.37 mV and input bias current of 3.5 nA. Place the reference and sensed voltage on the inverting and non-inverting inputs, then use an open-collector pull-up to drive a digital input. The 38 V maximum supply rating provides margin for industrial rails, while the 0°C to 70°C industrial temperature range supports factory equipment. Designers should verify the common-mode input range at the selected supply voltage and account for output saturation when the pull-up current exceeds the comparator’s sink capability.

⚡

Battery Voltage Supervision

The LM393APSR can supervise battery or DC-system rails when the monitored voltage fits the applicable common-mode range. One channel may detect an overvoltage condition and the other an undervoltage condition, using external reference dividers and separate open-collector outputs. Its 38 V maximum supply rating is useful for industrial battery packs, while the 0.37 mV input offset supports precise threshold placement. The implementation must prevent the input pins from exceeding their permitted range, account for divider tolerance and hysteresis, and use pull-up rails appropriate for the system receiving the fault signals.

🧩

Sensor Signal Conditioning

The LM393APSR is useful for converting a slowly changing sensor signal into a logic event by comparing the sensor against a reference. The 3.5 nA input bias current limits loading of high-impedance sensor networks, and the 0.37 mV offset supports accurate decisions near the reference level. Each independent channel can process a different threshold or can implement complementary detection with external feedback. Because the output is open collector, a pull-up resistor can set the interface voltage for TTL, MOS, or CMOS logic. Add deliberate hysteresis to prevent chatter around the switching threshold and route the high-impedance input traces away from switching nodes.

🔧

Power Supply Control

The LM393APSR can support power-supply control loops by comparing a scaled feedback voltage with a reference and driving a control input through its open-collector output. Its dual-channel arrangement allows independent overvoltage and undervoltage checks or two stages of supervisory control. The comparator’s 38 V supply-class rating supports wide-input industrial designs, while its low 200 µA-per-comparator supply current limits overhead in auxiliary monitoring circuits. Feedback dividers, compensation components, and the pull-up network must be designed around the intended switching topology. The open-collector output can pull an enable or control node low, but it cannot directly drive a high-voltage gate without an appropriate driver stage.

🌐

Wired Logic and Level Translation

The LM393APSR’s open-collector output supports wired-open-drain logic and level translation because the pull-up rail, rather than the output stage, establishes the high voltage. This allows a sensor or supervisory circuit to interface with logic operating at a different voltage. Two independent channels can implement wired AND behavior or combine fault signals. The design trade-off is that output rise time is set by the pull-up resistance and the capacitance of the connected bus. Use a pull-up strong enough to meet the receiver’s rise-time requirement but weak enough to remain within the comparator’s sink-current limit. Keep the bus short and use Schmitt action or external hysteresis where noisy conditions could cause multiple transitions.

🚗

Automotive Electrical Monitoring

The LM393APSR can be evaluated for automotive electrical monitoring when the complete operating environment is compatible with its 0°C to 70°C industrial rating. Its two channels support independent checks of a vehicle electrical rail, such as overvoltage and undervoltage conditions, while the 38 V maximum supply rating accommodates higher-voltage systems. The open-collector outputs are convenient for wired fault signals with external pull-ups. Automotive qualification requirements must be checked separately because the exact LM393APSR suffix is not presented as an AEC-Q100-qualified variant. Any candidate device should also be reviewed for load dump, transient immunity, temperature range, and automotive production requirements.

