Analog Devices

LT1055ACH - 16V/us Precision JFET Op Amp | Analog Devices

MPN: LT1055ACH ✓ 啟用中
50 uV Vdss 40 pA Id TO-5 metal-can package Package
MOQ: 1 |

LT1055ACH 概覽

The Analog Devices LT1055ACH is a precision, high-speed JFET-input operational amplifier with a 16 V/us slew rate, 6.5 MHz gain-bandwidth product, and typically 50 uV input offset voltage in a TO-5 metal-can package. Its precision is maintained with typically 1.2 uV/°C offset drift, while the JFET input stage provides very low bias current, including 40 pA at 70°C and 500 pA at 125°C.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high open-loop gain. The LT1055ACH belongs to the precision JFET-input operational-amplifier family, combining low input bias current with substantially higher speed than many conventional precision amplifiers. This combination makes it useful for instrumentation, sensor conditioning, buffer, and signal-processing circuits that must preserve weak signals without introducing excessive bias error.

Key performance features include a guaranteed maximum offset voltage of 150 uV, a guaranteed maximum drift of 4 uV/°C, and guaranteed input bias current of 150 pA at 70°C and 2.5 nA at 125°C. The simultaneous availability of 16 V/us slew rate and 6.5 MHz gain-bandwidth product distinguishes the LT1055 from slower precision JFET amplifiers. These characteristics support accurate amplification of signals containing both low-level DC information and higher-frequency content.

The LT1055/LT1056 family combines precision specifications with high-speed performance. Its JFET input stage supports low-current measurements, while its offset and drift characteristics improve DC accuracy in instrumentation chains. The 16 V/us slew rate allows the amplifier to respond quickly to moderate-amplitude signal changes without imposing the slew-rate limits associated with many precision-only amplifiers.

Typical uses include low-level transducer conditioning, buffered sensor outputs, laboratory instrumentation, photodiode amplifiers, audio and communication signal paths, active filters, and analog measurement systems. The TO-5 package provides a conventional through-hole mechanical format suitable for instrumentation equipment and designs requiring a metal-can package rather than a surface-mount outline.

When designing around the LT1055ACH, use the manufacturer's pinout and connection guidance to preserve the common JFET-input configuration and provide appropriate output-load isolation. Input and feedback networks should be arranged to minimize parasitic capacitance and leakage, particularly when measuring currents in the picoamp range. Verify operating supply range, input common-mode limits, output swing, and thermal performance against the manufacturer datasheet before releasing the design.

This page combines the manufacturer's published performance figures with practical selection guidance, drop-in family information, application-oriented design notes, and a parameter comparison for engineers evaluating the LT1055ACH in precision analog signal chains.

直接替換替代品,適用於 LT1055ACH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LT1055ACH (相同外形與佔位) — 差異在於 Amplifier Type, Mounting Type, Package, Slew Rate, Typical Input Offset Voltage.

Analog Devices
Amplifier Type: Precision JFET-input operational amplifier
Mounting Type: Through-hole metal can
Package: 8-pin TO-5 metal can
比較對象 LT1055ACH →

LT1056ACH

✅ 直接替換
Analog Devices
📦 TO-5
Precision JFET-input operational amplifier · 1 circuit · 6.5 MHz · 16 V/µs · 50 µV · 150 µV · 1.2 µV/°C · 4 µV/°C

聯絡詢價

查看資料表 →

LT1055ACH 最大額定值與電氣特性

Amplifier Type Single operational amplifier
Input Transistor Type JFET
Number of Circuits 1 circuit
Slew Rate 16 V/us
Gain-Bandwidth Product 6.5 MHz
Typical Input Offset Voltage 50 uV
Maximum Input Offset Voltage 150 uV
Typical Input Offset Voltage Drift 1.2 uV/°C
Maximum Input Offset Voltage Drift 4 uV/°C
Typical Input Bias Current at 70°C 40 pA
Typical Input Bias Current at 125°C 500 pA
Guaranteed Input Bias Current at 70°C 150 pA maximum
Guaranteed Input Bias Current at 125°C 2.5 nA maximum
封裝 TO-5 metal-can package
安裝類型 Through-hole
RoHS 狀態 unknown
REACH Status unknown

LT1055ACH to-5 metal-can package 腳位配置指南

LT1055ACH(to-5 metal-can package 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LT1055ACH 的 to-5 metal-can package 封裝腳位圖

無詳細腳位定義資料: LT1055ACH.

