LPC1823JBD144E - 180MHz Cortex-M3 512KB MCU | NXP
MPN： LPC1823JBD144E ✓ 啟用中LPC1823JBD144E 概覽
A microcontroller is a programmable system-on-chip that integrates a CPU core, flash program memory, data memory, peripheral interfaces, and debug support into one package. The LPC18xx family sits within the Arm Cortex-M3 category of 32-bit embedded microcontrollers, combining deterministic interrupt-driven operation with a broad set of communication and timing peripherals for industrial control equipment.
The LPC1823JBD144E combines a 180 MHz maximum operating frequency with 512 KB of flash in a single 144-pin LQFP package. Its 144-pin footprint provides a generous connection count for external memory, communication interfaces, and mixed-signal control systems, while the 20 x 20 mm body keeps the design compatible with conventional surface-mount assembly and multilayer PCB layouts.
Compared with smaller Cortex-M devices, the LPC1823JBD144E provides substantial embedded flash capacity and a large pin count for projects that need multiple external interfaces. The 144-LQFP package exposes more I/O than compact QFN or 48-pin packages, making it suitable for control boards that connect sensors, actuators, communications transceivers, and human-interface circuitry through one microcontroller.
Typical uses include industrial automation controllers, embedded gateways, communications equipment, data-acquisition systems, and motor-control platforms. The 512 KB flash budget supports larger embedded firmware, protocol stacks, and application logic, while the 180 MHz Cortex-M3 core provides the processing headroom expected by connected embedded products.
Board design should follow the manufacturer pin-description table when assigning every signal, especially the power, ground, clock, reset, and debug functions across 144 pins. Preserve the specified decoupling and layout guidance, provide a valid clock source and reset path, and confirm that the programmed firmware and peripheral assignments match the industrial-temperature ordering option before production release.
This page combines distributor availability details, manufacturer product information, family-level drop-in alternatives, application guidance, and design notes to support component selection, PCB planning, firmware bring-up, and sourcing review for the LPC1823JBD144E.
直接替換替代品，適用於 LPC1823JBD144E — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： LPC1823JBD144E （相同外形與佔位） — 差異在於 Product Type, Flash Memory, LCD Interface, Package.
LPC1822JBD144E
✅ 直接替換聯絡詢價
查看資料表 →LPC1823JBD144
✅ 直接替換📋 參考替代品（不在目錄中）
LPC1830FBD144K
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LPC1821JBD144E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
LPC1822JBD144
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
LPC1823JBD144E 最大額定值與電氣特性
| Product Type | High-performance 32-bit microcontroller |
| CPU Core | Arm Cortex-M3 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| Package Type | LQFP, gull wing, 144 terminals |
| Package Body Size | 20 x 20 mm |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial |
| Core Architecture | Arm Cortex-M3 |
| Application | Embedded industrial control |
LPC1823JBD144E 20 x 20 mm 腳位配置指南
LPC1823JBD144E（20 x 20 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： LPC1823JBD144E.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC1823JBD144E 適用於 6 應用s: Industrial Automation Controller, Embedded Communications Gateway, Data-Acquisition and Monitoring System, Motor Control and Power Conversion Platform, Human-Machine Interface Controller, Secure Network Appliance Controller.
Industrial Automation Controller
The LPC1823JBD144E fits an industrial automation controller that combines control logic, communications, and real-time I/O on one board. Its 180 MHz Arm Cortex-M3 core provides processing headroom for control loops, state machines, and diagnostics, while 512 KB of flash accommodates application firmware, drivers, and communication protocols. The 144-terminal LQFP package offers more external connections than compact MCU packages, simplifying access to sensors, actuators, and expansion interfaces. Route power, ground, clock, and debug signals according to the NXP layout guidance, and isolate noisy switching stages from precision analog sections.
推薦
Embedded Communications Gateway
The LPC1823JBD144E is appropriate for an embedded gateway that must consolidate serial, network, and field-bus data before forwarding it to a host or cloud service. The 180 MHz Cortex-M3 core can execute protocol stacks, packet filtering, and local buffering, and 512 KB of flash provides room for a bootloader, application code, and configuration data. Its 144 pins simplify the connection of multiple transceivers and status signals without requiring a very large package. Keep Ethernet and high-speed USB routing short and controlled, and use the exact NXP interface configuration when assigning communication-capable pins.