خلاصه محصولات پیشنهادی

LM393APSR Texas Instruments استفاده‌شده در: Industrial Threshold Monitoring, Battery Voltage Supervision, Sensor Signal Conditioning, Power Supply Control, Wired Logic and Level Translation, Automotive Electrical Monitoring LM2903PSR Related open-collector comparator family استفاده‌شده در: Industrial Threshold Monitoring, Battery Voltage Supervision, Power Supply Control, Automotive Electrical Monitoring LM393BPS B-version dual comparator family option استفاده‌شده در: Sensor Signal Conditioning LMV393DR Low-voltage open-collector interface option استفاده‌شده در: Wired Logic and Level Translation
Where can I buy LM393APSR online?
The LM393APSR can be requested through the “Request a Quote” form on this page, where the exact Texas Instruments ordering code, package, quantity, and delivery requirements can be reviewed. The part is a dual open-collector comparator in an 8-pin SOP package. Texas Instruments describes LM393A as an industrial-grade precision comparator family, and LM393APSR is the surface-mount, tape-and-reel ordering option.
What is the price of LM393APSR?
Use the “Request a Quote” form on this page to obtain the current LM393APSR quotation. The request should identify one unit and the required order quantity, along with any reel, packaging, or delivery preference. The LM393APSR is a standard Texas Instruments industrial-grade 8-pin SOP comparator ordering code, allowing the quote request to be matched directly to the exact MPN.
What is the lead time for LM393APSR?
Current lead time should be requested through the “Request a Quote” form on this page. Include the required quantity, production schedule, and shipment destination so the supplier can confirm the available LM393APSR schedule. Texas Instruments identifies LM393A as an industrial-grade precision dual differential comparator family, and LM393APSR is identified as the 8-pin SOP ordering option.
Is LM393APSR in stock?
Request current LM393APSR availability through the “Request a Quote” form on this page. Include the quantity, reel or cut-tape preference, and required delivery date. The exact device is an 8-pin SOP, industrial-grade, dual comparator with open-collector outputs, allowing the request to be checked against the precise LM393APSR ordering code rather than a generic LM393 family number.
What are the key specifications of LM393APSR that engineers should know?
The LM393APSR is a dual, independent, open-collector differential comparator rated for a 38 V maximum supply voltage. According to the Texas Instruments LM393A documentation, its low input offset voltage is 0.37 mV, input bias current is 3.5 nA, and supply current is 200 µA per comparator. It is offered in an 8-pin SOP package for industrial temperatures from 0°C to 70°C.
Where do I download the LM393APSR datasheet PDF?
The official LM393A product page at Texas Instruments provides the manufacturer documentation and ordering information for LM393APSR. The product family is described as a precision dual differential comparator for industrial use, with the APSR option specifying an 8-pin SOP package and tape-and-reel shipping format. Use the manufacturer datasheet for the complete electrical characteristics, pin descriptions, and test conditions.
Where can I find the LM393APSR pinout?
Use the pin-description diagram and pin table in the official Texas Instruments LM393A datasheet to assign PCB nets for LM393APSR. The device contains two differential comparator channels in an 8-pin SOP package, with each channel providing inverting, non-inverting, output, and supply connections. The manufacturer pinout should govern PCB routing because channel and exposed-package details must match the exact drawing.
LM393APSR vs LM393B — which comparator should I choose?
Choose LM393APSR when the design calls specifically for the original LM393A performance and ordering code; choose an LM393B-family device when its improved operating characteristics are desirable and confirmed pin-compatible. Texas Instruments states that the B-version is a drop-in replacement for LM393, LM293, and LM2903. Both families use open-collector differential-comparator architecture, but the final selection must also satisfy the required supply, common-mode input, and package limits.
LM393APSR vs LM2903PSR — can LM2903PSR replace it?
LM2903PSR can be considered only after checking the application’s voltage, input-range, temperature, and output requirements because LM2903 is a related rather than identical device. The LM393A family supports a maximum supply rating of 38 V, while related LM2903 devices are normally associated with a lower 36 V class rating. Both use an 8-pin SOP format and open-collector outputs, but the 2 V rating difference matters in high-voltage designs.
When should I choose LM393APSR over LMV393?
Choose LM393APSR when the circuit can present input or supply voltages beyond the low-voltage operating region of LMV393. The LM393A family has a 38 V maximum rating and a ±38 V differential input range, while LMV393 is intended for lower-voltage operation. LMV393 may suit battery-powered or low-voltage systems where lower power is more important, provided its common-mode range covers the actual signal.
Is LM393APSR suitable for battery monitoring?
The LM393APSR is suitable for battery-monitoring thresholds when the monitored voltage remains within the comparator’s applicable common-mode and supply limits. Its 0.37 mV input offset supports precise threshold decisions, and the 38 V maximum rating accommodates higher-voltage industrial systems. For series cells, input protection, open-collector pull-up voltage, and the output saturation limit must all be checked against the battery operating range.
What can replace LM393APSR?
The closest replacement candidates are dual open-collector comparators in an 8-pin SOP package, including the LM393B family and appropriately packaged LM2903 variants. A valid replacement must match the footprint, pin functions, supply range, input common-mode range, output sink current, and temperature rating. Texas Instruments identifies the B-version as a drop-in replacement for LM393, but engineers should still verify the exact suffix and operating limits before substitution.
What is the best cross-brand equivalent for LM393APSR?
LMV393DR is a relevant cross-brand option because it is presented as a pin-compatible, low-power alternative to the classic LM393. It is most appropriate in low-voltage systems where its supply and common-mode ranges cover the signal. It is not automatically interchangeable in high-voltage designs because the LM393A family supports a 38 V maximum rating while LMV393 is a lower-voltage comparator family.
Does LM393APSR have open-collector outputs?
The LM393APSR has two open-collector outputs, one for each independent comparator channel. According to the Texas Instruments LM393A family description, the outputs are compatible with TTL, MOS, and CMOS systems when used with an appropriate pull-up resistor. Open-collector architecture supports wired logic and flexible voltage-level translation, but output rise time depends on the pull-up resistance and total bus capacitance.
How should an LM393APSR open-collector output be wired?
Connect a pull-up resistor from each open-collector output to the logic supply used by the receiving circuit. The LM393APSR output transistor pulls the line toward ground when active and releases it when inactive, allowing the pull-up to establish the high voltage. Choose the resistance using the required sink current, rise-time, bus capacitance, and power dissipation, and keep the pull-up connection short to limit susceptibility to EMI.