請參閱 資料表 以查看完整腳位配置。

典型應用

LT1055ACH 適用於 6 應用s: Precision Transducer Signal Conditioning, High-Impedance Current Detection, Laboratory Instrumentation Buffer, Photodiode Amplifier, Active Filter and Signal Conditioning, Audio and Communication Signal Path.

🏭

Precision Transducer Signal Conditioning

The LT1055ACH fits low-level transducer conditioning because its input offset voltage is typically 50 uV, maximum guaranteed offset is 150 uV, and input bias current is typically 40 pA at 70°C. Place it in a noninverting or differential gain stage to preserve sensor accuracy without introducing excessive DC error. The 16 V/us slew rate also allows the same amplifier to reproduce moderate-frequency sensor signals while retaining the precision characteristics needed for calibration. Feedback resistors should be selected for the intended gain, and the input network should minimize leakage and contamination on high-impedance nodes.

⚡

High-Impedance Current Detection

The LT1055ACH is appropriate for current-to-voltage detection stages that place the amplifier across a high-value sense resistor. Its input bias current of 40 pA typical at 70°C produces substantially less error than a higher-bias general-purpose amplifier, while the guaranteed 150 pA limit at 70°C provides a defined upper bound for error budgeting. The 6.5 MHz gain-bandwidth product supports bandwidth beyond static current measurements. Keep the sense-resistor terminals and amplifier input traces short, guard sensitive nodes where appropriate, and verify that leakage in the PCB and connectors does not dominate the measurement.

🖥️

Laboratory Instrumentation Buffer

The LT1055ACH can buffer laboratory sources and sensor outputs where both DC accuracy and transient response matter. Its 50 uV typical offset and 1.2 uV/°C typical drift reduce calibration movement, while 16 V/us slew rate handles output steps more effectively than a slow precision amplifier. Configure it as a unity-gain voltage follower only when stability and capacitive-load requirements are satisfied, or add a conventional feedback network for gain and bandwidth control. Low-noise grounding, short feedback loops, and careful supply decoupling are essential when the buffered signal feeds precision converters or measurement instruments.

📷

Photodiode Amplifier

The LT1055ACH is suitable for photodiode current amplification because its JFET input stage provides low bias current and its input offset voltage is limited to 150 uV maximum. Use the amplifier with a transimpedance feedback resistor and diode capacitance compensation appropriate to the selected feedback resistance. The 6.5 MHz gain-bandwidth product provides meaningful bandwidth for moderate-speed optical signals, and the 16 V/us slew rate improves response to transient photocurrent changes. Guard against photodiode or feedback-resistor leakage, keep input traces short, and account for the added feedback capacitance required to maintain stability.

🔧

Active Filter and Signal Conditioning

The LT1055ACH can implement active filters that require low input bias, low offset, and more bandwidth than conventional precision-only amplifiers. Its 6.5 MHz gain-bandwidth product and 16 V/us slew rate support signal processing across audio and low-frequency instrumentation ranges. Use the manufacturer's recommended noise-gain arrangement to maintain stability, particularly with photodiode, cable, or sensor capacitance at the input. Because offset drift and bias current increase with temperature, include the 4 uV/°C maximum drift and 2.5 nA maximum bias current at 125°C in worst-case error budgets before tightening the usable measurement range.

🌐

Audio and Communication Signal Path

The LT1055ACH is applicable to audio and communication signal paths where low input bias and accurate small-signal reproduction are important. Its 16 V/us slew rate reduces large-signal distortion compared with amplifiers optimized only for offset accuracy, and its 6.5 MHz gain-bandwidth product supports a broad low-frequency signal range. In a practical implementation, use stable feedback components and ensure the source impedance does not create excessive noise-gain peaking. Keep the input and output return paths compact, decouple supply rails near the device, and verify output swing and load behavior against the manufacturer limits for the selected gain and supply voltage.