推薦
Data-Acquisition and Monitoring System
The LPC1823JBD144E can serve as the supervisory controller in a data-acquisition system that samples sensors, timestamps records, and reports operating status. Its 512 KB of embedded flash is useful for buffering configuration, calibration tables, and diagnostic logs, while the 180 MHz core handles scheduled acquisition tasks and communication servicing. The 144-terminal LQFP package provides sufficient pin count for sensor inputs, trigger signals, status indicators, and serial interfaces. Maintain clean grounding and controlled analog supply paths, and use the manufacturer pin table to avoid conflicts between high-speed digital and sensitive analog functions.
推薦
Motor Control and Power Conversion Platform
The LPC1823JBD144E can coordinate a motor-control platform that generates command sequences, monitors feedback, and handles protection status from external power stages. The 180 MHz Cortex-M3 core supports deterministic current-loop or position-control software, and the 512 KB flash budget can hold control algorithms plus fault-handling logic. Its 144 pins allow dedicated connections for pulse-width-modulated outputs, encoder inputs, current sensing, and gate-driver enable signals. Keep switching-node layouts away from the MCU supply and reference pins, and verify all timing and peripheral assignments against the NXP datasheet.
推薦
Human-Machine Interface Controller
The LPC1823JBD144E supports a human-machine interface controller that manages displays, buttons, encoders, and status feedback while coordinating background communications. Its 180 MHz core can drive display updates and input handling while leaving processing capacity for supervisory tasks, and 512 KB of flash accommodates interface firmware, graphics data, and communication code. The 144-terminal LQFP provides a broad I/O pool for display interfaces, key matrices, and indicator outputs. Keep display and switching signals isolated from sensitive analog returns, and route the debug connector so production programming remains accessible.
推薦
Secure Network Appliance Controller
The LPC1823JBD144E fits a secure embedded appliance controller that manages network links, local storage access, and authenticated configuration. The 512 KB flash capacity supports a bootloader, firmware image, network stack, and cryptographic configuration data, while the 180 MHz Cortex-M3 core supports concurrent protocol servicing and health monitoring. The 144-pin package accommodates Ethernet, serial debug, storage-control, and watchdog connections in one controller design. Apply the manufacturer's decoupling and layout recommendations, provide a reliable reset and clock implementation, and validate firmware security controls independently of the MCU hardware selection.
推薦
推薦產品摘要
工程參考資料，適用於 LPC1823JBD144E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC1822JBD144E | LPC1823JBD144 | LPC1830FBD144K | LPC1821JBD144E |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) - same footprint | LQFP-144 (20x20 mm) - same footprint | LQFP-144 (20x20 mm) - same footprint | LQFP-144 (20x20 mm) - same footprint |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Pin Count | 144 terminals | 144 terminals | 144 terminals | 144 terminals | 144 terminals |
| Package Body Size | 20 x 20 mm | 20 x 20 mm | 20 x 20 mm | 20 x 20 mm | 20 x 20 mm |
| Ordering Suffix | E | E | No E suffix shown | K | E |
主要差異化特點
- Provides the specified 180 MHz Cortex-M3 performance with 512 KB of flash (對比LPC1822JBD144E)
- Uses the same 144-terminal 20 x 20 mm LQFP footprint as the related NXP options (對比LPC1830FBD144K)
- Industrial-temperature ordering designation matches industrial control deployments (對比LPC1823JBD144)
設計說明
Assign all 144 package positions directly from the NXP pin-description table before schematic release, and treat power, ground, clock, reset, and debug pins as layout constraints rather than ordinary GPIO. Place required decoupling close to the associated supply pins, provide a continuous ground reference beneath the device where the package drawing permits, and route sensitive clock lines away from switching nodes and high-current outputs.
Build the supply network around the exact operating-voltage limits, current requirements, and decoupling configuration stated in the manufacturer data sheet. Because the LPC1823JBD144E can run at 180 MHz and drive external interface circuitry, include local bulk capacitance, verify startup current behavior, and confirm that the regulator has adequate headroom for the configured load plus transient margin before PCB release.
Keep the Cortex-M3 clock path short and return it to a clean ground reference, and preserve the manufacturer's guidance for reset and debug signals. If Ethernet, USB, or other high-speed interfaces are populated, route them as controlled-impedance nets with continuous reference planes and keep switching-node copper and magnetics away from sensitive analog and clock areas. Validate signal integrity with the actual stack-up and enclosure.
Do not substitute a mechanically identical LQFP-144 device based only on the package outline. Confirm flash density, temperature grade, ordering suffix, peripheral configuration, and every signal connected to the PCB. The family shares a common footprint, but device variants can change memory organization or peripheral assignments. Use the NXP LPC1823JBD144 documentation as the controlling reference for the original design.
合規資訊
The verified product information identifies an industrial-temperature grade but does not provide RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. No unverified environmental or automotive claim is assigned.