داده‌های مرجع مهندسی برای LM393APSR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM393APSR for an industrial 8-pin SOP design that needs two independent open-collector comparators, a 38 V maximum supply rating, a 0.37 mV input offset, and 3.5 nA input bias current. It is particularly appropriate for threshold detection, battery monitoring, and wired fault signals where the pull-up rail can be selected independently. Choose LM393BPS when the improved B-version performance is required while retaining the same footprint and comparator architecture. Choose LM2903PSR when its lower 36 V-class voltage rating is acceptable and its broader temperature positioning better matches the product environment. Choose LMV393DR for low-voltage systems where lower power is more important and the signal stays within its reduced operating range. For every replacement, verify the exact pinout, common-mode input limits, output sink capability, temperature rating, and pull-up arrangement before production release.

مقایسه با جایگزین‌ها

پارامتر این محصول LM393BPS LM2903PSR LMV393DR LM393ADR LM393APSRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOP (PS) 8-pin SOP (PS) - same 8-pin SOP (PS) - same 8-pin SOP (PS) - same 8-pin SOP (PS) - same 8-pin SOP (PS) - same
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator
Output Type Open collector Open collector Open collector Open collector Open collector Open collector

تفاوت‌های کلیدی

  • Higher voltage headroom than LM2903 (در مقابلLM2903PSR)
  • Low input offset supports precise thresholds (در مقابلLMV393DR)
  • Dual independent open-collector channels (در مقابلLM2903PSR)
  • Direct SOIC footprint reuse (در مقابلLM393BPS)

یادداشت‌های طراحی

Route each open-collector output directly to its pull-up resistor and receiving circuit to minimize loop area and switching noise. Keep the comparator input traces short and away from power-switching nodes, inductors, and high-current return paths. Place the supply bypass capacitor directly between the device supply and ground pins, with a short ground return. Because the inputs can present very high impedance, keep surrounding copper and test-point leakage in mind when setting accurate thresholds.

The pull-up resistor sets the output high level and determines the open-collector sink current. Select it so the maximum low-state current remains below the comparator’s output sink limit, while the resistance and total bus capacitance provide the required rise time. Estimated relationship: output rise time is approximately 2.2 times pull-up resistance times total bus capacitance. Confirm that the pull-up supply voltage is permitted by the output structure and that its current remains within system power limits.

Do not assume that the 38 V maximum supply rating permits every input to remain at 38 V under all operating conditions. Verify the common-mode input range, differential input limit, and supply-current behavior at the actual rail voltage. Also add hysteresis around thresholds where noise or slow input slopes could cause output chatter. For battery systems, the pull-up rail must remain present long enough for downstream circuitry to interpret the open-collector fault signal reliably.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The exact LM393APSR ordering suffix is identified as an industrial-grade 8-pin SOP comparator. No exact RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was established for this suffix.

تاریخ تأیید داده‌ها: 2026-11-13 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM393APSR datasheet LM393APSR pinout LM393APSR datasheet pdf LM393APSR equivalent LM393APSR replacement LM393APSR cross reference LM393APSR price LM393APSR stock Texas Instruments LM393APSR LM393APSR vs LM2903PSR LM393APSR open collector output LM393APSR 8-SO footprint

قطعات و اصطلاحات مرتبط

Texas Instruments LM393APSR LM393A LM393BPS LM2903PSR LMV393DR LM393ADR LM393APSRG4 dual differential comparator comparator analog integrated circuit semiconductor open-collector output open-drain logic input offset voltage input bias current supply current common-mode input voltage 8-pin SOP SOIC family surface-mount package battery monitoring industrial threshold detection TTL compatibility RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