What is the LT1055ACH?
The LT1055ACH is a precision, high-speed JFET-input operational amplifier with a 16 V/us slew rate, 6.5 MHz gain-bandwidth product, and typically 50 uV input offset voltage. According to the Analog Devices LT1055 product information, it is packaged in a TO-5 metal-can format and is intended for instrumentation and low-level analog signal-conditioning applications.
What are the key specifications of LT1055ACH that engineers should know?
The LT1055ACH combines a 16 V/us slew rate, 6.5 MHz gain-bandwidth product, typically 50 uV offset voltage, and typically 1.2 uV/°C drift. The Analog Devices manufacturer information also specifies 40 pA typical input bias current at 70°C, rising to 500 pA at 125°C. These specifications position the device for precision measurements that also require relatively fast signal response.
What is the slew rate of the LT1055ACH?
The LT1055ACH has a slew rate of 16 V/us. According to the Analog Devices LT1055 product page, this speed is achieved simultaneously with a 6.5 MHz gain-bandwidth product. The combination allows the amplifier to follow moderate-amplitude signal changes more quickly than many precision-only operational amplifiers.
What is the input bias current of LT1055ACH?
The LT1055ACH provides 40 pA typical input bias current at 70°C and 500 pA at 125°C. According to the LT1055 manufacturer documentation, the guaranteed limits are 150 pA at 70°C and 2.5 nA at 125°C, making the device suitable for high-impedance transducers and precision current-measurement circuits.
Where can I download the LT1055ACH datasheet PDF?
The LT1055ACH datasheet PDF is available from the official Analog Devices LT1055/LT1056 data sheet at analog.com. The document covers the family's precision offset, drift, bias-current, slew-rate, gain-bandwidth, and electrical characteristics. Use the pin-description and electrical-characteristics tables when assigning connections and validating operating limits.
Where can I find the LT1055ACH pinout?
The LT1055ACH pinout is shown in the official Analog Devices LT1055/LT1056 datasheet under the package and pin-configuration information. The LT1055ACH is offered in a TO-5 package, so the pin count and numbering must be checked against that package drawing rather than inferred from a generic operational-amplifier outline.
Is the LT1055ACH suitable for precision instrumentation?
The LT1055ACH is suitable for precision instrumentation because its maximum input offset voltage is 150 uV, maximum drift is 4 uV/°C, and input bias current remains low as temperature rises. According to the Analog Devices manufacturer information, the 16 V/us slew rate and 6.5 MHz gain-bandwidth product also allow the device to handle signals requiring more bandwidth than a conventional precision-only amplifier.
LT1055ACH vs LT1056ACH — which is better for low-level measurement?
LT1055ACH and LT1056ACH are closely related precision JFET-input amplifiers in the same TO-5 family, and the manufacturer describes both with 16 V/us slew rate and 6.5 MHz gain-bandwidth product. The choice should be based on the exact LT1055 or LT1056 electrical tables for offset, drift, bias current, supply voltage, and temperature requirements before selecting either device.
What is the best drop-in replacement for LT1055ACH?
The closest documented drop-in-family candidate is the Analog Devices LT1056ACH, which uses the same TO-5 mechanical format and belongs to the same LT1055/LT1056 precision JFET-input family. A final replacement decision requires checking supply voltage, common-mode range, offset limits, bias current, electrical limits, and temperature grade against the original design.
Can LT1056ACH replace LT1055ACH without changing the PCB?
LT1056ACH can share the TO-5 package format with LT1055ACH, making it a possible board-level replacement after electrical verification. However, package compatibility alone does not guarantee interchangeability. Confirm the exact pin configuration, supply requirements, input common-mode range, output swing, offset, drift, bias current, and application-specific margins before approving the substitution.
When should I choose LT1055ACH over LT1056ACH?
Choose LT1055ACH when its exact offset, drift, bias-current, supply-voltage, and temperature limits satisfy the circuit better than the corresponding LT1056ACH limits. Both devices belong to the same high-speed precision JFET family, so the decision should be made from the individual manufacturer electrical tables rather than from package appearance alone.
What can replace LT1055ACH in a TO-5 circuit?
LT1056ACH is the most direct documented family alternative because it uses the same TO-5 format and shares the LT1055/LT1056 performance positioning. The cross-reference information does not identify additional pin-compatible models with enough electrical detail to recommend them, so any other replacement should be treated as a design review rather than an automatic substitution.
Is LT1055ACH the same as LT1056ACH?
No. LT1055ACH and LT1056ACH are related members of the same precision, high-speed JFET-input family, but they are distinct Analog Devices orderable devices. Although both are associated with 16 V/us slew rate and 6.5 MHz gain-bandwidth performance, their individual guaranteed limits must be compared before treating one as an interchangeable replacement.
Where can I buy LT1055ACH online?
Use the Request a Quote form on this XAIPART product page to request LT1055ACH availability, current lead time, and order details. A direct purchase decision should include the required TO-5 package, operating-temperature grade, and quantity so that the quotation corresponds to the exact LT1055ACH configuration.
What is the price of LT1055ACH?
The current commercial terms for LT1055ACH should be obtained through the Request a Quote form on this page. The form allows quantity, package, temperature-grade, and delivery requirements to be included, which is more useful for legacy TO-5 instrumentation supply than a generic market reference.
Is LT1055ACH in stock and what is its lead time?
Current LT1055ACH stock and lead time should be confirmed through the Request a Quote form on this page. For a legacy TO-5 operational amplifier, include the required quantity, target date, and acceptable date-code range so that supply planning can account for manufacturing continuity and packaging requirements.
What standards and compliance apply to LT1055ACH?
The available manufacturer information identifies LT1055ACH as a JFET-input operational amplifier in a TO-5 package but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, or halogen-free status. Treat these compliance fields as unknown until the manufacturer product page or current material-declaration documentation confirms them.

工程參考資料,適用於 LT1055ACH — 比較、設計指引及合規資訊。

選型指南

Choose LT1055ACH when the circuit needs the combination of low JFET-input bias current, tightly specified offset and drift, and enough speed for moderate-frequency signal reproduction. It is particularly suitable for precision instrumentation, high-impedance current detection, photodiode amplification, and measurement buffers where conventional precision amplifiers may be too slow. LT1056ACH is the closest family alternative for a TO-5 design, but it should be selected only after comparing the individual offset, drift, bias-current, supply, common-mode, and temperature specifications. Neither part should be treated as an automatic substitute based solely on its shared package. For new low-noise designs, also consider whether a modern JFET or CMOS-input amplifier could provide lower offset, drift, power consumption, or EMI performance, even if that requires a PCB redesign.

與替代品比較

參數 本產品 LT1056ACH
Brand Analog Devices Analog Devices
Package TO-5 TO-5
Amplifier Type Single JFET-input operational amplifier Single JFET-input operational amplifier
Slew Rate 16 V/us 16 V/us
Gain-Bandwidth Product 6.5 MHz 6.5 MHz

主要差異化特點

  • Combines precision offset with high-speed operation (對比LT1056ACH)
  • Low temperature-dependent input bias current (對比LT1056ACH)
  • TO-5 format supports traditional instrumentation hardware (對比LT1056ACH)

設計說明

Do not treat the LT1055 and LT1056 family descriptions as a complete substitute qualification. Compare the exact LT1055ACH and LT1056ACH rows in the manufacturer electrical tables, including supply voltage, input common-mode range, output swing, guaranteed offset, drift, bias current, and temperature limits. Confirm the TO-5 pin configuration before releasing any substitution to production.

Keep the op-amp input and feedback paths short, and place the feedback resistor or capacitor directly across the relevant device pins. High-impedance inputs are sensitive to surface leakage, contamination, and guard coupling. Use a clean guard around sensitive nodes when measuring picoamp-level currents, and avoid routing high-impedance signals next to switching nodes or digital clock lines.

Use the manufacturer's stability guidance when driving capacitive loads or connecting long shielded cables. The 6.5 MHz gain-bandwidth product and 16 V/us slew rate provide substantial speed, but high-speed feedback layouts can still form unintended poles. Keep the loop area small, place compensation elements at the appropriate pins, and test the completed board across its intended supply and load ranges.

Decouple each supply connection close to the device and verify that the selected supply remains inside the device's operating limits under transient conditions. The LT1055ACH is a linear amplifier, so its power dissipation depends on supply voltage, output voltage, quiescent current, and load current. Check the TO-5 thermal limitations with the intended copper area and ambient temperature rather than assuming metal-can construction eliminates thermal constraints.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose precision operational amplifier.

相關搜尋

LT1055ACH datasheet LT1055ACH pinout LT1055ACH datasheet pdf Analog Devices LT1055ACH LT1055ACH TO-5 op amp LT1055ACH 16V/us slew rate LT1055ACH 6.5MHz bandwidth LT1055ACH JFET input amplifier LT1055ACH equivalent LT1055ACH replacement LT1055ACH vs LT1056ACH LT1055ACH price LT1055ACH stock LT1055ACH instrumentation amplifier

相關元件與詞彙

Analog Devices LT1055ACH LT1056ACH LT1055 LT1056 JFET-input operational amplifier precision operational amplifier instrumentation amplifier voltage amplifier analog integrated circuit semiconductor gain-bandwidth product slew rate input offset voltage input offset voltage drift input bias current TO-5 metal-can package through-hole package signal conditioning transimpedance amplifier photodiode amplifier active filter high-impedance measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情